@@ -7666,10 +7666,65 @@ static int only_parity(int raid_disk, int algo, int raid_disks, int max_degraded
return 0;
}
-static void raid5_set_io_opt(struct r5conf *conf)
+static int raid5_set_limits(struct mddev *mddev)
{
- blk_queue_io_opt(conf->mddev->queue, (conf->chunk_sectors << 9) *
- (conf->raid_disks - conf->max_degraded));
+ struct r5conf *conf = mddev->private;
+ struct queue_limits lim;
+ int data_disks, stripe;
+ struct md_rdev *rdev;
+
+ /*
+ * The read-ahead size must cover two whole stripes, which is
+ * 2 * (datadisks) * chunksize where 'n' is the number of raid devices.
+ */
+ data_disks = conf->previous_raid_disks - conf->max_degraded;
+
+ /*
+ * We can only discard a whole stripe. It doesn't make sense to
+ * discard data disk but write parity disk
+ */
+ stripe = roundup_pow_of_two(data_disks * (mddev->chunk_sectors << 9));
+
+ blk_set_stacking_limits(&lim);
+ lim.io_min = mddev->chunk_sectors << 9;
+ lim.io_opt = lim.io_min * (conf->raid_disks - conf->max_degraded);
+ lim.raid_partial_stripes_expensive = 1;
+ lim.discard_granularity = stripe;
+ lim.max_write_zeroes_sectors = 0;
+ mddev_stack_rdev_limits(mddev, &lim);
+ rdev_for_each(rdev, mddev)
+ queue_limits_stack_bdev(&lim, rdev->bdev, rdev->new_data_offset,
+ mddev->gendisk->disk_name);
+
+ /*
+ * Zeroing is required for discard, otherwise data could be lost.
+ *
+ * Consider a scenario: discard a stripe (the stripe could be
+ * inconsistent if discard_zeroes_data is 0); write one disk of the
+ * stripe (the stripe could be inconsistent again depending on which
+ * disks are used to calculate parity); the disk is broken; The stripe
+ * data of this disk is lost.
+ *
+ * We only allow DISCARD if the sysadmin has confirmed that only safe
+ * devices are in use by setting a module parameter. A better idea
+ * might be to turn DISCARD into WRITE_ZEROES requests, as that is
+ * required to be safe.
+ */
+ if (!devices_handle_discard_safely ||
+ lim.max_discard_sectors < (stripe >> 9) ||
+ lim.discard_granularity < stripe)
+ lim.max_hw_discard_sectors = 0;
+
+ /*
+ * Requests require having a bitmap for each stripe.
+ * Limit the max sectors based on this.
+ */
+ lim.max_hw_sectors = RAID5_MAX_REQ_STRIPES << RAID5_STRIPE_SHIFT(conf);
+
+ /* No restrictions on the number of segments in the request */
+ lim.max_segments = USHRT_MAX;
+
+ return queue_limits_set(mddev->queue, &lim);
}
static int raid5_run(struct mddev *mddev)
@@ -7682,6 +7737,7 @@ static int raid5_run(struct mddev *mddev)
int i;
long long min_offset_diff = 0;
int first = 1;
+ int ret = -EIO;
if (mddev->recovery_cp != MaxSector)
pr_notice("md/raid:%s: not clean -- starting background reconstruction\n",
@@ -7935,65 +7991,9 @@ static int raid5_run(struct mddev *mddev)
md_set_array_sectors(mddev, raid5_size(mddev, 0, 0));
if (!mddev_is_dm(mddev)) {
- int chunk_size;
- /* read-ahead size must cover two whole stripes, which
- * is 2 * (datadisks) * chunksize where 'n' is the
- * number of raid devices
- */
- int data_disks = conf->previous_raid_disks - conf->max_degraded;
- int stripe = data_disks *
- ((mddev->chunk_sectors << 9) / PAGE_SIZE);
-
- chunk_size = mddev->chunk_sectors << 9;
- blk_queue_io_min(mddev->queue, chunk_size);
- raid5_set_io_opt(conf);
- mddev->queue->limits.raid_partial_stripes_expensive = 1;
- /*
- * We can only discard a whole stripe. It doesn't make sense to
- * discard data disk but write parity disk
- */
- stripe = stripe * PAGE_SIZE;
- stripe = roundup_pow_of_two(stripe);
- mddev->queue->limits.discard_granularity = stripe;
-
- blk_queue_max_write_zeroes_sectors(mddev->queue, 0);
-
- rdev_for_each(rdev, mddev) {
- disk_stack_limits(mddev->gendisk, rdev->bdev,
- rdev->data_offset << 9);
- disk_stack_limits(mddev->gendisk, rdev->bdev,
- rdev->new_data_offset << 9);
- }
-
- /*
- * zeroing is required, otherwise data
- * could be lost. Consider a scenario: discard a stripe
- * (the stripe could be inconsistent if
- * discard_zeroes_data is 0); write one disk of the
- * stripe (the stripe could be inconsistent again
- * depending on which disks are used to calculate
- * parity); the disk is broken; The stripe data of this
- * disk is lost.
- *
- * We only allow DISCARD if the sysadmin has confirmed that
- * only safe devices are in use by setting a module parameter.
- * A better idea might be to turn DISCARD into WRITE_ZEROES
- * requests, as that is required to be safe.
- */
- if (!devices_handle_discard_safely ||
- mddev->queue->limits.max_discard_sectors < (stripe >> 9) ||
- mddev->queue->limits.discard_granularity < stripe)
- blk_queue_max_discard_sectors(mddev->queue, 0);
-
- /*
- * Requests require having a bitmap for each stripe.
- * Limit the max sectors based on this.
- */
- blk_queue_max_hw_sectors(mddev->queue,
- RAID5_MAX_REQ_STRIPES << RAID5_STRIPE_SHIFT(conf));
-
- /* No restrictions on the number of segments in the request */
- blk_queue_max_segments(mddev->queue, USHRT_MAX);
+ ret = raid5_set_limits(mddev);
+ if (ret)
+ goto abort;
}
if (log_init(conf, journal_dev, raid5_has_ppl(conf)))
@@ -8006,7 +8006,7 @@ static int raid5_run(struct mddev *mddev)
free_conf(conf);
mddev->private = NULL;
pr_warn("md/raid:%s: failed to run raid set.\n", mdname(mddev));
- return -EIO;
+ return ret;
}
static void raid5_free(struct mddev *mddev, void *priv)
@@ -8538,8 +8538,8 @@ static void end_reshape(struct r5conf *conf)
spin_unlock_irq(&conf->device_lock);
wake_up(&conf->wait_for_overlap);
- if (!mddev_is_dm(conf->mddev))
- raid5_set_io_opt(conf);
+ mddev_update_io_opt(conf->mddev,
+ conf->raid_disks - conf->max_degraded);
}
}