@@ -2786,6 +2786,9 @@
* [no]setxfer: Indicate if transfer speed mode setting
should be skipped.
+ * [no]fua: Disable or enable FUA (Force Unit Access)
+ support for devices supporting this feature.
+
* dump_id: Dump IDENTIFY data.
* disable: Disable this device.
@@ -2422,6 +2422,28 @@ static void ata_dev_config_chs(struct ata_device *dev)
dev->heads, dev->sectors);
}
+static void ata_dev_config_fua(struct ata_device *dev)
+{
+ /* Ignore FUA support if its use is disabled globally */
+ if (!libata_fua)
+ goto nofua;
+
+ /* Ignore devices without support for WRITE DMA FUA EXT */
+ if (!(dev->flags & ATA_DFLAG_LBA48) || !ata_id_has_fua(dev->id))
+ goto nofua;
+
+ /* Ignore known bad devices and devices that lack NCQ support */
+ if (!ata_ncq_supported(dev) || (dev->horkage & ATA_HORKAGE_NO_FUA))
+ goto nofua;
+
+ dev->flags |= ATA_DFLAG_FUA;
+
+ return;
+
+nofua:
+ dev->flags &= ~ATA_DFLAG_FUA;
+}
+
static void ata_dev_config_devslp(struct ata_device *dev)
{
u8 *sata_setting = dev->link->ap->sector_buf;
@@ -2510,7 +2532,8 @@ static void ata_dev_print_features(struct ata_device *dev)
return;
ata_dev_info(dev,
- "Features:%s%s%s%s%s%s\n",
+ "Features:%s%s%s%s%s%s%s\n",
+ dev->flags & ATA_DFLAG_FUA ? " FUA" : "",
dev->flags & ATA_DFLAG_TRUSTED ? " Trust" : "",
dev->flags & ATA_DFLAG_DA ? " Dev-Attention" : "",
dev->flags & ATA_DFLAG_DEVSLP ? " Dev-Sleep" : "",
@@ -2671,6 +2694,7 @@ int ata_dev_configure(struct ata_device *dev)
ata_dev_config_chs(dev);
}
+ ata_dev_config_fua(dev);
ata_dev_config_devslp(dev);
ata_dev_config_sense_reporting(dev);
ata_dev_config_zac(dev);
@@ -4105,6 +4129,9 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = {
*/
{ "SATADOM-ML 3ME", NULL, ATA_HORKAGE_NO_LOG_DIR },
+ /* Buggy FUA */
+ { "Maxtor", "BANC1G10", ATA_HORKAGE_NO_FUA },
+
/* End Marker */
{ }
};
@@ -6216,6 +6243,7 @@ static const struct ata_force_param force_tbl[] __initconst = {
force_horkage_onoff(lpm, ATA_HORKAGE_NOLPM),
force_horkage_onoff(setxfer, ATA_HORKAGE_NOSETXFER),
force_horkage_on(dump_id, ATA_HORKAGE_DUMP_ID),
+ force_horkage_onoff(fua, ATA_HORKAGE_NO_FUA),
force_horkage_on(disable, ATA_HORKAGE_DISABLE),
};
@@ -2240,30 +2240,6 @@ static unsigned int ata_msense_rw_recovery(u8 *buf, bool changeable)
return sizeof(def_rw_recovery_mpage);
}
-/*
- * We can turn this into a real blacklist if it's needed, for now just
- * blacklist any Maxtor BANC1G10 revision firmware
- */
-static int ata_dev_supports_fua(u16 *id)
-{
- unsigned char model[ATA_ID_PROD_LEN + 1], fw[ATA_ID_FW_REV_LEN + 1];
-
- if (!libata_fua)
- return 0;
- if (!ata_id_has_fua(id))
- return 0;
-
- ata_id_c_string(id, model, ATA_ID_PROD, sizeof(model));
- ata_id_c_string(id, fw, ATA_ID_FW_REV, sizeof(fw));
-
- if (strcmp(model, "Maxtor"))
- return 1;
- if (strcmp(fw, "BANC1G10"))
- return 1;
-
- return 0; /* blacklisted */
-}
-
/**
* ata_scsiop_mode_sense - Simulate MODE SENSE 6, 10 commands
* @args: device IDENTIFY data / SCSI command of interest.
@@ -2287,7 +2263,7 @@ static unsigned int ata_scsiop_mode_sense(struct ata_scsi_args *args, u8 *rbuf)
};
u8 pg, spg;
unsigned int ebd, page_control, six_byte;
- u8 dpofua, bp = 0xff;
+ u8 dpofua = 0, bp = 0xff;
u16 fp;
six_byte = (scsicmd[0] == MODE_SENSE);
@@ -2350,9 +2326,7 @@ static unsigned int ata_scsiop_mode_sense(struct ata_scsi_args *args, u8 *rbuf)
goto invalid_fld;
}
- dpofua = 0;
- if (ata_dev_supports_fua(args->id) && (dev->flags & ATA_DFLAG_LBA48) &&
- (!(dev->flags & ATA_DFLAG_PIO) || dev->multi_count))
+ if (dev->flags & ATA_DFLAG_FUA)
dpofua = 1 << 4;
if (six_byte) {
@@ -91,6 +91,7 @@ enum {
ATA_DFLAG_AN = (1 << 7), /* AN configured */
ATA_DFLAG_TRUSTED = (1 << 8), /* device supports trusted send/recv */
ATA_DFLAG_DMADIR = (1 << 10), /* device requires DMADIR */
+ ATA_DFLAG_FUA = (1 << 11), /* device supports FUA */
ATA_DFLAG_CFG_MASK = (1 << 12) - 1,
ATA_DFLAG_PIO = (1 << 12), /* device limited to PIO mode */
@@ -113,9 +114,9 @@ enum {
ATA_DFLAG_D_SENSE = (1 << 29), /* Descriptor sense requested */
ATA_DFLAG_ZAC = (1 << 30), /* ZAC device */
- ATA_DFLAG_FEATURES_MASK = ATA_DFLAG_TRUSTED | ATA_DFLAG_DA | \
- ATA_DFLAG_DEVSLP | ATA_DFLAG_NCQ_SEND_RECV | \
- ATA_DFLAG_NCQ_PRIO,
+ ATA_DFLAG_FEATURES_MASK = (ATA_DFLAG_TRUSTED | ATA_DFLAG_DA | \
+ ATA_DFLAG_DEVSLP | ATA_DFLAG_NCQ_SEND_RECV | \
+ ATA_DFLAG_NCQ_PRIO | ATA_DFLAG_FUA),
ATA_DEV_UNKNOWN = 0, /* unknown device */
ATA_DEV_ATA = 1, /* ATA device */
@@ -381,6 +382,7 @@ enum {
ATA_HORKAGE_NO_NCQ_ON_ATI = (1 << 27), /* Disable NCQ on ATI chipset */
ATA_HORKAGE_NO_ID_DEV_LOG = (1 << 28), /* Identify device log missing */
ATA_HORKAGE_NO_LOG_DIR = (1 << 29), /* Do not read log directory */
+ ATA_HORKAGE_NO_FUA = (1 << 30), /* Do not use FUA */
/* DMA mask for user DMA control: User visible values; DO NOT
renumber */