@@ -39,7 +39,12 @@ enum opal_response_token {
#define FIRST_TPER_SESSION_NUM 4096
#define TPER_SYNC_SUPPORTED 0x01
+/* FC_LOCKING features */
+#define LOCKING_SUPPORTED_MASK 0x01
+#define LOCKING_ENABLED_MASK 0x02
+#define LOCKED_MASK 0x04
#define MBR_ENABLED_MASK 0x10
+#define MBR_DONE_MASK 0x20
#define TINY_ATOM_DATA_MASK 0x3F
#define TINY_ATOM_SIGNED 0x40
@@ -74,8 +74,7 @@ struct parsed_resp {
};
struct opal_dev {
- bool supported;
- bool mbr_enabled;
+ u32 flags;
void *data;
sec_send_recv *send_recv;
@@ -280,6 +279,30 @@ static bool check_tper(const void *data)
return true;
}
+static bool check_lcksuppt(const void *data)
+{
+ const struct d0_locking_features *lfeat = data;
+ u8 sup_feat = lfeat->supported_features;
+
+ return !!(sup_feat & LOCKING_SUPPORTED_MASK);
+}
+
+static bool check_lckenabled(const void *data)
+{
+ const struct d0_locking_features *lfeat = data;
+ u8 sup_feat = lfeat->supported_features;
+
+ return !!(sup_feat & LOCKING_ENABLED_MASK);
+}
+
+static bool check_locked(const void *data)
+{
+ const struct d0_locking_features *lfeat = data;
+ u8 sup_feat = lfeat->supported_features;
+
+ return !!(sup_feat & LOCKED_MASK);
+}
+
static bool check_mbrenabled(const void *data)
{
const struct d0_locking_features *lfeat = data;
@@ -288,6 +311,14 @@ static bool check_mbrenabled(const void *data)
return !!(sup_feat & MBR_ENABLED_MASK);
}
+static bool check_mbrdone(const void *data)
+{
+ const struct d0_locking_features *lfeat = data;
+ u8 sup_feat = lfeat->supported_features;
+
+ return !!(sup_feat & MBR_DONE_MASK);
+}
+
static bool check_sum(const void *data)
{
const struct d0_single_user_mode *sum = data;
@@ -435,7 +466,7 @@ static int opal_discovery0_end(struct opal_dev *dev)
u32 hlen = be32_to_cpu(hdr->length);
print_buffer(dev->resp, hlen);
- dev->mbr_enabled = false;
+ dev->flags &= OPAL_FL_SUPPORTED;
if (hlen > IO_BUFFER_LENGTH - sizeof(*hdr)) {
pr_debug("Discovery length overflows buffer (%zu+%u)/%u\n",
@@ -461,7 +492,16 @@ static int opal_discovery0_end(struct opal_dev *dev)
check_geometry(dev, body);
break;
case FC_LOCKING:
- dev->mbr_enabled = check_mbrenabled(body->features);
+ if (check_lcksuppt(body->features))
+ dev->flags |= OPAL_FL_LOCKING_SUPPORTED;
+ if (check_lckenabled(body->features))
+ dev->flags |= OPAL_FL_LOCKING_ENABLED;
+ if (check_locked(body->features))
+ dev->flags |= OPAL_FL_LOCKED;
+ if (check_mbrenabled(body->features))
+ dev->flags |= OPAL_FL_MBR_ENABLED;
+ if (check_mbrdone(body->features))
+ dev->flags |= OPAL_FL_MBR_DONE;
break;
case FC_ENTERPRISE:
case FC_DATASTORE:
@@ -2109,7 +2149,8 @@ static int check_opal_support(struct opal_dev *dev)
mutex_lock(&dev->dev_lock);
setup_opal_dev(dev);
ret = opal_discovery0_step(dev);
- dev->supported = !ret;
+ if (!ret)
+ dev->flags |= OPAL_FL_SUPPORTED;
mutex_unlock(&dev->dev_lock);
return ret;
@@ -2148,6 +2189,7 @@ struct opal_dev *init_opal_dev(void *data, sec_send_recv *send_recv)
INIT_LIST_HEAD(&dev->unlk_lst);
mutex_init(&dev->dev_lock);
+ dev->flags = 0;
dev->data = data;
dev->send_recv = send_recv;
if (check_opal_support(dev) != 0) {
@@ -2528,7 +2570,7 @@ bool opal_unlock_from_suspend(struct opal_dev *dev)
if (!dev)
return false;
- if (!dev->supported)
+ if (!(dev->flags & OPAL_FL_SUPPORTED))
return false;
mutex_lock(&dev->dev_lock);
@@ -2546,7 +2588,7 @@ bool opal_unlock_from_suspend(struct opal_dev *dev)
was_failure = true;
}
- if (dev->mbr_enabled) {
+ if (dev->flags & OPAL_FL_MBR_ENABLED) {
ret = __opal_set_mbr_done(dev, &suspend->unlk.session.opal_key);
if (ret)
pr_debug("Failed to set MBR Done in S3 resume\n");
@@ -2620,6 +2662,24 @@ static int opal_generic_read_write_table(struct opal_dev *dev,
return ret;
}
+static int opal_get_status(struct opal_dev *dev, void __user *data)
+{
+ struct opal_status sts = {0};
+
+ /*
+ * check_opal_support() error is not fatal,
+ * !dev->supported is a valid condition
+ */
+ if (!check_opal_support(dev)) {
+ sts.flags = dev->flags;
+ }
+ if (copy_to_user(data, &sts, sizeof(sts))) {
+ pr_debug("Error copying status to userspace\n");
+ return -EFAULT;
+ }
+ return 0;
+}
+
int sed_ioctl(struct opal_dev *dev, unsigned int cmd, void __user *arg)
{
void *p;
@@ -2629,12 +2689,14 @@ int sed_ioctl(struct opal_dev *dev, unsigned int cmd, void __user *arg)
return -EACCES;
if (!dev)
return -ENOTSUPP;
- if (!dev->supported)
+ if (!(dev->flags & OPAL_FL_SUPPORTED))
return -ENOTSUPP;
- p = memdup_user(arg, _IOC_SIZE(cmd));
- if (IS_ERR(p))
- return PTR_ERR(p);
+ if (cmd & IOC_IN) {
+ p = memdup_user(arg, _IOC_SIZE(cmd));
+ if (IS_ERR(p))
+ return PTR_ERR(p);
+ }
switch (cmd) {
case IOC_OPAL_SAVE:
@@ -2685,11 +2747,15 @@ int sed_ioctl(struct opal_dev *dev, unsigned int cmd, void __user *arg)
case IOC_OPAL_GENERIC_TABLE_RW:
ret = opal_generic_read_write_table(dev, p);
break;
+ case IOC_OPAL_GET_STATUS:
+ ret = opal_get_status(dev, arg);
+ break;
default:
break;
}
- kfree(p);
+ if (cmd & IOC_IN)
+ kfree(p);
return ret;
}
EXPORT_SYMBOL_GPL(sed_ioctl);
@@ -43,6 +43,7 @@ static inline bool is_sed_ioctl(unsigned int cmd)
case IOC_OPAL_MBR_DONE:
case IOC_OPAL_WRITE_SHADOW_MBR:
case IOC_OPAL_GENERIC_TABLE_RW:
+ case IOC_OPAL_GET_STATUS:
return true;
}
return false;
@@ -132,6 +132,17 @@ struct opal_read_write_table {
__u64 priv;
};
+#define OPAL_FL_SUPPORTED 0x00000001
+#define OPAL_FL_LOCKING_SUPPORTED 0x00000002
+#define OPAL_FL_LOCKING_ENABLED 0x00000004
+#define OPAL_FL_LOCKED 0x00000008
+#define OPAL_FL_MBR_ENABLED 0x00000010
+#define OPAL_FL_MBR_DONE 0x00000020
+
+struct opal_status {
+ __u32 flags;
+};
+
#define IOC_OPAL_SAVE _IOW('p', 220, struct opal_lock_unlock)
#define IOC_OPAL_LOCK_UNLOCK _IOW('p', 221, struct opal_lock_unlock)
#define IOC_OPAL_TAKE_OWNERSHIP _IOW('p', 222, struct opal_key)
@@ -148,5 +159,6 @@ struct opal_read_write_table {
#define IOC_OPAL_MBR_DONE _IOW('p', 233, struct opal_mbr_done)
#define IOC_OPAL_WRITE_SHADOW_MBR _IOW('p', 234, struct opal_shadow_mbr)
#define IOC_OPAL_GENERIC_TABLE_RW _IOW('p', 235, struct opal_read_write_table)
+#define IOC_OPAL_GET_STATUS _IOR('p', 236, struct opal_status)
#endif /* _UAPI_SED_OPAL_H */
Provide a mechanism to retrieve basic status information about the device, including the "supported" flag indicating whether SED-OPAL is supported. The information returned is from the various feature descriptors received during the discovery0 step, and so this ioctl does nothing more than perform the discovery0 step and then save the information received. See "struct opal_status" and OPAL_FL_* bits for the status information currently returned. Signed-off-by: Douglas Miller <dougmill@linux.vnet.ibm.com> --- kernel/block/opal_proto.h | 5 ++ kernel/block/sed-opal.c | 90 ++++++++++++++++++++++++---- kernel/include/linux/sed-opal.h | 1 + kernel/include/uapi/linux/sed-opal.h | 12 ++++ 4 files changed, 96 insertions(+), 12 deletions(-)