[V6] brd: check and limit max_part par

Commit Message

Zhiqiang Liu Feb. 4, 2020, 11:30 a.m. UTC

In brd_init func, rd_nr num of brd_device are firstly allocated
and add in brd_devices, then brd_devices are traversed to add each
brd_device by calling add_disk func. When allocating brd_device,
the disk->first_minor is set to i * max_part, if rd_nr * max_part
is larger than MINORMASK, two different brd_device may have the same
devt, then only one of them can be successfully added.
when rmmod brd.ko, it will cause oops when calling brd_exit.

Follow those steps:
  # modprobe brd rd_nr=3 rd_size=102400 max_part=1048576
  # rmmod brd
then, the oops will appear.

Oops log:
[  726.613722] Call trace:
[  726.614175]  kernfs_find_ns+0x24/0x130
[  726.614852]  kernfs_find_and_get_ns+0x44/0x68
[  726.615749]  sysfs_remove_group+0x38/0xb0
[  726.616520]  blk_trace_remove_sysfs+0x1c/0x28
[  726.617320]  blk_unregister_queue+0x98/0x100
[  726.618105]  del_gendisk+0x144/0x2b8
[  726.618759]  brd_exit+0x68/0x560 [brd]
[  726.619501]  __arm64_sys_delete_module+0x19c/0x2a0
[  726.620384]  el0_svc_common+0x78/0x130
[  726.621057]  el0_svc_handler+0x38/0x78
[  726.621738]  el0_svc+0x8/0xc
[  726.622259] Code: aa0203f6 aa0103f7 aa1e03e0 d503201f (7940e260)

Here, we add brd_check_and_reset_par func to check and limit max_part par.

--
V5->V6:
 - remove useless code

V4->V5:(suggested by Ming Lei)
 - make sure max_part is not larger than DISK_MAX_PARTS

V3->V4:(suggested by Ming Lei)
 - remove useless change
 - add one limit of max_part

V2->V3: (suggested by Ming Lei)
 - clear .minors when running out of consecutive minor space in brd_alloc
 - remove limit of rd_nr

V1->V2:
 - add more checks in brd_check_par_valid as suggested by Ming Lei.

Signed-off-by: Zhiqiang Liu <[e-mail]>
Reviewed-by: Bob Liu <[e-mail]>
Reviewed-by: Ming Lei <[e-mail]>
---
 drivers/block/brd.c | 22 ++++++++++++++++++++--
 1 file changed, 20 insertions(+), 2 deletions(-)

Comments

Jens Axboe Feb. 4, 2020, 2:19 p.m. UTC | #1

On 2/4/20 4:30 AM, Zhiqiang Liu wrote:
> In brd_init func, rd_nr num of brd_device are firstly allocated
> and add in brd_devices, then brd_devices are traversed to add each
> brd_device by calling add_disk func. When allocating brd_device,
> the disk->first_minor is set to i * max_part, if rd_nr * max_part
> is larger than MINORMASK, two different brd_device may have the same
> devt, then only one of them can be successfully added.
> when rmmod brd.ko, it will cause oops when calling brd_exit.
> 
> Follow those steps:
>   # modprobe brd rd_nr=3 rd_size=102400 max_part=1048576
>   # rmmod brd
> then, the oops will appear.
> 
> Oops log:
> [  726.613722] Call trace:
> [  726.614175]  kernfs_find_ns+0x24/0x130
> [  726.614852]  kernfs_find_and_get_ns+0x44/0x68
> [  726.615749]  sysfs_remove_group+0x38/0xb0
> [  726.616520]  blk_trace_remove_sysfs+0x1c/0x28
> [  726.617320]  blk_unregister_queue+0x98/0x100
> [  726.618105]  del_gendisk+0x144/0x2b8
> [  726.618759]  brd_exit+0x68/0x560 [brd]
> [  726.619501]  __arm64_sys_delete_module+0x19c/0x2a0
> [  726.620384]  el0_svc_common+0x78/0x130
> [  726.621057]  el0_svc_handler+0x38/0x78
> [  726.621738]  el0_svc+0x8/0xc
> [  726.622259] Code: aa0203f6 aa0103f7 aa1e03e0 d503201f (7940e260)
> 
> Here, we add brd_check_and_reset_par func to check and limit max_part par.

Applied, thanks.

Patch

diff --git a/drivers/block/brd.c b/drivers/block/brd.c
index df8103dd40ac..d31e77864e22 100644
--- a/drivers/block/brd.c
+++ b/drivers/block/brd.c
@@ -468,6 +468,25 @@  static struct kobject *brd_probe(dev_t dev, int *part, void *data)
 	return kobj;
 }

+static inline void brd_check_and_reset_par(void)
+{
+	if (unlikely(!max_part))
+		max_part = 1;
+
+	/*
+	 * make sure 'max_part' can be divided exactly by (1U << MINORBITS),
+	 * otherwise, it is possiable to get same dev_t when adding partitions.
+	 */
+	if ((1U << MINORBITS) % max_part != 0)
+		max_part = 1UL << fls(max_part);
+
+	if (max_part > DISK_MAX_PARTS) {
+		pr_info("brd: max_part can't be larger than %d, reset max_part = %d.\n",
+			DISK_MAX_PARTS, DISK_MAX_PARTS);
+		max_part = DISK_MAX_PARTS;
+	}
+}
+
 static int __init brd_init(void)
 {
 	struct brd_device *brd, *next;
@@ -491,8 +510,7 @@  static int __init brd_init(void)
 	if (register_blkdev(RAMDISK_MAJOR, "ramdisk"))
 		return -EIO;

-	if (unlikely(!max_part))
-		max_part = 1;
+	brd_check_and_reset_par();

 	for (i = 0; i < rd_nr; i++) {
 		brd = brd_alloc(i);