diff mbox series

[V9,4/8] block, bfq: turn bfqq_data into an array in bfq_io_cq

Message ID 20221208104351.35038-5-paolo.valente@linaro.org (mailing list archive)
State New, archived
Headers show
Series block, bfq: extend bfq to support multi-actuator drives | expand

Commit Message

Paolo Valente Dec. 8, 2022, 10:43 a.m. UTC
When a bfq_queue Q is merged with another queue, several pieces of
information are saved about Q. These pieces are stored in the
bfqq_data field in the bfq_io_cq data structure of the process
associated with Q.

Yet, with a multi-actuator drive, a process may get associated with
multiple bfq_queues: one queue for each of the N actuators. Each of
these queues may undergo a merge. So, the bfq_io_cq data structure
must be able to accommodate the above information for N queues.

This commit solves this problem by turning the bfqq_data scalar field
into an array of N elements (and by changing code so as to handle
this array).

This solution is written under the assumption that bfq_queues
associated with different actuators cannot be cross-merged. This
assumption holds naturally with basic queue merging: the latter is
triggered by spatial locality, and sectors for different actuators are
not close to each other (apart from the corner case of the last
sectors served by a given actuator and the first sectors served by the
next actuator). As for stable cross-merging, the assumption here is
that it is disabled.

Signed-off-by: Gabriele Felici <felicigb@gmail.com>
Signed-off-by: Gianmarco Lusvardi <glusvardi@posteo.net>
Signed-off-by: Giulio Barabino <giuliobarabino99@gmail.com>
Signed-off-by: Emiliano Maccaferri <inbox@emilianomaccaferri.com>
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
---
 block/bfq-iosched.c | 95 +++++++++++++++++++++++++++------------------
 block/bfq-iosched.h | 12 ++++--
 2 files changed, 65 insertions(+), 42 deletions(-)

Comments

Damien Le Moal Dec. 9, 2022, 1:30 a.m. UTC | #1
On 12/8/22 19:43, Paolo Valente wrote:
> When a bfq_queue Q is merged with another queue, several pieces of
> information are saved about Q. These pieces are stored in the
> bfqq_data field in the bfq_io_cq data structure of the process
> associated with Q.
> 
> Yet, with a multi-actuator drive, a process may get associated with
> multiple bfq_queues: one queue for each of the N actuators. Each of
> these queues may undergo a merge. So, the bfq_io_cq data structure
> must be able to accommodate the above information for N queues.
> 
> This commit solves this problem by turning the bfqq_data scalar field
> into an array of N elements (and by changing code so as to handle
> this array).
> 
> This solution is written under the assumption that bfq_queues
> associated with different actuators cannot be cross-merged. This
> assumption holds naturally with basic queue merging: the latter is
> triggered by spatial locality, and sectors for different actuators are
> not close to each other (apart from the corner case of the last
> sectors served by a given actuator and the first sectors served by the
> next actuator). As for stable cross-merging, the assumption here is
> that it is disabled.
> 
> Signed-off-by: Gabriele Felici <felicigb@gmail.com>
> Signed-off-by: Gianmarco Lusvardi <glusvardi@posteo.net>
> Signed-off-by: Giulio Barabino <giuliobarabino99@gmail.com>
> Signed-off-by: Emiliano Maccaferri <inbox@emilianomaccaferri.com>
> Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
> ---
>  block/bfq-iosched.c | 95 +++++++++++++++++++++++++++------------------
>  block/bfq-iosched.h | 12 ++++--
>  2 files changed, 65 insertions(+), 42 deletions(-)
> 
> diff --git a/block/bfq-iosched.c b/block/bfq-iosched.c
> index 0d6b35ef3d3f..18e2b8f75435 100644
> --- a/block/bfq-iosched.c
> +++ b/block/bfq-iosched.c
> @@ -406,7 +406,7 @@ void bic_set_bfqq(struct bfq_io_cq *bic,
>  	 * we cancel the stable merge if
>  	 * bic->stable_merge_bfqq == bfqq.
>  	 */
> -	struct bfq_iocq_bfqq_data *bfqq_data = &bic->bfqq_data;
> +	struct bfq_iocq_bfqq_data *bfqq_data = &bic->bfqq_data[actuator_idx];
>  
>  	if (is_sync)
>  		bic->bfqq[1][actuator_idx] = bfqq;
> @@ -1181,9 +1181,10 @@ static void
>  bfq_bfqq_resume_state(struct bfq_queue *bfqq, struct bfq_data *bfqd,
>  		      struct bfq_io_cq *bic, bool bfq_already_existing)
>  {
> -	struct bfq_iocq_bfqq_data *bfqq_data = &bic->bfqq_data;
>  	unsigned int old_wr_coeff = 1;
>  	bool busy = bfq_already_existing && bfq_bfqq_busy(bfqq);
> +	unsigned int a_idx = bfqq->actuator_idx;
> +	struct bfq_iocq_bfqq_data *bfqq_data = &bic->bfqq_data[a_idx];
>  
>  	if (bfqq_data->saved_has_short_ttime)
>  		bfq_mark_bfqq_has_short_ttime(bfqq);
> @@ -1899,7 +1900,9 @@ static void bfq_bfqq_handle_idle_busy_switch(struct bfq_data *bfqd,
>  	wr_or_deserves_wr = bfqd->low_latency &&
>  		(bfqq->wr_coeff > 1 ||
>  		 (bfq_bfqq_sync(bfqq) &&
> -		  (bfqq->bic || RQ_BIC(rq)->bfqq_data.stably_merged) &&
> +		  (bfqq->bic ||
> +		   RQ_BIC(rq)->bfqq_data[bfq_actuator_index(bfqd, rq->bio)]
> +		   .stably_merged) &&

very weird line split here...

>  		   (*interactive || soft_rt)));
>  
>  	/*
> @@ -2888,6 +2891,35 @@ static bool bfq_may_be_close_cooperator(struct bfq_queue *bfqq,
>  static bool idling_boosts_thr_without_issues(struct bfq_data *bfqd,
>  					     struct bfq_queue *bfqq);
>  
> +static struct bfq_queue *
> +bfq_setup_stable_merge(struct bfq_data *bfqd, struct bfq_queue *bfqq,
> +		       struct bfq_queue *stable_merge_bfqq,
> +		       struct bfq_iocq_bfqq_data *bfqq_data)
> +{
> +	int proc_ref = min(bfqq_process_refs(bfqq),
> +			   bfqq_process_refs(stable_merge_bfqq));
> +
> +	if (!idling_boosts_thr_without_issues(bfqd, bfqq) &&
> +	    proc_ref > 0) {

If you reverse the if condition and return NULL here you can save one tab
indent level for the hunk below (no need for an else after a return).

> +		/* next function will take at least one ref */
> +		struct bfq_queue *new_bfqq =
> +			bfq_setup_merge(bfqq, stable_merge_bfqq);
> +
> +		if (new_bfqq) {
> +			bfqq_data->stably_merged = true;
> +			if (new_bfqq->bic) {
> +				unsigned int new_a_idx = new_bfqq->actuator_idx;
> +				struct bfq_iocq_bfqq_data *new_bfqq_data =
> +					&new_bfqq->bic->bfqq_data[new_a_idx];
> +
> +				new_bfqq_data->stably_merged = true;
> +			}
> +		}
> +		return new_bfqq;
> +	} else
> +		return NULL;
> +}

Otherwise, looks OK.

Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
diff mbox series

Patch

diff --git a/block/bfq-iosched.c b/block/bfq-iosched.c
index 0d6b35ef3d3f..18e2b8f75435 100644
--- a/block/bfq-iosched.c
+++ b/block/bfq-iosched.c
@@ -406,7 +406,7 @@  void bic_set_bfqq(struct bfq_io_cq *bic,
 	 * we cancel the stable merge if
 	 * bic->stable_merge_bfqq == bfqq.
 	 */
-	struct bfq_iocq_bfqq_data *bfqq_data = &bic->bfqq_data;
+	struct bfq_iocq_bfqq_data *bfqq_data = &bic->bfqq_data[actuator_idx];
 
 	if (is_sync)
 		bic->bfqq[1][actuator_idx] = bfqq;
@@ -1181,9 +1181,10 @@  static void
 bfq_bfqq_resume_state(struct bfq_queue *bfqq, struct bfq_data *bfqd,
 		      struct bfq_io_cq *bic, bool bfq_already_existing)
 {
-	struct bfq_iocq_bfqq_data *bfqq_data = &bic->bfqq_data;
 	unsigned int old_wr_coeff = 1;
 	bool busy = bfq_already_existing && bfq_bfqq_busy(bfqq);
+	unsigned int a_idx = bfqq->actuator_idx;
+	struct bfq_iocq_bfqq_data *bfqq_data = &bic->bfqq_data[a_idx];
 
 	if (bfqq_data->saved_has_short_ttime)
 		bfq_mark_bfqq_has_short_ttime(bfqq);
@@ -1899,7 +1900,9 @@  static void bfq_bfqq_handle_idle_busy_switch(struct bfq_data *bfqd,
 	wr_or_deserves_wr = bfqd->low_latency &&
 		(bfqq->wr_coeff > 1 ||
 		 (bfq_bfqq_sync(bfqq) &&
-		  (bfqq->bic || RQ_BIC(rq)->bfqq_data.stably_merged) &&
+		  (bfqq->bic ||
+		   RQ_BIC(rq)->bfqq_data[bfq_actuator_index(bfqd, rq->bio)]
+		   .stably_merged) &&
 		   (*interactive || soft_rt)));
 
 	/*
@@ -2888,6 +2891,35 @@  static bool bfq_may_be_close_cooperator(struct bfq_queue *bfqq,
 static bool idling_boosts_thr_without_issues(struct bfq_data *bfqd,
 					     struct bfq_queue *bfqq);
 
+static struct bfq_queue *
+bfq_setup_stable_merge(struct bfq_data *bfqd, struct bfq_queue *bfqq,
+		       struct bfq_queue *stable_merge_bfqq,
+		       struct bfq_iocq_bfqq_data *bfqq_data)
+{
+	int proc_ref = min(bfqq_process_refs(bfqq),
+			   bfqq_process_refs(stable_merge_bfqq));
+
+	if (!idling_boosts_thr_without_issues(bfqd, bfqq) &&
+	    proc_ref > 0) {
+		/* next function will take at least one ref */
+		struct bfq_queue *new_bfqq =
+			bfq_setup_merge(bfqq, stable_merge_bfqq);
+
+		if (new_bfqq) {
+			bfqq_data->stably_merged = true;
+			if (new_bfqq->bic) {
+				unsigned int new_a_idx = new_bfqq->actuator_idx;
+				struct bfq_iocq_bfqq_data *new_bfqq_data =
+					&new_bfqq->bic->bfqq_data[new_a_idx];
+
+				new_bfqq_data->stably_merged = true;
+			}
+		}
+		return new_bfqq;
+	} else
+		return NULL;
+}
+
 /*
  * Attempt to schedule a merge of bfqq with the currently in-service
  * queue or with a close queue among the scheduled queues.  Return
@@ -2913,7 +2945,8 @@  bfq_setup_cooperator(struct bfq_data *bfqd, struct bfq_queue *bfqq,
 		     void *io_struct, bool request, struct bfq_io_cq *bic)
 {
 	struct bfq_queue *in_service_bfqq, *new_bfqq;
-	struct bfq_iocq_bfqq_data *bfqq_data = &bic->bfqq_data;
+	unsigned int a_idx = bfqq->actuator_idx;
+	struct bfq_iocq_bfqq_data *bfqq_data = &bic->bfqq_data[a_idx];
 
 	/* if a merge has already been setup, then proceed with that first */
 	if (bfqq->new_bfqq)
@@ -2943,29 +2976,15 @@  bfq_setup_cooperator(struct bfq_data *bfqd, struct bfq_queue *bfqq,
 					   msecs_to_jiffies(bfq_late_stable_merging))) {
 			struct bfq_queue *stable_merge_bfqq =
 				bfqq_data->stable_merge_bfqq;
-			int proc_ref = min(bfqq_process_refs(bfqq),
-					   bfqq_process_refs(stable_merge_bfqq));
 
 			/* deschedule stable merge, because done or aborted here */
 			bfq_put_stable_ref(stable_merge_bfqq);
 
 			bfqq_data->stable_merge_bfqq = NULL;
 
-			if (!idling_boosts_thr_without_issues(bfqd, bfqq) &&
-			    proc_ref > 0) {
-				/* next function will take at least one ref */
-				struct bfq_queue *new_bfqq =
-					bfq_setup_merge(bfqq, stable_merge_bfqq);
-
-				if (new_bfqq) {
-					bfqq_data->stably_merged = true;
-					if (new_bfqq->bic)
-						new_bfqq->bic->bfqq_data.stably_merged =
-							true;
-				}
-				return new_bfqq;
-			} else
-				return NULL;
+			return bfq_setup_stable_merge(bfqd, bfqq,
+						      stable_merge_bfqq,
+						      bfqq_data);
 		}
 	}
 
@@ -3060,7 +3079,8 @@  bfq_setup_cooperator(struct bfq_data *bfqd, struct bfq_queue *bfqq,
 static void bfq_bfqq_save_state(struct bfq_queue *bfqq)
 {
 	struct bfq_io_cq *bic = bfqq->bic;
-	struct bfq_iocq_bfqq_data *bfqq_data = &bic->bfqq_data;
+	unsigned int a_idx = bfqq->actuator_idx;
+	struct bfq_iocq_bfqq_data *bfqq_data = &bic->bfqq_data[a_idx];
 
 	/*
 	 * If !bfqq->bic, the queue is already shared or its requests
@@ -3071,7 +3091,7 @@  static void bfq_bfqq_save_state(struct bfq_queue *bfqq)
 		return;
 
 	bfqq_data->saved_last_serv_time_ns = bfqq->last_serv_time_ns;
-	bfqq_data->saved_inject_limit = bfqq->inject_limit;
+	bfqq_data->saved_inject_limit =	bfqq->inject_limit;
 	bfqq_data->saved_decrease_time_jif = bfqq->decrease_time_jif;
 
 	bfqq_data->saved_weight = bfqq->entity.orig_weight;
@@ -5438,7 +5458,7 @@  static void bfq_exit_icq(struct io_cq *icq)
 	 * therefore on its unused per-actuator fields being NULL.
 	 */
 	unsigned int num_actuators = BFQ_MAX_ACTUATORS;
-	struct bfq_iocq_bfqq_data *bfqq_data = &bic->bfqq_data;
+	struct bfq_iocq_bfqq_data *bfqq_data = bic->bfqq_data;
 
 	/*
 	 * bfqd is NULL if scheduler already exited, and in that case
@@ -5449,10 +5469,10 @@  static void bfq_exit_icq(struct io_cq *icq)
 		num_actuators = bfqd->num_actuators;
 	}
 
-	if (bfqq_data->stable_merge_bfqq)
-		bfq_put_stable_ref(bfqq_data->stable_merge_bfqq);
-
 	for (act_idx = 0; act_idx < num_actuators; act_idx++) {
+		if (bfqq_data[act_idx].stable_merge_bfqq)
+			bfq_put_stable_ref(bfqq_data[act_idx].stable_merge_bfqq);
+
 		bfq_exit_icq_bfqq(bic, true, act_idx);
 		bfq_exit_icq_bfqq(bic, false, act_idx);
 	}
@@ -5639,16 +5659,16 @@  bfq_do_early_stable_merge(struct bfq_data *bfqd, struct bfq_queue *bfqq,
 			  struct bfq_io_cq *bic,
 			  struct bfq_queue *last_bfqq_created)
 {
+	unsigned int a_idx = last_bfqq_created->actuator_idx;
 	struct bfq_queue *new_bfqq =
 		bfq_setup_merge(bfqq, last_bfqq_created);
-	struct bfq_iocq_bfqq_data *bfqq_data = &bic->bfqq_data;
 
 	if (!new_bfqq)
 		return bfqq;
 
 	if (new_bfqq->bic)
-		new_bfqq->bic->bfqq_data.stably_merged = true;
-	bfqq_data->stably_merged = true;
+		new_bfqq->bic->bfqq_data[a_idx].stably_merged = true;
+	bic->bfqq_data[a_idx].stably_merged = true;
 
 	/*
 	 * Reusing merge functions. This implies that
@@ -5717,7 +5737,6 @@  static struct bfq_queue *bfq_do_or_sched_stable_merge(struct bfq_data *bfqd,
 		&bfqd->last_bfqq_created;
 
 	struct bfq_queue *last_bfqq_created = *source_bfqq;
-	struct bfq_iocq_bfqq_data *bfqq_data = &bic->bfqq_data;
 
 	/*
 	 * If last_bfqq_created has not been set yet, then init it. If
@@ -5779,7 +5798,8 @@  static struct bfq_queue *bfq_do_or_sched_stable_merge(struct bfq_data *bfqd,
 			/*
 			 * Record the bfqq to merge to.
 			 */
-			bfqq_data->stable_merge_bfqq = last_bfqq_created;
+			bic->bfqq_data[last_bfqq_created->actuator_idx].stable_merge_bfqq =
+				last_bfqq_created;
 		}
 	}
 
@@ -6699,7 +6719,7 @@  static struct bfq_queue *bfq_get_bfqq_handle_split(struct bfq_data *bfqd,
 {
 	unsigned int act_idx = bfq_actuator_index(bfqd, bio);
 	struct bfq_queue *bfqq = bic_to_bfqq(bic, is_sync, act_idx);
-	struct bfq_iocq_bfqq_data *bfqq_data = &bic->bfqq_data;
+	struct bfq_iocq_bfqq_data *bfqq_data = &bic->bfqq_data[act_idx];
 
 	if (likely(bfqq && bfqq != &bfqd->oom_bfqq))
 		return bfqq;
@@ -6807,7 +6827,7 @@  static struct bfq_queue *bfq_init_rq(struct request *rq)
 	struct bfq_queue *bfqq;
 	bool new_queue = false;
 	bool bfqq_already_existing = false, split = false;
-	struct bfq_iocq_bfqq_data *bfqq_data;
+	unsigned int a_idx = bfq_actuator_index(bfqd, bio);
 
 	if (unlikely(!rq->elv.icq))
 		return NULL;
@@ -6831,17 +6851,16 @@  static struct bfq_queue *bfq_init_rq(struct request *rq)
 	bfqq = bfq_get_bfqq_handle_split(bfqd, bic, bio, false, is_sync,
 					 &new_queue);
 
-	bfqq_data = &bic->bfqq_data;
-
 	if (likely(!new_queue)) {
 		/* If the queue was seeky for too long, break it apart. */
 		if (bfq_bfqq_coop(bfqq) && bfq_bfqq_split_coop(bfqq) &&
-			!bfqq_data->stably_merged) {
+			!bic->bfqq_data[a_idx].stably_merged) {
 			struct bfq_queue *old_bfqq = bfqq;
 
 			/* Update bic before losing reference to bfqq */
 			if (bfq_bfqq_in_large_burst(bfqq))
-				bfqq_data->saved_in_large_burst = true;
+				bic->bfqq_data[a_idx].saved_in_large_burst =
+					true;
 
 			bfqq = bfq_split_bfqq(bic, bfqq);
 			split = true;
diff --git a/block/bfq-iosched.h b/block/bfq-iosched.h
index 9d77d964620f..a685aa32b037 100644
--- a/block/bfq-iosched.h
+++ b/block/bfq-iosched.h
@@ -416,7 +416,7 @@  struct bfq_queue {
 struct bfq_iocq_bfqq_data {
 	/*
 	 * Snapshot of the has_short_time flag before merging; taken
-	 * to remember its value while the queue is merged, so as to
+	 * to remember its values while the queue is merged, so as to
 	 * be able to restore it in case of split.
 	 */
 	bool saved_has_short_ttime;
@@ -430,7 +430,7 @@  struct bfq_iocq_bfqq_data {
 	u64 saved_tot_idle_time;
 
 	/*
-	 * Same purpose as the previous fields for the value of the
+	 * Same purpose as the previous fields for the values of the
 	 * field keeping the queue's belonging to a large burst
 	 */
 	bool saved_in_large_burst;
@@ -493,8 +493,12 @@  struct bfq_io_cq {
 	uint64_t blkcg_serial_nr; /* the current blkcg serial */
 #endif
 
-	/* persistent data for associated synchronous process queue */
-	struct bfq_iocq_bfqq_data bfqq_data;
+	/*
+	 * Persistent data for associated synchronous process queues
+	 * (one queue per actuator, see field bfqq above). In
+	 * particular, each of these queues may undergo a merge.
+	 */
+	struct bfq_iocq_bfqq_data bfqq_data[BFQ_MAX_ACTUATORS];
 
 	unsigned int requests;	/* Number of requests this process has in flight */
 };