diff mbox series

[v5,03/24] lib/scatterlist: add flag for indicating P2PDMA segments in an SGL

Message ID 20220128002614.6136-4-logang@deltatee.com (mailing list archive)
State New, archived
Headers show
Series Userspace P2PDMA with O_DIRECT NVMe devices | expand

Commit Message

Logan Gunthorpe Jan. 28, 2022, 12:25 a.m. UTC
Make use of the third free LSB in scatterlist's page_link on 64bit systems.

The extra bit will be used by dma_[un]map_sg_p2pdma() to determine when a
given SGL segments dma_address points to a PCI bus address.
dma_unmap_sg_p2pdma() will need to perform different cleanup when a
segment is marked as a bus address.

Create a CONFIG_NEED_SG_DMA_BUS_ADDR_FLAG bool which depends on
CONFIG_64BIT (so there is space in the page link for the new flag).
CONFIG_PCI_P2PDMA will then depend on this so this means PCI P2PDMA will
require CONFIG_64BIT. This should be acceptable as the majority of P2PDMA
use cases are restricted to newer root complexes and roughly require the
extra address space for memory BARs used in the transactions.

Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
---
 drivers/pci/Kconfig         |  5 +++++
 include/linux/scatterlist.h | 44 ++++++++++++++++++++++++++++++++++++-
 2 files changed, 48 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig
index d98fafdd0f99..3e837d9e1600 100644
--- a/drivers/pci/Kconfig
+++ b/drivers/pci/Kconfig
@@ -164,6 +164,11 @@  config PCI_PASID
 config PCI_P2PDMA
 	bool "PCI peer-to-peer transfer support"
 	depends on ZONE_DEVICE
+	#
+	# The need for the scatterlist DMA bus address flag means PCI P2PDMA
+	# requires 64bit
+	#
+	depends on 64BIT
 	select GENERIC_ALLOCATOR
 	help
 	  Enableѕ drivers to do PCI peer-to-peer transactions to and from
diff --git a/include/linux/scatterlist.h b/include/linux/scatterlist.h
index 7ff9d6386c12..6561ca8aead8 100644
--- a/include/linux/scatterlist.h
+++ b/include/linux/scatterlist.h
@@ -64,12 +64,24 @@  struct sg_append_table {
 #define SG_CHAIN	0x01UL
 #define SG_END		0x02UL
 
+/*
+ * bit 2 is the third free bit in the page_link on 64bit systems which
+ * is used by dma_unmap_sg() to determine if the dma_address is a
+ * bus address when doing P2PDMA.
+ */
+#ifdef CONFIG_PCI_P2PDMA
+#define SG_DMA_BUS_ADDRESS	0x04UL
+static_assert(__alignof__(struct page) >= 8);
+#else
+#define SG_DMA_BUS_ADDRESS	0x00UL
+#endif
+
 /*
  * We overload the LSB of the page pointer to indicate whether it's
  * a valid sg entry, or whether it points to the start of a new scatterlist.
  * Those low bits are there for everyone! (thanks mason :-)
  */
-#define SG_PAGE_LINK_MASK (SG_CHAIN | SG_END)
+#define SG_PAGE_LINK_MASK (SG_CHAIN | SG_END | SG_DMA_BUS_ADDRESS)
 
 static inline unsigned int __sg_flags(struct scatterlist *sg)
 {
@@ -91,6 +103,11 @@  static inline bool sg_is_last(struct scatterlist *sg)
 	return __sg_flags(sg) & SG_END;
 }
 
+static inline bool sg_is_dma_bus_address(struct scatterlist *sg)
+{
+	return __sg_flags(sg) & SG_DMA_BUS_ADDRESS;
+}
+
 /**
  * sg_assign_page - Assign a given page to an SG entry
  * @sg:		    SG entry
@@ -245,6 +262,31 @@  static inline void sg_unmark_end(struct scatterlist *sg)
 	sg->page_link &= ~SG_END;
 }
 
+/**
+ * sg_dma_mark_bus address - Mark the scatterlist entry as a bus address
+ * @sg:		 SG entryScatterlist
+ *
+ * Description:
+ *   Marks the passed in sg entry to indicate that the dma_address is
+ *   a bus address and doesn't need to be unmapped.
+ **/
+static inline void sg_dma_mark_bus_address(struct scatterlist *sg)
+{
+	sg->page_link |= SG_DMA_BUS_ADDRESS;
+}
+
+/**
+ * sg_unmark_pci_p2pdma - Unmark the scatterlist entry as a bus address
+ * @sg:		 SG entryScatterlist
+ *
+ * Description:
+ *   Clears the bus address mark.
+ **/
+static inline void sg_dma_unmark_bus_address(struct scatterlist *sg)
+{
+	sg->page_link &= ~SG_DMA_BUS_ADDRESS;
+}
+
 /**
  * sg_phys - Return physical address of an sg entry
  * @sg:	     SG entry