@@ -195,83 +195,28 @@ static int create_raid_groups(struct btrfs_trans_handle *trans,
int metadata_profile_opt, int mixed, int ssd)
{
u64 num_devices = btrfs_super_num_devices(root->fs_info->super_copy);
- u64 allowed = 0;
- u64 devices_for_raid = num_devices;
int ret;
- /*
- * Set default profiles according to number of added devices.
- * For mixed groups defaults are single/single.
- */
- if (!metadata_profile_opt && !mixed) {
- if (num_devices == 1 && ssd)
- printf("Detected a SSD, turning off metadata "
- "duplication. Mkfs with -m dup if you want to "
- "force metadata duplication.\n");
- metadata_profile = (num_devices > 1) ?
- BTRFS_BLOCK_GROUP_RAID1 : (ssd) ? 0: BTRFS_BLOCK_GROUP_DUP;
- }
- if (!data_profile_opt && !mixed) {
- data_profile = (num_devices > 1) ?
- BTRFS_BLOCK_GROUP_RAID0 : 0; /* raid0 or single */
- }
-
- if (devices_for_raid > 4)
- devices_for_raid = 4;
-
- switch (devices_for_raid) {
- default:
- case 4:
- allowed |= BTRFS_BLOCK_GROUP_RAID10;
- case 3:
- allowed |= BTRFS_BLOCK_GROUP_RAID6;
- case 2:
- allowed |= BTRFS_BLOCK_GROUP_RAID0 | BTRFS_BLOCK_GROUP_RAID1 |
- BTRFS_BLOCK_GROUP_RAID5;
- break;
- case 1:
- allowed |= BTRFS_BLOCK_GROUP_DUP;
- }
-
- if (metadata_profile & ~allowed) {
- fprintf(stderr, "unable to create FS with metadata "
- "profile %llu (have %llu devices)\n", metadata_profile,
- num_devices);
- exit(1);
- }
- if (data_profile & ~allowed) {
- fprintf(stderr, "unable to create FS with data "
- "profile %llu (have %llu devices)\n", data_profile,
- num_devices);
- exit(1);
- }
-
- /* allow dup'ed data chunks only in mixed mode */
- if (!mixed && (data_profile & BTRFS_BLOCK_GROUP_DUP)) {
- fprintf(stderr, "dup for data is allowed only in mixed mode\n");
- exit(1);
- }
-
- if (allowed & metadata_profile) {
+ if (metadata_profile) {
u64 meta_flags = BTRFS_BLOCK_GROUP_METADATA;
ret = create_one_raid_group(trans, root,
BTRFS_BLOCK_GROUP_SYSTEM |
- (allowed & metadata_profile));
+ metadata_profile);
BUG_ON(ret);
if (mixed)
meta_flags |= BTRFS_BLOCK_GROUP_DATA;
ret = create_one_raid_group(trans, root, meta_flags |
- (allowed & metadata_profile));
+ metadata_profile);
BUG_ON(ret);
}
- if (!mixed && num_devices > 1 && (allowed & data_profile)) {
+ if (!mixed && num_devices > 1 && data_profile) {
ret = create_one_raid_group(trans, root,
BTRFS_BLOCK_GROUP_DATA |
- (allowed & data_profile));
+ data_profile);
BUG_ON(ret);
}
recow_roots(trans, root);
@@ -1464,14 +1409,48 @@ int main(int ac, char **av)
}
}
- /* if we are here that means all devs are good to btrfsify */
optind = saved_optind;
dev_cnt = ac - optind;
+ file = av[optind++];
+ ssd = is_ssd(file);
+
+ /*
+ * Set default profiles according to number of added devices.
+ * For mixed groups defaults are single/single.
+ */
+ if (!mixed) {
+ if (!metadata_profile_opt) {
+ if (dev_cnt == 1 && ssd)
+ printf("Detected a SSD, turning off metadata "
+ "duplication. Mkfs with -m dup if you want to "
+ "force metadata duplication.\n");
+
+ metadata_profile = (dev_cnt > 1) ?
+ BTRFS_BLOCK_GROUP_RAID1 : (ssd) ?
+ 0: BTRFS_BLOCK_GROUP_DUP;
+ }
+ if (!data_profile_opt) {
+ data_profile = (dev_cnt > 1) ?
+ BTRFS_BLOCK_GROUP_RAID0 : 0; /* raid0 or single */
+ }
+ } else {
+ /* this is not needed but just for completeness */
+ metadata_profile = 0;
+ data_profile = 0;
+ }
+
+ ret = test_num_disk_vs_raid(metadata_profile, data_profile,
+ dev_cnt, mixed, estr);
+ if (ret) {
+ fprintf(stderr, "Error: %s\n", estr);
+ exit(1);
+ }
+
+ /* if we are here that means all devs are good to btrfsify */
printf("\nWARNING! - %s IS EXPERIMENTAL\n", BTRFS_BUILD_VERSION);
printf("WARNING! - see http://btrfs.wiki.kernel.org before using\n\n");
- file = av[optind++];
dev_cnt--;
if (!source_dir_set) {
@@ -1514,7 +1493,6 @@ int main(int ac, char **av)
dev_block_count = block_count;
}
- ssd = is_ssd(file);
if (mixed) {
if (metadata_profile != data_profile) {
@@ -1796,6 +1796,47 @@ out:
return ret;
}
+int test_num_disk_vs_raid(u64 metadata_profile, u64 data_profile,
+ u64 dev_cnt, int mixed, char *estr)
+{
+ size_t sz = 100;
+ u64 allowed = 0;
+
+ switch (dev_cnt) {
+ default:
+ case 4:
+ allowed |= BTRFS_BLOCK_GROUP_RAID10;
+ case 3:
+ allowed |= BTRFS_BLOCK_GROUP_RAID6;
+ case 2:
+ allowed |= BTRFS_BLOCK_GROUP_RAID0 | BTRFS_BLOCK_GROUP_RAID1 |
+ BTRFS_BLOCK_GROUP_RAID5;
+ break;
+ case 1:
+ allowed |= BTRFS_BLOCK_GROUP_DUP;
+ }
+
+ if (metadata_profile & ~allowed) {
+ snprintf(estr, sz, "unable to create FS with metadata "
+ "profile %llu (have %llu devices)\n",
+ metadata_profile, dev_cnt);
+ return 1;
+ }
+ if (data_profile & ~allowed) {
+ snprintf(estr, sz, "unable to create FS with data "
+ "profile %llu (have %llu devices)\n",
+ metadata_profile, dev_cnt);
+ return 1;
+ }
+
+ if (!mixed && (data_profile & BTRFS_BLOCK_GROUP_DUP)) {
+ snprintf(estr, sz,
+ "dup for data is allowed only in mixed mode");
+ return 1;
+ }
+ return 0;
+}
+
/* Check if disk is suitable for btrfs
* returns:
* 1: something is wrong, estr provides the error
@@ -78,4 +78,6 @@ u64 btrfs_device_size(int fd, struct stat *st);
int test_dev_for_mkfs(char *file, int force_overwrite, char *estr);
int scan_for_btrfs(int where, int update_kernel);
int get_label_mounted(const char *mount_path, char *labelp);
+int test_num_disk_vs_raid(u64 metadata_profile, u64 data_profile,
+ u64 dev_cnt, int mixed, char *estr);
#endif
This patch provides fix for the following bug, When mkfs.btrfs fails the disks shouldn't be written. ------------ btrfs fi show /dev/sdb Label: none uuid: 60fb76f4-3b4d-4632-a7da-6a44dea5573d Total devices 1 FS bytes used 24.00KiB devid 1 size 2.00GiB used 20.00MiB path /dev/sdb mkfs.btrfs -dsingle -mraid1 /dev/sdb -f :: unable to create FS with metadata profile 16 (have 1 devices) btrfs fi show /dev/sdb Label: none uuid: 2da2179d-ecb1-4a4e-a44d-e7613a08c18d Total devices 1 FS bytes used 24.00KiB devid 1 size 2.00GiB used 20.00MiB path /dev/sdb ------------- Signed-off-by: Anand Jain <anand.jain@oracle.com> --- mkfs.c | 104 +++++++++++++++++++++++++-------------------------------------- utils.c | 41 +++++++++++++++++++++++++ utils.h | 2 + 3 files changed, 84 insertions(+), 63 deletions(-)