diff mbox

Btrfs: add missing check for writeback errors on fsync

Message ID 1465933822-25805-1-git-send-email-fdmanana@kernel.org (mailing list archive)
State Accepted
Headers show

Commit Message

Filipe Manana June 14, 2016, 7:50 p.m. UTC
From: Filipe Manana <fdmanana@suse.com>

When we start an fsync we start ordered extents for all delalloc ranges.
However before attempting to log the inode, we only wait for those ordered
extents if we are not doing a full sync (bit BTRFS_INODE_NEEDS_FULL_SYNC
is set in the inode's flags). This means that if an ordered extent
completes with an IO error before we check if we can skip logging the
inode, we will not catch and report the IO error to user space. This is
because on an IO error, when the ordered extent completes we do not
update the inode, so if the inode was not previously updated by the
current transaction we end up not logging it through calls to fsync and
therefore not check its mapping flags for the presence of IO errors.

Fix this by checking for errors in the flags of the inode's mapping when
we notice we can skip logging the inode.

This caused sporadic failures in the test generic/331 (which explicitly
tests for IO errors during an fsync call).

Signed-off-by: Filipe Manana <fdmanana@suse.com>
---
 fs/btrfs/file.c | 8 ++++++++
 1 file changed, 8 insertions(+)

Comments

Liu Bo June 15, 2016, 8:50 p.m. UTC | #1
On Tue, Jun 14, 2016 at 08:50:22PM +0100, fdmanana@kernel.org wrote:
> From: Filipe Manana <fdmanana@suse.com>
> 
> When we start an fsync we start ordered extents for all delalloc ranges.
> However before attempting to log the inode, we only wait for those ordered
> extents if we are not doing a full sync (bit BTRFS_INODE_NEEDS_FULL_SYNC
> is set in the inode's flags). This means that if an ordered extent
> completes with an IO error before we check if we can skip logging the
> inode, we will not catch and report the IO error to user space. This is
> because on an IO error, when the ordered extent completes we do not
> update the inode, so if the inode was not previously updated by the
> current transaction we end up not logging it through calls to fsync and
> therefore not check its mapping flags for the presence of IO errors.
> 
> Fix this by checking for errors in the flags of the inode's mapping when
> we notice we can skip logging the inode.
> 
> This caused sporadic failures in the test generic/331 (which explicitly
> tests for IO errors during an fsync call).

Good catch.

Reviewed-by: Liu Bo <bo.li.liu@oracle.com>

Thanks,

-liubo

> 
> Signed-off-by: Filipe Manana <fdmanana@suse.com>
> ---
>  fs/btrfs/file.c | 8 ++++++++
>  1 file changed, 8 insertions(+)
> 
> diff --git a/fs/btrfs/file.c b/fs/btrfs/file.c
> index 159a934..6c6863a 100644
> --- a/fs/btrfs/file.c
> +++ b/fs/btrfs/file.c
> @@ -2039,6 +2039,14 @@ int btrfs_sync_file(struct file *file, loff_t start, loff_t end, int datasync)
>  		 */
>  		clear_bit(BTRFS_INODE_NEEDS_FULL_SYNC,
>  			  &BTRFS_I(inode)->runtime_flags);
> +		/*
> +		 * An ordered extent might have started before and completed
> +		 * already with io errors, in which case the inode was not
> +		 * updated and we end up here. So check the inode's mapping
> +		 * flags for any errors that might have happened while doing
> +		 * writeback of file data.
> +		 */
> +		ret = btrfs_inode_check_errors(inode);
>  		inode_unlock(inode);
>  		goto out;
>  	}
> -- 
> 2.7.0.rc3
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-btrfs" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-btrfs" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/fs/btrfs/file.c b/fs/btrfs/file.c
index 159a934..6c6863a 100644
--- a/fs/btrfs/file.c
+++ b/fs/btrfs/file.c
@@ -2039,6 +2039,14 @@  int btrfs_sync_file(struct file *file, loff_t start, loff_t end, int datasync)
 		 */
 		clear_bit(BTRFS_INODE_NEEDS_FULL_SYNC,
 			  &BTRFS_I(inode)->runtime_flags);
+		/*
+		 * An ordered extent might have started before and completed
+		 * already with io errors, in which case the inode was not
+		 * updated and we end up here. So check the inode's mapping
+		 * flags for any errors that might have happened while doing
+		 * writeback of file data.
+		 */
+		ret = btrfs_inode_check_errors(inode);
 		inode_unlock(inode);
 		goto out;
 	}