diff mbox

[v4,2/3] fstests: test btrfs incremental send after moving a directory

Message ID 1484190817-17326-1-git-send-email-fdmanana@kernel.org (mailing list archive)
State Not Applicable
Headers show

Commit Message

Filipe Manana Jan. 12, 2017, 3:13 a.m. UTC
From: Filipe Manana <fdmanana@suse.com>

Test that an incremental send operation works after moving a directory
into a new parent directory, deleting its previous parent directory and
creating a new inode that has the same inode number as the old parent.

This issue is fixed by the following patch for the linux kernel:

  "Btrfs: incremental send, do not delay rename when parent inode is new"

Signed-off-by: Robbie Ko <robbieko@synology.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
---

v4: Improved changelog and added comments to the test that explain what is
    being tested and the problem.

 tests/btrfs/134     | 126 ++++++++++++++++++++++++++++++++++++++++++++++++++++
 tests/btrfs/134.out |   6 +++
 tests/btrfs/group   |   1 +
 3 files changed, 133 insertions(+)
 create mode 100755 tests/btrfs/134
 create mode 100644 tests/btrfs/134.out

Comments

Eryu Guan Jan. 20, 2017, 5:22 a.m. UTC | #1
On Thu, Jan 12, 2017 at 03:13:37AM +0000, fdmanana@kernel.org wrote:
> From: Filipe Manana <fdmanana@suse.com>
> 
> Test that an incremental send operation works after moving a directory
> into a new parent directory, deleting its previous parent directory and
> creating a new inode that has the same inode number as the old parent.
> 
> This issue is fixed by the following patch for the linux kernel:
> 
>   "Btrfs: incremental send, do not delay rename when parent inode is new"
> 
> Signed-off-by: Robbie Ko <robbieko@synology.com>
> Signed-off-by: Filipe Manana <fdmanana@suse.com>

I tested this patchset with/without proposed kernel patches, all tests
worked as expected. Just one tiny update on commit below.

> ---

> +# Remount the filesystem so that the next created inodes will have the numbers
> +# 258 and 259. This is because when a filesystem is mounted, btrfs sets the
> +# subvolume's inode counter to a value corresponding to the highest inode number
> +# in the subvolume plus 1. This inode counter is used to assign a unique number
> +# to each new inode and it's incremented by 1 after very inode creation.
> +# Note: we unmount and then mount instead of doing a mount with "-o remount"
> +# because otherwise the inode counter remains at value 260.
> +_scratch_unmount
> +_scratch_mount

I replaced these with _scratch_cycle_mount.

Thanks,
Eryu
--
To unsubscribe from this list: send the line "unsubscribe linux-btrfs" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/tests/btrfs/134 b/tests/btrfs/134
new file mode 100755
index 0000000..e4b4c6d
--- /dev/null
+++ b/tests/btrfs/134
@@ -0,0 +1,126 @@ 
+#! /bin/bash
+# FS QA Test No. btrfs/134
+#
+# Test that an incremental send operation works after moving a directory into
+# a new parent directory, deleting its previous parent directory and creating
+# a new inode that has the same inode number as the old parent.
+#
+#-----------------------------------------------------------------------
+# Copyright (C) 2017 Synology Inc. All Rights Reserved.
+# Author: Robbie Ko <robbieko@synology.com>
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc.,  51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+#-----------------------------------------------------------------------
+#
+
+seq=`basename $0`
+seqres=$RESULT_DIR/$seq
+echo "QA output created by $seq"
+
+tmp=/tmp/$$
+status=1	# failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+	cd /
+	rm -fr $send_files_dir
+	rm -f $tmp.*
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+
+# real QA test starts here
+_supported_fs btrfs
+_supported_os Linux
+_require_test
+_require_scratch
+_require_fssum
+
+send_files_dir=$TEST_DIR/btrfs-test-$seq
+
+rm -f $seqres.full
+rm -fr $send_files_dir
+mkdir $send_files_dir
+
+_scratch_mkfs >>$seqres.full 2>&1
+_scratch_mount
+
+mkdir $SCRATCH_MNT/dir257
+mkdir $SCRATCH_MNT/dir258
+mkdir $SCRATCH_MNT/dir259
+mv $SCRATCH_MNT/dir257 $SCRATCH_MNT/dir258/dir257
+
+# Filesystem looks like:
+#
+# .                                                             (ino 256, gen 3)
+# |--- dir258/                                                  (ino 258, gen 7)
+# |       |--- dir257/                                          (ino 257, gen 7)
+# |
+# |--- dir259/                                                  (ino 259, gen 7)
+#
+$BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT \
+    $SCRATCH_MNT/mysnap1 > /dev/null
+
+mv $SCRATCH_MNT/dir258/dir257 $SCRATCH_MNT/dir257
+rmdir $SCRATCH_MNT/dir258
+rmdir $SCRATCH_MNT/dir259
+# Remount the filesystem so that the next created inodes will have the numbers
+# 258 and 259. This is because when a filesystem is mounted, btrfs sets the
+# subvolume's inode counter to a value corresponding to the highest inode number
+# in the subvolume plus 1. This inode counter is used to assign a unique number
+# to each new inode and it's incremented by 1 after very inode creation.
+# Note: we unmount and then mount instead of doing a mount with "-o remount"
+# because otherwise the inode counter remains at value 260.
+_scratch_unmount
+_scratch_mount
+touch $SCRATCH_MNT/file258
+mkdir $SCRATCH_MNT/new_dir259
+mv $SCRATCH_MNT/dir257 $SCRATCH_MNT/new_dir259/dir257
+
+# Filesystem now looks like:
+#
+# .                                                            (ino 256, gen 3)
+# |--- file258                                                 (ino 258, gen 10)
+# |
+# |--- new_dir259/                                             (ino 259, gen 10)
+#          |--- dir257/                                        (ino 257, gen 7)
+#
+$BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT \
+		 $SCRATCH_MNT/mysnap2 > /dev/null
+
+$FSSUM_PROG -A -f -w $send_files_dir/1.fssum $SCRATCH_MNT/mysnap1
+$FSSUM_PROG -A -f -w $send_files_dir/2.fssum \
+        -x $SCRATCH_MNT/mysnap2/mysnap1 $SCRATCH_MNT/mysnap2
+
+$BTRFS_UTIL_PROG send $SCRATCH_MNT/mysnap1 -f \
+	$send_files_dir/1.snap 2>&1 1>/dev/null | _filter_scratch
+$BTRFS_UTIL_PROG send -p $SCRATCH_MNT/mysnap1 $SCRATCH_MNT/mysnap2 \
+	-f $send_files_dir/2.snap 2>&1 1>/dev/null | _filter_scratch
+
+# Now recreate the filesystem by receiving both send streams and verify we get
+# the same content that the original filesystem had.
+_scratch_unmount
+_scratch_mkfs >>$seqres.full 2>&1
+_scratch_mount
+
+$BTRFS_UTIL_PROG receive $SCRATCH_MNT -f $send_files_dir/1.snap > /dev/null
+$FSSUM_PROG -r $send_files_dir/1.fssum $SCRATCH_MNT/mysnap1
+$BTRFS_UTIL_PROG receive $SCRATCH_MNT -f $send_files_dir/2.snap > /dev/null
+$FSSUM_PROG -r $send_files_dir/2.fssum $SCRATCH_MNT/mysnap2
+
+status=0
+exit
diff --git a/tests/btrfs/134.out b/tests/btrfs/134.out
new file mode 100644
index 0000000..75b30a1
--- /dev/null
+++ b/tests/btrfs/134.out
@@ -0,0 +1,6 @@ 
+QA output created by 134
+At subvol SCRATCH_MNT/mysnap1
+At subvol SCRATCH_MNT/mysnap2
+At subvol mysnap1
+OK
+OK
diff --git a/tests/btrfs/group b/tests/btrfs/group
index 0cdd413..f33befb 100644
--- a/tests/btrfs/group
+++ b/tests/btrfs/group
@@ -135,3 +135,4 @@ 
 131 auto quick
 132 auto enospc
 133 auto quick send
+134 auto quick send