new file mode 100755
@@ -0,0 +1,309 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-3.0+
+# Copyright (C) 2024 Western Digital Corporation or its affiliates.
+#
+# Test DM zone resource limits stacking (max open zones and max active zones
+# limits). The limits shall follow these rules:
+# 1) For a target mapping an entire zoned block device, the limits for the
+# target are set to the limits of the device.
+# 2) For a target partially mapping a zoned block device, the number of
+# mapped sequential zones is used to determine the limits: if the
+# target maps more sequential write required zones than the device
+# limits, then the limits of the device are used as-is. If the number
+# of mapped sequential zones is lower than the limits, then we assume
+# that the target has no limits (limits set to 0).
+# As this evaluation is done for each target, the zone resource limits
+# for the mapped device are evaluated as the non-zero minimum of the
+# limits of all the targets.
+
+. tests/zbd/rc
+
+DESCRIPTION="DM zone resource limits stacking"
+QUICK=1
+
+requires() {
+ _have_kver 6 11
+ _have_driver dm-mod
+ _have_driver dm-crypt
+ _have_program dmsetup
+ _have_program cryptsetup
+}
+
+# setup_dm: <map_type> <zoned device> <start zone> [nr zones]>
+# Create a DM device using dm-linear, dm-error or dm-crypt.
+# If <nr_zones> is omitted, then all zones from <start zone> are mapped.
+setup_dm() {
+ local type devpath dname nrz mapzstart mapnrz zsz maplen mapoffset
+ local keyfile="$TMPDIR/keyfile"
+
+ type="$1"
+ devpath="$2"
+ dname="${devpath##*/}"
+ nrz=$(<"/sys/block/${dname}/queue/nr_zones")
+
+ mapzstart="$3"
+ if [ $# == 3 ]; then
+ mapnrz=$((nrz - mapzstart))
+ else
+ mapnrz="$4"
+ if ((mapnrz == 0)) || (( mapzstart + mapnrz > nrz )); then
+ mapnrz=$((nrz - mapzstart))
+ fi
+ fi
+
+ zsz=$(<"/sys/block/${dname}/queue/chunk_sectors")
+ maplen=$((mapnrz * zsz))
+ mapoffset=$((mapzstart * zsz))
+
+ case "$type" in
+ linear|error)
+ if echo "0 ${maplen} ${type} ${devpath} ${mapoffset}" | \
+ dmsetup create "zbd_011-${type}"; then
+ echo "zbd_011-${type}"
+ fi
+ ;;
+ crypt)
+ # Generate a key (4096-bits)
+ dd if=/dev/random of="$keyfile" bs=1 count=512 &> /dev/null
+ if cryptsetup open --type plain --cipher null --key-size 512 \
+ --key-file "$keyfile" --size ${maplen} \
+ --offset ${mapoffset} "${devpath}" \
+ "zbd_011-crypt"; then
+ echo "zbd_011-crypt"
+ fi
+ ;;
+ esac
+}
+
+# setup_concat: <zoned dev0> <start_zone0> <nr zones0> <zoned dev1> <start_zone1> <nr zones1>
+# Use dm-linear to concatenate 2 sets of zones into a zoned block device.
+# If <nr_zonesX> is 0, then all zones from <start_zoneX> are mapped.
+setup_concat() {
+ local dev0 dname0 nrz0 mapzstart0 mapnrz0
+ local dev1 dname1 nrz1 mapzstart1 mapnrz1
+
+ dev0="$(realpath "$1")"
+ dname0="$(basename "${dev0}")"
+
+ dev1="$(realpath "$4")"
+ dname1="$(basename "${dev1}")"
+
+ nrz0=$(< "/sys/block/${dname0}/queue/nr_zones")
+ mapzstart0=$2
+ if ((mapzstart0 >= nrz0)); then
+ echo "Invalid start zone ${mapzstart0} / ${nrz0}"
+ exit 1
+ fi
+
+ mapnrz0=$3
+ if ((mapnrz0 == 0 || mapzstart0 + mapnrz0 > nrz0)); then
+ mapnrz0=$((nrz0 - mapzstart0))
+ fi
+
+ nrz1=$(< "/sys/block/${dname1}/queue/nr_zones")
+ mapzstart1=$5
+ if ((mapzstart1 >= nrz1)); then
+ echo "Invalid start zone ${mapzstart1} / ${nrz1}"
+ return 1
+ fi
+
+ mapnrz1=$6
+ if ((mapnrz1 == 0 || mapzstart1 + mapnrz1 > nrz1)); then
+ mapnrz1=$((nrz1 - mapzstart1))
+ fi
+
+ zsz=$(< "/sys/block/${dname0}/queue/chunk_sectors")
+ maplen0=$((mapnrz0 * zsz))
+ mapofst0=$((mapzstart0 * zsz))
+ maplen1=$((mapnrz1 * zsz))
+ mapofst1=$((mapzstart1 * zsz))
+
+ # Linear table entries: "start length linear device offset"
+ # start: starting block in virtual device
+ # length: length of this segment
+ # device: block device, referenced by the device name or by major:minor
+ # offset: starting offset of the mapping on the device
+
+ if echo -e "0 ${maplen0} linear /dev/${dname0} ${mapofst0}\n" \
+ "${maplen0} ${maplen1} linear /dev/${dname1} ${mapofst1}" | \
+ dmsetup create "zbd_011-concat"; then
+ echo "zbd_011-concat"
+ fi
+}
+
+# check_limits: <dev> <zoned model> <number of zones> <max open limit> <max active limit>
+# Check that the zoned model, number of zones and zone resource limits of a DM
+# device match the values of the arguments passed.
+check_limits() {
+ local ret=0
+ local devpath dname sysqueue model nrz moz maz
+
+ devpath=$(realpath "$1")
+ sysqueue="/sys/block/${devpath##*/}/queue"
+ model="$(< "${sysqueue}/zoned")"
+
+ if [[ "$model" != "$2" ]]; then
+ echo "Invalid zoned model: ${model} should be $2"
+ return 1
+ fi
+
+ nrz=$(< "${sysqueue}/nr_zones")
+ if [[ ${nrz} -ne $3 ]]; then
+ echo "Invalid number of zones: ${nrz} should be $3"
+ ret=1
+ fi
+
+ # Non-zoned block devices do not have max_open_zones and
+ # max_active_zones sysfs attributes.
+ [[ "$2" == "none" ]] && return $ret
+
+ moz=$(< "${sysqueue}/max_open_zones")
+ if [[ ${moz} -ne $4 ]]; then
+ echo "Invalid max open zones limit: ${moz} should be $4"
+ ret=1
+ fi
+
+ maz=$(< "${sysqueue}/max_active_zones")
+ if [[ ${maz} -ne $5 ]]; then
+ echo "Invalid max active zones limit: ${maz} should be $5"
+ ret=1
+ fi
+
+ return $ret
+}
+
+declare -a TEST_DESCRIPTIONS
+declare -a SETUP_COMMANDS
+declare -a EXPECTED_LIMITS
+
+# Test 1
+TEST_DESCRIPTIONS+=("Map all zones of the 1st nullb")
+SETUP_COMMANDS+=("setup_dm linear /dev/nullb_zbd_011_1 0")
+EXPECTED_LIMITS+=("host-managed 1152 64 64")
+
+# Test 2
+TEST_DESCRIPTIONS+=("Map all zones of the 2nd nullb")
+SETUP_COMMANDS+=("setup_dm linear /dev/nullb_zbd_011_2 0")
+EXPECTED_LIMITS+=("host-managed 512 48 0")
+
+# Test 3
+TEST_DESCRIPTIONS+=("Map all CNV zones of the 1st nullb")
+SETUP_COMMANDS+=("setup_dm linear /dev/nullb_zbd_011_1 0 128")
+EXPECTED_LIMITS+=("none 0 0 0")
+
+# Test 4
+TEST_DESCRIPTIONS+=("Map all SWR zones of the 1st nullb")
+SETUP_COMMANDS+=("setup_dm linear /dev/nullb_zbd_011_1 128")
+EXPECTED_LIMITS+=("host-managed 1024 64 64")
+
+# Test 5
+TEST_DESCRIPTIONS+=("Map 32 SWR zones of the 1st nullb")
+SETUP_COMMANDS+=("setup_dm linear /dev/nullb_zbd_011_1 128 32")
+EXPECTED_LIMITS+=("host-managed 32 0 0")
+
+# Test 6
+TEST_DESCRIPTIONS+=("Map 64 SWR zones of the 1st nullb")
+SETUP_COMMANDS+=("setup_dm linear /dev/nullb_zbd_011_1 128 64")
+EXPECTED_LIMITS+=("host-managed 64 0 0")
+
+# Test 7
+TEST_DESCRIPTIONS+=("Map 128 SWR zones of the 1st nullb")
+SETUP_COMMANDS+=("setup_dm linear /dev/nullb_zbd_011_1 128 128")
+EXPECTED_LIMITS+=("host-managed 128 64 64")
+
+# Test 8
+TEST_DESCRIPTIONS+=("Concatenate all zones of the 1st and 2nd nullb")
+SETUP_COMMANDS+=("setup_concat /dev/nullb_zbd_011_1 0 0 /dev/nullb_zbd_011_2 0 0")
+EXPECTED_LIMITS+=("host-managed 1664 48 64")
+
+# Test 9
+TEST_DESCRIPTIONS+=("Map 32 CNV zones of the 1st nullb and all SWR zones of the 2nd nullb")
+SETUP_COMMANDS+=("setup_concat /dev/nullb_zbd_011_1 0 32 /dev/nullb_zbd_011_2 0 0")
+EXPECTED_LIMITS+=("host-managed 544 48 0")
+
+# Test 10
+TEST_DESCRIPTIONS+=("Map all SWR zones of the 1st nullb and all SWR zones of the 2nd nullb")
+SETUP_COMMANDS+=("setup_concat /dev/nullb_zbd_011_1 128 0 /dev/nullb_zbd_011_2 0 0")
+EXPECTED_LIMITS+=("host-managed 1536 48 64")
+
+# Test 11
+TEST_DESCRIPTIONS+=("Map 32 SWR zones of the 1st nullb and all SWR zones of the 2nd nullb")
+SETUP_COMMANDS+=("setup_concat /dev/nullb_zbd_011_1 128 32 /dev/nullb_zbd_011_2 0 0")
+EXPECTED_LIMITS+=("host-managed 544 48 0")
+
+# Test 12
+TEST_DESCRIPTIONS+=("Map 128 SWR zones of the 1st nullb and 16 SWR zones of the 2nd nullb")
+SETUP_COMMANDS+=("setup_concat /dev/nullb_zbd_011_1 128 128 /dev/nullb_zbd_011_2 0 16")
+EXPECTED_LIMITS+=("host-managed 144 64 64")
+
+# Test 13
+TEST_DESCRIPTIONS+=("Map 32 SWR zones of the 1st nullb and 16 SWR zones of the 2nd nullb")
+SETUP_COMMANDS+=("setup_concat /dev/nullb_zbd_011_1 128 32 /dev/nullb_zbd_011_2 0 16")
+EXPECTED_LIMITS+=("host-managed 48 0 0")
+
+# Test 14
+TEST_DESCRIPTIONS+=("Map 32 SWR zones of the 1st nullb and 48 SWR zones of the 2nd nullb")
+SETUP_COMMANDS+=("setup_concat /dev/nullb_zbd_011_1 128 32 /dev/nullb_zbd_011_2 0 48")
+EXPECTED_LIMITS+=("host-managed 80 0 0")
+
+# Test 15
+TEST_DESCRIPTIONS+=("Map 32 SWR zones of the 1st nullb and 64 SWR zones of the 2nd nullb")
+SETUP_COMMANDS+=("setup_concat /dev/nullb_zbd_011_1 128 32 /dev/nullb_zbd_011_2 0 64")
+EXPECTED_LIMITS+=("host-managed 96 48 0")
+
+# Test 16
+TEST_DESCRIPTIONS+=("Insert dm-error on the 1st nullb")
+SETUP_COMMANDS+=("setup_dm error /dev/nullb_zbd_011_1 0")
+EXPECTED_LIMITS+=("host-managed 1152 64 64")
+
+# Test 17
+TEST_DESCRIPTIONS+=("Map all zones of the 1st nullb with dm-crypt")
+SETUP_COMMANDS+=("setup_dm crypt /dev/nullb_zbd_011_1 0")
+EXPECTED_LIMITS+=("host-managed 1152 64 64")
+
+# Test 18
+TEST_DESCRIPTIONS+=("Map all CNV zones of the 1st nullb with dm-crypt")
+SETUP_COMMANDS+=("setup_dm crypt /dev/nullb_zbd_011_1 0 128")
+EXPECTED_LIMITS+=("none 0 0 0")
+
+# Test 19
+TEST_DESCRIPTIONS+=("Map all CNV zones and 128 SWR zones of the 1st nullb with dm-crypt")
+SETUP_COMMANDS+=("setup_dm crypt /dev/nullb_zbd_011_1 0 256")
+EXPECTED_LIMITS+=("host-managed 256 64 64")
+
+# Test 20
+TEST_DESCRIPTIONS+=("Map 64 SWR zones of the 1st nullb with dm-crypt")
+SETUP_COMMANDS+=("setup_dm crypt /dev/nullb_zbd_011_1 128 64")
+EXPECTED_LIMITS+=("host-managed 64 0 0")
+
+# Test 21
+TEST_DESCRIPTIONS+=("Map all SWR zones of the 2nd nullb with dm-crypt")
+SETUP_COMMANDS+=("setup_dm crypt /dev/nullb_zbd_011_2 0")
+EXPECTED_LIMITS+=("host-managed 512 48 0")
+
+test() {
+ local i dm_name check_cmd
+
+ echo "Running ${TEST_NAME}"
+
+ _configure_null_blk nullb_zbd_011_1 size=2304 zoned=1 \
+ zone_size=2 zone_nr_conv=128 \
+ zone_max_open=64 zone_max_active=64 power=1
+ _configure_null_blk nullb_zbd_011_2 size=1024 zoned=1 \
+ zone_size=2 zone_nr_conv=0 \
+ zone_max_open=48 zone_max_active=0 power=1
+
+ for ((i = 0; i < ${#TEST_DESCRIPTIONS[@]}; i++)); do
+ dm_name=$(eval "${SETUP_COMMANDS[i]}")
+ check_cmd="check_limits /dev/mapper/$dm_name"
+ check_cmd+=" ${EXPECTED_LIMITS[i]}"
+ if ! eval "$check_cmd"; then
+ echo "Test $((i + 1)) failed: ${TEST_DESCRIPTIONS[i]}"
+ fi
+ dmsetup remove "$dm_name"
+ done
+
+ _exit_null_blk
+
+ echo "Test complete"
+}
new file mode 100644
@@ -0,0 +1,2 @@
+Running zbd/011
+Test complete
Since the kernel commit 73a74af0c72b ("dm: Improve zone resource limits handling"), zone resource limits (max open zones and max active zones) are propagated from target zoned devices to mapped devices. As the kernel commit message describes, the resource limit propagation shall follow the two rules below based on the number of sequential zones mapped by the targets: 1) For a target mapping an entire zoned block device, the limits for the target are set to the limits of the device. 2) For a target partially mapping a zoned block device, the number of mapped sequential zones is used to determine the limits: if the target maps more sequential write required zones than the device limits, then the limits of the device are used as-is. If the number of mapped sequential zones is lower than the limits, then we assume that the target has no limits (limits set to 0). Add a new test case to confirm that the resource limit propagation follows the rules. Prepare two zoned null_blk devices with different set ups: number of conventional zones, different max open zones and max active zones limits. Create variations of DMs using the null_blk devices and check if the max open zones and the max active zones have expected values. Suggested-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Signed-off-by: Damien Le Moal <dlemoal@kernel.org> --- tests/zbd/011 | 309 ++++++++++++++++++++++++++++++++++++++++++++++ tests/zbd/011.out | 2 + 2 files changed, 311 insertions(+) create mode 100755 tests/zbd/011 create mode 100644 tests/zbd/011.out