diff mbox series

[v20,07/12] nvme: add copy offload support

Message ID 20240520102033.9361-8-nj.shetty@samsung.com (mailing list archive)
State New, archived
Headers show
Series [v20,01/12] block: Introduce queue limits and sysfs for copy-offload support | expand

Commit Message

Nitesh Shetty May 20, 2024, 10:20 a.m. UTC
Current design only supports single source range.
We receive a request with REQ_OP_COPY_DST.
Parse this request which consists of dst(1st) and src(2nd) bios.
Form a copy command (TP 4065)

trace event support for nvme_copy_cmd.
Set the device copy limits to queue limits.

Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Kanchan Joshi <joshi.k@samsung.com>
Signed-off-by: Nitesh Shetty <nj.shetty@samsung.com>
Signed-off-by: Javier González <javier.gonz@samsung.com>
Signed-off-by: Anuj Gupta <anuj20.g@samsung.com>
---
 drivers/nvme/host/constants.c |  1 +
 drivers/nvme/host/core.c      | 81 ++++++++++++++++++++++++++++++++++-
 drivers/nvme/host/trace.c     | 19 ++++++++
 include/linux/blkdev.h        |  1 +
 include/linux/nvme.h          | 43 +++++++++++++++++--
 5 files changed, 141 insertions(+), 4 deletions(-)

Comments

Christoph Hellwig June 1, 2024, 6:22 a.m. UTC | #1
On Mon, May 20, 2024 at 03:50:20PM +0530, Nitesh Shetty wrote:
> +	if (blk_rq_nr_phys_segments(req) != BLK_COPY_MAX_SEGMENTS)
> +		return BLK_STS_IOERR;

This sounds like BLK_COPY_MAX_SEGMENTS is misnamed.  Right now this is
not a max segments, but the exact number of segments required.

>  /*
>   * Recommended frequency for KATO commands per NVMe 1.4 section 7.12.1:
> - * 
> + *

Please submit this whitespace fix separately.

> diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
> index 8b1edb46880a..1c5974bb23d5 100644
> --- a/include/linux/blkdev.h
> +++ b/include/linux/blkdev.h
> @@ -1287,6 +1287,7 @@ static inline unsigned int bdev_discard_granularity(struct block_device *bdev)
>  
>  /* maximum copy offload length, this is set to 128MB based on current testing */
>  #define BLK_COPY_MAX_BYTES		(1 << 27)
> +#define BLK_COPY_MAX_SEGMENTS		2

... and this doesn't belong into a NVMe patch.  I'd also expect that
the block layer would verify this before sending of the request to the driver.

> diff --git a/include/linux/nvme.h b/include/linux/nvme.h
> index 425573202295..5275a0962a02 100644
> --- a/include/linux/nvme.h
> +++ b/include/linux/nvme.h

Note that we've usually kept adding new protocol bits to nvme.h separate
from the implementation in the host or target code.
Nitesh Shetty June 3, 2024, 11:43 a.m. UTC | #2
On 01/06/24 08:22AM, Christoph Hellwig wrote:
>On Mon, May 20, 2024 at 03:50:20PM +0530, Nitesh Shetty wrote:
>> +	if (blk_rq_nr_phys_segments(req) != BLK_COPY_MAX_SEGMENTS)
>> +		return BLK_STS_IOERR;
>
>This sounds like BLK_COPY_MAX_SEGMENTS is misnamed.  Right now this is
>not a max segments, but the exact number of segments required.
>
We will move this check to block layer, with name
BLK_COPY_TOTAL_SEGMENTS.

>>  /*
>>   * Recommended frequency for KATO commands per NVMe 1.4 section 7.12.1:
>> - *
>> + *
>
>Please submit this whitespace fix separately.
>
>> diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
>> index 8b1edb46880a..1c5974bb23d5 100644
>> --- a/include/linux/blkdev.h
>> +++ b/include/linux/blkdev.h
>> @@ -1287,6 +1287,7 @@ static inline unsigned int bdev_discard_granularity(struct block_device *bdev)
>>
>>  /* maximum copy offload length, this is set to 128MB based on current testing */
>>  #define BLK_COPY_MAX_BYTES		(1 << 27)
>> +#define BLK_COPY_MAX_SEGMENTS		2
>
>... and this doesn't belong into a NVMe patch.  I'd also expect that
>the block layer would verify this before sending of the request to the driver.
>
Acked

>> diff --git a/include/linux/nvme.h b/include/linux/nvme.h
>> index 425573202295..5275a0962a02 100644
>> --- a/include/linux/nvme.h
>> +++ b/include/linux/nvme.h
>
>Note that we've usually kept adding new protocol bits to nvme.h separate
>from the implementation in the host or target code.
>
Acked, will move it to a separate patch.

Thank you,
Nitesh Shetty
diff mbox series

Patch

diff --git a/drivers/nvme/host/constants.c b/drivers/nvme/host/constants.c
index 6f2ebb5fcdb0..01b02e76e070 100644
--- a/drivers/nvme/host/constants.c
+++ b/drivers/nvme/host/constants.c
@@ -19,6 +19,7 @@  static const char * const nvme_ops[] = {
 	[nvme_cmd_resv_report] = "Reservation Report",
 	[nvme_cmd_resv_acquire] = "Reservation Acquire",
 	[nvme_cmd_resv_release] = "Reservation Release",
+	[nvme_cmd_copy] = "Copy Offload",
 	[nvme_cmd_zone_mgmt_send] = "Zone Management Send",
 	[nvme_cmd_zone_mgmt_recv] = "Zone Management Receive",
 	[nvme_cmd_zone_append] = "Zone Append",
diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c
index 954f850f113a..238905f9fff6 100644
--- a/drivers/nvme/host/core.c
+++ b/drivers/nvme/host/core.c
@@ -795,6 +795,66 @@  static inline void nvme_setup_flush(struct nvme_ns *ns,
 	cmnd->common.nsid = cpu_to_le32(ns->head->ns_id);
 }
 
+static inline blk_status_t nvme_setup_copy_offload(struct nvme_ns *ns,
+						   struct request *req,
+						   struct nvme_command *cmnd)
+{
+	struct nvme_copy_range *range = NULL;
+	struct bio *bio;
+	u64 dst_lba = 0, src_lba = 0, n_lba = 0;
+	u16 nr_range = 1, control = 0, seg = 1;
+
+	if (blk_rq_nr_phys_segments(req) != BLK_COPY_MAX_SEGMENTS)
+		return BLK_STS_IOERR;
+
+	/*
+	 * First bio contains information about destination and last bio
+	 * contains information about source.
+	 */
+	__rq_for_each_bio(bio, req) {
+		if (seg == blk_rq_nr_phys_segments(req)) {
+			src_lba = nvme_sect_to_lba(ns->head,
+							bio->bi_iter.bi_sector);
+			if (n_lba !=
+				bio->bi_iter.bi_size >> ns->head->lba_shift)
+				return BLK_STS_IOERR;
+		} else {
+			dst_lba = nvme_sect_to_lba(ns->head,
+							bio->bi_iter.bi_sector);
+			n_lba = bio->bi_iter.bi_size >> ns->head->lba_shift;
+		}
+		seg++;
+	}
+
+	if (req->cmd_flags & REQ_FUA)
+		control |= NVME_RW_FUA;
+
+	if (req->cmd_flags & REQ_FAILFAST_DEV)
+		control |= NVME_RW_LR;
+
+	memset(cmnd, 0, sizeof(*cmnd));
+	cmnd->copy.opcode = nvme_cmd_copy;
+	cmnd->copy.nsid = cpu_to_le32(ns->head->ns_id);
+	cmnd->copy.control = cpu_to_le16(control);
+	cmnd->copy.sdlba = cpu_to_le64(dst_lba);
+	cmnd->copy.nr_range = 0;
+
+	range = kmalloc_array(nr_range, sizeof(*range),
+			      GFP_ATOMIC | __GFP_NOWARN);
+	if (!range)
+		return BLK_STS_RESOURCE;
+
+	range[0].slba = cpu_to_le64(src_lba);
+	range[0].nlb = cpu_to_le16(n_lba - 1);
+
+	req->special_vec.bv_page = virt_to_page(range);
+	req->special_vec.bv_offset = offset_in_page(range);
+	req->special_vec.bv_len = sizeof(*range) * nr_range;
+	req->rq_flags |= RQF_SPECIAL_PAYLOAD;
+
+	return BLK_STS_OK;
+}
+
 static blk_status_t nvme_setup_discard(struct nvme_ns *ns, struct request *req,
 		struct nvme_command *cmnd)
 {
@@ -1041,6 +1101,11 @@  blk_status_t nvme_setup_cmd(struct nvme_ns *ns, struct request *req)
 	case REQ_OP_ZONE_APPEND:
 		ret = nvme_setup_rw(ns, req, cmd, nvme_cmd_zone_append);
 		break;
+	case REQ_OP_COPY_DST:
+		ret = nvme_setup_copy_offload(ns, req, cmd);
+		break;
+	case REQ_OP_COPY_SRC:
+		return BLK_STS_IOERR;
 	default:
 		WARN_ON_ONCE(1);
 		return BLK_STS_IOERR;
@@ -1218,7 +1283,7 @@  EXPORT_SYMBOL_NS_GPL(nvme_passthru_end, NVME_TARGET_PASSTHRU);
 
 /*
  * Recommended frequency for KATO commands per NVMe 1.4 section 7.12.1:
- * 
+ *
  *   The host should send Keep Alive commands at half of the Keep Alive Timeout
  *   accounting for transport roundtrip times [..].
  */
@@ -1802,6 +1867,18 @@  static void nvme_config_discard(struct nvme_ns *ns, struct queue_limits *lim)
 		lim->max_discard_segments = NVME_DSM_MAX_RANGES;
 }
 
+static void nvme_config_copy(struct nvme_ns *ns, struct nvme_id_ns *id,
+			     struct queue_limits *lim)
+{
+	struct nvme_ctrl *ctrl = ns->ctrl;
+
+	if (ctrl->oncs & NVME_CTRL_ONCS_COPY)
+		lim->max_copy_hw_sectors =
+			nvme_lba_to_sect(ns->head, id->mssrl);
+	else
+		lim->max_copy_hw_sectors = 0;
+}
+
 static bool nvme_ns_ids_equal(struct nvme_ns_ids *a, struct nvme_ns_ids *b)
 {
 	return uuid_equal(&a->uuid, &b->uuid) &&
@@ -2098,6 +2175,7 @@  static int nvme_update_ns_info_block(struct nvme_ns *ns,
 	if (!nvme_update_disk_info(ns, id, &lim))
 		capacity = 0;
 	nvme_config_discard(ns, &lim);
+	nvme_config_copy(ns, id, &lim);
 	if (IS_ENABLED(CONFIG_BLK_DEV_ZONED) &&
 	    ns->head->ids.csi == NVME_CSI_ZNS)
 		nvme_update_zone_info(ns, &lim, &zi);
@@ -4833,6 +4911,7 @@  static inline void _nvme_check_size(void)
 	BUILD_BUG_ON(sizeof(struct nvme_download_firmware) != 64);
 	BUILD_BUG_ON(sizeof(struct nvme_format_cmd) != 64);
 	BUILD_BUG_ON(sizeof(struct nvme_dsm_cmd) != 64);
+	BUILD_BUG_ON(sizeof(struct nvme_copy_command) != 64);
 	BUILD_BUG_ON(sizeof(struct nvme_write_zeroes_cmd) != 64);
 	BUILD_BUG_ON(sizeof(struct nvme_abort_cmd) != 64);
 	BUILD_BUG_ON(sizeof(struct nvme_get_log_page_command) != 64);
diff --git a/drivers/nvme/host/trace.c b/drivers/nvme/host/trace.c
index 0288315f0050..dfc97fff886b 100644
--- a/drivers/nvme/host/trace.c
+++ b/drivers/nvme/host/trace.c
@@ -153,6 +153,23 @@  static const char *nvme_trace_read_write(struct trace_seq *p, u8 *cdw10)
 	return ret;
 }
 
+static const char *nvme_trace_copy(struct trace_seq *p, u8 *cdw10)
+{
+	const char *ret = trace_seq_buffer_ptr(p);
+	u64 sdlba = get_unaligned_le64(cdw10);
+	u8 nr_range = get_unaligned_le16(cdw10 + 8);
+	u16 control = get_unaligned_le16(cdw10 + 10);
+	u32 dsmgmt = get_unaligned_le32(cdw10 + 12);
+	u32 reftag = get_unaligned_le32(cdw10 + 16);
+
+	trace_seq_printf(p,
+		"sdlba=%llu, nr_range=%u, ctrl=0x%x, dsmgmt=%u, reftag=%u",
+		sdlba, nr_range, control, dsmgmt, reftag);
+	trace_seq_putc(p, 0);
+
+	return ret;
+}
+
 static const char *nvme_trace_dsm(struct trace_seq *p, u8 *cdw10)
 {
 	const char *ret = trace_seq_buffer_ptr(p);
@@ -340,6 +357,8 @@  const char *nvme_trace_parse_nvm_cmd(struct trace_seq *p,
 		return nvme_trace_resv_rel(p, cdw10);
 	case nvme_cmd_resv_report:
 		return nvme_trace_resv_report(p, cdw10);
+	case nvme_cmd_copy:
+		return nvme_trace_copy(p, cdw10);
 	default:
 		return nvme_trace_common(p, cdw10);
 	}
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index 8b1edb46880a..1c5974bb23d5 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -1287,6 +1287,7 @@  static inline unsigned int bdev_discard_granularity(struct block_device *bdev)
 
 /* maximum copy offload length, this is set to 128MB based on current testing */
 #define BLK_COPY_MAX_BYTES		(1 << 27)
+#define BLK_COPY_MAX_SEGMENTS		2
 
 static inline unsigned int bdev_max_copy_sectors(struct block_device *bdev)
 {
diff --git a/include/linux/nvme.h b/include/linux/nvme.h
index 425573202295..5275a0962a02 100644
--- a/include/linux/nvme.h
+++ b/include/linux/nvme.h
@@ -341,7 +341,7 @@  struct nvme_id_ctrl {
 	__u8			nvscc;
 	__u8			nwpc;
 	__le16			acwu;
-	__u8			rsvd534[2];
+	__le16			ocfs;
 	__le32			sgls;
 	__le32			mnan;
 	__u8			rsvd544[224];
@@ -369,6 +369,7 @@  enum {
 	NVME_CTRL_ONCS_WRITE_ZEROES		= 1 << 3,
 	NVME_CTRL_ONCS_RESERVATIONS		= 1 << 5,
 	NVME_CTRL_ONCS_TIMESTAMP		= 1 << 6,
+	NVME_CTRL_ONCS_COPY			= 1 << 8,
 	NVME_CTRL_VWC_PRESENT			= 1 << 0,
 	NVME_CTRL_OACS_SEC_SUPP                 = 1 << 0,
 	NVME_CTRL_OACS_NS_MNGT_SUPP		= 1 << 3,
@@ -418,7 +419,10 @@  struct nvme_id_ns {
 	__le16			npdg;
 	__le16			npda;
 	__le16			nows;
-	__u8			rsvd74[18];
+	__le16			mssrl;
+	__le32			mcl;
+	__u8			msrc;
+	__u8			rsvd91[11];
 	__le32			anagrpid;
 	__u8			rsvd96[3];
 	__u8			nsattr;
@@ -830,6 +834,7 @@  enum nvme_opcode {
 	nvme_cmd_resv_report	= 0x0e,
 	nvme_cmd_resv_acquire	= 0x11,
 	nvme_cmd_resv_release	= 0x15,
+	nvme_cmd_copy		= 0x19,
 	nvme_cmd_zone_mgmt_send	= 0x79,
 	nvme_cmd_zone_mgmt_recv	= 0x7a,
 	nvme_cmd_zone_append	= 0x7d,
@@ -853,7 +858,8 @@  enum nvme_opcode {
 		nvme_opcode_name(nvme_cmd_resv_release),	\
 		nvme_opcode_name(nvme_cmd_zone_mgmt_send),	\
 		nvme_opcode_name(nvme_cmd_zone_mgmt_recv),	\
-		nvme_opcode_name(nvme_cmd_zone_append))
+		nvme_opcode_name(nvme_cmd_zone_append),		\
+		nvme_opcode_name(nvme_cmd_copy))
 
 
 
@@ -1030,6 +1036,36 @@  struct nvme_dsm_range {
 	__le64			slba;
 };
 
+struct nvme_copy_command {
+	__u8			opcode;
+	__u8			flags;
+	__u16			command_id;
+	__le32			nsid;
+	__u64			rsvd2;
+	__le64			metadata;
+	union nvme_data_ptr	dptr;
+	__le64			sdlba;
+	__u8			nr_range;
+	__u8			rsvd12;
+	__le16			control;
+	__le16			rsvd13;
+	__le16			dspec;
+	__le32			ilbrt;
+	__le16			lbat;
+	__le16			lbatm;
+};
+
+struct nvme_copy_range {
+	__le64			rsvd0;
+	__le64			slba;
+	__le16			nlb;
+	__le16			rsvd18;
+	__le32			rsvd20;
+	__le32			eilbrt;
+	__le16			elbat;
+	__le16			elbatm;
+};
+
 struct nvme_write_zeroes_cmd {
 	__u8			opcode;
 	__u8			flags;
@@ -1794,6 +1830,7 @@  struct nvme_command {
 		struct nvme_download_firmware dlfw;
 		struct nvme_format_cmd format;
 		struct nvme_dsm_cmd dsm;
+		struct nvme_copy_command copy;
 		struct nvme_write_zeroes_cmd write_zeroes;
 		struct nvme_zone_mgmt_send_cmd zms;
 		struct nvme_zone_mgmt_recv_cmd zmr;