diff mbox series

[v6,7/7] scsi: ufs: Disable zone write locking

Message ID 20230804154821.3232094-8-bvanassche@acm.org (mailing list archive)
State New, archived
Headers show
Series Improve performance for zoned UFS devices | expand

Commit Message

Bart Van Assche Aug. 4, 2023, 3:48 p.m. UTC
From the UFSHCI 4.0 specification, about the legacy (single queue) mode:
"The host controller always process transfer requests in-order according
to the order submitted to the list. In case of multiple commands with
single doorbell register ringing (batch mode), The dispatch order for
these transfer requests by host controller will base on their index in
the List. A transfer request with lower index value will be executed
before a transfer request with higher index value."

From the UFSHCI 4.0 specification, about the MCQ mode:
"Command Submission
1. Host SW writes an Entry to SQ
2. Host SW updates SQ doorbell tail pointer

Command Processing
3. After fetching the Entry, Host Controller updates SQ doorbell head
   pointer
4. Host controller sends COMMAND UPIU to UFS device"

In other words, for both legacy and MCQ mode, UFS controllers are
required to forward commands to the UFS device in the order these
commands have been received from the host.

Notes:
- For legacy mode this is only correct if the host submits one
  command at a time. The UFS driver does this.
- Also in legacy mode, the command order is not preserved if
  auto-hibernation is enabled in the UFS controller. Hence, enable
  zone write locking if auto-hibernation is enabled.

This patch improves performance as follows on my test setup:
- With the mq-deadline scheduler: 2.5x more IOPS for small writes.
- When not using an I/O scheduler compared to using mq-deadline with
  zone locking: 4x more IOPS for small writes.

Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Avri Altman <avri.altman@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Damien Le Moal <dlemoal@kernel.org>
Cc: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
---
 drivers/ufs/core/ufshcd.c | 40 ++++++++++++++++++++++++++++++++++++++-
 1 file changed, 39 insertions(+), 1 deletion(-)

Comments

Can Guo Aug. 7, 2023, 9:11 a.m. UTC | #1
On 8/4/2023 11:48 PM, Bart Van Assche wrote:
>  From the UFSHCI 4.0 specification, about the legacy (single queue) mode:
> "The host controller always process transfer requests in-order according
> to the order submitted to the list. In case of multiple commands with
> single doorbell register ringing (batch mode), The dispatch order for
> these transfer requests by host controller will base on their index in
> the List. A transfer request with lower index value will be executed
> before a transfer request with higher index value."
>
>  From the UFSHCI 4.0 specification, about the MCQ mode:
> "Command Submission
> 1. Host SW writes an Entry to SQ
> 2. Host SW updates SQ doorbell tail pointer
>
> Command Processing
> 3. After fetching the Entry, Host Controller updates SQ doorbell head
>     pointer
> 4. Host controller sends COMMAND UPIU to UFS device"
>
> In other words, for both legacy and MCQ mode, UFS controllers are
> required to forward commands to the UFS device in the order these
> commands have been received from the host.
>
> Notes:
> - For legacy mode this is only correct if the host submits one
>    command at a time. The UFS driver does this.
> - Also in legacy mode, the command order is not preserved if
>    auto-hibernation is enabled in the UFS controller. Hence, enable
>    zone write locking if auto-hibernation is enabled.
>
> This patch improves performance as follows on my test setup:
> - With the mq-deadline scheduler: 2.5x more IOPS for small writes.
> - When not using an I/O scheduler compared to using mq-deadline with
>    zone locking: 4x more IOPS for small writes.
>
> Cc: Martin K. Petersen <martin.petersen@oracle.com>
> Cc: Avri Altman <avri.altman@wdc.com>
> Cc: Christoph Hellwig <hch@lst.de>
> Cc: Damien Le Moal <dlemoal@kernel.org>
> Cc: Ming Lei <ming.lei@redhat.com>
> Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Can Guo <quic_cang@quicinc.com>
diff mbox series

Patch

diff --git a/drivers/ufs/core/ufshcd.c b/drivers/ufs/core/ufshcd.c
index ae7b868f9c26..3c99516c38fa 100644
--- a/drivers/ufs/core/ufshcd.c
+++ b/drivers/ufs/core/ufshcd.c
@@ -4337,23 +4337,53 @@  int ufshcd_uic_hibern8_exit(struct ufs_hba *hba)
 }
 EXPORT_SYMBOL_GPL(ufshcd_uic_hibern8_exit);
 
+static void ufshcd_update_no_zone_write_lock(struct ufs_hba *hba,
+					     bool set_no_zone_write_lock)
+{
+	struct scsi_device *sdev;
+
+	shost_for_each_device(sdev, hba->host)
+		blk_freeze_queue_start(sdev->request_queue);
+	shost_for_each_device(sdev, hba->host) {
+		struct request_queue *q = sdev->request_queue;
+
+		blk_mq_freeze_queue_wait(q);
+		if (set_no_zone_write_lock)
+			blk_queue_flag_set(QUEUE_FLAG_NO_ZONE_WRITE_LOCK, q);
+		else
+			blk_queue_flag_clear(QUEUE_FLAG_NO_ZONE_WRITE_LOCK, q);
+		blk_mq_unfreeze_queue(q);
+	}
+}
+
 void ufshcd_auto_hibern8_update(struct ufs_hba *hba, u32 ahit)
 {
 	unsigned long flags;
-	bool update = false;
+	bool prev_state, new_state, update = false;
 
 	if (!ufshcd_is_auto_hibern8_supported(hba))
 		return;
 
 	spin_lock_irqsave(hba->host->host_lock, flags);
+	prev_state = ufshcd_is_auto_hibern8_enabled(hba);
 	if (hba->ahit != ahit) {
 		hba->ahit = ahit;
 		update = true;
 	}
+	new_state = ufshcd_is_auto_hibern8_enabled(hba);
 	spin_unlock_irqrestore(hba->host->host_lock, flags);
 
 	if (!update)
 		return;
+	if (!is_mcq_enabled(hba) && !prev_state && new_state) {
+		/*
+		 * Auto-hibernation will be enabled. Enable write locking for
+		 * zoned writes since auto-hibernation may cause reordering of
+		 * zoned writes when using the legacy mode of the UFS host
+		 * controller.
+		 */
+		ufshcd_update_no_zone_write_lock(hba, false);
+	}
 	if (!pm_runtime_suspended(&hba->ufs_device_wlun->sdev_gendev)) {
 		ufshcd_rpm_get_sync(hba);
 		ufshcd_hold(hba);
@@ -4361,6 +4391,13 @@  void ufshcd_auto_hibern8_update(struct ufs_hba *hba, u32 ahit)
 		ufshcd_release(hba);
 		ufshcd_rpm_put_sync(hba);
 	}
+	if (!is_mcq_enabled(hba) && prev_state && !new_state) {
+		/*
+		 * Auto-hibernation has been disabled. Disable write locking
+		 * for zoned writes.
+		 */
+		ufshcd_update_no_zone_write_lock(hba, true);
+	}
 }
 EXPORT_SYMBOL_GPL(ufshcd_auto_hibern8_update);
 
@@ -5140,6 +5177,7 @@  static int ufshcd_slave_configure(struct scsi_device *sdev)
 
 	ufshcd_hpb_configure(hba, sdev);
 
+	blk_queue_flag_set(QUEUE_FLAG_NO_ZONE_WRITE_LOCK, q);
 	blk_queue_update_dma_pad(q, PRDT_DATA_BYTE_COUNT_PAD - 1);
 	if (hba->quirks & UFSHCD_QUIRK_4KB_DMA_ALIGNMENT)
 		blk_queue_update_dma_alignment(q, SZ_4K - 1);