@@ -1949,6 +1949,171 @@ static u64 btrfs_num_devices(struct btrfs_fs_info *fs_info)
return num_devices;
}
+/*
+ * sort the devices in descending order by max_avail, total_avail
+ */
+static int btrfs_cmp_device_info(const void *a, const void *b)
+{
+ const struct btrfs_device_info *di_a = a;
+ const struct btrfs_device_info *di_b = b;
+
+ if (di_a->max_avail > di_b->max_avail)
+ return -1;
+ if (di_a->max_avail < di_b->max_avail)
+ return 1;
+ if (di_a->total_avail > di_b->total_avail)
+ return -1;
+ if (di_a->total_avail < di_b->total_avail)
+ return 1;
+ return 0;
+}
+
+/*
+ * Return 0 if we allocated any virtual(*) chunk, and restore the size to
+ * @allocated (the last parameter).
+ * Return -ENOSPC if we have no more space to allocate virtual chunk
+ *
+ * *: virtual chunk is a space holder for per-profile available space
+ * calculator.
+ * Such virtual chunks won't take on-disk space, thus called virtual, and
+ * only affects per-profile available space calulation.
+ */
+static int alloc_virtual_chunk(struct btrfs_fs_info *fs_info,
+ struct btrfs_device_info *devices_info,
+ enum btrfs_raid_types type,
+ u64 *allocated)
+{
+ const struct btrfs_raid_attr *raid_attr = &btrfs_raid_array[type];
+ struct btrfs_fs_devices *fs_devices = fs_info->fs_devices;
+ struct btrfs_device *device;
+ u64 stripe_size;
+ int i;
+ int ndevs = 0;
+
+ lockdep_assert_held(&fs_info->chunk_mutex);
+
+ /* Go through devices to collect their unallocated space */
+ list_for_each_entry(device, &fs_devices->alloc_list, dev_alloc_list) {
+ u64 avail;
+ if (!test_bit(BTRFS_DEV_STATE_IN_FS_METADATA,
+ &device->dev_state) ||
+ test_bit(BTRFS_DEV_STATE_REPLACE_TGT, &device->dev_state))
+ continue;
+
+ if (device->total_bytes > device->bytes_used +
+ device->virtual_allocated)
+ avail = device->total_bytes - device->bytes_used -
+ device->virtual_allocated;
+ else
+ avail = 0;
+
+ /* And exclude the [0, 1M) reserved space */
+ if (avail > SZ_1M)
+ avail -= SZ_1M;
+ else
+ avail = 0;
+
+ if (avail < fs_info->sectorsize)
+ continue;
+ /*
+ * Unlike chunk allocator, we don't care about stripe or hole
+ * size, so here we use @avail directly
+ */
+ devices_info[ndevs].dev_offset = 0;
+ devices_info[ndevs].total_avail = avail;
+ devices_info[ndevs].max_avail = avail;
+ devices_info[ndevs].dev = device;
+ ++ndevs;
+ }
+ sort(devices_info, ndevs, sizeof(struct btrfs_device_info),
+ btrfs_cmp_device_info, NULL);
+ ndevs = rounddown(ndevs, raid_attr->devs_increment);
+ if (ndevs < raid_attr->devs_min)
+ return -ENOSPC;
+ if (raid_attr->devs_max)
+ ndevs = min(ndevs, (int)raid_attr->devs_max);
+ else
+ ndevs = min(ndevs, (int)BTRFS_MAX_DEVS(fs_info));
+
+ /*
+ * Now allocate a virtual chunk using the unallocated space of the
+ * device with the least unallocated space.
+ */
+ stripe_size = round_down(devices_info[ndevs - 1].total_avail,
+ fs_info->sectorsize);
+ for (i = 0; i < ndevs; i++)
+ devices_info[i].dev->virtual_allocated += stripe_size;
+ *allocated = stripe_size * (ndevs - raid_attr->nparity) /
+ raid_attr->ncopies;
+ return 0;
+}
+
+static int calc_one_profile_avail(struct btrfs_fs_info *fs_info,
+ enum btrfs_raid_types type,
+ u64 *result_ret)
+{
+ struct btrfs_device_info *devices_info = NULL;
+ struct btrfs_fs_devices *fs_devices = fs_info->fs_devices;
+ struct btrfs_device *device;
+ u64 allocated;
+ u64 result = 0;
+ int ret = 0;
+
+ lockdep_assert_held(&fs_info->chunk_mutex);
+ ASSERT(type >= 0 && type < BTRFS_NR_RAID_TYPES);
+
+ /* Not enough devices, quick exit, just update the result */
+ if (fs_devices->rw_devices < btrfs_raid_array[type].devs_min)
+ goto out;
+
+ devices_info = kcalloc(fs_devices->rw_devices, sizeof(*devices_info),
+ GFP_NOFS);
+ if (!devices_info) {
+ ret = -ENOMEM;
+ goto out;
+ }
+ /* Clear virtual chunk used space for each device */
+ list_for_each_entry(device, &fs_devices->alloc_list, dev_alloc_list)
+ device->virtual_allocated = 0;
+
+ while (!alloc_virtual_chunk(fs_info, devices_info, type, &allocated))
+ result += allocated;
+
+ list_for_each_entry(device, &fs_devices->alloc_list, dev_alloc_list)
+ device->virtual_allocated = 0;
+out:
+ kfree(devices_info);
+ if (ret < 0 && ret != -ENOSPC)
+ return ret;
+ *result_ret = result;
+ return 0;
+}
+
+/*
+ * Calculate the per-profile available space array.
+ *
+ * Return 0 if we succeeded updating the array.
+ * Return <0 if something went wrong (ENOMEM), and the array is not
+ * updated.
+ */
+static int calc_per_profile_avail(struct btrfs_fs_info *fs_info)
+{
+ u64 results[BTRFS_NR_RAID_TYPES];
+ int i;
+ int ret;
+
+ for (i = 0; i < BTRFS_NR_RAID_TYPES; i++) {
+ ret = calc_one_profile_avail(fs_info, i, &results[i]);
+ if (ret < 0)
+ return ret;
+ }
+
+ for (i = 0; i < BTRFS_NR_RAID_TYPES; i++)
+ atomic64_set(&fs_info->fs_devices->per_profile_avail[i],
+ results[i]);
+ return ret;
+}
+
int btrfs_rm_device(struct btrfs_fs_info *fs_info, const char *device_path,
u64 devid)
{
@@ -2000,7 +2165,10 @@ int btrfs_rm_device(struct btrfs_fs_info *fs_info, const char *device_path,
mutex_lock(&fs_info->chunk_mutex);
list_del_init(&device->dev_alloc_list);
device->fs_devices->rw_devices--;
+ ret = calc_per_profile_avail(fs_info);
mutex_unlock(&fs_info->chunk_mutex);
+ if (ret < 0)
+ goto error_undo;
}
mutex_unlock(&uuid_mutex);
@@ -2530,8 +2698,13 @@ int btrfs_init_new_device(struct btrfs_fs_info *fs_info, const char *device_path
*/
btrfs_clear_space_info_full(fs_info);
+ ret = calc_per_profile_avail(fs_info);
mutex_unlock(&fs_info->chunk_mutex);
mutex_unlock(&fs_devices->device_list_mutex);
+ if (ret < 0) {
+ btrfs_abort_transaction(trans, ret);
+ goto error_sysfs;
+ }
if (seeding_dev) {
mutex_lock(&fs_info->chunk_mutex);
@@ -2676,6 +2849,7 @@ int btrfs_grow_device(struct btrfs_trans_handle *trans,
struct btrfs_super_block *super_copy = fs_info->super_copy;
u64 old_total;
u64 diff;
+ int ret;
if (!test_bit(BTRFS_DEV_STATE_WRITEABLE, &device->dev_state))
return -EACCES;
@@ -2702,7 +2876,10 @@ int btrfs_grow_device(struct btrfs_trans_handle *trans,
if (list_empty(&device->post_commit_list))
list_add_tail(&device->post_commit_list,
&trans->transaction->dev_update_list);
+ ret = calc_per_profile_avail(fs_info);
mutex_unlock(&fs_info->chunk_mutex);
+ if (ret < 0)
+ return ret;
return btrfs_update_device(trans, device);
}
@@ -2872,7 +3049,13 @@ int btrfs_remove_chunk(struct btrfs_trans_handle *trans, u64 chunk_offset)
device->bytes_used - dev_extent_len);
atomic64_add(dev_extent_len, &fs_info->free_chunk_space);
btrfs_clear_space_info_full(fs_info);
+ ret = calc_per_profile_avail(fs_info);
mutex_unlock(&fs_info->chunk_mutex);
+ if (ret < 0) {
+ mutex_unlock(&fs_devices->device_list_mutex);
+ btrfs_abort_transaction(trans, ret);
+ goto out;
+ }
}
ret = btrfs_update_device(trans, device);
@@ -4578,6 +4761,11 @@ int btrfs_shrink_device(struct btrfs_device *device, u64 new_size)
atomic64_sub(diff, &fs_info->free_chunk_space);
}
+ ret = calc_per_profile_avail(fs_info);
+ if (ret < 0) {
+ mutex_unlock(&fs_info->chunk_mutex);
+ goto done;
+ }
/*
* Once the device's size has been set to the new size, ensure all
* in-memory chunks are synced to disk so that the loop below sees them
@@ -4742,25 +4930,6 @@ static int btrfs_add_system_chunk(struct btrfs_fs_info *fs_info,
return 0;
}
-/*
- * sort the devices in descending order by max_avail, total_avail
- */
-static int btrfs_cmp_device_info(const void *a, const void *b)
-{
- const struct btrfs_device_info *di_a = a;
- const struct btrfs_device_info *di_b = b;
-
- if (di_a->max_avail > di_b->max_avail)
- return -1;
- if (di_a->max_avail < di_b->max_avail)
- return 1;
- if (di_a->total_avail > di_b->total_avail)
- return -1;
- if (di_a->total_avail < di_b->total_avail)
- return 1;
- return 0;
-}
-
static void check_raid56_incompat_flag(struct btrfs_fs_info *info, u64 type)
{
if (!(type & BTRFS_BLOCK_GROUP_RAID56_MASK))
@@ -5038,6 +5207,7 @@ static int __btrfs_alloc_chunk(struct btrfs_trans_handle *trans,
list_add_tail(&dev->post_commit_list,
&trans->transaction->dev_update_list);
}
+ ret = calc_per_profile_avail(info);
atomic64_sub(stripe_size * map->num_stripes, &info->free_chunk_space);
@@ -5046,7 +5216,7 @@ static int __btrfs_alloc_chunk(struct btrfs_trans_handle *trans,
check_raid1c34_incompat_flag(info, type);
kfree(devices_info);
- return 0;
+ return ret;
error_del_extent:
write_lock(&em_tree->lock);
@@ -7609,6 +7779,13 @@ int btrfs_verify_dev_extents(struct btrfs_fs_info *fs_info)
/* Ensure all chunks have corresponding dev extents */
ret = verify_chunk_dev_extent_mapping(fs_info);
+ if (ret < 0)
+ goto out;
+
+ /* All dev extents are verified, update per-profile available space */
+ mutex_lock(&fs_info->chunk_mutex);
+ ret = calc_per_profile_avail(fs_info);
+ mutex_unlock(&fs_info->chunk_mutex);
out:
btrfs_free_path(path);
return ret;
@@ -140,6 +140,13 @@ struct btrfs_device {
struct completion kobj_unregister;
/* For sysfs/FSID/devinfo/devid/ */
struct kobject devid_kobj;
+
+ /*
+ * the "virtual" allocated space by virtual chunk allocator, which
+ * is used to do accurate estimation on available space.
+ * Doesn't affect real chunk allocator.
+ */
+ u64 virtual_allocated;
};
/*
@@ -259,6 +266,9 @@ struct btrfs_fs_devices {
struct kobject fsid_kobj;
struct kobject *devices_kobj;
struct completion kobj_unregister;
+
+ /* Records per-type available space */
+ atomic64_t per_profile_avail[BTRFS_NR_RAID_TYPES];
};
#define BTRFS_BIO_INLINE_CSUM_SIZE 64
[PROBLEM] There are some locations in btrfs requiring accurate estimation on how many new bytes can be allocated on unallocated space. We have two types of estimation: - Factor based calculation Just use all unallocated space, divide by the profile factor One obvious user is can_overcommit(). - Chunk allocator like calculation This will emulate the chunk allocator behavior, to get a proper estimation. The only user is btrfs_calc_avail_data_space(), utilized by btrfs_statfs(). The problem is, that function is not generic purposed enough, can't handle things like RAID5/6. Current factor based calculation can't handle the following case: devid 1 unallocated: 1T devid 2 unallocated: 10T metadata type: RAID1 If using factor, we can use (1T + 10T) / 2 = 5.5T free space for metadata. But in fact we can only get 1T free space, as we're limited by the smallest device for RAID1. [SOLUTION] This patch will introduce per-profile available space calculation, which can give an estimation based on chunk-allocator-like behavior. The difference between it and chunk allocator is mostly on rounding and [0, 1M) reserved space handling, which shouldn't cause practical impact. The newly introduced per-profile available space calculation will calculate available space for each type, using chunk-allocator like calculation. With that facility, for above device layout we get the full available space array: RAID10: 0 (not enough devices) RAID1: 1T RAID1C3: 0 (not enough devices) RAID1C4: 0 (not enough devices) DUP: 5.5T RAID0: 2T SINGLE: 11T RAID5: 1T RAID6: 0 (not enough devices) Or for a more complex example: devid 1 unallocated: 1T devid 2 unallocated: 1T devid 3 unallocated: 10T We will get an array of: RAID10: 0 (not enough devices) RAID1: 2T RAID1C3: 1T RAID1C4: 0 (not enough devices) DUP: 6T RAID0: 3T SINGLE: 12T RAID5: 2T RAID6: 0 (not enough devices) And for the each profile , we go chunk allocator level calculation: The pseudo code looks like: clear_virtual_used_space_of_all_rw_devices(); do { /* * The same as chunk allocator, despite used space, * we also take virtual used space into consideration. */ sort_device_with_virtual_free_space(); /* * Unlike chunk allocator, we don't need to bother hole/stripe * size, so we use the smallest device to make sure we can * allocated as many stripes as regular chunk allocator */ stripe_size = device_with_smallest_free->avail_space; stripe_size = min(stripe_size, to_alloc / ndevs); /* * Allocate a virtual chunk, allocated virtual chunk will * increase virtual used space, allow next iteration to * properly emulate chunk allocator behavior. */ ret = alloc_virtual_chunk(stripe_size, &allocated_size); if (ret == 0) avail += allocated_size; } while (ret == 0) As we always select the device with least free space, the device with the most space will be the first to be utilized, just like chunk allocator. For above 1T + 10T device, we will allocate a 1T virtual chunk in the first iteration, then run out of device in next iteration. Thus only get 1T free space for RAID1 type, just like what chunk allocator would do. The patch will update such per-profile available space at the following timing: - Mount time - Chunk allocation - Chunk removal - Device grow - Device shrink - Device add - Device removal Those timing are all protected by chunk_mutex, and what we do are only iterating in-memory only structures, no extra IO triggered, so the performance impact should be pretty small. For the extra error handling, the principle is to keep the old behavior. That's to say, if old error handler would just return an error, then we follow it, no matter if the caller reverts the device size. For the proper error handling, they will be added in later patches. As I don't want to make the core facility bloated by the error handling code, especially some situation needs quite some new code to handle errors. Suggested-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Qu Wenruo <wqu@suse.com> --- fs/btrfs/volumes.c | 217 ++++++++++++++++++++++++++++++++++++++++----- fs/btrfs/volumes.h | 10 +++ 2 files changed, 207 insertions(+), 20 deletions(-)