diff mbox series

[V3,1/1] ublk: add io_uring based userspace block driver

Message ID 20220628160807.148853-2-ming.lei@redhat.com (mailing list archive)
State New, archived
Headers show
Series ublk: add io_uring based userspace block driver | expand

Commit Message

Ming Lei June 28, 2022, 4:08 p.m. UTC
This is the driver part of userspace block driver(ublk driver), the other
part is userspace daemon part(ublksrv)[1].

The two parts communicate by io_uring's IORING_OP_URING_CMD with one
shared cmd buffer for storing io command, and the buffer is read only for
ublksrv, each io command is indexed by io request tag directly, and
is written by ublk driver.

For example, when one READ io request is submitted to ublk block driver, ublk
driver stores the io command into cmd buffer first, then completes one
IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to
ublk driver beforehand by ublksrv for getting notification of any new io request,
and each URING_CMD is associated with one io request by tag.

After ublksrv gets the io command, it translates and handles the ublk io
request, such as, for the ublk-loop target, ublksrv translates the request
into same request on another file or disk, like the kernel loop block
driver. In ublksrv's implementation, the io is still handled by io_uring,
and share same ring with IORING_OP_URING_CMD command. When the target io
request is done, the same IORING_OP_URING_CMD is issued to ublk driver for
both committing io request result and getting future notification of new
io request.

Another thing done by ublk driver is to copy data between kernel io
request and ublksrv's io buffer:

1) before ubsrv handles WRITE request, copy the request's data into
ublksrv's userspace io buffer, so that ublksrv can handle the write
request

2) after ubsrv handles READ request, copy ublksrv's userspace io buffer
into this READ request, then ublk driver can complete the READ request

Zero copy may be switched if mm is ready to support it.

ublk driver doesn't handle any logic of the specific user space driver,
so it should be small/simple enough.

[1] ublksrv

https://github.com/ming1/ubdsrv

Signed-off-by: Ming Lei <ming.lei@redhat.com>
---
 drivers/block/Kconfig         |    6 +
 drivers/block/Makefile        |    2 +
 drivers/block/ublk_drv.c      | 1603 +++++++++++++++++++++++++++++++++
 include/uapi/linux/ublk_cmd.h |  158 ++++
 4 files changed, 1769 insertions(+)
 create mode 100644 drivers/block/ublk_drv.c
 create mode 100644 include/uapi/linux/ublk_cmd.h

Comments

Ziyang Zhang June 30, 2022, 11:35 a.m. UTC | #1
On 2022/6/29 00:08, Ming Lei wrote:

[...]

> +#define UBLK_MAX_PIN_PAGES	32
> +
> +static inline void ublk_release_pages(struct ublk_queue *ubq, struct page **pages,
> +		int nr_pages)
> +{
> +	int i;
> +
> +	for (i = 0; i < nr_pages; i++)
> +		put_page(pages[i]);
> +}
> +
> +static inline int ublk_pin_user_pages(struct ublk_queue *ubq, u64 start_vm,
> +		unsigned int nr_pages, unsigned int gup_flags,
> +		struct page **pages)
> +{
> +	return get_user_pages_fast(start_vm, nr_pages, gup_flags, pages);
> +}

> +
> +static inline unsigned ublk_copy_bv(struct bio_vec *bv, void **bv_addr,
> +		void *pg_addr, unsigned int *pg_off,
> +		unsigned int *pg_len, bool to_bv)
> +{
> +	unsigned len = min_t(unsigned, bv->bv_len, *pg_len);
> +
> +	if (*bv_addr == NULL)
> +		*bv_addr = kmap_local_page(bv->bv_page);
> +
> +	if (to_bv)
> +		memcpy(*bv_addr + bv->bv_offset, pg_addr + *pg_off, len);
> +	else
> +		memcpy(pg_addr + *pg_off, *bv_addr + bv->bv_offset, len);
> +
> +	bv->bv_offset += len;
> +	bv->bv_len -= len;
> +	*pg_off += len;
> +	*pg_len -= len;
> +
> +	if (!bv->bv_len) {
> +		kunmap_local(*bv_addr);
> +		*bv_addr = NULL;
> +	}
> +
> +	return len;
> +}
> +
> +/* copy rq pages to ublksrv vm address pointed by io->addr */
> +static int ublk_copy_pages(struct ublk_queue *ubq, struct request *rq, bool to_rq,
> +		unsigned int max_bytes)
> +{
> +	unsigned int gup_flags = to_rq ? 0 : FOLL_WRITE;
> +	struct ublk_io *io = &ubq->ios[rq->tag];
> +	struct page *pgs[UBLK_MAX_PIN_PAGES];
> +	struct req_iterator req_iter;
> +	struct bio_vec bv;
> +	const unsigned int rq_bytes = min(blk_rq_bytes(rq), max_bytes);
> +	unsigned long start = io->addr, left = rq_bytes;
> +	unsigned int idx = 0, pg_len = 0, pg_off = 0;
> +	int nr_pin = 0;
> +	void *pg_addr = NULL;
> +	struct page *curr = NULL;
> +
> +	rq_for_each_segment(bv, rq, req_iter) {
> +		unsigned len, bv_off = bv.bv_offset, bv_len = bv.bv_len;
> +		void *bv_addr = NULL;
> +
> +refill:
> +		if (pg_len == 0) {
> +			unsigned int off = 0;
> +
> +			if (pg_addr) {
> +				kunmap_local(pg_addr);
> +				if (!to_rq)
> +					set_page_dirty_lock(curr);
> +				pg_addr = NULL;
> +			}
> +
> +			/* refill pages */
> +			if (idx >= nr_pin) {
> +				unsigned int max_pages;
> +
> +				ublk_release_pages(ubq, pgs, nr_pin);
> +
> +				off = start & (PAGE_SIZE - 1);
> +				max_pages = min_t(unsigned, (off + left +
> +						PAGE_SIZE - 1) >> PAGE_SHIFT,
> +						UBLK_MAX_PIN_PAGES);
> +				nr_pin = ublk_pin_user_pages(ubq, start,
> +						max_pages, gup_flags, pgs);
> +				if (nr_pin < 0)
> +					goto exit;
> +				idx = 0;
> +			}
> +			pg_off = off;
> +			pg_len = min(PAGE_SIZE - off, left);
> +			off = 0;
> +			curr = pgs[idx++];
> +			pg_addr = kmap_local_page(curr);
> +		}
> +
> +		len = ublk_copy_bv(&bv, &bv_addr, pg_addr, &pg_off, &pg_len,
> +				to_rq);
> +		/* either one of the two has been consumed */
> +		WARN_ON_ONCE(bv.bv_len && pg_len);
> +		start += len;
> +		left -= len;
> +
> +		/* overflow */
> +		WARN_ON_ONCE(left > rq_bytes);
> +		WARN_ON_ONCE(bv.bv_len > bv_len);
> +		if (bv.bv_len)
> +			goto refill;
> +
> +		bv.bv_len = bv_len;
> +		bv.bv_offset = bv_off;
> +	}
> +	if (pg_addr) {
> +		kunmap_local(pg_addr);
> +		if (!to_rq)
> +			set_page_dirty_lock(curr);
> +	}
> +	ublk_release_pages(ubq, pgs, nr_pin);
> +
> +exit:
> +	return rq_bytes - left;
> +}
> +

Hi Ming, 

I note that you pin the user buffer's pages, memcpy() and release them immediately.

1) I think maybe copy_page_from_iter() is another choice for copying user buffer to biovecs
   since copy_page_from_iter() do not pin pages(But it may raise page fault).

2) Or will you design some mechanism such as LRU to manage these pinned pages? 
   For example pin those pages frequently required for a long time and release
   those pages not used for a long time.
   I remember you have talked about this LRU on pinned pages?

Which one do you think is better? copy_page_from_iter() or pin pages with LRU?
Maybe it depends on the user's workload?

Regards,
Zhang
Ming Lei June 30, 2022, 12:33 p.m. UTC | #2
On Thu, Jun 30, 2022 at 07:35:11PM +0800, Ziyang Zhang wrote:
> On 2022/6/29 00:08, Ming Lei wrote:
> 
> [...]
> 
> > +#define UBLK_MAX_PIN_PAGES	32
> > +
> > +static inline void ublk_release_pages(struct ublk_queue *ubq, struct page **pages,
> > +		int nr_pages)
> > +{
> > +	int i;
> > +
> > +	for (i = 0; i < nr_pages; i++)
> > +		put_page(pages[i]);
> > +}
> > +
> > +static inline int ublk_pin_user_pages(struct ublk_queue *ubq, u64 start_vm,
> > +		unsigned int nr_pages, unsigned int gup_flags,
> > +		struct page **pages)
> > +{
> > +	return get_user_pages_fast(start_vm, nr_pages, gup_flags, pages);
> > +}
> 
> > +
> > +static inline unsigned ublk_copy_bv(struct bio_vec *bv, void **bv_addr,
> > +		void *pg_addr, unsigned int *pg_off,
> > +		unsigned int *pg_len, bool to_bv)
> > +{
> > +	unsigned len = min_t(unsigned, bv->bv_len, *pg_len);
> > +
> > +	if (*bv_addr == NULL)
> > +		*bv_addr = kmap_local_page(bv->bv_page);
> > +
> > +	if (to_bv)
> > +		memcpy(*bv_addr + bv->bv_offset, pg_addr + *pg_off, len);
> > +	else
> > +		memcpy(pg_addr + *pg_off, *bv_addr + bv->bv_offset, len);
> > +
> > +	bv->bv_offset += len;
> > +	bv->bv_len -= len;
> > +	*pg_off += len;
> > +	*pg_len -= len;
> > +
> > +	if (!bv->bv_len) {
> > +		kunmap_local(*bv_addr);
> > +		*bv_addr = NULL;
> > +	}
> > +
> > +	return len;
> > +}
> > +
> > +/* copy rq pages to ublksrv vm address pointed by io->addr */
> > +static int ublk_copy_pages(struct ublk_queue *ubq, struct request *rq, bool to_rq,
> > +		unsigned int max_bytes)
> > +{
> > +	unsigned int gup_flags = to_rq ? 0 : FOLL_WRITE;
> > +	struct ublk_io *io = &ubq->ios[rq->tag];
> > +	struct page *pgs[UBLK_MAX_PIN_PAGES];
> > +	struct req_iterator req_iter;
> > +	struct bio_vec bv;
> > +	const unsigned int rq_bytes = min(blk_rq_bytes(rq), max_bytes);
> > +	unsigned long start = io->addr, left = rq_bytes;
> > +	unsigned int idx = 0, pg_len = 0, pg_off = 0;
> > +	int nr_pin = 0;
> > +	void *pg_addr = NULL;
> > +	struct page *curr = NULL;
> > +
> > +	rq_for_each_segment(bv, rq, req_iter) {
> > +		unsigned len, bv_off = bv.bv_offset, bv_len = bv.bv_len;
> > +		void *bv_addr = NULL;
> > +
> > +refill:
> > +		if (pg_len == 0) {
> > +			unsigned int off = 0;
> > +
> > +			if (pg_addr) {
> > +				kunmap_local(pg_addr);
> > +				if (!to_rq)
> > +					set_page_dirty_lock(curr);
> > +				pg_addr = NULL;
> > +			}
> > +
> > +			/* refill pages */
> > +			if (idx >= nr_pin) {
> > +				unsigned int max_pages;
> > +
> > +				ublk_release_pages(ubq, pgs, nr_pin);
> > +
> > +				off = start & (PAGE_SIZE - 1);
> > +				max_pages = min_t(unsigned, (off + left +
> > +						PAGE_SIZE - 1) >> PAGE_SHIFT,
> > +						UBLK_MAX_PIN_PAGES);
> > +				nr_pin = ublk_pin_user_pages(ubq, start,
> > +						max_pages, gup_flags, pgs);
> > +				if (nr_pin < 0)
> > +					goto exit;
> > +				idx = 0;
> > +			}
> > +			pg_off = off;
> > +			pg_len = min(PAGE_SIZE - off, left);
> > +			off = 0;
> > +			curr = pgs[idx++];
> > +			pg_addr = kmap_local_page(curr);
> > +		}
> > +
> > +		len = ublk_copy_bv(&bv, &bv_addr, pg_addr, &pg_off, &pg_len,
> > +				to_rq);
> > +		/* either one of the two has been consumed */
> > +		WARN_ON_ONCE(bv.bv_len && pg_len);
> > +		start += len;
> > +		left -= len;
> > +
> > +		/* overflow */
> > +		WARN_ON_ONCE(left > rq_bytes);
> > +		WARN_ON_ONCE(bv.bv_len > bv_len);
> > +		if (bv.bv_len)
> > +			goto refill;
> > +
> > +		bv.bv_len = bv_len;
> > +		bv.bv_offset = bv_off;
> > +	}
> > +	if (pg_addr) {
> > +		kunmap_local(pg_addr);
> > +		if (!to_rq)
> > +			set_page_dirty_lock(curr);
> > +	}
> > +	ublk_release_pages(ubq, pgs, nr_pin);
> > +
> > +exit:
> > +	return rq_bytes - left;
> > +}
> > +
> 
> Hi Ming, 
> 
> I note that you pin the user buffer's pages, memcpy() and release them immediately.
> 
> 1) I think maybe copy_page_from_iter() is another choice for copying user buffer to biovecs
>    since copy_page_from_iter() do not pin pages(But it may raise page fault).

copy_page_from_iter/copy_page_to_iter needs the userspage page,
then copy between the userspace page and bvec_iter pages, what it does
is just kmap/copy/kunmap.

Not see it is useful here.

> 
> 2) Or will you design some mechanism such as LRU to manage these pinned pages? 
>    For example pin those pages frequently required for a long time and release
>    those pages not used for a long time.
>    I remember you have talked about this LRU on pinned pages?

I'd explain it a bit.

When I worked on v1/v2, 'perf report' shows that get_user_pages_fast()
as one of top samples. Turns out it is a bug, which is fixed in

https://github.com/ming1/linux/commit/3c9fd476951759858cc548dee4cedc074194d0b0

After the issue is fixed, not see get_user_pages_fast() being hot spot
any more. I actually implemented one patch which pins all pages in
the ubd device whole lifetime, but not see obvious improvement, so I gave
up the idea.

In the test VM on my laptop, single job ubd/null randwrite can reach 700K iops.

> 
> Which one do you think is better? copy_page_from_iter() or pin pages with LRU?
> Maybe it depends on the user's workload?

So far in the enablement stage, I think the current approach is just fine,
but we still can improve it in future.


Thanks,
Ming
Ziyang Zhang July 1, 2022, 2:47 a.m. UTC | #3
On 2022/6/30 20:33, Ming Lei wrote:
> On Thu, Jun 30, 2022 at 07:35:11PM +0800, Ziyang Zhang wrote:
>> On 2022/6/29 00:08, Ming Lei wrote:
>>
>> [...]
>>
>>> +#define UBLK_MAX_PIN_PAGES	32
>>> +
>>> +static inline void ublk_release_pages(struct ublk_queue *ubq, struct page **pages,
>>> +		int nr_pages)
>>> +{
>>> +	int i;
>>> +
>>> +	for (i = 0; i < nr_pages; i++)
>>> +		put_page(pages[i]);
>>> +}
>>> +
>>> +static inline int ublk_pin_user_pages(struct ublk_queue *ubq, u64 start_vm,
>>> +		unsigned int nr_pages, unsigned int gup_flags,
>>> +		struct page **pages)
>>> +{
>>> +	return get_user_pages_fast(start_vm, nr_pages, gup_flags, pages);
>>> +}
>>
>>> +
>>> +static inline unsigned ublk_copy_bv(struct bio_vec *bv, void **bv_addr,
>>> +		void *pg_addr, unsigned int *pg_off,
>>> +		unsigned int *pg_len, bool to_bv)
>>> +{
>>> +	unsigned len = min_t(unsigned, bv->bv_len, *pg_len);
>>> +
>>> +	if (*bv_addr == NULL)
>>> +		*bv_addr = kmap_local_page(bv->bv_page);
>>> +
>>> +	if (to_bv)
>>> +		memcpy(*bv_addr + bv->bv_offset, pg_addr + *pg_off, len);
>>> +	else
>>> +		memcpy(pg_addr + *pg_off, *bv_addr + bv->bv_offset, len);
>>> +
>>> +	bv->bv_offset += len;
>>> +	bv->bv_len -= len;
>>> +	*pg_off += len;
>>> +	*pg_len -= len;
>>> +
>>> +	if (!bv->bv_len) {
>>> +		kunmap_local(*bv_addr);
>>> +		*bv_addr = NULL;
>>> +	}
>>> +
>>> +	return len;
>>> +}
>>> +
>>> +/* copy rq pages to ublksrv vm address pointed by io->addr */
>>> +static int ublk_copy_pages(struct ublk_queue *ubq, struct request *rq, bool to_rq,
>>> +		unsigned int max_bytes)
>>> +{
>>> +	unsigned int gup_flags = to_rq ? 0 : FOLL_WRITE;
>>> +	struct ublk_io *io = &ubq->ios[rq->tag];
>>> +	struct page *pgs[UBLK_MAX_PIN_PAGES];
>>> +	struct req_iterator req_iter;
>>> +	struct bio_vec bv;
>>> +	const unsigned int rq_bytes = min(blk_rq_bytes(rq), max_bytes);
>>> +	unsigned long start = io->addr, left = rq_bytes;
>>> +	unsigned int idx = 0, pg_len = 0, pg_off = 0;
>>> +	int nr_pin = 0;
>>> +	void *pg_addr = NULL;
>>> +	struct page *curr = NULL;
>>> +
>>> +	rq_for_each_segment(bv, rq, req_iter) {
>>> +		unsigned len, bv_off = bv.bv_offset, bv_len = bv.bv_len;
>>> +		void *bv_addr = NULL;
>>> +
>>> +refill:
>>> +		if (pg_len == 0) {
>>> +			unsigned int off = 0;
>>> +
>>> +			if (pg_addr) {
>>> +				kunmap_local(pg_addr);
>>> +				if (!to_rq)
>>> +					set_page_dirty_lock(curr);
>>> +				pg_addr = NULL;
>>> +			}
>>> +
>>> +			/* refill pages */
>>> +			if (idx >= nr_pin) {
>>> +				unsigned int max_pages;
>>> +
>>> +				ublk_release_pages(ubq, pgs, nr_pin);
>>> +
>>> +				off = start & (PAGE_SIZE - 1);
>>> +				max_pages = min_t(unsigned, (off + left +
>>> +						PAGE_SIZE - 1) >> PAGE_SHIFT,
>>> +						UBLK_MAX_PIN_PAGES);
>>> +				nr_pin = ublk_pin_user_pages(ubq, start,
>>> +						max_pages, gup_flags, pgs);
>>> +				if (nr_pin < 0)
>>> +					goto exit;
>>> +				idx = 0;
>>> +			}
>>> +			pg_off = off;
>>> +			pg_len = min(PAGE_SIZE - off, left);
>>> +			off = 0;
>>> +			curr = pgs[idx++];
>>> +			pg_addr = kmap_local_page(curr);
>>> +		}
>>> +
>>> +		len = ublk_copy_bv(&bv, &bv_addr, pg_addr, &pg_off, &pg_len,
>>> +				to_rq);
>>> +		/* either one of the two has been consumed */
>>> +		WARN_ON_ONCE(bv.bv_len && pg_len);
>>> +		start += len;
>>> +		left -= len;
>>> +
>>> +		/* overflow */
>>> +		WARN_ON_ONCE(left > rq_bytes);
>>> +		WARN_ON_ONCE(bv.bv_len > bv_len);
>>> +		if (bv.bv_len)
>>> +			goto refill;
>>> +
>>> +		bv.bv_len = bv_len;
>>> +		bv.bv_offset = bv_off;
>>> +	}
>>> +	if (pg_addr) {
>>> +		kunmap_local(pg_addr);
>>> +		if (!to_rq)
>>> +			set_page_dirty_lock(curr);
>>> +	}
>>> +	ublk_release_pages(ubq, pgs, nr_pin);
>>> +
>>> +exit:
>>> +	return rq_bytes - left;
>>> +}
>>> +
>>
>> Hi Ming, 
>>
>> I note that you pin the user buffer's pages, memcpy() and release them immediately.
>>
>> 1) I think maybe copy_page_from_iter() is another choice for copying user buffer to biovecs
>>    since copy_page_from_iter() do not pin pages(But it may raise page fault).
> 
> copy_page_from_iter/copy_page_to_iter needs the userspage page,
> then copy between the userspace page and bvec_iter pages, what it does
> is just kmap/copy/kunmap.
> 
> Not see it is useful here.


No, I don't agree.
copy_page_from_iter(): copy data from an iovec to kernel pages(such as bio's bv pages).
It finally calls raw_copy_from_user().

Here the src(iovec, here it is from user) is actually generated 
from a single void __user *ubuf, not a userspace page.

In copy_page_from_iter() I only find kmap/kunmap for the dest(kernel pages)
but it is unnecessary to kmap/kunmap the src iovec(from user) 
and please check the exception table usage in this routine.
I think raw_copy_from_user() inside copy_page_from_iter() should handle page faults.

You may find blk_rq_map_user() and bio_copy_from_iter() use copy_page_from_iter()
to copy from  void __user *ubuf to bio's bv pages. 

> 
>>
>> 2) Or will you design some mechanism such as LRU to manage these pinned pages? 
>>    For example pin those pages frequently required for a long time and release
>>    those pages not used for a long time.
>>    I remember you have talked about this LRU on pinned pages?
> 
> I'd explain it a bit.
> 
> When I worked on v1/v2, 'perf report' shows that get_user_pages_fast()
> as one of top samples. Turns out it is a bug, which is fixed in
> 
> https://github.com/ming1/linux/commit/3c9fd476951759858cc548dee4cedc074194d0b0
> 
> After the issue is fixed, not see get_user_pages_fast() being hot spot
> any more. I actually implemented one patch which pins all pages in
> the ubd device whole lifetime, but not see obvious improvement, so I gave
> up the idea.
> 
> In the test VM on my laptop, single job ubd/null randwrite can reach 700K iops.
> 
>>
>> Which one do you think is better? copy_page_from_iter() or pin pages with LRU?
>> Maybe it depends on the user's workload?
> 
> So far in the enablement stage, I think the current approach is just fine,
> but we still can improve it in future.
> 
> 
> Thanks,
> Ming
Ming Lei July 1, 2022, 4:06 a.m. UTC | #4
On Fri, Jul 01, 2022 at 10:47:30AM +0800, Ziyang Zhang wrote:
> On 2022/6/30 20:33, Ming Lei wrote:
> > On Thu, Jun 30, 2022 at 07:35:11PM +0800, Ziyang Zhang wrote:
> >> On 2022/6/29 00:08, Ming Lei wrote:
> >>
> >> [...]
> >>
> >>> +#define UBLK_MAX_PIN_PAGES	32
> >>> +
> >>> +static inline void ublk_release_pages(struct ublk_queue *ubq, struct page **pages,
> >>> +		int nr_pages)
> >>> +{
> >>> +	int i;
> >>> +
> >>> +	for (i = 0; i < nr_pages; i++)
> >>> +		put_page(pages[i]);
> >>> +}
> >>> +
> >>> +static inline int ublk_pin_user_pages(struct ublk_queue *ubq, u64 start_vm,
> >>> +		unsigned int nr_pages, unsigned int gup_flags,
> >>> +		struct page **pages)
> >>> +{
> >>> +	return get_user_pages_fast(start_vm, nr_pages, gup_flags, pages);
> >>> +}
> >>
> >>> +
> >>> +static inline unsigned ublk_copy_bv(struct bio_vec *bv, void **bv_addr,
> >>> +		void *pg_addr, unsigned int *pg_off,
> >>> +		unsigned int *pg_len, bool to_bv)
> >>> +{
> >>> +	unsigned len = min_t(unsigned, bv->bv_len, *pg_len);
> >>> +
> >>> +	if (*bv_addr == NULL)
> >>> +		*bv_addr = kmap_local_page(bv->bv_page);
> >>> +
> >>> +	if (to_bv)
> >>> +		memcpy(*bv_addr + bv->bv_offset, pg_addr + *pg_off, len);
> >>> +	else
> >>> +		memcpy(pg_addr + *pg_off, *bv_addr + bv->bv_offset, len);
> >>> +
> >>> +	bv->bv_offset += len;
> >>> +	bv->bv_len -= len;
> >>> +	*pg_off += len;
> >>> +	*pg_len -= len;
> >>> +
> >>> +	if (!bv->bv_len) {
> >>> +		kunmap_local(*bv_addr);
> >>> +		*bv_addr = NULL;
> >>> +	}
> >>> +
> >>> +	return len;
> >>> +}
> >>> +
> >>> +/* copy rq pages to ublksrv vm address pointed by io->addr */
> >>> +static int ublk_copy_pages(struct ublk_queue *ubq, struct request *rq, bool to_rq,
> >>> +		unsigned int max_bytes)
> >>> +{
> >>> +	unsigned int gup_flags = to_rq ? 0 : FOLL_WRITE;
> >>> +	struct ublk_io *io = &ubq->ios[rq->tag];
> >>> +	struct page *pgs[UBLK_MAX_PIN_PAGES];
> >>> +	struct req_iterator req_iter;
> >>> +	struct bio_vec bv;
> >>> +	const unsigned int rq_bytes = min(blk_rq_bytes(rq), max_bytes);
> >>> +	unsigned long start = io->addr, left = rq_bytes;
> >>> +	unsigned int idx = 0, pg_len = 0, pg_off = 0;
> >>> +	int nr_pin = 0;
> >>> +	void *pg_addr = NULL;
> >>> +	struct page *curr = NULL;
> >>> +
> >>> +	rq_for_each_segment(bv, rq, req_iter) {
> >>> +		unsigned len, bv_off = bv.bv_offset, bv_len = bv.bv_len;
> >>> +		void *bv_addr = NULL;
> >>> +
> >>> +refill:
> >>> +		if (pg_len == 0) {
> >>> +			unsigned int off = 0;
> >>> +
> >>> +			if (pg_addr) {
> >>> +				kunmap_local(pg_addr);
> >>> +				if (!to_rq)
> >>> +					set_page_dirty_lock(curr);
> >>> +				pg_addr = NULL;
> >>> +			}
> >>> +
> >>> +			/* refill pages */
> >>> +			if (idx >= nr_pin) {
> >>> +				unsigned int max_pages;
> >>> +
> >>> +				ublk_release_pages(ubq, pgs, nr_pin);
> >>> +
> >>> +				off = start & (PAGE_SIZE - 1);
> >>> +				max_pages = min_t(unsigned, (off + left +
> >>> +						PAGE_SIZE - 1) >> PAGE_SHIFT,
> >>> +						UBLK_MAX_PIN_PAGES);
> >>> +				nr_pin = ublk_pin_user_pages(ubq, start,
> >>> +						max_pages, gup_flags, pgs);
> >>> +				if (nr_pin < 0)
> >>> +					goto exit;
> >>> +				idx = 0;
> >>> +			}
> >>> +			pg_off = off;
> >>> +			pg_len = min(PAGE_SIZE - off, left);
> >>> +			off = 0;
> >>> +			curr = pgs[idx++];
> >>> +			pg_addr = kmap_local_page(curr);
> >>> +		}
> >>> +
> >>> +		len = ublk_copy_bv(&bv, &bv_addr, pg_addr, &pg_off, &pg_len,
> >>> +				to_rq);
> >>> +		/* either one of the two has been consumed */
> >>> +		WARN_ON_ONCE(bv.bv_len && pg_len);
> >>> +		start += len;
> >>> +		left -= len;
> >>> +
> >>> +		/* overflow */
> >>> +		WARN_ON_ONCE(left > rq_bytes);
> >>> +		WARN_ON_ONCE(bv.bv_len > bv_len);
> >>> +		if (bv.bv_len)
> >>> +			goto refill;
> >>> +
> >>> +		bv.bv_len = bv_len;
> >>> +		bv.bv_offset = bv_off;
> >>> +	}
> >>> +	if (pg_addr) {
> >>> +		kunmap_local(pg_addr);
> >>> +		if (!to_rq)
> >>> +			set_page_dirty_lock(curr);
> >>> +	}
> >>> +	ublk_release_pages(ubq, pgs, nr_pin);
> >>> +
> >>> +exit:
> >>> +	return rq_bytes - left;
> >>> +}
> >>> +
> >>
> >> Hi Ming, 
> >>
> >> I note that you pin the user buffer's pages, memcpy() and release them immediately.
> >>
> >> 1) I think maybe copy_page_from_iter() is another choice for copying user buffer to biovecs
> >>    since copy_page_from_iter() do not pin pages(But it may raise page fault).
> > 
> > copy_page_from_iter/copy_page_to_iter needs the userspage page,
> > then copy between the userspace page and bvec_iter pages, what it does
> > is just kmap/copy/kunmap.
> > 
> > Not see it is useful here.
> 
> 
> No, I don't agree.
> copy_page_from_iter(): copy data from an iovec to kernel pages(such as bio's bv pages).
> It finally calls raw_copy_from_user().
> 
> Here the src(iovec, here it is from user) is actually generated 
> from a single void __user *ubuf, not a userspace page.
> 
> In copy_page_from_iter() I only find kmap/kunmap for the dest(kernel pages)
> but it is unnecessary to kmap/kunmap the src iovec(from user) 
> and please check the exception table usage in this routine.
> I think raw_copy_from_user() inside copy_page_from_iter() should handle page faults.
> 
> You may find blk_rq_map_user() and bio_copy_from_iter() use copy_page_from_iter()
> to copy from  void __user *ubuf to bio's bv pages. 

OK, maybe I misunderstood your point, but I don't think it is good idea:

1) get_user_page_fast() has been proved to be efficient in fast io path,
and relying kernel to handle user page fault should be slower

2) in future, maybe v4, we can extend the pinned page lifetime to
cover the io's lifetime, in this way we can call madvise(MADV_DONTNEED)
in advance for user io buffer before starting ubd device, then once
io is completed, pages pinned for this io can be reclaimed by mm without
needing to swap out, this way will improve memory utilization much.
 

Thanks,
Ming
Sagi Grimberg July 4, 2022, 11:17 a.m. UTC | #5
> This is the driver part of userspace block driver(ublk driver), the other
> part is userspace daemon part(ublksrv)[1].
> 
> The two parts communicate by io_uring's IORING_OP_URING_CMD with one
> shared cmd buffer for storing io command, and the buffer is read only for
> ublksrv, each io command is indexed by io request tag directly, and
> is written by ublk driver.
> 
> For example, when one READ io request is submitted to ublk block driver, ublk
> driver stores the io command into cmd buffer first, then completes one
> IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to
> ublk driver beforehand by ublksrv for getting notification of any new io request,
> and each URING_CMD is associated with one io request by tag.
> 
> After ublksrv gets the io command, it translates and handles the ublk io
> request, such as, for the ublk-loop target, ublksrv translates the request
> into same request on another file or disk, like the kernel loop block
> driver. In ublksrv's implementation, the io is still handled by io_uring,
> and share same ring with IORING_OP_URING_CMD command. When the target io
> request is done, the same IORING_OP_URING_CMD is issued to ublk driver for
> both committing io request result and getting future notification of new
> io request.
> 
> Another thing done by ublk driver is to copy data between kernel io
> request and ublksrv's io buffer:
> 
> 1) before ubsrv handles WRITE request, copy the request's data into
> ublksrv's userspace io buffer, so that ublksrv can handle the write
> request
> 
> 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer
> into this READ request, then ublk driver can complete the READ request
> 
> Zero copy may be switched if mm is ready to support it.
> 
> ublk driver doesn't handle any logic of the specific user space driver,
> so it should be small/simple enough.
> 
> [1] ublksrv
> 
> https://github.com/ming1/ubdsrv
> 
> Signed-off-by: Ming Lei <ming.lei@redhat.com>
> ---
>   drivers/block/Kconfig         |    6 +
>   drivers/block/Makefile        |    2 +
>   drivers/block/ublk_drv.c      | 1603 +++++++++++++++++++++++++++++++++
>   include/uapi/linux/ublk_cmd.h |  158 ++++
>   4 files changed, 1769 insertions(+)
>   create mode 100644 drivers/block/ublk_drv.c
>   create mode 100644 include/uapi/linux/ublk_cmd.h
> 
> diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig
> index fdb81f2794cd..d218089cdbec 100644
> --- a/drivers/block/Kconfig
> +++ b/drivers/block/Kconfig
> @@ -408,6 +408,12 @@ config BLK_DEV_RBD
>   
>   	  If unsure, say N.
>   
> +config BLK_DEV_UBLK
> +	bool "Userspace block driver"

Really? why compile this to the kernel and not tristate as loadable
module?
Ming Lei July 4, 2022, 12:34 p.m. UTC | #6
On Mon, Jul 04, 2022 at 02:17:44PM +0300, Sagi Grimberg wrote:
> 
> > This is the driver part of userspace block driver(ublk driver), the other
> > part is userspace daemon part(ublksrv)[1].
> > 
> > The two parts communicate by io_uring's IORING_OP_URING_CMD with one
> > shared cmd buffer for storing io command, and the buffer is read only for
> > ublksrv, each io command is indexed by io request tag directly, and
> > is written by ublk driver.
> > 
> > For example, when one READ io request is submitted to ublk block driver, ublk
> > driver stores the io command into cmd buffer first, then completes one
> > IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to
> > ublk driver beforehand by ublksrv for getting notification of any new io request,
> > and each URING_CMD is associated with one io request by tag.
> > 
> > After ublksrv gets the io command, it translates and handles the ublk io
> > request, such as, for the ublk-loop target, ublksrv translates the request
> > into same request on another file or disk, like the kernel loop block
> > driver. In ublksrv's implementation, the io is still handled by io_uring,
> > and share same ring with IORING_OP_URING_CMD command. When the target io
> > request is done, the same IORING_OP_URING_CMD is issued to ublk driver for
> > both committing io request result and getting future notification of new
> > io request.
> > 
> > Another thing done by ublk driver is to copy data between kernel io
> > request and ublksrv's io buffer:
> > 
> > 1) before ubsrv handles WRITE request, copy the request's data into
> > ublksrv's userspace io buffer, so that ublksrv can handle the write
> > request
> > 
> > 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer
> > into this READ request, then ublk driver can complete the READ request
> > 
> > Zero copy may be switched if mm is ready to support it.
> > 
> > ublk driver doesn't handle any logic of the specific user space driver,
> > so it should be small/simple enough.
> > 
> > [1] ublksrv
> > 
> > https://github.com/ming1/ubdsrv
> > 
> > Signed-off-by: Ming Lei <ming.lei@redhat.com>
> > ---
> >   drivers/block/Kconfig         |    6 +
> >   drivers/block/Makefile        |    2 +
> >   drivers/block/ublk_drv.c      | 1603 +++++++++++++++++++++++++++++++++
> >   include/uapi/linux/ublk_cmd.h |  158 ++++
> >   4 files changed, 1769 insertions(+)
> >   create mode 100644 drivers/block/ublk_drv.c
> >   create mode 100644 include/uapi/linux/ublk_cmd.h
> > 
> > diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig
> > index fdb81f2794cd..d218089cdbec 100644
> > --- a/drivers/block/Kconfig
> > +++ b/drivers/block/Kconfig
> > @@ -408,6 +408,12 @@ config BLK_DEV_RBD
> >   	  If unsure, say N.
> > +config BLK_DEV_UBLK
> > +	bool "Userspace block driver"
> 
> Really? why compile this to the kernel and not tristate as loadable
> module?

So far, this is only one reason: task_work_add() is required, which
isn't exported for modules.


Thanks,
Ming
Sagi Grimberg July 4, 2022, 2 p.m. UTC | #7
>>> diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig
>>> index fdb81f2794cd..d218089cdbec 100644
>>> --- a/drivers/block/Kconfig
>>> +++ b/drivers/block/Kconfig
>>> @@ -408,6 +408,12 @@ config BLK_DEV_RBD
>>>    	  If unsure, say N.
>>> +config BLK_DEV_UBLK
>>> +	bool "Userspace block driver"
>>
>> Really? why compile this to the kernel and not tristate as loadable
>> module?
> 
> So far, this is only one reason: task_work_add() is required, which
> isn't exported for modules.

So why not exporting it?
Doesn't seem like a good justification to build it into the kernel.
Gabriel Krisman Bertazi July 4, 2022, 4:13 p.m. UTC | #8
Sagi Grimberg <sagi@grimberg.me> writes:

>>>> diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig
>>>> index fdb81f2794cd..d218089cdbec 100644
>>>> --- a/drivers/block/Kconfig
>>>> +++ b/drivers/block/Kconfig
>>>> @@ -408,6 +408,12 @@ config BLK_DEV_RBD
>>>>    	  If unsure, say N.
>>>> +config BLK_DEV_UBLK
>>>> +	bool "Userspace block driver"
>>>
>>> Really? why compile this to the kernel and not tristate as loadable
>>> module?
>> So far, this is only one reason: task_work_add() is required, which
>> isn't exported for modules.
>
> So why not exporting it?
> Doesn't seem like a good justification to build it into the kernel.

Sagi,

If I understand correctly, the task_work_add function is quite a core
API that we probably want to avoid exposing directly to (out-of-tree)
modules?  I agree, though, it would be great to have this buildable as a
module for general use cases.  Would it make sense to have it exposed
through a thin built-in wrapper, specific to UBD, which is exported, and
therefore able to invoke that function?  Is it a reasonable approach?
Sagi Grimberg July 4, 2022, 4:19 p.m. UTC | #9
>>>>> diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig
>>>>> index fdb81f2794cd..d218089cdbec 100644
>>>>> --- a/drivers/block/Kconfig
>>>>> +++ b/drivers/block/Kconfig
>>>>> @@ -408,6 +408,12 @@ config BLK_DEV_RBD
>>>>>     	  If unsure, say N.
>>>>> +config BLK_DEV_UBLK
>>>>> +	bool "Userspace block driver"
>>>>
>>>> Really? why compile this to the kernel and not tristate as loadable
>>>> module?
>>> So far, this is only one reason: task_work_add() is required, which
>>> isn't exported for modules.
>>
>> So why not exporting it?
>> Doesn't seem like a good justification to build it into the kernel.
> 
> Sagi,
> 
> If I understand correctly, the task_work_add function is quite a core
> API that we probably want to avoid exposing directly to (out-of-tree)
> modules?  I agree, though, it would be great to have this buildable as a
> module for general use cases.  Would it make sense to have it exposed
> through a thin built-in wrapper, specific to UBD, which is exported, and
> therefore able to invoke that function?  Is it a reasonable approach?

All I'm saying is that either we should expose it (or an interface to
it) if it has merit, or use something else (use a workqueue).
Having a block driver driver builtin is probably not the answer.
Gabriel Krisman Bertazi July 4, 2022, 10:10 p.m. UTC | #10
Ming Lei <ming.lei@redhat.com> writes:

> This is the driver part of userspace block driver(ublk driver), the other
> part is userspace daemon part(ublksrv)[1].
>
> The two parts communicate by io_uring's IORING_OP_URING_CMD with one
> shared cmd buffer for storing io command, and the buffer is read only for
> ublksrv, each io command is indexed by io request tag directly, and
> is written by ublk driver.
>
> For example, when one READ io request is submitted to ublk block driver, ublk
> driver stores the io command into cmd buffer first, then completes one
> IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to
> ublk driver beforehand by ublksrv for getting notification of any new io request,
> and each URING_CMD is associated with one io request by tag.
>
> After ublksrv gets the io command, it translates and handles the ublk io
> request, such as, for the ublk-loop target, ublksrv translates the request
> into same request on another file or disk, like the kernel loop block
> driver. In ublksrv's implementation, the io is still handled by io_uring,
> and share same ring with IORING_OP_URING_CMD command. When the target io
> request is done, the same IORING_OP_URING_CMD is issued to ublk driver for
> both committing io request result and getting future notification of new
> io request.
>
> Another thing done by ublk driver is to copy data between kernel io
> request and ublksrv's io buffer:
>
> 1) before ubsrv handles WRITE request, copy the request's data into
> ublksrv's userspace io buffer, so that ublksrv can handle the write
> request
>
> 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer
> into this READ request, then ublk driver can complete the READ request
>
> Zero copy may be switched if mm is ready to support it.
>
> ublk driver doesn't handle any logic of the specific user space driver,
> so it should be small/simple enough.
>
> [1] ublksrv
>
> https://github.com/ming1/ubdsrv
>
> Signed-off-by: Ming Lei <ming.lei@redhat.com>

Hi Ming,

A few comments inline:


> +#define UBLK_MINORS		(1U << MINORBITS)
> +
> +struct ublk_rq_data {
> +	struct callback_head work;
> +};
> +
> +/* io cmd is active: sqe cmd is received, and its cqe isn't done */
> +#define UBLK_IO_FLAG_ACTIVE	0x01
> +
> +/*
> + * FETCH io cmd is completed via cqe, and the io cmd is being handled by
> + * ublksrv, and not committed yet
> + */
> +#define UBLK_IO_FLAG_OWNED_BY_SRV 0x02
> +

Minor nit: I wonder if the IO life cycle isn't better represented as a
state machine than flags:

enum {
   UBLK_IO_FREE,
   UBLK_IO_QUEUED
   UBLK_IO_OWNED_BY_SRV
   UBLK_IO_COMPLETED,
   UBLK_IO_ABORTED,
}

Since currently, IO_FLAG_ACTIVE and IO_OWNED_BY_SRV should (almost) be
mutually exclusive.


> +
> +static int ublk_ctrl_stop_dev(struct ublk_device *ub)
> +{
> +	ublk_stop_dev(ub);
> +	cancel_work_sync(&ub->stop_work);
> +	return 0;
> +}
> +
> +static inline bool ublk_queue_ready(struct ublk_queue *ubq)
> +{
> +	return ubq->nr_io_ready == ubq->q_depth;
> +}
> +
> +/* device can only be started after all IOs are ready */
> +static void ublk_mark_io_ready(struct ublk_device *ub, struct ublk_queue *ubq)
> +{
> +	mutex_lock(&ub->mutex);
> +	ubq->nr_io_ready++;

I think this is still problematic for the case where a FETCH_IO is sent
from a different thread than the one originally set in ubq_daemon
(i.e. a userspace bug).  Since ubq_daemon is used to decide what task
context will do the data copy, If an IO_FETCH_RQ is sent to the same queue
from two threads, the data copy can happen in the context of the wrong
task.  I'd suggest something like the check below at the beginning of
mark_io_ready and a similar on for IO_COMMIT_AND_FETCH_RQ

	mutex_lock(&ub->mutex);
        if (ub->ubq_daemon && ub->ubq_daemon != current) {
           mutex_unlock(&ub->mutex);
           return -EINVAL;
        }
	ubq->nr_io_ready++;
        ...
> +	if (ublk_queue_ready(ubq)) {
> +		ubq->ubq_daemon = current;
> +		get_task_struct(ubq->ubq_daemon);
> +		ub->nr_queues_ready++;
> +	}
> +	if (ub->nr_queues_ready == ub->dev_info.nr_hw_queues)
> +		complete_all(&ub->completion);
> +	mutex_unlock(&ub->mutex);
> +}
> +
> +static int ublk_ch_uring_cmd(struct io_uring_cmd *cmd, unsigned int issue_flags)
> +{
> +	struct ublksrv_io_cmd *ub_cmd = (struct ublksrv_io_cmd *)cmd->cmd;
> +	struct ublk_device *ub = cmd->file->private_data;
> +	struct ublk_queue *ubq;
> +	struct ublk_io *io;
> +	u32 cmd_op = cmd->cmd_op;
> +	unsigned tag = ub_cmd->tag;
> +	int ret = -EINVAL;
> +
> +	pr_devel("%s: receieved: cmd op %d queue %d tag %d result %d\n",

                         ^^^
                         received


> +			__func__, cmd->cmd_op, ub_cmd->q_id, tag,
> +			ub_cmd->result);
> +
> +	if (!(issue_flags & IO_URING_F_SQE128))
> +		goto out;
> +
> +	ubq = ublk_get_queue(ub, ub_cmd->q_id);
> +	if (!ubq || ub_cmd->q_id != ubq->q_id)

q_id is coming from userspace and is used to access an array inside
ublk_get_queue().  I think you need to ensure qid < ub->dev_info.nr_hw_queues
before calling ublk_get_queue() to protect from a kernel bad memory
access triggered by userspace.

> +		goto out;
> +
> +	if (WARN_ON_ONCE(tag >= ubq->q_depth))

Userspace shouldn't be able to easily trigger a WARN_ON.

> +		goto out;
> +
> +	io = &ubq->ios[tag];
> +
> +	/* there is pending io cmd, something must be wrong */
> +	if (io->flags & UBLK_IO_FLAG_ACTIVE) {b
> +		ret = -EBUSY;
> +		goto out;
> +	}
> +
> +	switch (cmd_op) {
> +	case UBLK_IO_FETCH_REQ:
> +		/* UBLK_IO_FETCH_REQ is only allowed before queue is setup */
> +		if (WARN_ON_ONCE(ublk_queue_ready(ubq))) {

Likewise, this shouldn't trigger a WARN_ON, IMO.

> +			ret = -EBUSY;
> +			goto out;
> +		}
> +		/*
> +		 * The io is being handled by server, so COMMIT_RQ is expected
> +		 * instead of FETCH_REQ
> +		 */
> +		if (io->flags & UBLK_IO_FLAG_OWNED_BY_SRV)
> +			goto out;
> +		/* FETCH_RQ has to provide IO buffer */
> +		if (!ub_cmd->addr)
> +			goto out;
> +		io->cmd = cmd;
> +		io->flags |= UBLK_IO_FLAG_ACTIVE;
> +		io->addr = ub_cmd->addr;
> +
> +		ublk_mark_io_ready(ub, ubq);
> +		break;
> +	case UBLK_IO_COMMIT_AND_FETCH_REQ:
> +		/* FETCH_RQ has to provide IO buffer */
> +		if (!ub_cmd->addr)
> +			goto out;
> +		io->addr = ub_cmd->addr;
> +		io->flags |= UBLK_IO_FLAG_ACTIVE;
> +		fallthrough;
> +	case UBLK_IO_COMMIT_REQ:
> +		io->cmd = cmd;
> +		if (!(io->flags & UBLK_IO_FLAG_OWNED_BY_SRV))
> +			goto out;
> +		ublk_commit_completion(ub, ub_cmd);
> +
> +		/* COMMIT_REQ is supposed to not fetch req */

I wonder if we could make it without IO_COMMIT_REQ.  Is it useful to be
able to commit without fetching a new request?

> +		if (cmd_op == UBLK_IO_COMMIT_REQ) {
> +			ret = UBLK_IO_RES_OK;
> +			goto out;
> +		}
> +		break;
> +	default:
> +		goto out;
> +	}
> +	return -EIOCBQUEUED;
> +
> + out:
> +	io->flags &= ~UBLK_IO_FLAG_ACTIVE;
> +	io_uring_cmd_done(cmd, ret, 0);
> +	pr_devel("%s: complete: cmd op %d, tag %d ret %x io_flags %x\n",
> +			__func__, cmd_op, tag, ret, io->flags);
> +	return -EIOCBQUEUED;
> +}
> +

Thanks!
Ming Lei July 5, 2022, 12:43 a.m. UTC | #11
On Mon, Jul 04, 2022 at 07:19:09PM +0300, Sagi Grimberg wrote:
> 
> > > > > > diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig
> > > > > > index fdb81f2794cd..d218089cdbec 100644
> > > > > > --- a/drivers/block/Kconfig
> > > > > > +++ b/drivers/block/Kconfig
> > > > > > @@ -408,6 +408,12 @@ config BLK_DEV_RBD
> > > > > >     	  If unsure, say N.
> > > > > > +config BLK_DEV_UBLK
> > > > > > +	bool "Userspace block driver"
> > > > > 
> > > > > Really? why compile this to the kernel and not tristate as loadable
> > > > > module?
> > > > So far, this is only one reason: task_work_add() is required, which
> > > > isn't exported for modules.
> > > 
> > > So why not exporting it?
> > > Doesn't seem like a good justification to build it into the kernel.
> > 
> > Sagi,
> > 
> > If I understand correctly, the task_work_add function is quite a core
> > API that we probably want to avoid exposing directly to (out-of-tree)
> > modules?  I agree, though, it would be great to have this buildable as a
> > module for general use cases.  Would it make sense to have it exposed
> > through a thin built-in wrapper, specific to UBD, which is exported, and
> > therefore able to invoke that function?  Is it a reasonable approach?
> 
> All I'm saying is that either we should expose it (or an interface to
> it) if it has merit, or use something else (use a workqueue).

There isn't replacement for task_work_add().

If module has to be supported, we can add one command for running the
work function in the ubq context, that will add some cost.

> Having a block driver driver builtin is probably not the answer.

Not sure, there are at least two drivers which use the API.


Thanks,
Ming
Ziyang Zhang July 5, 2022, 4:16 a.m. UTC | #12
On 2022/7/5 06:10, Gabriel Krisman Bertazi wrote:
> Ming Lei <ming.lei@redhat.com> writes:
> 
>> This is the driver part of userspace block driver(ublk driver), the other
>> part is userspace daemon part(ublksrv)[1].
>>
>> The two parts communicate by io_uring's IORING_OP_URING_CMD with one
>> shared cmd buffer for storing io command, and the buffer is read only for
>> ublksrv, each io command is indexed by io request tag directly, and
>> is written by ublk driver.
>>
>> For example, when one READ io request is submitted to ublk block driver, ublk
>> driver stores the io command into cmd buffer first, then completes one
>> IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to
>> ublk driver beforehand by ublksrv for getting notification of any new io request,
>> and each URING_CMD is associated with one io request by tag.
>>
>> After ublksrv gets the io command, it translates and handles the ublk io
>> request, such as, for the ublk-loop target, ublksrv translates the request
>> into same request on another file or disk, like the kernel loop block
>> driver. In ublksrv's implementation, the io is still handled by io_uring,
>> and share same ring with IORING_OP_URING_CMD command. When the target io
>> request is done, the same IORING_OP_URING_CMD is issued to ublk driver for
>> both committing io request result and getting future notification of new
>> io request.
>>
>> Another thing done by ublk driver is to copy data between kernel io
>> request and ublksrv's io buffer:
>>
>> 1) before ubsrv handles WRITE request, copy the request's data into
>> ublksrv's userspace io buffer, so that ublksrv can handle the write
>> request
>>
>> 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer
>> into this READ request, then ublk driver can complete the READ request
>>
>> Zero copy may be switched if mm is ready to support it.
>>
>> ublk driver doesn't handle any logic of the specific user space driver,
>> so it should be small/simple enough.
>>
>> [1] ublksrv
>>
>> https://github.com/ming1/ubdsrv
>>
>> Signed-off-by: Ming Lei <ming.lei@redhat.com>
> 
> Hi Ming,
> 
> A few comments inline:
> 
> 
>> +#define UBLK_MINORS		(1U << MINORBITS)
>> +
>> +struct ublk_rq_data {
>> +	struct callback_head work;
>> +};
>> +
>> +/* io cmd is active: sqe cmd is received, and its cqe isn't done */
>> +#define UBLK_IO_FLAG_ACTIVE	0x01
>> +
>> +/*
>> + * FETCH io cmd is completed via cqe, and the io cmd is being handled by
>> + * ublksrv, and not committed yet
>> + */
>> +#define UBLK_IO_FLAG_OWNED_BY_SRV 0x02
>> +
> 
> Minor nit: I wonder if the IO life cycle isn't better represented as a
> state machine than flags:
> 
> enum {
>    UBLK_IO_FREE,
>    UBLK_IO_QUEUED
>    UBLK_IO_OWNED_BY_SRV
>    UBLK_IO_COMPLETED,
>    UBLK_IO_ABORTED,
> }
> 
> Since currently, IO_FLAG_ACTIVE and IO_OWNED_BY_SRV should (almost) be
> mutually exclusive.
> 
> 
>> +
>> +static int ublk_ctrl_stop_dev(struct ublk_device *ub)
>> +{
>> +	ublk_stop_dev(ub);
>> +	cancel_work_sync(&ub->stop_work);
>> +	return 0;
>> +}
>> +
>> +static inline bool ublk_queue_ready(struct ublk_queue *ubq)
>> +{
>> +	return ubq->nr_io_ready == ubq->q_depth;
>> +}
>> +
>> +/* device can only be started after all IOs are ready */
>> +static void ublk_mark_io_ready(struct ublk_device *ub, struct ublk_queue *ubq)
>> +{
>> +	mutex_lock(&ub->mutex);
>> +	ubq->nr_io_ready++;
> 
> I think this is still problematic for the case where a FETCH_IO is sent
> from a different thread than the one originally set in ubq_daemon
> (i.e. a userspace bug).  Since ubq_daemon is used to decide what task
> context will do the data copy, If an IO_FETCH_RQ is sent to the same queue
> from two threads, the data copy can happen in the context of the wrong
> task.  I'd suggest something like the check below at the beginning of
> mark_io_ready and a similar on for IO_COMMIT_AND_FETCH_RQ
> 
> 	mutex_lock(&ub->mutex);
>         if (ub->ubq_daemon && ub->ubq_daemon != current) {
>            mutex_unlock(&ub->mutex);
>            return -EINVAL;
>         }
> 	ubq->nr_io_ready++;
>         ...
>> +	if (ublk_queue_ready(ubq)) {
>> +		ubq->ubq_daemon = current;
>> +		get_task_struct(ubq->ubq_daemon);
>> +		ub->nr_queues_ready++;
>> +	}
>> +	if (ub->nr_queues_ready == ub->dev_info.nr_hw_queues)
>> +		complete_all(&ub->completion);
>> +	mutex_unlock(&ub->mutex);
>> +}
>> +
>> +static int ublk_ch_uring_cmd(struct io_uring_cmd *cmd, unsigned int issue_flags)
>> +{
>> +	struct ublksrv_io_cmd *ub_cmd = (struct ublksrv_io_cmd *)cmd->cmd;
>> +	struct ublk_device *ub = cmd->file->private_data;
>> +	struct ublk_queue *ubq;
>> +	struct ublk_io *io;
>> +	u32 cmd_op = cmd->cmd_op;
>> +	unsigned tag = ub_cmd->tag;
>> +	int ret = -EINVAL;
>> +
>> +	pr_devel("%s: receieved: cmd op %d queue %d tag %d result %d\n",
> 
>                          ^^^
>                          received
> 
> 
>> +			__func__, cmd->cmd_op, ub_cmd->q_id, tag,
>> +			ub_cmd->result);
>> +
>> +	if (!(issue_flags & IO_URING_F_SQE128))
>> +		goto out;
>> +
>> +	ubq = ublk_get_queue(ub, ub_cmd->q_id);
>> +	if (!ubq || ub_cmd->q_id != ubq->q_id)
> 
> q_id is coming from userspace and is used to access an array inside
> ublk_get_queue().  I think you need to ensure qid < ub->dev_info.nr_hw_queues
> before calling ublk_get_queue() to protect from a kernel bad memory
> access triggered by userspace.
> 
>> +		goto out;
>> +
>> +	if (WARN_ON_ONCE(tag >= ubq->q_depth))
> 
> Userspace shouldn't be able to easily trigger a WARN_ON.
> 
>> +		goto out;
>> +
>> +	io = &ubq->ios[tag];
>> +
>> +	/* there is pending io cmd, something must be wrong */
>> +	if (io->flags & UBLK_IO_FLAG_ACTIVE) {b
>> +		ret = -EBUSY;
>> +		goto out;
>> +	}
>> +
>> +	switch (cmd_op) {
>> +	case UBLK_IO_FETCH_REQ:
>> +		/* UBLK_IO_FETCH_REQ is only allowed before queue is setup */
>> +		if (WARN_ON_ONCE(ublk_queue_ready(ubq))) {
> 
> Likewise, this shouldn't trigger a WARN_ON, IMO.
> 
>> +			ret = -EBUSY;
>> +			goto out;
>> +		}
>> +		/*
>> +		 * The io is being handled by server, so COMMIT_RQ is expected
>> +		 * instead of FETCH_REQ
>> +		 */
>> +		if (io->flags & UBLK_IO_FLAG_OWNED_BY_SRV)
>> +			goto out;
>> +		/* FETCH_RQ has to provide IO buffer */
>> +		if (!ub_cmd->addr)
>> +			goto out;
>> +		io->cmd = cmd;
>> +		io->flags |= UBLK_IO_FLAG_ACTIVE;
>> +		io->addr = ub_cmd->addr;
>> +
>> +		ublk_mark_io_ready(ub, ubq);
>> +		break;
>> +	case UBLK_IO_COMMIT_AND_FETCH_REQ:
>> +		/* FETCH_RQ has to provide IO buffer */
>> +		if (!ub_cmd->addr)
>> +			goto out;
>> +		io->addr = ub_cmd->addr;
>> +		io->flags |= UBLK_IO_FLAG_ACTIVE;
>> +		fallthrough;
>> +	case UBLK_IO_COMMIT_REQ:
>> +		io->cmd = cmd;
>> +		if (!(io->flags & UBLK_IO_FLAG_OWNED_BY_SRV))
>> +			goto out;
>> +		ublk_commit_completion(ub, ub_cmd);
>> +
>> +		/* COMMIT_REQ is supposed to not fetch req */
> 
> I wonder if we could make it without IO_COMMIT_REQ.  Is it useful to be
> able to commit without fetching a new request?

UBLK_IO_COMMIT_REQ is not necessary, IMO. 
In current version of ubd_drv.c I find UBLK_IO_COMMIT_REQ is sent by ublksrv
after it gets one UBD_IO_RES_ABORT beacuse ubd_drv wants to abort IOs and let
the ublk daemon exit.

We can use UBLK_IO_COMMIT_AND_FETCH_REQ to replace UBLK_IO_COMMIT_REQ.
The data flow could be:

1) UBLK_IO_COMMIT_AND_FETCH_REQ from ublksrv

2) ubd_drv receives IO's sqe with UBLK_IO_COMMIT_AND_FETCH_REQ
   and sets the IO's status to UBLK_IO_QUEUED

3) ubd_drv wants to abort IOs so it just completes
   this IO's cqe(UBD_IO_RES_ABORT)

I successfully removed UBLK_IO_COMMIT_REQ when developing libubd
although I choose the earliest version of ubd_drv.c(v5.17-ubd-dev)
which may be a buggy version.

> 
>> +		if (cmd_op == UBLK_IO_COMMIT_REQ) {
>> +			ret = UBLK_IO_RES_OK;
>> +			goto out;
>> +		}
>> +		break;
>> +	default:
>> +		goto out;
>> +	}
>> +	return -EIOCBQUEUED;
>> +
>> + out:
>> +	io->flags &= ~UBLK_IO_FLAG_ACTIVE;
>> +	io_uring_cmd_done(cmd, ret, 0);
>> +	pr_devel("%s: complete: cmd op %d, tag %d ret %x io_flags %x\n",
>> +			__func__, cmd_op, tag, ret, io->flags);
>> +	return -EIOCBQUEUED;
>> +}
>> +
> 
> Thanks!
>
Ming Lei July 5, 2022, 8:06 a.m. UTC | #13
On Mon, Jul 04, 2022 at 06:10:40PM -0400, Gabriel Krisman Bertazi wrote:
> Ming Lei <ming.lei@redhat.com> writes:
> 
> > This is the driver part of userspace block driver(ublk driver), the other
> > part is userspace daemon part(ublksrv)[1].
> >
> > The two parts communicate by io_uring's IORING_OP_URING_CMD with one
> > shared cmd buffer for storing io command, and the buffer is read only for
> > ublksrv, each io command is indexed by io request tag directly, and
> > is written by ublk driver.
> >
> > For example, when one READ io request is submitted to ublk block driver, ublk
> > driver stores the io command into cmd buffer first, then completes one
> > IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to
> > ublk driver beforehand by ublksrv for getting notification of any new io request,
> > and each URING_CMD is associated with one io request by tag.
> >
> > After ublksrv gets the io command, it translates and handles the ublk io
> > request, such as, for the ublk-loop target, ublksrv translates the request
> > into same request on another file or disk, like the kernel loop block
> > driver. In ublksrv's implementation, the io is still handled by io_uring,
> > and share same ring with IORING_OP_URING_CMD command. When the target io
> > request is done, the same IORING_OP_URING_CMD is issued to ublk driver for
> > both committing io request result and getting future notification of new
> > io request.
> >
> > Another thing done by ublk driver is to copy data between kernel io
> > request and ublksrv's io buffer:
> >
> > 1) before ubsrv handles WRITE request, copy the request's data into
> > ublksrv's userspace io buffer, so that ublksrv can handle the write
> > request
> >
> > 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer
> > into this READ request, then ublk driver can complete the READ request
> >
> > Zero copy may be switched if mm is ready to support it.
> >
> > ublk driver doesn't handle any logic of the specific user space driver,
> > so it should be small/simple enough.
> >
> > [1] ublksrv
> >
> > https://github.com/ming1/ubdsrv
> >
> > Signed-off-by: Ming Lei <ming.lei@redhat.com>
> 
> Hi Ming,
> 
> A few comments inline:

Hi Gabriel,

Thanks for your review!

> 
> 
> > +#define UBLK_MINORS		(1U << MINORBITS)
> > +
> > +struct ublk_rq_data {
> > +	struct callback_head work;
> > +};
> > +
> > +/* io cmd is active: sqe cmd is received, and its cqe isn't done */
> > +#define UBLK_IO_FLAG_ACTIVE	0x01
> > +
> > +/*
> > + * FETCH io cmd is completed via cqe, and the io cmd is being handled by
> > + * ublksrv, and not committed yet
> > + */
> > +#define UBLK_IO_FLAG_OWNED_BY_SRV 0x02
> > +
> 
> Minor nit: I wonder if the IO life cycle isn't better represented as a
> state machine than flags:
> 
> enum {
>    UBLK_IO_FREE,
>    UBLK_IO_QUEUED
>    UBLK_IO_OWNED_BY_SRV
>    UBLK_IO_COMPLETED,
>    UBLK_IO_ABORTED,
> }
> 
> Since currently, IO_FLAG_ACTIVE and IO_OWNED_BY_SRV should (almost) be
> mutually exclusive.

Right, IO_OWNED_BY_SRV can be killed, and its only purpose could be just
cross-verification.

So only two flags of IO_FLAG_ACTIVE and IO_FLAG_REQ_FAILED are
useful:

1) IO_FLAG_ACTIVE means the io command is owned by ublk driver, and it
becomes zero after completing the io_uring io command, triggered by one
incoming ublk block io request.

2) IO_FLAG_REQ_FAILED is set after aborting is triggered, any inflight
ublk io request and to-be-queued request via this slot should be ended
immediately.

At least it works for current requirements.

Io state machine may not work perfectly here, especially more states
results in more complicated handling, such as, N states may need

	N * (N - 1)

transitions.

Also there isn't UBLK_IO_FREE state, the io slot is always used, either
in ublk driver side, or ublk server side.

No UBLK_IO_QUEUED state too, the handling is to complete the io command
for notifying ublksrv to handle the request, and hard to abstract the
QUEUED state.

UBLK_IO_OWNED_BY_SRV is same with !IO_FLAG_ACTIVE.

UBLK_IO_COMPLETED is basically same with
!IO_FLAG_ACTIVE->IO_FLAG_ACTIVE, and it is one transient state.

UBLK_IO_ABORTED is basically same with IO_FLAG_REQ_FAILED.

So we can solve the problem with simpler abstraction, instead of
making it over complicated.

> 
> 
> > +
> > +static int ublk_ctrl_stop_dev(struct ublk_device *ub)
> > +{
> > +	ublk_stop_dev(ub);
> > +	cancel_work_sync(&ub->stop_work);
> > +	return 0;
> > +}
> > +
> > +static inline bool ublk_queue_ready(struct ublk_queue *ubq)
> > +{
> > +	return ubq->nr_io_ready == ubq->q_depth;
> > +}
> > +
> > +/* device can only be started after all IOs are ready */
> > +static void ublk_mark_io_ready(struct ublk_device *ub, struct ublk_queue *ubq)
> > +{
> > +	mutex_lock(&ub->mutex);
> > +	ubq->nr_io_ready++;
> 
> I think this is still problematic for the case where a FETCH_IO is sent
> from a different thread than the one originally set in ubq_daemon
> (i.e. a userspace bug).  Since ubq_daemon is used to decide what task
> context will do the data copy, If an IO_FETCH_RQ is sent to the same queue
> from two threads, the data copy can happen in the context of the wrong
> task.  I'd suggest something like the check below at the beginning of
> mark_io_ready and a similar on for IO_COMMIT_AND_FETCH_RQ
> 
> 	mutex_lock(&ub->mutex);
>         if (ub->ubq_daemon && ub->ubq_daemon != current) {
>            mutex_unlock(&ub->mutex);
>            return -EINVAL;
>         }
> 	ubq->nr_io_ready++;

The check is good, will add it, but ub->mutex isn't required, especially
IO_COMMIT_AND_FETCH_RQ is in fast path.

>         ...
> > +	if (ublk_queue_ready(ubq)) {
> > +		ubq->ubq_daemon = current;
> > +		get_task_struct(ubq->ubq_daemon);
> > +		ub->nr_queues_ready++;
> > +	}
> > +	if (ub->nr_queues_ready == ub->dev_info.nr_hw_queues)
> > +		complete_all(&ub->completion);
> > +	mutex_unlock(&ub->mutex);
> > +}
> > +
> > +static int ublk_ch_uring_cmd(struct io_uring_cmd *cmd, unsigned int issue_flags)
> > +{
> > +	struct ublksrv_io_cmd *ub_cmd = (struct ublksrv_io_cmd *)cmd->cmd;
> > +	struct ublk_device *ub = cmd->file->private_data;
> > +	struct ublk_queue *ubq;
> > +	struct ublk_io *io;
> > +	u32 cmd_op = cmd->cmd_op;
> > +	unsigned tag = ub_cmd->tag;
> > +	int ret = -EINVAL;
> > +
> > +	pr_devel("%s: receieved: cmd op %d queue %d tag %d result %d\n",
> 
>                          ^^^
>                          received

OK.

> 
> 
> > +			__func__, cmd->cmd_op, ub_cmd->q_id, tag,
> > +			ub_cmd->result);
> > +
> > +	if (!(issue_flags & IO_URING_F_SQE128))
> > +		goto out;
> > +
> > +	ubq = ublk_get_queue(ub, ub_cmd->q_id);
> > +	if (!ubq || ub_cmd->q_id != ubq->q_id)
> 
> q_id is coming from userspace and is used to access an array inside
> ublk_get_queue().  I think you need to ensure qid < ub->dev_info.nr_hw_queues
> before calling ublk_get_queue() to protect from a kernel bad memory
> access triggered by userspace.

Good catch!

> 
> > +		goto out;
> > +
> > +	if (WARN_ON_ONCE(tag >= ubq->q_depth))
> 
> Userspace shouldn't be able to easily trigger a WARN_ON.

OK, we can simply fail the io command submission.

> 
> > +		goto out;
> > +
> > +	io = &ubq->ios[tag];
> > +
> > +	/* there is pending io cmd, something must be wrong */
> > +	if (io->flags & UBLK_IO_FLAG_ACTIVE) {b
> > +		ret = -EBUSY;
> > +		goto out;
> > +	}
> > +
> > +	switch (cmd_op) {
> > +	case UBLK_IO_FETCH_REQ:
> > +		/* UBLK_IO_FETCH_REQ is only allowed before queue is setup */
> > +		if (WARN_ON_ONCE(ublk_queue_ready(ubq))) {
> 
> Likewise, this shouldn't trigger a WARN_ON, IMO.

OK.

> 
> > +			ret = -EBUSY;
> > +			goto out;
> > +		}
> > +		/*
> > +		 * The io is being handled by server, so COMMIT_RQ is expected
> > +		 * instead of FETCH_REQ
> > +		 */
> > +		if (io->flags & UBLK_IO_FLAG_OWNED_BY_SRV)
> > +			goto out;
> > +		/* FETCH_RQ has to provide IO buffer */
> > +		if (!ub_cmd->addr)
> > +			goto out;
> > +		io->cmd = cmd;
> > +		io->flags |= UBLK_IO_FLAG_ACTIVE;
> > +		io->addr = ub_cmd->addr;
> > +
> > +		ublk_mark_io_ready(ub, ubq);
> > +		break;
> > +	case UBLK_IO_COMMIT_AND_FETCH_REQ:
> > +		/* FETCH_RQ has to provide IO buffer */
> > +		if (!ub_cmd->addr)
> > +			goto out;
> > +		io->addr = ub_cmd->addr;
> > +		io->flags |= UBLK_IO_FLAG_ACTIVE;
> > +		fallthrough;
> > +	case UBLK_IO_COMMIT_REQ:
> > +		io->cmd = cmd;
> > +		if (!(io->flags & UBLK_IO_FLAG_OWNED_BY_SRV))
> > +			goto out;
> > +		ublk_commit_completion(ub, ub_cmd);
> > +
> > +		/* COMMIT_REQ is supposed to not fetch req */
> 
> I wonder if we could make it without IO_COMMIT_REQ.  Is it useful to be
> able to commit without fetching a new request?

UBLK_IO_COMMIT_AND_FETCH_REQ should cover both, since IO_COMMIT_REQ is
only submitted after aborting, and at that time the fetch action of
IO_COMMIT_AND_FETCH_REQ will be failed in ublk_cancel_queue. So I think
we can remove IO_COMMIT_REQ.


Thanks, 
Ming
Ming Lei July 5, 2022, 8:12 a.m. UTC | #14
On Tue, Jul 05, 2022 at 12:16:07PM +0800, Ziyang Zhang wrote:
> On 2022/7/5 06:10, Gabriel Krisman Bertazi wrote:
> > Ming Lei <ming.lei@redhat.com> writes:
> > 
> >> This is the driver part of userspace block driver(ublk driver), the other
> >> part is userspace daemon part(ublksrv)[1].
> >>
> >> The two parts communicate by io_uring's IORING_OP_URING_CMD with one
> >> shared cmd buffer for storing io command, and the buffer is read only for
> >> ublksrv, each io command is indexed by io request tag directly, and
> >> is written by ublk driver.
> >>
> >> For example, when one READ io request is submitted to ublk block driver, ublk
> >> driver stores the io command into cmd buffer first, then completes one
> >> IORING_OP_URING_CMD for notifying ublksrv, and the URING_CMD is issued to
> >> ublk driver beforehand by ublksrv for getting notification of any new io request,
> >> and each URING_CMD is associated with one io request by tag.
> >>
> >> After ublksrv gets the io command, it translates and handles the ublk io
> >> request, such as, for the ublk-loop target, ublksrv translates the request
> >> into same request on another file or disk, like the kernel loop block
> >> driver. In ublksrv's implementation, the io is still handled by io_uring,
> >> and share same ring with IORING_OP_URING_CMD command. When the target io
> >> request is done, the same IORING_OP_URING_CMD is issued to ublk driver for
> >> both committing io request result and getting future notification of new
> >> io request.
> >>
> >> Another thing done by ublk driver is to copy data between kernel io
> >> request and ublksrv's io buffer:
> >>
> >> 1) before ubsrv handles WRITE request, copy the request's data into
> >> ublksrv's userspace io buffer, so that ublksrv can handle the write
> >> request
> >>
> >> 2) after ubsrv handles READ request, copy ublksrv's userspace io buffer
> >> into this READ request, then ublk driver can complete the READ request
> >>
> >> Zero copy may be switched if mm is ready to support it.
> >>
> >> ublk driver doesn't handle any logic of the specific user space driver,
> >> so it should be small/simple enough.
> >>
> >> [1] ublksrv
> >>
> >> https://github.com/ming1/ubdsrv
> >>
> >> Signed-off-by: Ming Lei <ming.lei@redhat.com>
> > 
> > Hi Ming,
> > 
> > A few comments inline:
> > 
> > 
> >> +#define UBLK_MINORS		(1U << MINORBITS)
> >> +
> >> +struct ublk_rq_data {
> >> +	struct callback_head work;
> >> +};
> >> +
> >> +/* io cmd is active: sqe cmd is received, and its cqe isn't done */
> >> +#define UBLK_IO_FLAG_ACTIVE	0x01
> >> +
> >> +/*
> >> + * FETCH io cmd is completed via cqe, and the io cmd is being handled by
> >> + * ublksrv, and not committed yet
> >> + */
> >> +#define UBLK_IO_FLAG_OWNED_BY_SRV 0x02
> >> +
> > 
> > Minor nit: I wonder if the IO life cycle isn't better represented as a
> > state machine than flags:
> > 
> > enum {
> >    UBLK_IO_FREE,
> >    UBLK_IO_QUEUED
> >    UBLK_IO_OWNED_BY_SRV
> >    UBLK_IO_COMPLETED,
> >    UBLK_IO_ABORTED,
> > }
> > 
> > Since currently, IO_FLAG_ACTIVE and IO_OWNED_BY_SRV should (almost) be
> > mutually exclusive.
> > 
> > 
> >> +
> >> +static int ublk_ctrl_stop_dev(struct ublk_device *ub)
> >> +{
> >> +	ublk_stop_dev(ub);
> >> +	cancel_work_sync(&ub->stop_work);
> >> +	return 0;
> >> +}
> >> +
> >> +static inline bool ublk_queue_ready(struct ublk_queue *ubq)
> >> +{
> >> +	return ubq->nr_io_ready == ubq->q_depth;
> >> +}
> >> +
> >> +/* device can only be started after all IOs are ready */
> >> +static void ublk_mark_io_ready(struct ublk_device *ub, struct ublk_queue *ubq)
> >> +{
> >> +	mutex_lock(&ub->mutex);
> >> +	ubq->nr_io_ready++;
> > 
> > I think this is still problematic for the case where a FETCH_IO is sent
> > from a different thread than the one originally set in ubq_daemon
> > (i.e. a userspace bug).  Since ubq_daemon is used to decide what task
> > context will do the data copy, If an IO_FETCH_RQ is sent to the same queue
> > from two threads, the data copy can happen in the context of the wrong
> > task.  I'd suggest something like the check below at the beginning of
> > mark_io_ready and a similar on for IO_COMMIT_AND_FETCH_RQ
> > 
> > 	mutex_lock(&ub->mutex);
> >         if (ub->ubq_daemon && ub->ubq_daemon != current) {
> >            mutex_unlock(&ub->mutex);
> >            return -EINVAL;
> >         }
> > 	ubq->nr_io_ready++;
> >         ...
> >> +	if (ublk_queue_ready(ubq)) {
> >> +		ubq->ubq_daemon = current;
> >> +		get_task_struct(ubq->ubq_daemon);
> >> +		ub->nr_queues_ready++;
> >> +	}
> >> +	if (ub->nr_queues_ready == ub->dev_info.nr_hw_queues)
> >> +		complete_all(&ub->completion);
> >> +	mutex_unlock(&ub->mutex);
> >> +}
> >> +
> >> +static int ublk_ch_uring_cmd(struct io_uring_cmd *cmd, unsigned int issue_flags)
> >> +{
> >> +	struct ublksrv_io_cmd *ub_cmd = (struct ublksrv_io_cmd *)cmd->cmd;
> >> +	struct ublk_device *ub = cmd->file->private_data;
> >> +	struct ublk_queue *ubq;
> >> +	struct ublk_io *io;
> >> +	u32 cmd_op = cmd->cmd_op;
> >> +	unsigned tag = ub_cmd->tag;
> >> +	int ret = -EINVAL;
> >> +
> >> +	pr_devel("%s: receieved: cmd op %d queue %d tag %d result %d\n",
> > 
> >                          ^^^
> >                          received
> > 
> > 
> >> +			__func__, cmd->cmd_op, ub_cmd->q_id, tag,
> >> +			ub_cmd->result);
> >> +
> >> +	if (!(issue_flags & IO_URING_F_SQE128))
> >> +		goto out;
> >> +
> >> +	ubq = ublk_get_queue(ub, ub_cmd->q_id);
> >> +	if (!ubq || ub_cmd->q_id != ubq->q_id)
> > 
> > q_id is coming from userspace and is used to access an array inside
> > ublk_get_queue().  I think you need to ensure qid < ub->dev_info.nr_hw_queues
> > before calling ublk_get_queue() to protect from a kernel bad memory
> > access triggered by userspace.
> > 
> >> +		goto out;
> >> +
> >> +	if (WARN_ON_ONCE(tag >= ubq->q_depth))
> > 
> > Userspace shouldn't be able to easily trigger a WARN_ON.
> > 
> >> +		goto out;
> >> +
> >> +	io = &ubq->ios[tag];
> >> +
> >> +	/* there is pending io cmd, something must be wrong */
> >> +	if (io->flags & UBLK_IO_FLAG_ACTIVE) {b
> >> +		ret = -EBUSY;
> >> +		goto out;
> >> +	}
> >> +
> >> +	switch (cmd_op) {
> >> +	case UBLK_IO_FETCH_REQ:
> >> +		/* UBLK_IO_FETCH_REQ is only allowed before queue is setup */
> >> +		if (WARN_ON_ONCE(ublk_queue_ready(ubq))) {
> > 
> > Likewise, this shouldn't trigger a WARN_ON, IMO.
> > 
> >> +			ret = -EBUSY;
> >> +			goto out;
> >> +		}
> >> +		/*
> >> +		 * The io is being handled by server, so COMMIT_RQ is expected
> >> +		 * instead of FETCH_REQ
> >> +		 */
> >> +		if (io->flags & UBLK_IO_FLAG_OWNED_BY_SRV)
> >> +			goto out;
> >> +		/* FETCH_RQ has to provide IO buffer */
> >> +		if (!ub_cmd->addr)
> >> +			goto out;
> >> +		io->cmd = cmd;
> >> +		io->flags |= UBLK_IO_FLAG_ACTIVE;
> >> +		io->addr = ub_cmd->addr;
> >> +
> >> +		ublk_mark_io_ready(ub, ubq);
> >> +		break;
> >> +	case UBLK_IO_COMMIT_AND_FETCH_REQ:
> >> +		/* FETCH_RQ has to provide IO buffer */
> >> +		if (!ub_cmd->addr)
> >> +			goto out;
> >> +		io->addr = ub_cmd->addr;
> >> +		io->flags |= UBLK_IO_FLAG_ACTIVE;
> >> +		fallthrough;
> >> +	case UBLK_IO_COMMIT_REQ:
> >> +		io->cmd = cmd;
> >> +		if (!(io->flags & UBLK_IO_FLAG_OWNED_BY_SRV))
> >> +			goto out;
> >> +		ublk_commit_completion(ub, ub_cmd);
> >> +
> >> +		/* COMMIT_REQ is supposed to not fetch req */
> > 
> > I wonder if we could make it without IO_COMMIT_REQ.  Is it useful to be
> > able to commit without fetching a new request?
> 
> UBLK_IO_COMMIT_REQ is not necessary, IMO. 
> In current version of ubd_drv.c I find UBLK_IO_COMMIT_REQ is sent by ublksrv
> after it gets one UBD_IO_RES_ABORT beacuse ubd_drv wants to abort IOs and let
> the ublk daemon exit.
> 
> We can use UBLK_IO_COMMIT_AND_FETCH_REQ to replace UBLK_IO_COMMIT_REQ.
> The data flow could be:
> 
> 1) UBLK_IO_COMMIT_AND_FETCH_REQ from ublksrv
> 
> 2) ubd_drv receives IO's sqe with UBLK_IO_COMMIT_AND_FETCH_REQ
>    and sets the IO's status to UBLK_IO_QUEUED

Not see where UBLK_IO_QUEUED is? :-)

> 
> 3) ubd_drv wants to abort IOs so it just completes
>    this IO's cqe(UBD_IO_RES_ABORT)
> 
> I successfully removed UBLK_IO_COMMIT_REQ when developing libubd
> although I choose the earliest version of ubd_drv.c(v5.17-ubd-dev)
> which may be a buggy version.

You can verify it with latest ublksrv(libublksrv has been in master)
too by the following patch, then 'make test T=generic' can run
successfully.

diff --git a/lib/ublksrv.c b/lib/ublksrv.c
index c4bb2f4..aee71a0 100644
--- a/lib/ublksrv.c
+++ b/lib/ublksrv.c
@@ -150,7 +150,7 @@ static inline int ublksrv_queue_io_cmd(struct ublksrv_queue *q,
                else
                        cmd_op = UBLK_IO_FETCH_REQ;
        } else if (io->flags & UBLKSRV_NEED_COMMIT_RQ_COMP) {
-                       cmd_op = UBLK_IO_COMMIT_REQ;
+                       cmd_op = UBLK_IO_COMMIT_AND_FETCH_REQ;
        } else {
                syslog(LOG_ERR, "io flags is zero, tag %d\n",
                                (int)cmd->tag);

ublk_cancel_queue() will cancel all these io commands.


Thanks,
Ming
Ming Lei July 7, 2022, 7:49 a.m. UTC | #15
On Tue, Jul 05, 2022 at 04:06:16PM +0800, Ming Lei wrote:
> On Mon, Jul 04, 2022 at 06:10:40PM -0400, Gabriel Krisman Bertazi wrote:
> > Ming Lei <ming.lei@redhat.com> writes:

...
> 
> > 
> > 
> > > +			__func__, cmd->cmd_op, ub_cmd->q_id, tag,
> > > +			ub_cmd->result);
> > > +
> > > +	if (!(issue_flags & IO_URING_F_SQE128))
> > > +		goto out;
> > > +
> > > +	ubq = ublk_get_queue(ub, ub_cmd->q_id);
> > > +	if (!ubq || ub_cmd->q_id != ubq->q_id)
> > 
> > q_id is coming from userspace and is used to access an array inside
> > ublk_get_queue().  I think you need to ensure qid < ub->dev_info.nr_hw_queues
> > before calling ublk_get_queue() to protect from a kernel bad memory
> > access triggered by userspace.
> 
> Good catch!

Turns out the check on 'qid < ub->dev_info.nr_hw_queues' isn't needed,
since the condition of 'ub_cmd->q_id != ubq->q_id' is more strict.


Thanks,
Ming
Ming Lei July 7, 2022, 7:58 a.m. UTC | #16
On Thu, Jul 07, 2022 at 03:49:52PM +0800, Ming Lei wrote:
> On Tue, Jul 05, 2022 at 04:06:16PM +0800, Ming Lei wrote:
> > On Mon, Jul 04, 2022 at 06:10:40PM -0400, Gabriel Krisman Bertazi wrote:
> > > Ming Lei <ming.lei@redhat.com> writes:
> 
> ...
> > 
> > > 
> > > 
> > > > +			__func__, cmd->cmd_op, ub_cmd->q_id, tag,
> > > > +			ub_cmd->result);
> > > > +
> > > > +	if (!(issue_flags & IO_URING_F_SQE128))
> > > > +		goto out;
> > > > +
> > > > +	ubq = ublk_get_queue(ub, ub_cmd->q_id);
> > > > +	if (!ubq || ub_cmd->q_id != ubq->q_id)
> > > 
> > > q_id is coming from userspace and is used to access an array inside
> > > ublk_get_queue().  I think you need to ensure qid < ub->dev_info.nr_hw_queues
> > > before calling ublk_get_queue() to protect from a kernel bad memory
> > > access triggered by userspace.
> > 
> > Good catch!
> 
> Turns out the check on 'qid < ub->dev_info.nr_hw_queues' isn't needed,
> since the condition of 'ub_cmd->q_id != ubq->q_id' is more strict.

But ubq is retrieved via ->q_id, so we do need the validation.

Sorry for the noise.

Thanks,
Ming
diff mbox series

Patch

diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig
index fdb81f2794cd..d218089cdbec 100644
--- a/drivers/block/Kconfig
+++ b/drivers/block/Kconfig
@@ -408,6 +408,12 @@  config BLK_DEV_RBD
 
 	  If unsure, say N.
 
+config BLK_DEV_UBLK
+	bool "Userspace block driver"
+	select IO_URING
+	help
+          io uring based userspace block driver.
+
 source "drivers/block/rnbd/Kconfig"
 
 endif # BLK_DEV
diff --git a/drivers/block/Makefile b/drivers/block/Makefile
index 934a9c7c3a7c..be631352567e 100644
--- a/drivers/block/Makefile
+++ b/drivers/block/Makefile
@@ -39,4 +39,6 @@  obj-$(CONFIG_BLK_DEV_RNBD)	+= rnbd/
 
 obj-$(CONFIG_BLK_DEV_NULL_BLK)	+= null_blk/
 
+obj-$(CONFIG_BLK_DEV_UBLK)			+= ublk_drv.o
+
 swim_mod-y	:= swim.o swim_asm.o
diff --git a/drivers/block/ublk_drv.c b/drivers/block/ublk_drv.c
new file mode 100644
index 000000000000..d37f05f359c5
--- /dev/null
+++ b/drivers/block/ublk_drv.c
@@ -0,0 +1,1603 @@ 
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Userspace block device - block device which IO is handled from userspace
+ *
+ * Take full use of io_uring passthrough command for communicating with
+ * ublk userspace daemon(ublksrvd) for handling basic IO request.
+ *
+ * Copyright 2022 Ming Lei <ming.lei@redhat.com>
+ *
+ * (part of code stolen from loop.c)
+ */
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/sched.h>
+#include <linux/fs.h>
+#include <linux/pagemap.h>
+#include <linux/file.h>
+#include <linux/stat.h>
+#include <linux/errno.h>
+#include <linux/major.h>
+#include <linux/wait.h>
+#include <linux/blkdev.h>
+#include <linux/init.h>
+#include <linux/swap.h>
+#include <linux/slab.h>
+#include <linux/compat.h>
+#include <linux/mutex.h>
+#include <linux/writeback.h>
+#include <linux/completion.h>
+#include <linux/highmem.h>
+#include <linux/sysfs.h>
+#include <linux/miscdevice.h>
+#include <linux/falloc.h>
+#include <linux/uio.h>
+#include <linux/ioprio.h>
+#include <linux/sched/mm.h>
+#include <linux/uaccess.h>
+#include <linux/cdev.h>
+#include <linux/io_uring.h>
+#include <linux/blk-mq.h>
+#include <linux/delay.h>
+#include <linux/mm.h>
+#include <asm/page.h>
+#include <linux/task_work.h>
+#include <uapi/linux/ublk_cmd.h>
+
+#define UBLK_MINORS		(1U << MINORBITS)
+
+struct ublk_rq_data {
+	struct callback_head work;
+};
+
+/* io cmd is active: sqe cmd is received, and its cqe isn't done */
+#define UBLK_IO_FLAG_ACTIVE	0x01
+
+/*
+ * FETCH io cmd is completed via cqe, and the io cmd is being handled by
+ * ublksrv, and not committed yet
+ */
+#define UBLK_IO_FLAG_OWNED_BY_SRV 0x02
+
+/*
+ * request has been failed, only used in handling aborting, and after
+ * this flag is observed, this request will be failed immediately
+ */
+#define UBLK_IO_FLAG_REQ_FAILED 0x04
+
+struct ublk_io {
+	/* userspace buffer address from io cmd */
+	__u64	addr;
+	unsigned int flags;
+	int res;
+
+	struct io_uring_cmd *cmd;
+};
+
+struct ublk_queue {
+	int q_id;
+	int q_depth;
+
+	struct task_struct	*ubq_daemon;
+	char *io_cmd_buf;
+
+	unsigned long io_addr;	/* mapped vm address */
+	unsigned int max_io_sz;
+	bool abort_work_pending;
+	unsigned short nr_io_ready;	/* how many ios setup */
+	struct ublk_device *dev;
+	spinlock_t	abort_lock;
+	struct callback_head abort_work;
+	struct ublk_io ios[0];
+};
+
+#define UBLK_DAEMON_MONITOR_PERIOD	(5 * HZ)
+
+struct ublk_device {
+	struct gendisk		*ub_disk;
+	struct request_queue	*ub_queue;
+
+	char	*__queues;
+
+	unsigned short  queue_size;
+	unsigned short  bs_shift;
+	struct ublksrv_ctrl_dev_info	dev_info;
+
+	struct blk_mq_tag_set	tag_set;
+
+	struct cdev		cdev;
+	struct device		cdev_dev;
+
+	atomic_t		ch_open_cnt;
+	int			ub_number;
+
+	struct mutex		mutex;
+
+	struct completion	completion;
+	unsigned int		nr_queues_ready;
+	atomic_t		nr_aborted_queues;
+
+	/*
+	 * Our ubq->daemon may be killed without any notification, so
+	 * monitor each queue's daemon periodically
+	 */
+	struct delayed_work	monitor_work;
+	struct work_struct	stop_work;
+};
+
+static dev_t ublk_chr_devt;
+static struct class *ublk_chr_class;
+
+static DEFINE_IDR(ublk_index_idr);
+static DEFINE_SPINLOCK(ublk_idr_lock);
+static wait_queue_head_t ublk_idr_wq;	/* wait until one idr is freed */
+
+static DEFINE_MUTEX(ublk_ctl_mutex);
+
+static struct miscdevice ublk_misc;
+
+static struct ublk_device *ublk_get_device(struct ublk_device *ub)
+{
+	if (kobject_get_unless_zero(&ub->cdev_dev.kobj))
+		return ub;
+	return NULL;
+}
+
+static void ublk_put_device(struct ublk_device *ub)
+{
+	put_device(&ub->cdev_dev);
+}
+
+static inline struct ublk_queue *ublk_get_queue(struct ublk_device *dev, int qid)
+{
+       return (struct ublk_queue *)&(dev->__queues[qid * dev->queue_size]);
+}
+
+static inline bool ublk_rq_need_copy(struct request *rq)
+{
+	return rq->bio && bio_has_data(rq->bio);
+}
+
+static inline struct ublksrv_io_desc *ublk_get_iod(struct ublk_queue *ubq, int tag)
+{
+	return (struct ublksrv_io_desc *)
+		&(ubq->io_cmd_buf[tag * sizeof(struct ublksrv_io_desc)]);
+}
+
+static inline char *ublk_queue_cmd_buf(struct ublk_device *ub, int q_id)
+{
+	return ublk_get_queue(ub, q_id)->io_cmd_buf;
+}
+
+static inline int ublk_queue_cmd_buf_size(struct ublk_device *ub, int q_id)
+{
+	struct ublk_queue *ubq = ublk_get_queue(ub, q_id);
+
+	return round_up(ubq->q_depth * sizeof(struct ublksrv_io_desc), PAGE_SIZE);
+}
+
+static int ublk_open(struct block_device *bdev, fmode_t mode)
+{
+	return 0;
+}
+
+static void ublk_release(struct gendisk *disk, fmode_t mode)
+{
+}
+
+static const struct block_device_operations ub_fops = {
+	.owner =	THIS_MODULE,
+	.open =		ublk_open,
+	.release =	ublk_release,
+};
+
+#define UBLK_MAX_PIN_PAGES	32
+
+static inline void ublk_release_pages(struct ublk_queue *ubq, struct page **pages,
+		int nr_pages)
+{
+	int i;
+
+	for (i = 0; i < nr_pages; i++)
+		put_page(pages[i]);
+}
+
+static inline int ublk_pin_user_pages(struct ublk_queue *ubq, u64 start_vm,
+		unsigned int nr_pages, unsigned int gup_flags,
+		struct page **pages)
+{
+	return get_user_pages_fast(start_vm, nr_pages, gup_flags, pages);
+}
+
+static inline unsigned ublk_copy_bv(struct bio_vec *bv, void **bv_addr,
+		void *pg_addr, unsigned int *pg_off,
+		unsigned int *pg_len, bool to_bv)
+{
+	unsigned len = min_t(unsigned, bv->bv_len, *pg_len);
+
+	if (*bv_addr == NULL)
+		*bv_addr = kmap_local_page(bv->bv_page);
+
+	if (to_bv)
+		memcpy(*bv_addr + bv->bv_offset, pg_addr + *pg_off, len);
+	else
+		memcpy(pg_addr + *pg_off, *bv_addr + bv->bv_offset, len);
+
+	bv->bv_offset += len;
+	bv->bv_len -= len;
+	*pg_off += len;
+	*pg_len -= len;
+
+	if (!bv->bv_len) {
+		kunmap_local(*bv_addr);
+		*bv_addr = NULL;
+	}
+
+	return len;
+}
+
+/* copy rq pages to ublksrv vm address pointed by io->addr */
+static int ublk_copy_pages(struct ublk_queue *ubq, struct request *rq, bool to_rq,
+		unsigned int max_bytes)
+{
+	unsigned int gup_flags = to_rq ? 0 : FOLL_WRITE;
+	struct ublk_io *io = &ubq->ios[rq->tag];
+	struct page *pgs[UBLK_MAX_PIN_PAGES];
+	struct req_iterator req_iter;
+	struct bio_vec bv;
+	const unsigned int rq_bytes = min(blk_rq_bytes(rq), max_bytes);
+	unsigned long start = io->addr, left = rq_bytes;
+	unsigned int idx = 0, pg_len = 0, pg_off = 0;
+	int nr_pin = 0;
+	void *pg_addr = NULL;
+	struct page *curr = NULL;
+
+	rq_for_each_segment(bv, rq, req_iter) {
+		unsigned len, bv_off = bv.bv_offset, bv_len = bv.bv_len;
+		void *bv_addr = NULL;
+
+refill:
+		if (pg_len == 0) {
+			unsigned int off = 0;
+
+			if (pg_addr) {
+				kunmap_local(pg_addr);
+				if (!to_rq)
+					set_page_dirty_lock(curr);
+				pg_addr = NULL;
+			}
+
+			/* refill pages */
+			if (idx >= nr_pin) {
+				unsigned int max_pages;
+
+				ublk_release_pages(ubq, pgs, nr_pin);
+
+				off = start & (PAGE_SIZE - 1);
+				max_pages = min_t(unsigned, (off + left +
+						PAGE_SIZE - 1) >> PAGE_SHIFT,
+						UBLK_MAX_PIN_PAGES);
+				nr_pin = ublk_pin_user_pages(ubq, start,
+						max_pages, gup_flags, pgs);
+				if (nr_pin < 0)
+					goto exit;
+				idx = 0;
+			}
+			pg_off = off;
+			pg_len = min(PAGE_SIZE - off, left);
+			off = 0;
+			curr = pgs[idx++];
+			pg_addr = kmap_local_page(curr);
+		}
+
+		len = ublk_copy_bv(&bv, &bv_addr, pg_addr, &pg_off, &pg_len,
+				to_rq);
+		/* either one of the two has been consumed */
+		WARN_ON_ONCE(bv.bv_len && pg_len);
+		start += len;
+		left -= len;
+
+		/* overflow */
+		WARN_ON_ONCE(left > rq_bytes);
+		WARN_ON_ONCE(bv.bv_len > bv_len);
+		if (bv.bv_len)
+			goto refill;
+
+		bv.bv_len = bv_len;
+		bv.bv_offset = bv_off;
+	}
+	if (pg_addr) {
+		kunmap_local(pg_addr);
+		if (!to_rq)
+			set_page_dirty_lock(curr);
+	}
+	ublk_release_pages(ubq, pgs, nr_pin);
+
+exit:
+	return rq_bytes - left;
+}
+
+#define UBLK_REMAP_BATCH	32
+
+static int ublk_map_io(struct ublk_queue *ubq, struct request *req)
+{
+	const unsigned int rq_bytes = blk_rq_bytes(req);
+	/*
+	 * no zero copy, we delay copy WRITE request data into ublksrv
+	 * context via task_work_add and the big benefit is that pinning
+	 * pages in current context is pretty fast, see ublk_pin_user_pages
+	 */
+	if (req_op(req) != REQ_OP_WRITE && req_op(req) != REQ_OP_FLUSH)
+		return rq_bytes;
+
+	if (!ublk_rq_need_copy(req))
+		return rq_bytes;
+
+	/* convert to data copy in current context */
+	return ublk_copy_pages(ubq, req, false, UINT_MAX);
+}
+
+static int ublk_unmap_io(struct ublk_queue *ubq, struct request *req,
+		struct ublk_io *io)
+{
+	const unsigned int rq_bytes = blk_rq_bytes(req);
+
+	if (req_op(req) == REQ_OP_READ && ublk_rq_need_copy(req)) {
+		WARN_ON_ONCE(io->res > rq_bytes);
+
+		return ublk_copy_pages(ubq, req, true, io->res);
+	}
+	return rq_bytes;
+}
+
+static inline unsigned int ublk_req_build_flags(struct request *req)
+{
+	unsigned flags = 0;
+
+	if (req->cmd_flags & REQ_FAILFAST_DEV)
+		flags |= UBLK_IO_F_FAILFAST_DEV;
+
+	if (req->cmd_flags & REQ_FAILFAST_TRANSPORT)
+		flags |= UBLK_IO_F_FAILFAST_TRANSPORT;
+
+	if (req->cmd_flags & REQ_FAILFAST_DRIVER)
+		flags |= UBLK_IO_F_FAILFAST_DRIVER;
+
+	if (req->cmd_flags & REQ_META)
+		flags |= UBLK_IO_F_META;
+
+	if (req->cmd_flags & REQ_INTEGRITY)
+		flags |= UBLK_IO_F_INTEGRITY;
+
+	if (req->cmd_flags & REQ_FUA)
+		flags |= UBLK_IO_F_FUA;
+
+	if (req->cmd_flags & REQ_PREFLUSH)
+		flags |= UBLK_IO_F_PREFLUSH;
+
+	if (req->cmd_flags & REQ_NOUNMAP)
+		flags |= UBLK_IO_F_NOUNMAP;
+
+	if (req->cmd_flags & REQ_SWAP)
+		flags |= UBLK_IO_F_SWAP;
+
+	return flags;
+}
+
+static int ublk_setup_iod(struct ublk_queue *ubq, struct request *req)
+{
+	struct ublksrv_io_desc *iod = ublk_get_iod(ubq, req->tag);
+	struct ublk_io *io = &ubq->ios[req->tag];
+	u32 ublk_op;
+
+	switch (req_op(req)) {
+	case REQ_OP_READ:
+		ublk_op = UBLK_IO_OP_READ;
+		break;
+	case REQ_OP_WRITE:
+		ublk_op = UBLK_IO_OP_WRITE;
+		break;
+	case REQ_OP_FLUSH:
+		ublk_op = UBLK_IO_OP_FLUSH;
+		break;
+	case REQ_OP_DISCARD:
+		ublk_op = UBLK_IO_OP_DISCARD;
+		break;
+	case REQ_OP_WRITE_ZEROES:
+		ublk_op = UBLK_IO_OP_WRITE_ZEROES;
+		break;
+	default:
+		return BLK_STS_IOERR;
+	}
+
+	/* need to translate since kernel may change */
+	iod->op_flags = ublk_op | ublk_req_build_flags(req);
+	iod->nr_sectors = blk_rq_sectors(req);
+	iod->start_sector = blk_rq_pos(req);
+	iod->addr = io->addr;
+
+	return BLK_STS_OK;
+}
+
+static blk_status_t ublk_queue_rq(struct blk_mq_hw_ctx *hctx,
+		const struct blk_mq_queue_data *bd)
+{
+	struct ublk_queue *ubq = hctx->driver_data;
+	struct request *rq = bd->rq;
+	struct ublk_rq_data *data = blk_mq_rq_to_pdu(rq);
+	enum task_work_notify_mode notify_mode = bd->last ?
+		TWA_SIGNAL_NO_IPI : TWA_NONE;
+	blk_status_t res;
+
+	/* fill iod to slot in io cmd buffer */
+	res = ublk_setup_iod(ubq, rq);
+	if (res != BLK_STS_OK)
+		return BLK_STS_IOERR;
+
+	blk_mq_start_request(bd->rq);
+
+	/*
+	 * run data copy in task work context for WRITE, and complete io_uring
+	 * cmd there too.
+	 *
+	 * This way should improve batching, meantime pinning pages in current
+	 * context is pretty fast.
+	 *
+	 * If we can't add the task work, something must be wrong, schedule
+	 * monitor work immediately.
+	 */
+	if (task_work_add(ubq->ubq_daemon, &data->work, notify_mode)) {
+		struct ublk_device *ub = rq->q->queuedata;
+
+		mod_delayed_work(system_wq, &ub->monitor_work, 0);
+		return BLK_STS_IOERR;
+	}
+
+	return BLK_STS_OK;
+}
+
+static bool ubq_daemon_is_dying(struct ublk_queue *ubq)
+{
+	return ubq->ubq_daemon->flags & PF_EXITING;
+}
+
+static void ublk_commit_rqs(struct blk_mq_hw_ctx *hctx)
+{
+	struct ublk_queue *ubq = hctx->driver_data;
+
+	__set_notify_signal(ubq->ubq_daemon);
+	if (ubq_daemon_is_dying(ubq)) {
+		struct ublk_device *ub = hctx->queue->queuedata;
+
+		mod_delayed_work(system_wq, &ub->monitor_work, 0);
+	}
+}
+
+/* todo: handle partial completion */
+static void ublk_complete_rq(struct request *req)
+{
+	struct ublk_queue *ubq = req->mq_hctx->driver_data;
+	struct ublk_io *io = &ubq->ios[req->tag];
+	unsigned int unmapped_bytes;
+
+	/* failed read IO if nothing is read */
+	if (!io->res && req_op(req) == REQ_OP_READ)
+		io->res = -EIO;
+
+	if (io->res < 0) {
+		blk_mq_end_request(req, errno_to_blk_status(io->res));
+		return;
+	}
+
+	/*
+	 * FLUSH or DISCARD usually won't return bytes returned, so end them
+	 * directly.
+	 *
+	 * Both the two needn't unmap.
+	 */
+	if (req_op(req) != REQ_OP_READ && req_op(req) != REQ_OP_WRITE) {
+		blk_mq_end_request(req, BLK_STS_OK);
+		return;
+	}
+
+	/* for READ request, writing data in iod->addr to rq buffers */
+	unmapped_bytes = ublk_unmap_io(ubq, req, io);
+
+	/*
+	 * Extremely impossible since we got data filled in just before
+	 *
+	 * Re-read simply for this unlikely case.
+	 */
+	if (unlikely(unmapped_bytes < io->res))
+		io->res = unmapped_bytes;
+
+	if (blk_update_request(req, BLK_STS_OK, io->res))
+		blk_mq_requeue_request(req, true);
+	else
+		__blk_mq_end_request(req, BLK_STS_OK);
+}
+
+/*
+ * __ublk_fail_req() may be called from abort context or ->ubq_daemon
+ * context during exiting, so lock is required.
+ *
+ * Also aborting may not be started yet, keep in mind that one failed
+ * request may be issued by block layer again.
+ */
+static void __ublk_fail_req(struct ublk_io *io, struct request *req)
+{
+	WARN_ON_ONCE(io->flags & UBLK_IO_FLAG_ACTIVE);
+
+	if (!(io->flags & UBLK_IO_FLAG_REQ_FAILED)) {
+		io->flags |= UBLK_IO_FLAG_REQ_FAILED;
+		blk_mq_end_request(req, BLK_STS_IOERR);
+	}
+}
+
+#define UBLK_REQUEUE_DELAY_MS	3
+
+static void ublk_rq_task_work_fn(struct callback_head *work)
+{
+	bool task_exiting = !!(current->flags & PF_EXITING);
+	struct ublk_rq_data *data = container_of(work,
+			struct ublk_rq_data, work);
+	struct request *req = blk_mq_rq_from_pdu(data);
+	struct ublk_queue *ubq = req->mq_hctx->driver_data;
+	struct ublk_io *io = &ubq->ios[req->tag];
+	struct ublk_device *ub = req->q->queuedata;
+	int ret;
+
+	pr_devel("%s: complete: op %d, qid %d tag %d ret %d io_flags %x addr %llx\n",
+			__func__, io->cmd->cmd_op, ubq->q_id,  req->tag, ret, io->flags,
+			ublk_get_iod(ubq, req->tag)->addr);
+
+	/*
+	 * If task is exiting, we may be run from exit_task_work() in
+	 * do_exit(), and may race with ublk_abort_queue(), so lock is
+	 * needed.
+	 */
+	if (unlikely(task_exiting)) {
+		ret = -ESRCH;
+		spin_lock(&ubq->abort_lock);
+	} else {
+		unsigned int mapped_bytes = ublk_map_io(ubq, req);
+
+		/*
+		 * Nothing mapped, retry until we succeed.
+		 *
+		 * We may never succeed in mapping any bytes here because of
+		 * OOM. TODO: reserve one buffer with single page pinned for
+		 * providing forward progress guarantee.
+		 */
+		if (unlikely(!mapped_bytes)) {
+			blk_mq_requeue_request(req, false);
+			blk_mq_delay_kick_requeue_list(req->q,
+					UBLK_REQUEUE_DELAY_MS);
+			return;
+		}
+
+		/* partially mapped, update io descriptor */
+		if (unlikely(mapped_bytes != blk_rq_bytes(req)))
+			ublk_get_iod(ubq, req->tag)->nr_sectors =
+				mapped_bytes >> 9;
+		ret = 0;
+	}
+
+	/*
+	 * Or abort isn't started, but the request is re-issued after being
+	 * failed, we still need to fail it one more time.
+         */
+	if (unlikely(io->flags & UBLK_IO_FLAG_REQ_FAILED)) {
+		blk_mq_end_request(req, BLK_STS_IOERR);
+		if (task_exiting)
+			spin_unlock(&ubq->abort_lock);
+		return;
+	}
+
+	/* mark this cmd owned by ublksrv */
+	io->flags |= UBLK_IO_FLAG_OWNED_BY_SRV;
+
+	/*
+	 * clear ACTIVE since we are done with this sqe/cmd slot
+	 * We can only accept io cmd in case of being not active.
+	 */
+	io->flags &= ~UBLK_IO_FLAG_ACTIVE;
+
+	/* tell ublksrv one io request is coming */
+	io_uring_cmd_done(io->cmd, ret, 0);
+
+	/*
+	 * in case task is exiting, our partner has gone, so schedule monitor
+	 * work immediately for aborting queue
+	 */
+	if (task_exiting) {
+		spin_unlock(&ubq->abort_lock);
+		mod_delayed_work(system_wq, &ub->monitor_work, 0);
+	}
+}
+
+static int ublk_init_hctx(struct blk_mq_hw_ctx *hctx, void *driver_data,
+		unsigned int hctx_idx)
+{
+	struct ublk_device *ub = hctx->queue->queuedata;
+	struct ublk_queue *ubq = ublk_get_queue(ub, hctx->queue_num);
+
+	hctx->driver_data = ubq;
+	return 0;
+}
+
+static int ublk_init_rq(struct blk_mq_tag_set *set, struct request *req,
+		unsigned int hctx_idx, unsigned int numa_node)
+{
+	struct ublk_rq_data *data = blk_mq_rq_to_pdu(req);
+
+	init_task_work(&data->work, ublk_rq_task_work_fn);
+
+	return 0;
+}
+
+static const struct blk_mq_ops ublk_mq_ops = {
+	.queue_rq       = ublk_queue_rq,
+	.commit_rqs     = ublk_commit_rqs,
+	.init_hctx	= ublk_init_hctx,
+	.init_request	= ublk_init_rq,
+};
+
+static int ublk_ch_open(struct inode *inode, struct file *filp)
+{
+	struct ublk_device *ub = container_of(inode->i_cdev,
+			struct ublk_device, cdev);
+
+	if (atomic_cmpxchg(&ub->ch_open_cnt, 0, 1) == 0) {
+		filp->private_data = ub;
+		return 0;
+	}
+	return -EBUSY;
+}
+
+static int ublk_ch_release(struct inode *inode, struct file *filp)
+{
+	struct ublk_device *ub = filp->private_data;
+
+	while (atomic_cmpxchg(&ub->ch_open_cnt, 1, 0) != 1)
+		cpu_relax();
+
+	filp->private_data = NULL;
+	return 0;
+}
+
+/* map pre-allocated per-queue cmd buffer to ublksrv daemon */
+static int ublk_ch_mmap(struct file *filp, struct vm_area_struct *vma)
+{
+	struct ublk_device *ub = filp->private_data;
+	size_t sz = vma->vm_end - vma->vm_start;
+	unsigned max_sz = UBLK_MAX_QUEUE_DEPTH * sizeof(struct ublksrv_io_desc);
+	unsigned long pfn, end, phys_off = vma->vm_pgoff << PAGE_SHIFT;
+	int q_id;
+
+	if (vma->vm_flags & VM_WRITE)
+		return -EPERM;
+
+	end = UBLKSRV_CMD_BUF_OFFSET + ub->dev_info.nr_hw_queues * max_sz;
+	if (phys_off < UBLKSRV_CMD_BUF_OFFSET || phys_off >= end)
+		return -EINVAL;
+
+	q_id = (phys_off - UBLKSRV_CMD_BUF_OFFSET) / max_sz;
+	pr_devel("%s: qid %d, pid %d, addr %lx pg_off %lx sz %lu\n",
+			__func__, q_id, current->pid, vma->vm_start,
+			phys_off, (unsigned long)sz);
+
+	if (sz != ublk_queue_cmd_buf_size(ub, q_id))
+		return -EINVAL;
+
+	pfn = virt_to_phys(ublk_queue_cmd_buf(ub, q_id)) >> PAGE_SHIFT;
+	return remap_pfn_range(vma, vma->vm_start, pfn, sz, vma->vm_page_prot);
+}
+
+static void ublk_commit_completion(struct ublk_device *ub,
+		struct ublksrv_io_cmd *ub_cmd)
+{
+	u32 qid = ub_cmd->q_id, tag = ub_cmd->tag;
+	struct ublk_queue *ubq = ublk_get_queue(ub, qid);
+	struct ublk_io *io = &ubq->ios[tag];
+	struct request *req;
+
+	/* now this cmd slot is owned by nbd driver */
+	io->flags &= ~UBLK_IO_FLAG_OWNED_BY_SRV;
+	io->res = ub_cmd->result;
+
+	/* find the io request and complete */
+	req = blk_mq_tag_to_rq(ub->tag_set.tags[qid], tag);
+
+	if (req && likely(!blk_should_fake_timeout(req->q)))
+		ublk_complete_rq(req);
+}
+
+/*
+ * Focus on aborting any in-flight request scheduled to run via task work
+ */
+static void __ublk_abort_queue(struct ublk_device *ub, struct ublk_queue *ubq)
+{
+	bool task_exiting = !!(ubq->ubq_daemon->flags & PF_EXITING);
+	int i;
+
+	if (!task_exiting)
+		goto out;
+
+	for (i = 0; i < ubq->q_depth; i++) {
+		struct ublk_io *io = &ubq->ios[i];
+
+		if (!(io->flags & UBLK_IO_FLAG_ACTIVE)) {
+			struct request *rq;
+
+			/*
+			 * Either we fail the request or ublk_rq_task_work_fn
+			 * will do it
+			 */
+			rq = blk_mq_tag_to_rq(ub->tag_set.tags[ubq->q_id], i);
+			if (rq)
+				__ublk_fail_req(io, rq);
+		}
+	}
+ out:
+	ubq->abort_work_pending = false;
+	ublk_put_device(ub);
+}
+
+static void ublk_queue_task_work_fn(struct callback_head *work)
+{
+	struct ublk_queue *ubq = container_of(work, struct ublk_queue,
+			abort_work);
+
+	/*
+	 * Lock is only required in case of exiting ubq_daemon, but harmless
+	 * to grab it for running from task work too
+	 *
+	 * We are serialized with ublk_rq_task_work_fn() strictly.
+	 */
+	spin_lock(&ubq->abort_lock);
+	__ublk_abort_queue(ubq->dev, ubq);
+	spin_unlock(&ubq->abort_lock);
+}
+
+
+static void ublk_abort_queue(struct ublk_device *ub, struct ublk_queue *ubq)
+{
+	bool put_dev;
+
+	if (!ublk_get_device(ub))
+		return;
+
+	spin_lock(&ubq->abort_lock);
+	if (!ubq->abort_work_pending) {
+		ubq->abort_work_pending = true;
+		put_dev = false;
+		if (task_work_add(ubq->ubq_daemon, &ubq->abort_work,
+					TWA_SIGNAL)) {
+			__ublk_abort_queue(ub, ubq);
+		}
+	} else {
+		put_dev = true;
+	}
+	spin_unlock(&ubq->abort_lock);
+
+	/*
+	 * can't put device with ->abort_lock held, otherwise UAF
+	 * is triggered
+	 */
+	if (put_dev)
+		ublk_put_device(ub);
+}
+
+static void ublk_cancel_queue(struct ublk_queue *ubq)
+{
+	int i;
+
+	for (i = 0; i < ubq->q_depth; i++) {
+		struct ublk_io *io = &ubq->ios[i];
+
+		if (io->flags & UBLK_IO_FLAG_ACTIVE) {
+			io->flags &= ~UBLK_IO_FLAG_ACTIVE;
+			io_uring_cmd_done(io->cmd, UBLK_IO_RES_ABORT, 0);
+		}
+	}
+}
+
+/* Cancel all pending commands, must be called after del_gendisk() returns */
+static void ublk_cancel_dev(struct ublk_device *ub)
+{
+	int i;
+
+	for (i = 0; i < ub->dev_info.nr_hw_queues; i++)
+		ublk_cancel_queue(ublk_get_queue(ub, i));
+}
+
+static void ublk_stop_dev(struct ublk_device *ub)
+{
+	mutex_lock(&ub->mutex);
+	if (!disk_live(ub->ub_disk))
+		goto unlock;
+
+	del_gendisk(ub->ub_disk);
+	ub->dev_info.state = UBLK_S_DEV_DEAD;
+	ub->dev_info.ublksrv_pid = -1;
+	ublk_cancel_dev(ub);
+ unlock:
+	mutex_unlock(&ub->mutex);
+	cancel_delayed_work_sync(&ub->monitor_work);
+}
+
+static int ublk_ctrl_stop_dev(struct ublk_device *ub)
+{
+	ublk_stop_dev(ub);
+	cancel_work_sync(&ub->stop_work);
+	return 0;
+}
+
+static inline bool ublk_queue_ready(struct ublk_queue *ubq)
+{
+	return ubq->nr_io_ready == ubq->q_depth;
+}
+
+/* device can only be started after all IOs are ready */
+static void ublk_mark_io_ready(struct ublk_device *ub, struct ublk_queue *ubq)
+{
+	mutex_lock(&ub->mutex);
+	ubq->nr_io_ready++;
+	if (ublk_queue_ready(ubq)) {
+		ubq->ubq_daemon = current;
+		get_task_struct(ubq->ubq_daemon);
+		ub->nr_queues_ready++;
+	}
+	if (ub->nr_queues_ready == ub->dev_info.nr_hw_queues)
+		complete_all(&ub->completion);
+	mutex_unlock(&ub->mutex);
+}
+
+static int ublk_ch_uring_cmd(struct io_uring_cmd *cmd, unsigned int issue_flags)
+{
+	struct ublksrv_io_cmd *ub_cmd = (struct ublksrv_io_cmd *)cmd->cmd;
+	struct ublk_device *ub = cmd->file->private_data;
+	struct ublk_queue *ubq;
+	struct ublk_io *io;
+	u32 cmd_op = cmd->cmd_op;
+	unsigned tag = ub_cmd->tag;
+	int ret = -EINVAL;
+
+	pr_devel("%s: receieved: cmd op %d queue %d tag %d result %d\n",
+			__func__, cmd->cmd_op, ub_cmd->q_id, tag,
+			ub_cmd->result);
+
+	if (!(issue_flags & IO_URING_F_SQE128))
+		goto out;
+
+	ubq = ublk_get_queue(ub, ub_cmd->q_id);
+	if (!ubq || ub_cmd->q_id != ubq->q_id)
+		goto out;
+
+	if (WARN_ON_ONCE(tag >= ubq->q_depth))
+		goto out;
+
+	io = &ubq->ios[tag];
+
+	/* there is pending io cmd, something must be wrong */
+	if (io->flags & UBLK_IO_FLAG_ACTIVE) {
+		ret = -EBUSY;
+		goto out;
+	}
+
+	switch (cmd_op) {
+	case UBLK_IO_FETCH_REQ:
+		/* UBLK_IO_FETCH_REQ is only allowed before queue is setup */
+		if (WARN_ON_ONCE(ublk_queue_ready(ubq))) {
+			ret = -EBUSY;
+			goto out;
+		}
+		/*
+		 * The io is being handled by server, so COMMIT_RQ is expected
+		 * instead of FETCH_REQ
+		 */
+		if (io->flags & UBLK_IO_FLAG_OWNED_BY_SRV)
+			goto out;
+		/* FETCH_RQ has to provide IO buffer */
+		if (!ub_cmd->addr)
+			goto out;
+		io->cmd = cmd;
+		io->flags |= UBLK_IO_FLAG_ACTIVE;
+		io->addr = ub_cmd->addr;
+
+		ublk_mark_io_ready(ub, ubq);
+		break;
+	case UBLK_IO_COMMIT_AND_FETCH_REQ:
+		/* FETCH_RQ has to provide IO buffer */
+		if (!ub_cmd->addr)
+			goto out;
+		io->addr = ub_cmd->addr;
+		io->flags |= UBLK_IO_FLAG_ACTIVE;
+		fallthrough;
+	case UBLK_IO_COMMIT_REQ:
+		io->cmd = cmd;
+		if (!(io->flags & UBLK_IO_FLAG_OWNED_BY_SRV))
+			goto out;
+		ublk_commit_completion(ub, ub_cmd);
+
+		/* COMMIT_REQ is supposed to not fetch req */
+		if (cmd_op == UBLK_IO_COMMIT_REQ) {
+			ret = UBLK_IO_RES_OK;
+			goto out;
+		}
+		break;
+	default:
+		goto out;
+	}
+	return -EIOCBQUEUED;
+
+ out:
+	io->flags &= ~UBLK_IO_FLAG_ACTIVE;
+	io_uring_cmd_done(cmd, ret, 0);
+	pr_devel("%s: complete: cmd op %d, tag %d ret %x io_flags %x\n",
+			__func__, cmd_op, tag, ret, io->flags);
+	return -EIOCBQUEUED;
+}
+
+static const struct file_operations ublk_ch_fops = {
+	.owner = THIS_MODULE,
+	.open = ublk_ch_open,
+	.release = ublk_ch_release,
+	.llseek = no_llseek,
+	.uring_cmd = ublk_ch_uring_cmd,
+	.mmap = ublk_ch_mmap,
+};
+
+static void ublk_deinit_queue(struct ublk_device *ub, int q_id)
+{
+	int size = ublk_queue_cmd_buf_size(ub, q_id);
+	struct ublk_queue *ubq = ublk_get_queue(ub, q_id);
+
+	if (ubq->ubq_daemon)
+		put_task_struct(ubq->ubq_daemon);
+	if (ubq->io_cmd_buf)
+		free_pages((unsigned long)ubq->io_cmd_buf, get_order(size));
+}
+
+static int ublk_init_queue(struct ublk_device *ub, int q_id)
+{
+	struct ublk_queue *ubq = ublk_get_queue(ub, q_id);
+	gfp_t gfp_flags = GFP_KERNEL | __GFP_ZERO;
+	void *ptr;
+	int size;
+
+	ubq->q_id = q_id;
+	ubq->q_depth = ub->dev_info.queue_depth;
+	size = ublk_queue_cmd_buf_size(ub, q_id);
+
+	ptr = (void *) __get_free_pages(gfp_flags, get_order(size));
+	if (!ptr)
+		return -ENOMEM;
+
+	init_task_work(&ubq->abort_work, ublk_queue_task_work_fn);
+	ubq->io_cmd_buf = ptr;
+	ubq->dev = ub;
+	spin_lock_init(&ubq->abort_lock);
+	return 0;
+}
+
+static void ublk_deinit_queues(struct ublk_device *ub)
+{
+	int nr_queues = ub->dev_info.nr_hw_queues;
+	int i;
+
+	if (!ub->__queues)
+		return;
+
+	for (i = 0; i < nr_queues; i++)
+		ublk_deinit_queue(ub, i);
+	kfree(ub->__queues);
+}
+
+static int ublk_init_queues(struct ublk_device *ub)
+{
+	int nr_queues = ub->dev_info.nr_hw_queues;
+	int depth = ub->dev_info.queue_depth;
+	int ubq_size = sizeof(struct ublk_queue) + depth * sizeof(struct ublk_io);
+	int i, ret = -ENOMEM;
+
+	ub->queue_size = ubq_size;
+	ub->__queues = kcalloc(nr_queues, ubq_size, GFP_KERNEL);
+	if (!ub->__queues)
+		return ret;
+
+	for (i = 0; i < nr_queues; i++) {
+		if (ublk_init_queue(ub, i))
+			goto fail;
+	}
+
+	init_completion(&ub->completion);
+	return 0;
+
+ fail:
+	ublk_deinit_queues(ub);
+	return ret;
+}
+
+static int __ublk_alloc_dev_number(struct ublk_device *ub, int idx)
+{
+	int i = idx;
+	int err;
+
+	spin_lock(&ublk_idr_lock);
+	/* allocate id, if @id >= 0, we're requesting that specific id */
+	if (i >= 0) {
+		err = idr_alloc(&ublk_index_idr, ub, i, i + 1, GFP_NOWAIT);
+		if (err == -ENOSPC)
+			err = -EEXIST;
+	} else {
+		err = idr_alloc(&ublk_index_idr, ub, 0, 0, GFP_NOWAIT);
+	}
+	spin_unlock(&ublk_idr_lock);
+
+	if (err >= 0)
+		ub->ub_number = err;
+
+	return err;
+}
+
+static struct ublk_device *__ublk_create_dev(int idx)
+{
+	struct ublk_device *ub = NULL;
+	int ret;
+
+	ub = kzalloc(sizeof(*ub), GFP_KERNEL);
+	if (!ub)
+		return ERR_PTR(-ENOMEM);
+
+	ret = __ublk_alloc_dev_number(ub, idx);
+	if (ret < 0) {
+		kfree(ub);
+		return ERR_PTR(ret);
+	}
+	return ub;
+}
+
+static void __ublk_destroy_dev(struct ublk_device *ub)
+{
+	spin_lock(&ublk_idr_lock);
+	idr_remove(&ublk_index_idr, ub->ub_number);
+	wake_up_all(&ublk_idr_wq);
+	spin_unlock(&ublk_idr_lock);
+
+	mutex_destroy(&ub->mutex);
+
+	kfree(ub);
+}
+
+static void ublk_cdev_rel(struct device *dev)
+{
+	struct ublk_device *ub = container_of(dev, struct ublk_device, cdev_dev);
+
+	put_disk(ub->ub_disk);
+
+	blk_mq_free_tag_set(&ub->tag_set);
+
+	ublk_deinit_queues(ub);
+
+	__ublk_destroy_dev(ub);
+}
+
+static int ublk_add_chdev(struct ublk_device *ub)
+{
+	struct device *dev = &ub->cdev_dev;
+	int minor = ub->ub_number;
+	int ret;
+
+	dev->parent = ublk_misc.this_device;
+	dev->devt = MKDEV(MAJOR(ublk_chr_devt), minor);
+	dev->class = ublk_chr_class;
+	dev->release = ublk_cdev_rel;
+	device_initialize(dev);
+
+	ret = dev_set_name(dev, "ublkc%d", minor);
+	if (ret)
+		goto fail;
+
+	cdev_init(&ub->cdev, &ublk_ch_fops);
+	ret = cdev_device_add(&ub->cdev, dev);
+	if (ret)
+		goto fail;
+	return 0;
+ fail:
+	put_device(dev);
+	return ret;
+}
+
+static void ublk_stop_work_fn(struct work_struct *work)
+{
+	struct ublk_device *ub =
+		container_of(work, struct ublk_device, stop_work);
+
+	ublk_stop_dev(ub);
+}
+
+static void ublk_daemon_monitor_work(struct work_struct *work)
+{
+	struct ublk_device *ub =
+		container_of(work, struct ublk_device, monitor_work.work);
+	int i;
+
+	for (i = 0; i < ub->dev_info.nr_hw_queues; i++) {
+		struct ublk_queue *ubq = ublk_get_queue(ub, i);
+
+		if (ubq_daemon_is_dying(ubq)) {
+			schedule_work(&ub->stop_work);
+
+			/* abort queue is for making forward progress */
+			ublk_abort_queue(ub, ubq);
+		}
+	}
+
+	/*
+	 * We can't schedule monitor work after ublk_remove() is started.
+	 *
+	 * No need ub->mutex, monitor work are canceled after state is marked
+	 * as DEAD, so DEAD state is observed reliably.
+	 */
+	if (ub->dev_info.state != UBLK_S_DEV_DEAD)
+		schedule_delayed_work(&ub->monitor_work,
+				UBLK_DAEMON_MONITOR_PERIOD);
+}
+
+/* add disk & cdev, cleanup everything in case of failure */
+static int ublk_add_dev(struct ublk_device *ub)
+{
+	unsigned int max_rq_bytes;
+	struct gendisk *disk;
+	int err = -ENOMEM;
+	int bsize;
+
+	/* We are not ready to support zero copy */
+	ub->dev_info.flags[0] &= ~(1ULL << UBLK_F_SUPPORT_ZERO_COPY);
+
+	bsize = ub->dev_info.block_size;
+	ub->bs_shift = ilog2(bsize);
+
+	ub->dev_info.nr_hw_queues = min_t(unsigned int,
+			ub->dev_info.nr_hw_queues, nr_cpu_ids);
+
+	/* make max request buffer size aligned with PAGE_SIZE */
+	max_rq_bytes = round_down(ub->dev_info.rq_max_blocks <<
+			ub->bs_shift, PAGE_SIZE);
+	ub->dev_info.rq_max_blocks = max_rq_bytes >> ub->bs_shift;
+
+	INIT_WORK(&ub->stop_work, ublk_stop_work_fn);
+	INIT_DELAYED_WORK(&ub->monitor_work, ublk_daemon_monitor_work);
+
+	if (ublk_init_queues(ub))
+		goto out_destroy_dev;
+
+	ub->tag_set.ops = &ublk_mq_ops;
+	ub->tag_set.nr_hw_queues = ub->dev_info.nr_hw_queues;
+	ub->tag_set.queue_depth = ub->dev_info.queue_depth;
+	ub->tag_set.numa_node = NUMA_NO_NODE;
+	ub->tag_set.cmd_size = sizeof(struct ublk_rq_data);
+	ub->tag_set.flags = BLK_MQ_F_SHOULD_MERGE;
+	ub->tag_set.driver_data = ub;
+
+	err = blk_mq_alloc_tag_set(&ub->tag_set);
+	if (err)
+		goto out_deinit_queues;
+
+	disk = ub->ub_disk = blk_mq_alloc_disk(&ub->tag_set, ub);
+	if (IS_ERR(disk)) {
+		err = PTR_ERR(disk);
+		goto out_cleanup_tags;
+	}
+	ub->ub_queue = ub->ub_disk->queue;
+
+	ub->ub_queue->queuedata = ub;
+
+	blk_queue_logical_block_size(ub->ub_queue, bsize);
+	blk_queue_physical_block_size(ub->ub_queue, bsize);
+	blk_queue_io_min(ub->ub_queue, bsize);
+
+	blk_queue_max_hw_sectors(ub->ub_queue, ub->dev_info.rq_max_blocks <<
+			(ub->bs_shift - 9));
+	set_capacity(ub->ub_disk, ub->dev_info.dev_blocks << (ub->bs_shift - 9));
+
+	ub->ub_queue->limits.discard_granularity = PAGE_SIZE;
+
+	blk_queue_max_discard_sectors(ub->ub_queue, UINT_MAX >> 9);
+	blk_queue_max_write_zeroes_sectors(ub->ub_queue, UINT_MAX >> 9);
+
+	disk->fops		= &ub_fops;
+	disk->private_data	= ub;
+	disk->queue		= ub->ub_queue;
+	sprintf(disk->disk_name, "ublkb%d", ub->ub_number);
+
+	mutex_init(&ub->mutex);
+
+	/* add char dev so that ublksrv daemon can be setup */
+	err = ublk_add_chdev(ub);
+	if (err)
+		return err;
+
+	/* don't expose disk now until we got start command from cdev */
+
+	return 0;
+
+out_cleanup_tags:
+	blk_mq_free_tag_set(&ub->tag_set);
+out_deinit_queues:
+	ublk_deinit_queues(ub);
+out_destroy_dev:
+	__ublk_destroy_dev(ub);
+	return err;
+}
+
+static void ublk_remove(struct ublk_device *ub)
+{
+	ublk_ctrl_stop_dev(ub);
+
+	cdev_device_del(&ub->cdev, &ub->cdev_dev);
+	put_device(&ub->cdev_dev);
+}
+
+static struct ublk_device *ublk_get_device_from_id(int idx)
+{
+	struct ublk_device *ub = NULL;
+
+	if (idx < 0)
+		return NULL;
+
+	spin_lock(&ublk_idr_lock);
+	ub = idr_find(&ublk_index_idr, idx);
+	if (ub)
+		ub = ublk_get_device(ub);
+	spin_unlock(&ublk_idr_lock);
+
+	return ub;
+}
+
+static int ublk_ctrl_start_dev(struct ublk_device *ub, struct io_uring_cmd *cmd)
+{
+	struct ublksrv_ctrl_cmd *header = (struct ublksrv_ctrl_cmd *)cmd->cmd;
+	int ret = -EINVAL;
+	int ublksrv_pid = (int)header->data[0];
+
+	if (ublksrv_pid <= 0)
+		return ret;
+
+	wait_for_completion_interruptible(&ub->completion);
+
+	schedule_delayed_work(&ub->monitor_work, UBLK_DAEMON_MONITOR_PERIOD);
+
+	mutex_lock(&ub->mutex);
+	if (!disk_live(ub->ub_disk)) {
+		ub->dev_info.ublksrv_pid = ublksrv_pid;
+		ret = add_disk(ub->ub_disk);
+		if (!ret)
+			ub->dev_info.state = UBLK_S_DEV_LIVE;
+	} else {
+		ret = -EEXIST;
+	}
+	mutex_unlock(&ub->mutex);
+
+	return ret;
+}
+
+static struct blk_mq_hw_ctx *ublk_get_hw_queue(struct ublk_device *ub,
+		unsigned int index)
+{
+	struct blk_mq_hw_ctx *hctx;
+	unsigned long i;
+
+	queue_for_each_hw_ctx(ub->ub_queue, hctx, i)
+		if (hctx->queue_num == index)
+			return hctx;
+	return NULL;
+}
+
+static int ublk_ctrl_get_queue_affinity(struct io_uring_cmd *cmd)
+{
+	struct ublksrv_ctrl_cmd *header = (struct ublksrv_ctrl_cmd *)cmd->cmd;
+	void __user *argp = (void __user *)(unsigned long)header->addr;
+	struct blk_mq_hw_ctx *hctx;
+	struct ublk_device *ub;
+	unsigned long queue;
+	unsigned int retlen;
+	int ret;
+
+	ub = ublk_get_device_from_id(header->dev_id);
+	if (!ub)
+		goto out;
+
+	ret = -EINVAL;
+	queue = header->data[0];
+	if (queue >= ub->dev_info.nr_hw_queues)
+		goto out;
+	hctx = ublk_get_hw_queue(ub, queue);
+	if (!hctx)
+		goto out;
+
+	retlen = min_t(unsigned short, header->len, cpumask_size());
+	if (copy_to_user(argp, hctx->cpumask, retlen)) {
+		ret = -EFAULT;
+		goto out;
+	}
+	if (retlen != header->len) {
+		if (clear_user(argp + retlen, header->len - retlen)) {
+			ret = -EFAULT;
+			goto out;
+		}
+	}
+	ret = 0;
+ out:
+	if (ub)
+		ublk_put_device(ub);
+	return ret;
+}
+
+static int ublk_ctrl_add_dev(const struct ublksrv_ctrl_dev_info *info,
+		void __user *argp, int idx)
+{
+	struct ublk_device *ub;
+	int ret;
+
+	ret = mutex_lock_killable(&ublk_ctl_mutex);
+	if (ret)
+		return ret;
+
+	ub = __ublk_create_dev(idx);
+	if (!IS_ERR_OR_NULL(ub)) {
+		memcpy(&ub->dev_info, info, sizeof(*info));
+
+		/* update device id */
+		ub->dev_info.dev_id = ub->ub_number;
+
+		ret = ublk_add_dev(ub);
+		if (!ret) {
+			if (copy_to_user(argp, &ub->dev_info, sizeof(*info))) {
+				ublk_remove(ub);
+				ret = -EFAULT;
+			}
+		}
+	} else {
+		if (IS_ERR(ub))
+			ret = PTR_ERR(ub);
+		else
+			ret = -ENOMEM;
+	}
+	mutex_unlock(&ublk_ctl_mutex);
+
+	return ret;
+}
+
+static inline bool ublk_idr_freed(int id)
+{
+	void *ptr;
+
+	spin_lock(&ublk_idr_lock);
+	ptr = idr_find(&ublk_index_idr, id);
+	spin_unlock(&ublk_idr_lock);
+
+	return ptr == NULL;
+}
+
+static int ublk_ctrl_del_dev(int idx)
+{
+	struct ublk_device *ub;
+	int ret;
+
+	ret = mutex_lock_killable(&ublk_ctl_mutex);
+	if (ret)
+		return ret;
+
+	ub = ublk_get_device_from_id(idx);
+	if (ub) {
+		ublk_remove(ub);
+		ublk_put_device(ub);
+		ret = 0;
+	} else {
+		ret = -ENODEV;
+	}
+
+	/*
+	 * Wait until the idr is removed, then it can be reused after
+	 * DEL_DEV command is returned.
+	 */
+	if (!ret)
+		wait_event(ublk_idr_wq, ublk_idr_freed(idx));
+	mutex_unlock(&ublk_ctl_mutex);
+
+	return ret;
+}
+
+
+static inline void ublk_dump_dev_info(struct ublksrv_ctrl_dev_info *info)
+{
+	pr_devel("%s: dev id %d flags %llx\n", __func__,
+			info->dev_id, info->flags[0]);
+	pr_devel("\t nr_hw_queues %d queue_depth %d block size %d dev_capacity %lld\n",
+			info->nr_hw_queues, info->queue_depth,
+			info->block_size, info->dev_blocks);
+}
+
+static inline void ublk_ctrl_cmd_dump(struct io_uring_cmd *cmd)
+{
+	struct ublksrv_ctrl_cmd *header = (struct ublksrv_ctrl_cmd *)cmd->cmd;
+
+	pr_devel("%s: cmd_op %x, dev id %d qid %d data %llx buf %llx len %u\n",
+			__func__, cmd->cmd_op, header->dev_id, header->queue_id,
+			header->data[0], header->addr, header->len);
+}
+
+static int ublk_ctrl_cmd_validate(struct io_uring_cmd *cmd,
+		struct ublksrv_ctrl_dev_info *info)
+{
+	struct ublksrv_ctrl_cmd *header = (struct ublksrv_ctrl_cmd *)cmd->cmd;
+	u32 cmd_op = cmd->cmd_op;
+	void __user *argp = (void __user *)(unsigned long)header->addr;
+
+	if (!capable(CAP_SYS_ADMIN))
+		return -EPERM;
+
+	switch (cmd_op) {
+	case UBLK_CMD_GET_DEV_INFO:
+		if (header->len < sizeof(*info) || !header->addr)
+			return -EINVAL;
+		break;
+	case UBLK_CMD_ADD_DEV:
+		if (header->len < sizeof(*info) || !header->addr)
+			return -EINVAL;
+		if (copy_from_user(info, argp, sizeof(*info)) != 0)
+			return -EFAULT;
+		ublk_dump_dev_info(info);
+		if (header->dev_id != info->dev_id) {
+			printk(KERN_WARNING "%s: cmd %x, dev id not match %u %u\n",
+					__func__, cmd_op, header->dev_id,
+					info->dev_id);
+			return -EINVAL;
+		}
+		if (header->queue_id != (u16)-1) {
+			printk(KERN_WARNING "%s: cmd %x queue_id is wrong %x\n",
+					__func__, cmd_op, header->queue_id);
+			return -EINVAL;
+		}
+		break;
+	case UBLK_CMD_GET_QUEUE_AFFINITY:
+		if ((header->len * BITS_PER_BYTE) < nr_cpu_ids)
+			return -EINVAL;
+		if (header->len & (sizeof(unsigned long)-1))
+			return -EINVAL;
+		if (!header->addr)
+			return -EINVAL;
+	};
+
+	return 0;
+}
+
+static int ublk_ctrl_uring_cmd(struct io_uring_cmd *cmd,
+		unsigned int issue_flags)
+{
+	struct ublksrv_ctrl_cmd *header = (struct ublksrv_ctrl_cmd *)cmd->cmd;
+	void __user *argp = (void __user *)(unsigned long)header->addr;
+	struct ublksrv_ctrl_dev_info info;
+	u32 cmd_op = cmd->cmd_op;
+	struct ublk_device *ub;
+	int ret = -EINVAL;
+
+	ublk_ctrl_cmd_dump(cmd);
+
+	if (!(issue_flags & IO_URING_F_SQE128))
+		goto out;
+
+	ret = ublk_ctrl_cmd_validate(cmd, &info);
+	if (ret)
+		goto out;
+
+	ret = -ENODEV;
+	switch (cmd_op) {
+	case UBLK_CMD_START_DEV:
+		ub = ublk_get_device_from_id(header->dev_id);
+		if (ub) {
+			ret = ublk_ctrl_start_dev(ub, cmd);
+			ublk_put_device(ub);
+		}
+		break;
+	case UBLK_CMD_STOP_DEV:
+		ub = ublk_get_device_from_id(header->dev_id);
+		if (ub) {
+			ret = ublk_ctrl_stop_dev(ub);
+			ublk_put_device(ub);
+		}
+		break;
+	case UBLK_CMD_GET_DEV_INFO:
+		ub = ublk_get_device_from_id(header->dev_id);
+		if (ub) {
+			if (copy_to_user(argp, &ub->dev_info, sizeof(info)))
+				ret = -EFAULT;
+			else
+				ret = 0;
+			ublk_put_device(ub);
+		}
+		break;
+	case UBLK_CMD_ADD_DEV:
+		ret = ublk_ctrl_add_dev(&info, argp, header->dev_id);
+		break;
+	case UBLK_CMD_DEL_DEV:
+		ret = ublk_ctrl_del_dev(header->dev_id);
+		break;
+	case UBLK_CMD_GET_QUEUE_AFFINITY:
+		ret = ublk_ctrl_get_queue_affinity(cmd);
+		break;
+	default:
+		break;
+	};
+ out:
+	io_uring_cmd_done(cmd, ret, 0);
+	pr_devel("%s: cmd done ret %d cmd_op %x, dev id %d qid %d\n",
+			__func__, ret, cmd->cmd_op, header->dev_id, header->queue_id);
+	return -EIOCBQUEUED;
+}
+
+static const struct file_operations ublk_ctl_fops = {
+	.open		= nonseekable_open,
+	.uring_cmd      = ublk_ctrl_uring_cmd,
+	.owner		= THIS_MODULE,
+	.llseek		= noop_llseek,
+};
+
+static struct miscdevice ublk_misc = {
+	.minor		= MISC_DYNAMIC_MINOR,
+	.name		= "ublk-control",
+	.fops		= &ublk_ctl_fops,
+};
+
+static int __init ublk_init(void)
+{
+	int ret;
+
+	init_waitqueue_head(&ublk_idr_wq);
+
+	ret = misc_register(&ublk_misc);
+	if (ret)
+		return ret;
+
+	ret = alloc_chrdev_region(&ublk_chr_devt, 0, UBLK_MINORS, "ublk-char");
+	if (ret)
+		goto unregister_mis;
+
+	ublk_chr_class = class_create(THIS_MODULE, "ublk-char");
+	if (IS_ERR(ublk_chr_class)) {
+		ret = PTR_ERR(ublk_chr_class);
+		goto free_chrdev_region;
+	}
+	return 0;
+
+free_chrdev_region:
+	unregister_chrdev_region(ublk_chr_devt, UBLK_MINORS);
+unregister_mis:
+	misc_deregister(&ublk_misc);
+	return ret;
+}
+
+static void __exit ublk_exit(void)
+{
+	struct ublk_device *ub;
+	int id;
+
+	class_destroy(ublk_chr_class);
+
+	misc_deregister(&ublk_misc);
+
+	idr_for_each_entry(&ublk_index_idr, ub, id)
+		ublk_remove(ub);
+
+	idr_destroy(&ublk_index_idr);
+	unregister_chrdev_region(ublk_chr_devt, UBLK_MINORS);
+}
+
+module_init(ublk_init);
+module_exit(ublk_exit);
+
+MODULE_AUTHOR("Ming Lei <ming.lei@redhat.com>");
+MODULE_LICENSE("GPL");
diff --git a/include/uapi/linux/ublk_cmd.h b/include/uapi/linux/ublk_cmd.h
new file mode 100644
index 000000000000..23bf4f4de188
--- /dev/null
+++ b/include/uapi/linux/ublk_cmd.h
@@ -0,0 +1,158 @@ 
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef USER_BLK_DRV_CMD_INC_H
+#define USER_BLK_DRV_CMD_INC_H
+
+#include <linux/types.h>
+
+/* ublk server command definition */
+
+/*
+ * Admin commands, issued by ublk server, and handled by ublk driver.
+ */
+#define	UBLK_CMD_GET_QUEUE_AFFINITY	0x01
+#define	UBLK_CMD_GET_DEV_INFO	0x02
+#define	UBLK_CMD_ADD_DEV		0x04
+#define	UBLK_CMD_DEL_DEV		0x05
+#define	UBLK_CMD_START_DEV	0x06
+#define	UBLK_CMD_STOP_DEV	0x07
+
+/*
+ * IO commands, issued by ublk server, and handled by ublk driver.
+ *
+ * FETCH_REQ: issued via sqe(URING_CMD) beforehand for fetching IO request
+ *      from ublk driver, should be issued only when starting device. After
+ *      the associated cqe is returned, request's tag can be retrieved via
+ *      cqe->userdata.
+ *
+ * COMMIT_AND_FETCH_REQ: issued via sqe(URING_CMD) after ublkserver handled
+ *      this IO request, request's handling result is committed to ublk
+ *      driver, meantime FETCH_REQ is piggyback, and FETCH_REQ has to be
+ *      handled before completing io request.
+ *
+ * COMMIT_REQ: issued via sqe(URING_CMD) after ublkserver handled this IO
+ *      request, request's handling result is committed to ublk driver.
+ */
+#define	UBLK_IO_FETCH_REQ		0x20
+#define	UBLK_IO_COMMIT_AND_FETCH_REQ	0x21
+#define	UBLK_IO_COMMIT_REQ		0x22
+
+/* only ABORT means that no re-fetch */
+#define UBLK_IO_RES_OK			0
+#define UBLK_IO_RES_ABORT		(-ENODEV)
+
+#define UBLKSRV_CMD_BUF_OFFSET	0
+#define UBLKSRV_IO_BUF_OFFSET	0x80000000
+
+/* tag bit is 12bit, so at most 4096 IOs for each queue */
+#define UBLK_MAX_QUEUE_DEPTH	4096
+
+/*
+ * zero copy requires 4k block size, and can remap ublk driver's io
+ * request into ublksrv's vm space
+ */
+#define UBLK_F_SUPPORT_ZERO_COPY	0
+
+/* device state */
+#define UBLK_S_DEV_DEAD	0
+#define UBLK_S_DEV_LIVE	1
+
+/* shipped via sqe->cmd of io_uring command */
+struct ublksrv_ctrl_cmd {
+	/* sent to which device, must be valid */
+	__u32	dev_id;
+
+	/* sent to which queue, must be -1 if the cmd isn't for queue */
+	__u16	queue_id;
+	/*
+	 * cmd specific buffer, can be IN or OUT.
+	 */
+	__u16	len;
+	__u64	addr;
+
+	/* inline data */
+	__u64	data[2];
+};
+
+struct ublksrv_ctrl_dev_info {
+	__u16	nr_hw_queues;
+	__u16	queue_depth;
+	__u16	block_size;
+	__u16	state;
+
+	__u32	rq_max_blocks;
+	__u32	dev_id;
+
+	__u64   dev_blocks;
+
+	__s32	ublksrv_pid;
+	__s32	reserved0;
+	__u64	flags[2];
+
+	__u64	reserved1[10];
+};
+
+#define		UBLK_IO_OP_READ		0
+#define		UBLK_IO_OP_WRITE		1
+#define		UBLK_IO_OP_FLUSH		2
+#define		UBLK_IO_OP_DISCARD	3
+#define		UBLK_IO_OP_WRITE_SAME	4
+#define		UBLK_IO_OP_WRITE_ZEROES	5
+
+#define		UBLK_IO_F_FAILFAST_DEV		(1U << 8)
+#define		UBLK_IO_F_FAILFAST_TRANSPORT	(1U << 9)
+#define		UBLK_IO_F_FAILFAST_DRIVER	(1U << 10)
+#define		UBLK_IO_F_META			(1U << 11)
+#define		UBLK_IO_F_INTEGRITY		(1U << 12)
+#define		UBLK_IO_F_FUA			(1U << 13)
+#define		UBLK_IO_F_PREFLUSH		(1U << 14)
+#define		UBLK_IO_F_NOUNMAP		(1U << 15)
+#define		UBLK_IO_F_SWAP			(1U << 16)
+
+/*
+ * io cmd is described by this structure, and stored in share memory, indexed
+ * by request tag.
+ *
+ * The data is stored by ublk driver, and read by ublksrv after one fetch command
+ * returns.
+ */
+struct ublksrv_io_desc {
+	/* op: bit 0-7, flags: bit 8-31 */
+	__u32		op_flags;
+
+	__u32		nr_sectors;
+
+	/* start sector for this io */
+	__u64		start_sector;
+
+	/* buffer address in ublksrv daemon vm space, from ublk driver */
+	__u64		addr;
+};
+
+static inline __u8 ublksrv_get_op(const struct ublksrv_io_desc *iod)
+{
+	return iod->op_flags & 0xff;
+}
+
+static inline __u32 ublksrv_get_flags(const struct ublksrv_io_desc *iod)
+{
+	return iod->op_flags >> 8;
+}
+
+/* issued to ublk driver via /dev/ublkcN */
+struct ublksrv_io_cmd {
+	__u16	q_id;
+
+	/* for fetch/commit which result */
+	__u16	tag;
+
+	/* io result, it is valid for COMMIT* command only */
+	__s32	result;
+
+	/*
+	 * userspace buffer address in ublksrv daemon process, valid for
+	 * FETCH* command only
+	 */
+	__u64	addr;
+};
+
+#endif