diff --git a/fs/btrfs/Makefile b/fs/btrfs/Makefile
index 9a0ff3384381..e738f6206ea5 100644
--- a/fs/btrfs/Makefile
+++ b/fs/btrfs/Makefile
@@ -11,7 +11,7 @@ btrfs-y += super.o ctree.o extent-tree.o print-tree.o root-tree.o dir-item.o \
 	   compression.o delayed-ref.o relocation.o delayed-inode.o scrub.o \
 	   reada.o backref.o ulist.o qgroup.o send.o dev-replace.o raid56.o \
 	   uuid-tree.o props.o free-space-tree.o tree-checker.o space-info.o \
-	   block-rsv.o delalloc-space.o block-group.o discard.o
+	   block-rsv.o delalloc-space.o block-group.o discard.o reflink.o
 
 btrfs-$(CONFIG_BTRFS_FS_POSIX_ACL) += acl.o
 btrfs-$(CONFIG_BTRFS_FS_CHECK_INTEGRITY) += check-integrity.o
diff --git a/fs/btrfs/ctree.h b/fs/btrfs/ctree.h
index bb237d577725..23d486d44202 100644
--- a/fs/btrfs/ctree.h
+++ b/fs/btrfs/ctree.h
@@ -2989,9 +2989,6 @@ int btrfs_dirty_pages(struct inode *inode, struct page **pages,
 		      size_t num_pages, loff_t pos, size_t write_bytes,
 		      struct extent_state **cached);
 int btrfs_fdatawrite_range(struct inode *inode, loff_t start, loff_t end);
-loff_t btrfs_remap_file_range(struct file *file_in, loff_t pos_in,
-			      struct file *file_out, loff_t pos_out,
-			      loff_t len, unsigned int remap_flags);
 
 /* tree-defrag.c */
 int btrfs_defrag_leaves(struct btrfs_trans_handle *trans,
diff --git a/fs/btrfs/file.c b/fs/btrfs/file.c
index fd52ad00b6c8..6ba39f11580c 100644
--- a/fs/btrfs/file.c
+++ b/fs/btrfs/file.c
@@ -27,6 +27,7 @@
 #include "qgroup.h"
 #include "compression.h"
 #include "delalloc-space.h"
+#include "reflink.h"
 
 static struct kmem_cache *btrfs_inode_defrag_cachep;
 /*
diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c
index 7305e6770157..ea6a70dd2785 100644
--- a/fs/btrfs/ioctl.c
+++ b/fs/btrfs/ioctl.c
@@ -86,10 +86,6 @@ struct btrfs_ioctl_send_args_32 {
 			       struct btrfs_ioctl_send_args_32)
 #endif
 
-static int btrfs_clone(struct inode *src, struct inode *inode,
-		       u64 off, u64 olen, u64 olen_aligned, u64 destoff,
-		       int no_time_update);
-
 /* Mask out flags that are inappropriate for the given type of inode. */
 static unsigned int btrfs_mask_fsflags_for_type(struct inode *inode,
 		unsigned int flags)
@@ -3228,735 +3224,6 @@ static long btrfs_ioctl_dev_info(struct btrfs_fs_info *fs_info,
 	return ret;
 }
 
-static void btrfs_double_extent_unlock(struct inode *inode1, u64 loff1,
-				       struct inode *inode2, u64 loff2, u64 len)
-{
-	unlock_extent(&BTRFS_I(inode1)->io_tree, loff1, loff1 + len - 1);
-	unlock_extent(&BTRFS_I(inode2)->io_tree, loff2, loff2 + len - 1);
-}
-
-static void btrfs_double_extent_lock(struct inode *inode1, u64 loff1,
-				     struct inode *inode2, u64 loff2, u64 len)
-{
-	if (inode1 < inode2) {
-		swap(inode1, inode2);
-		swap(loff1, loff2);
-	} else if (inode1 == inode2 && loff2 < loff1) {
-		swap(loff1, loff2);
-	}
-	lock_extent(&BTRFS_I(inode1)->io_tree, loff1, loff1 + len - 1);
-	lock_extent(&BTRFS_I(inode2)->io_tree, loff2, loff2 + len - 1);
-}
-
-static int btrfs_extent_same_range(struct inode *src, u64 loff, u64 len,
-				   struct inode *dst, u64 dst_loff)
-{
-	const u64 bs = BTRFS_I(src)->root->fs_info->sb->s_blocksize;
-	int ret;
-
-	/*
-	 * Lock destination range to serialize with concurrent readpages() and
-	 * source range to serialize with relocation.
-	 */
-	btrfs_double_extent_lock(src, loff, dst, dst_loff, len);
-	ret = btrfs_clone(src, dst, loff, len, ALIGN(len, bs), dst_loff, 1);
-	btrfs_double_extent_unlock(src, loff, dst, dst_loff, len);
-
-	return ret;
-}
-
-#define BTRFS_MAX_DEDUPE_LEN	SZ_16M
-
-static int btrfs_extent_same(struct inode *src, u64 loff, u64 olen,
-			     struct inode *dst, u64 dst_loff)
-{
-	int ret;
-	u64 i, tail_len, chunk_count;
-	struct btrfs_root *root_dst = BTRFS_I(dst)->root;
-
-	spin_lock(&root_dst->root_item_lock);
-	if (root_dst->send_in_progress) {
-		btrfs_warn_rl(root_dst->fs_info,
-"cannot deduplicate to root %llu while send operations are using it (%d in progress)",
-			      root_dst->root_key.objectid,
-			      root_dst->send_in_progress);
-		spin_unlock(&root_dst->root_item_lock);
-		return -EAGAIN;
-	}
-	root_dst->dedupe_in_progress++;
-	spin_unlock(&root_dst->root_item_lock);
-
-	tail_len = olen % BTRFS_MAX_DEDUPE_LEN;
-	chunk_count = div_u64(olen, BTRFS_MAX_DEDUPE_LEN);
-
-	for (i = 0; i < chunk_count; i++) {
-		ret = btrfs_extent_same_range(src, loff, BTRFS_MAX_DEDUPE_LEN,
-					      dst, dst_loff);
-		if (ret)
-			goto out;
-
-		loff += BTRFS_MAX_DEDUPE_LEN;
-		dst_loff += BTRFS_MAX_DEDUPE_LEN;
-	}
-
-	if (tail_len > 0)
-		ret = btrfs_extent_same_range(src, loff, tail_len, dst,
-					      dst_loff);
-out:
-	spin_lock(&root_dst->root_item_lock);
-	root_dst->dedupe_in_progress--;
-	spin_unlock(&root_dst->root_item_lock);
-
-	return ret;
-}
-
-static int clone_finish_inode_update(struct btrfs_trans_handle *trans,
-				     struct inode *inode,
-				     u64 endoff,
-				     const u64 destoff,
-				     const u64 olen,
-				     int no_time_update)
-{
-	struct btrfs_root *root = BTRFS_I(inode)->root;
-	int ret;
-
-	inode_inc_iversion(inode);
-	if (!no_time_update)
-		inode->i_mtime = inode->i_ctime = current_time(inode);
-	/*
-	 * We round up to the block size at eof when determining which
-	 * extents to clone above, but shouldn't round up the file size.
-	 */
-	if (endoff > destoff + olen)
-		endoff = destoff + olen;
-	if (endoff > inode->i_size) {
-		i_size_write(inode, endoff);
-		btrfs_inode_safe_disk_i_size_write(inode, 0);
-	}
-
-	ret = btrfs_update_inode(trans, root, inode);
-	if (ret) {
-		btrfs_abort_transaction(trans, ret);
-		btrfs_end_transaction(trans);
-		goto out;
-	}
-	ret = btrfs_end_transaction(trans);
-out:
-	return ret;
-}
-
-/*
- * Make sure we do not end up inserting an inline extent into a file that has
- * already other (non-inline) extents. If a file has an inline extent it can
- * not have any other extents and the (single) inline extent must start at the
- * file offset 0. Failing to respect these rules will lead to file corruption,
- * resulting in EIO errors on read/write operations, hitting BUG_ON's in mm, etc
- *
- * We can have extents that have been already written to disk or we can have
- * dirty ranges still in delalloc, in which case the extent maps and items are
- * created only when we run delalloc, and the delalloc ranges might fall outside
- * the range we are currently locking in the inode's io tree. So we check the
- * inode's i_size because of that (i_size updates are done while holding the
- * i_mutex, which we are holding here).
- * We also check to see if the inode has a size not greater than "datal" but has
- * extents beyond it, due to an fallocate with FALLOC_FL_KEEP_SIZE (and we are
- * protected against such concurrent fallocate calls by the i_mutex).
- *
- * If the file has no extents but a size greater than datal, do not allow the
- * copy because we would need turn the inline extent into a non-inline one (even
- * with NO_HOLES enabled). If we find our destination inode only has one inline
- * extent, just overwrite it with the source inline extent if its size is less
- * than the source extent's size, or we could copy the source inline extent's
- * data into the destination inode's inline extent if the later is greater then
- * the former.
- */
-static int clone_copy_inline_extent(struct inode *dst,
-				    struct btrfs_trans_handle *trans,
-				    struct btrfs_path *path,
-				    struct btrfs_key *new_key,
-				    const u64 drop_start,
-				    const u64 datal,
-				    const u64 skip,
-				    const u64 size,
-				    char *inline_data)
-{
-	struct btrfs_fs_info *fs_info = btrfs_sb(dst->i_sb);
-	struct btrfs_root *root = BTRFS_I(dst)->root;
-	const u64 aligned_end = ALIGN(new_key->offset + datal,
-				      fs_info->sectorsize);
-	int ret;
-	struct btrfs_key key;
-
-	if (new_key->offset > 0)
-		return -EOPNOTSUPP;
-
-	key.objectid = btrfs_ino(BTRFS_I(dst));
-	key.type = BTRFS_EXTENT_DATA_KEY;
-	key.offset = 0;
-	ret = btrfs_search_slot(NULL, root, &key, path, 0, 0);
-	if (ret < 0) {
-		return ret;
-	} else if (ret > 0) {
-		if (path->slots[0] >= btrfs_header_nritems(path->nodes[0])) {
-			ret = btrfs_next_leaf(root, path);
-			if (ret < 0)
-				return ret;
-			else if (ret > 0)
-				goto copy_inline_extent;
-		}
-		btrfs_item_key_to_cpu(path->nodes[0], &key, path->slots[0]);
-		if (key.objectid == btrfs_ino(BTRFS_I(dst)) &&
-		    key.type == BTRFS_EXTENT_DATA_KEY) {
-			ASSERT(key.offset > 0);
-			return -EOPNOTSUPP;
-		}
-	} else if (i_size_read(dst) <= datal) {
-		struct btrfs_file_extent_item *ei;
-		u64 ext_len;
-
-		/*
-		 * If the file size is <= datal, make sure there are no other
-		 * extents following (can happen do to an fallocate call with
-		 * the flag FALLOC_FL_KEEP_SIZE).
-		 */
-		ei = btrfs_item_ptr(path->nodes[0], path->slots[0],
-				    struct btrfs_file_extent_item);
-		/*
-		 * If it's an inline extent, it can not have other extents
-		 * following it.
-		 */
-		if (btrfs_file_extent_type(path->nodes[0], ei) ==
-		    BTRFS_FILE_EXTENT_INLINE)
-			goto copy_inline_extent;
-
-		ext_len = btrfs_file_extent_num_bytes(path->nodes[0], ei);
-		if (ext_len > aligned_end)
-			return -EOPNOTSUPP;
-
-		ret = btrfs_next_item(root, path);
-		if (ret < 0) {
-			return ret;
-		} else if (ret == 0) {
-			btrfs_item_key_to_cpu(path->nodes[0], &key,
-					      path->slots[0]);
-			if (key.objectid == btrfs_ino(BTRFS_I(dst)) &&
-			    key.type == BTRFS_EXTENT_DATA_KEY)
-				return -EOPNOTSUPP;
-		}
-	}
-
-copy_inline_extent:
-	/*
-	 * We have no extent items, or we have an extent at offset 0 which may
-	 * or may not be inlined. All these cases are dealt the same way.
-	 */
-	if (i_size_read(dst) > datal) {
-		/*
-		 * If the destination inode has an inline extent...
-		 * This would require copying the data from the source inline
-		 * extent into the beginning of the destination's inline extent.
-		 * But this is really complex, both extents can be compressed
-		 * or just one of them, which would require decompressing and
-		 * re-compressing data (which could increase the new compressed
-		 * size, not allowing the compressed data to fit anymore in an
-		 * inline extent).
-		 * So just don't support this case for now (it should be rare,
-		 * we are not really saving space when cloning inline extents).
-		 */
-		return -EOPNOTSUPP;
-	}
-
-	btrfs_release_path(path);
-	ret = btrfs_drop_extents(trans, root, dst, drop_start, aligned_end, 1);
-	if (ret)
-		return ret;
-	ret = btrfs_insert_empty_item(trans, root, path, new_key, size);
-	if (ret)
-		return ret;
-
-	if (skip) {
-		const u32 start = btrfs_file_extent_calc_inline_size(0);
-
-		memmove(inline_data + start, inline_data + start + skip, datal);
-	}
-
-	write_extent_buffer(path->nodes[0], inline_data,
-			    btrfs_item_ptr_offset(path->nodes[0],
-						  path->slots[0]),
-			    size);
-	inode_add_bytes(dst, datal);
-	set_bit(BTRFS_INODE_NEEDS_FULL_SYNC, &BTRFS_I(dst)->runtime_flags);
-
-	return 0;
-}
-
-/**
- * btrfs_clone() - clone a range from inode file to another
- *
- * @src: Inode to clone from
- * @inode: Inode to clone to
- * @off: Offset within source to start clone from
- * @olen: Original length, passed by user, of range to clone
- * @olen_aligned: Block-aligned value of olen
- * @destoff: Offset within @inode to start clone
- * @no_time_update: Whether to update mtime/ctime on the target inode
- */
-static int btrfs_clone(struct inode *src, struct inode *inode,
-		       const u64 off, const u64 olen, const u64 olen_aligned,
-		       const u64 destoff, int no_time_update)
-{
-	struct btrfs_fs_info *fs_info = btrfs_sb(inode->i_sb);
-	struct btrfs_root *root = BTRFS_I(inode)->root;
-	struct btrfs_path *path = NULL;
-	struct extent_buffer *leaf;
-	struct btrfs_trans_handle *trans;
-	char *buf = NULL;
-	struct btrfs_key key;
-	u32 nritems;
-	int slot;
-	int ret;
-	const u64 len = olen_aligned;
-	u64 last_dest_end = destoff;
-
-	ret = -ENOMEM;
-	buf = kvmalloc(fs_info->nodesize, GFP_KERNEL);
-	if (!buf)
-		return ret;
-
-	path = btrfs_alloc_path();
-	if (!path) {
-		kvfree(buf);
-		return ret;
-	}
-
-	path->reada = READA_FORWARD;
-	/* clone data */
-	key.objectid = btrfs_ino(BTRFS_I(src));
-	key.type = BTRFS_EXTENT_DATA_KEY;
-	key.offset = off;
-
-	while (1) {
-		u64 next_key_min_offset = key.offset + 1;
-		struct btrfs_file_extent_item *extent;
-		int type;
-		u32 size;
-		struct btrfs_key new_key;
-		u64 disko = 0, diskl = 0;
-		u64 datao = 0, datal = 0;
-		u8 comp;
-		u64 drop_start;
-
-		/*
-		 * note the key will change type as we walk through the
-		 * tree.
-		 */
-		path->leave_spinning = 1;
-		ret = btrfs_search_slot(NULL, BTRFS_I(src)->root, &key, path,
-				0, 0);
-		if (ret < 0)
-			goto out;
-		/*
-		 * First search, if no extent item that starts at offset off was
-		 * found but the previous item is an extent item, it's possible
-		 * it might overlap our target range, therefore process it.
-		 */
-		if (key.offset == off && ret > 0 && path->slots[0] > 0) {
-			btrfs_item_key_to_cpu(path->nodes[0], &key,
-					      path->slots[0] - 1);
-			if (key.type == BTRFS_EXTENT_DATA_KEY)
-				path->slots[0]--;
-		}
-
-		nritems = btrfs_header_nritems(path->nodes[0]);
-process_slot:
-		if (path->slots[0] >= nritems) {
-			ret = btrfs_next_leaf(BTRFS_I(src)->root, path);
-			if (ret < 0)
-				goto out;
-			if (ret > 0)
-				break;
-			nritems = btrfs_header_nritems(path->nodes[0]);
-		}
-		leaf = path->nodes[0];
-		slot = path->slots[0];
-
-		btrfs_item_key_to_cpu(leaf, &key, slot);
-		if (key.type > BTRFS_EXTENT_DATA_KEY ||
-		    key.objectid != btrfs_ino(BTRFS_I(src)))
-			break;
-
-		ASSERT(key.type == BTRFS_EXTENT_DATA_KEY);
-
-		extent = btrfs_item_ptr(leaf, slot,
-					struct btrfs_file_extent_item);
-		comp = btrfs_file_extent_compression(leaf, extent);
-		type = btrfs_file_extent_type(leaf, extent);
-		if (type == BTRFS_FILE_EXTENT_REG ||
-		    type == BTRFS_FILE_EXTENT_PREALLOC) {
-			disko = btrfs_file_extent_disk_bytenr(leaf, extent);
-			diskl = btrfs_file_extent_disk_num_bytes(leaf, extent);
-			datao = btrfs_file_extent_offset(leaf, extent);
-			datal = btrfs_file_extent_num_bytes(leaf, extent);
-		} else if (type == BTRFS_FILE_EXTENT_INLINE) {
-			/* Take upper bound, may be compressed */
-			datal = btrfs_file_extent_ram_bytes(leaf, extent);
-		}
-
-		/*
-		 * The first search might have left us at an extent item that
-		 * ends before our target range's start, can happen if we have
-		 * holes and NO_HOLES feature enabled.
-		 */
-		if (key.offset + datal <= off) {
-			path->slots[0]++;
-			goto process_slot;
-		} else if (key.offset >= off + len) {
-			break;
-		}
-		next_key_min_offset = key.offset + datal;
-		size = btrfs_item_size_nr(leaf, slot);
-		read_extent_buffer(leaf, buf, btrfs_item_ptr_offset(leaf, slot),
-				   size);
-
-		btrfs_release_path(path);
-		path->leave_spinning = 0;
-
-		memcpy(&new_key, &key, sizeof(new_key));
-		new_key.objectid = btrfs_ino(BTRFS_I(inode));
-		if (off <= key.offset)
-			new_key.offset = key.offset + destoff - off;
-		else
-			new_key.offset = destoff;
-
-		/*
-		 * Deal with a hole that doesn't have an extent item that
-		 * represents it (NO_HOLES feature enabled).
-		 * This hole is either in the middle of the cloning range or at
-		 * the beginning (fully overlaps it or partially overlaps it).
-		 */
-		if (new_key.offset != last_dest_end)
-			drop_start = last_dest_end;
-		else
-			drop_start = new_key.offset;
-
-		if (type == BTRFS_FILE_EXTENT_REG ||
-		    type == BTRFS_FILE_EXTENT_PREALLOC) {
-			struct btrfs_clone_extent_info clone_info;
-
-			/*
-			 *    a  | --- range to clone ---|  b
-			 * | ------------- extent ------------- |
-			 */
-
-			/* Subtract range b */
-			if (key.offset + datal > off + len)
-				datal = off + len - key.offset;
-
-			/* Subtract range a */
-			if (off > key.offset) {
-				datao += off - key.offset;
-				datal -= off - key.offset;
-			}
-
-			clone_info.disk_offset = disko;
-			clone_info.disk_len = diskl;
-			clone_info.data_offset = datao;
-			clone_info.data_len = datal;
-			clone_info.file_offset = new_key.offset;
-			clone_info.extent_buf = buf;
-			clone_info.item_size = size;
-			ret = btrfs_punch_hole_range(inode, path,
-						     drop_start,
-						     new_key.offset + datal - 1,
-						     &clone_info, &trans);
-			if (ret)
-				goto out;
-		} else if (type == BTRFS_FILE_EXTENT_INLINE) {
-			u64 skip = 0;
-			u64 trim = 0;
-
-			if (off > key.offset) {
-				skip = off - key.offset;
-				new_key.offset += skip;
-			}
-
-			if (key.offset + datal > off + len)
-				trim = key.offset + datal - (off + len);
-
-			if (comp && (skip || trim)) {
-				ret = -EINVAL;
-				goto out;
-			}
-			size -= skip + trim;
-			datal -= skip + trim;
-
-			/*
-			 * If our extent is inline, we know we will drop or
-			 * adjust at most 1 extent item in the destination root.
-			 *
-			 * 1 - adjusting old extent (we may have to split it)
-			 * 1 - add new extent
-			 * 1 - inode update
-			 */
-			trans = btrfs_start_transaction(root, 3);
-			if (IS_ERR(trans)) {
-				ret = PTR_ERR(trans);
-				goto out;
-			}
-
-			ret = clone_copy_inline_extent(inode, trans, path,
-						       &new_key, drop_start,
-						       datal, skip, size, buf);
-			if (ret) {
-				if (ret != -EOPNOTSUPP)
-					btrfs_abort_transaction(trans, ret);
-				btrfs_end_transaction(trans);
-				goto out;
-			}
-		}
-
-		btrfs_release_path(path);
-
-		last_dest_end = ALIGN(new_key.offset + datal,
-				      fs_info->sectorsize);
-		ret = clone_finish_inode_update(trans, inode, last_dest_end,
-						destoff, olen, no_time_update);
-		if (ret)
-			goto out;
-		if (new_key.offset + datal >= destoff + len)
-			break;
-
-		btrfs_release_path(path);
-		key.offset = next_key_min_offset;
-
-		if (fatal_signal_pending(current)) {
-			ret = -EINTR;
-			goto out;
-		}
-	}
-	ret = 0;
-
-	if (last_dest_end < destoff + len) {
-		/*
-		 * We have an implicit hole that fully or partially overlaps our
-		 * cloning range at its end. This means that we either have the
-		 * NO_HOLES feature enabled or the implicit hole happened due to
-		 * mixing buffered and direct IO writes against this file.
-		 */
-		btrfs_release_path(path);
-		path->leave_spinning = 0;
-
-		ret = btrfs_punch_hole_range(inode, path,
-					     last_dest_end, destoff + len - 1,
-					     NULL, &trans);
-		if (ret)
-			goto out;
-
-		ret = clone_finish_inode_update(trans, inode, destoff + len,
-						destoff, olen, no_time_update);
-	}
-
-out:
-	btrfs_free_path(path);
-	kvfree(buf);
-	return ret;
-}
-
-static noinline int btrfs_clone_files(struct file *file, struct file *file_src,
-					u64 off, u64 olen, u64 destoff)
-{
-	struct inode *inode = file_inode(file);
-	struct inode *src = file_inode(file_src);
-	struct btrfs_fs_info *fs_info = btrfs_sb(inode->i_sb);
-	int ret;
-	u64 len = olen;
-	u64 bs = fs_info->sb->s_blocksize;
-
-	/*
-	 * TODO:
-	 * - split compressed inline extents.  annoying: we need to
-	 *   decompress into destination's address_space (the file offset
-	 *   may change, so source mapping won't do), then recompress (or
-	 *   otherwise reinsert) a subrange.
-	 *
-	 * - split destination inode's inline extents.  The inline extents can
-	 *   be either compressed or non-compressed.
-	 */
-
-	/*
-	 * VFS's generic_remap_file_range_prep() protects us from cloning the
-	 * eof block into the middle of a file, which would result in corruption
-	 * if the file size is not blocksize aligned. So we don't need to check
-	 * for that case here.
-	 */
-	if (off + len == src->i_size)
-		len = ALIGN(src->i_size, bs) - off;
-
-	if (destoff > inode->i_size) {
-		const u64 wb_start = ALIGN_DOWN(inode->i_size, bs);
-
-		ret = btrfs_cont_expand(inode, inode->i_size, destoff);
-		if (ret)
-			return ret;
-		/*
-		 * We may have truncated the last block if the inode's size is
-		 * not sector size aligned, so we need to wait for writeback to
-		 * complete before proceeding further, otherwise we can race
-		 * with cloning and attempt to increment a reference to an
-		 * extent that no longer exists (writeback completed right after
-		 * we found the previous extent covering eof and before we
-		 * attempted to increment its reference count).
-		 */
-		ret = btrfs_wait_ordered_range(inode, wb_start,
-					       destoff - wb_start);
-		if (ret)
-			return ret;
-	}
-
-	/*
-	 * Lock destination range to serialize with concurrent readpages() and
-	 * source range to serialize with relocation.
-	 */
-	btrfs_double_extent_lock(src, off, inode, destoff, len);
-	ret = btrfs_clone(src, inode, off, olen, len, destoff, 0);
-	btrfs_double_extent_unlock(src, off, inode, destoff, len);
-	/*
-	 * Truncate page cache pages so that future reads will see the cloned
-	 * data immediately and not the previous data.
-	 */
-	truncate_inode_pages_range(&inode->i_data,
-				round_down(destoff, PAGE_SIZE),
-				round_up(destoff + len, PAGE_SIZE) - 1);
-
-	return ret;
-}
-
-static int btrfs_remap_file_range_prep(struct file *file_in, loff_t pos_in,
-				       struct file *file_out, loff_t pos_out,
-				       loff_t *len, unsigned int remap_flags)
-{
-	struct inode *inode_in = file_inode(file_in);
-	struct inode *inode_out = file_inode(file_out);
-	u64 bs = BTRFS_I(inode_out)->root->fs_info->sb->s_blocksize;
-	bool same_inode = inode_out == inode_in;
-	u64 wb_len;
-	int ret;
-
-	if (!(remap_flags & REMAP_FILE_DEDUP)) {
-		struct btrfs_root *root_out = BTRFS_I(inode_out)->root;
-
-		if (btrfs_root_readonly(root_out))
-			return -EROFS;
-
-		if (file_in->f_path.mnt != file_out->f_path.mnt ||
-		    inode_in->i_sb != inode_out->i_sb)
-			return -EXDEV;
-	}
-
-	/* don't make the dst file partly checksummed */
-	if ((BTRFS_I(inode_in)->flags & BTRFS_INODE_NODATASUM) !=
-	    (BTRFS_I(inode_out)->flags & BTRFS_INODE_NODATASUM)) {
-		return -EINVAL;
-	}
-
-	/*
-	 * Now that the inodes are locked, we need to start writeback ourselves
-	 * and can not rely on the writeback from the VFS's generic helper
-	 * generic_remap_file_range_prep() because:
-	 *
-	 * 1) For compression we must call filemap_fdatawrite_range() range
-	 *    twice (btrfs_fdatawrite_range() does it for us), and the generic
-	 *    helper only calls it once;
-	 *
-	 * 2) filemap_fdatawrite_range(), called by the generic helper only
-	 *    waits for the writeback to complete, i.e. for IO to be done, and
-	 *    not for the ordered extents to complete. We need to wait for them
-	 *    to complete so that new file extent items are in the fs tree.
-	 */
-	if (*len == 0 && !(remap_flags & REMAP_FILE_DEDUP))
-		wb_len = ALIGN(inode_in->i_size, bs) - ALIGN_DOWN(pos_in, bs);
-	else
-		wb_len = ALIGN(*len, bs);
-
-	/*
-	 * Since we don't lock ranges, wait for ongoing lockless dio writes (as
-	 * any in progress could create its ordered extents after we wait for
-	 * existing ordered extents below).
-	 */
-	inode_dio_wait(inode_in);
-	if (!same_inode)
-		inode_dio_wait(inode_out);
-
-	/*
-	 * Workaround to make sure NOCOW buffered write reach disk as NOCOW.
-	 *
-	 * Btrfs' back references do not have a block level granularity, they
-	 * work at the whole extent level.
-	 * NOCOW buffered write without data space reserved may not be able
-	 * to fall back to CoW due to lack of data space, thus could cause
-	 * data loss.
-	 *
-	 * Here we take a shortcut by flushing the whole inode, so that all
-	 * nocow write should reach disk as nocow before we increase the
-	 * reference of the extent. We could do better by only flushing NOCOW
-	 * data, but that needs extra accounting.
-	 *
-	 * Also we don't need to check ASYNC_EXTENT, as async extent will be
-	 * CoWed anyway, not affecting nocow part.
-	 */
-	ret = filemap_flush(inode_in->i_mapping);
-	if (ret < 0)
-		return ret;
-
-	ret = btrfs_wait_ordered_range(inode_in, ALIGN_DOWN(pos_in, bs),
-				       wb_len);
-	if (ret < 0)
-		return ret;
-	ret = btrfs_wait_ordered_range(inode_out, ALIGN_DOWN(pos_out, bs),
-				       wb_len);
-	if (ret < 0)
-		return ret;
-
-	return generic_remap_file_range_prep(file_in, pos_in, file_out, pos_out,
-					    len, remap_flags);
-}
-
-loff_t btrfs_remap_file_range(struct file *src_file, loff_t off,
-		struct file *dst_file, loff_t destoff, loff_t len,
-		unsigned int remap_flags)
-{
-	struct inode *src_inode = file_inode(src_file);
-	struct inode *dst_inode = file_inode(dst_file);
-	bool same_inode = dst_inode == src_inode;
-	int ret;
-
-	if (remap_flags & ~(REMAP_FILE_DEDUP | REMAP_FILE_ADVISORY))
-		return -EINVAL;
-
-	if (same_inode)
-		inode_lock(src_inode);
-	else
-		lock_two_nondirectories(src_inode, dst_inode);
-
-	ret = btrfs_remap_file_range_prep(src_file, off, dst_file, destoff,
-					  &len, remap_flags);
-	if (ret < 0 || len == 0)
-		goto out_unlock;
-
-	if (remap_flags & REMAP_FILE_DEDUP)
-		ret = btrfs_extent_same(src_inode, off, len, dst_inode, destoff);
-	else
-		ret = btrfs_clone_files(dst_file, src_file, off, len, destoff);
-
-out_unlock:
-	if (same_inode)
-		inode_unlock(src_inode);
-	else
-		unlock_two_nondirectories(src_inode, dst_inode);
-
-	return ret < 0 ? ret : len;
-}
-
 static long btrfs_ioctl_default_subvol(struct file *file, void __user *argp)
 {
 	struct inode *inode = file_inode(file);
diff --git a/fs/btrfs/reflink.c b/fs/btrfs/reflink.c
new file mode 100644
index 000000000000..deecb1580e8e
--- /dev/null
+++ b/fs/btrfs/reflink.c
@@ -0,0 +1,736 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <linux/iversion.h>
+#include "ctree.h"
+#include "reflink.h"
+#include "transaction.h"
+
+#define BTRFS_MAX_DEDUPE_LEN	SZ_16M
+
+
+static int clone_finish_inode_update(struct btrfs_trans_handle *trans,
+				     struct inode *inode,
+				     u64 endoff,
+				     const u64 destoff,
+				     const u64 olen,
+				     int no_time_update)
+{
+	struct btrfs_root *root = BTRFS_I(inode)->root;
+	int ret;
+
+	inode_inc_iversion(inode);
+	if (!no_time_update)
+		inode->i_mtime = inode->i_ctime = current_time(inode);
+	/*
+	 * We round up to the block size at eof when determining which
+	 * extents to clone above, but shouldn't round up the file size.
+	 */
+	if (endoff > destoff + olen)
+		endoff = destoff + olen;
+	if (endoff > inode->i_size) {
+		i_size_write(inode, endoff);
+		btrfs_inode_safe_disk_i_size_write(inode, 0);
+	}
+
+	ret = btrfs_update_inode(trans, root, inode);
+	if (ret) {
+		btrfs_abort_transaction(trans, ret);
+		btrfs_end_transaction(trans);
+		goto out;
+	}
+	ret = btrfs_end_transaction(trans);
+out:
+	return ret;
+}
+
+/*
+ * Make sure we do not end up inserting an inline extent into a file that has
+ * already other (non-inline) extents. If a file has an inline extent it can
+ * not have any other extents and the (single) inline extent must start at the
+ * file offset 0. Failing to respect these rules will lead to file corruption,
+ * resulting in EIO errors on read/write operations, hitting BUG_ON's in mm, etc
+ *
+ * We can have extents that have been already written to disk or we can have
+ * dirty ranges still in delalloc, in which case the extent maps and items are
+ * created only when we run delalloc, and the delalloc ranges might fall outside
+ * the range we are currently locking in the inode's io tree. So we check the
+ * inode's i_size because of that (i_size updates are done while holding the
+ * i_mutex, which we are holding here).
+ * We also check to see if the inode has a size not greater than "datal" but has
+ * extents beyond it, due to an fallocate with FALLOC_FL_KEEP_SIZE (and we are
+ * protected against such concurrent fallocate calls by the i_mutex).
+ *
+ * If the file has no extents but a size greater than datal, do not allow the
+ * copy because we would need turn the inline extent into a non-inline one (even
+ * with NO_HOLES enabled). If we find our destination inode only has one inline
+ * extent, just overwrite it with the source inline extent if its size is less
+ * than the source extent's size, or we could copy the source inline extent's
+ * data into the destination inode's inline extent if the later is greater then
+ * the former.
+ */
+static int clone_copy_inline_extent(struct inode *dst,
+				    struct btrfs_trans_handle *trans,
+				    struct btrfs_path *path,
+				    struct btrfs_key *new_key,
+				    const u64 drop_start,
+				    const u64 datal,
+				    const u64 skip,
+				    const u64 size,
+				    char *inline_data)
+{
+	struct btrfs_fs_info *fs_info = btrfs_sb(dst->i_sb);
+	struct btrfs_root *root = BTRFS_I(dst)->root;
+	const u64 aligned_end = ALIGN(new_key->offset + datal,
+				      fs_info->sectorsize);
+	int ret;
+	struct btrfs_key key;
+
+	if (new_key->offset > 0)
+		return -EOPNOTSUPP;
+
+	key.objectid = btrfs_ino(BTRFS_I(dst));
+	key.type = BTRFS_EXTENT_DATA_KEY;
+	key.offset = 0;
+	ret = btrfs_search_slot(NULL, root, &key, path, 0, 0);
+	if (ret < 0) {
+		return ret;
+	} else if (ret > 0) {
+		if (path->slots[0] >= btrfs_header_nritems(path->nodes[0])) {
+			ret = btrfs_next_leaf(root, path);
+			if (ret < 0)
+				return ret;
+			else if (ret > 0)
+				goto copy_inline_extent;
+		}
+		btrfs_item_key_to_cpu(path->nodes[0], &key, path->slots[0]);
+		if (key.objectid == btrfs_ino(BTRFS_I(dst)) &&
+		    key.type == BTRFS_EXTENT_DATA_KEY) {
+			ASSERT(key.offset > 0);
+			return -EOPNOTSUPP;
+		}
+	} else if (i_size_read(dst) <= datal) {
+		struct btrfs_file_extent_item *ei;
+		u64 ext_len;
+
+		/*
+		 * If the file size is <= datal, make sure there are no other
+		 * extents following (can happen do to an fallocate call with
+		 * the flag FALLOC_FL_KEEP_SIZE).
+		 */
+		ei = btrfs_item_ptr(path->nodes[0], path->slots[0],
+				    struct btrfs_file_extent_item);
+		/*
+		 * If it's an inline extent, it can not have other extents
+		 * following it.
+		 */
+		if (btrfs_file_extent_type(path->nodes[0], ei) ==
+		    BTRFS_FILE_EXTENT_INLINE)
+			goto copy_inline_extent;
+
+		ext_len = btrfs_file_extent_num_bytes(path->nodes[0], ei);
+		if (ext_len > aligned_end)
+			return -EOPNOTSUPP;
+
+		ret = btrfs_next_item(root, path);
+		if (ret < 0) {
+			return ret;
+		} else if (ret == 0) {
+			btrfs_item_key_to_cpu(path->nodes[0], &key,
+					      path->slots[0]);
+			if (key.objectid == btrfs_ino(BTRFS_I(dst)) &&
+			    key.type == BTRFS_EXTENT_DATA_KEY)
+				return -EOPNOTSUPP;
+		}
+	}
+
+copy_inline_extent:
+	/*
+	 * We have no extent items, or we have an extent at offset 0 which may
+	 * or may not be inlined. All these cases are dealt the same way.
+	 */
+	if (i_size_read(dst) > datal) {
+		/*
+		 * If the destination inode has an inline extent...
+		 * This would require copying the data from the source inline
+		 * extent into the beginning of the destination's inline extent.
+		 * But this is really complex, both extents can be compressed
+		 * or just one of them, which would require decompressing and
+		 * re-compressing data (which could increase the new compressed
+		 * size, not allowing the compressed data to fit anymore in an
+		 * inline extent).
+		 * So just don't support this case for now (it should be rare,
+		 * we are not really saving space when cloning inline extents).
+		 */
+		return -EOPNOTSUPP;
+	}
+
+	btrfs_release_path(path);
+	ret = btrfs_drop_extents(trans, root, dst, drop_start, aligned_end, 1);
+	if (ret)
+		return ret;
+	ret = btrfs_insert_empty_item(trans, root, path, new_key, size);
+	if (ret)
+		return ret;
+
+	if (skip) {
+		const u32 start = btrfs_file_extent_calc_inline_size(0);
+
+		memmove(inline_data + start, inline_data + start + skip, datal);
+	}
+
+	write_extent_buffer(path->nodes[0], inline_data,
+			    btrfs_item_ptr_offset(path->nodes[0],
+						  path->slots[0]),
+			    size);
+	inode_add_bytes(dst, datal);
+	set_bit(BTRFS_INODE_NEEDS_FULL_SYNC, &BTRFS_I(dst)->runtime_flags);
+
+	return 0;
+}
+
+/**
+ * btrfs_clone() - clone a range from inode file to another
+ *
+ * @src: Inode to clone from
+ * @inode: Inode to clone to
+ * @off: Offset within source to start clone from
+ * @olen: Original length, passed by user, of range to clone
+ * @olen_aligned: Block-aligned value of olen
+ * @destoff: Offset within @inode to start clone
+ * @no_time_update: Whether to update mtime/ctime on the target inode
+ */
+static int btrfs_clone(struct inode *src, struct inode *inode,
+		       const u64 off, const u64 olen, const u64 olen_aligned,
+		       const u64 destoff, int no_time_update)
+{
+	struct btrfs_fs_info *fs_info = btrfs_sb(inode->i_sb);
+	struct btrfs_root *root = BTRFS_I(inode)->root;
+	struct btrfs_path *path = NULL;
+	struct extent_buffer *leaf;
+	struct btrfs_trans_handle *trans;
+	char *buf = NULL;
+	struct btrfs_key key;
+	u32 nritems;
+	int slot;
+	int ret;
+	const u64 len = olen_aligned;
+	u64 last_dest_end = destoff;
+
+	ret = -ENOMEM;
+	buf = kvmalloc(fs_info->nodesize, GFP_KERNEL);
+	if (!buf)
+		return ret;
+
+	path = btrfs_alloc_path();
+	if (!path) {
+		kvfree(buf);
+		return ret;
+	}
+
+	path->reada = READA_FORWARD;
+	/* clone data */
+	key.objectid = btrfs_ino(BTRFS_I(src));
+	key.type = BTRFS_EXTENT_DATA_KEY;
+	key.offset = off;
+
+	while (1) {
+		u64 next_key_min_offset = key.offset + 1;
+		struct btrfs_file_extent_item *extent;
+		int type;
+		u32 size;
+		struct btrfs_key new_key;
+		u64 disko = 0, diskl = 0;
+		u64 datao = 0, datal = 0;
+		u8 comp;
+		u64 drop_start;
+
+		/*
+		 * note the key will change type as we walk through the
+		 * tree.
+		 */
+		path->leave_spinning = 1;
+		ret = btrfs_search_slot(NULL, BTRFS_I(src)->root, &key, path,
+				0, 0);
+		if (ret < 0)
+			goto out;
+		/*
+		 * First search, if no extent item that starts at offset off was
+		 * found but the previous item is an extent item, it's possible
+		 * it might overlap our target range, therefore process it.
+		 */
+		if (key.offset == off && ret > 0 && path->slots[0] > 0) {
+			btrfs_item_key_to_cpu(path->nodes[0], &key,
+					      path->slots[0] - 1);
+			if (key.type == BTRFS_EXTENT_DATA_KEY)
+				path->slots[0]--;
+		}
+
+		nritems = btrfs_header_nritems(path->nodes[0]);
+process_slot:
+		if (path->slots[0] >= nritems) {
+			ret = btrfs_next_leaf(BTRFS_I(src)->root, path);
+			if (ret < 0)
+				goto out;
+			if (ret > 0)
+				break;
+			nritems = btrfs_header_nritems(path->nodes[0]);
+		}
+		leaf = path->nodes[0];
+		slot = path->slots[0];
+
+		btrfs_item_key_to_cpu(leaf, &key, slot);
+		if (key.type > BTRFS_EXTENT_DATA_KEY ||
+		    key.objectid != btrfs_ino(BTRFS_I(src)))
+			break;
+
+		ASSERT(key.type == BTRFS_EXTENT_DATA_KEY);
+
+		extent = btrfs_item_ptr(leaf, slot,
+					struct btrfs_file_extent_item);
+		comp = btrfs_file_extent_compression(leaf, extent);
+		type = btrfs_file_extent_type(leaf, extent);
+		if (type == BTRFS_FILE_EXTENT_REG ||
+		    type == BTRFS_FILE_EXTENT_PREALLOC) {
+			disko = btrfs_file_extent_disk_bytenr(leaf, extent);
+			diskl = btrfs_file_extent_disk_num_bytes(leaf, extent);
+			datao = btrfs_file_extent_offset(leaf, extent);
+			datal = btrfs_file_extent_num_bytes(leaf, extent);
+		} else if (type == BTRFS_FILE_EXTENT_INLINE) {
+			/* Take upper bound, may be compressed */
+			datal = btrfs_file_extent_ram_bytes(leaf, extent);
+		}
+
+		/*
+		 * The first search might have left us at an extent item that
+		 * ends before our target range's start, can happen if we have
+		 * holes and NO_HOLES feature enabled.
+		 */
+		if (key.offset + datal <= off) {
+			path->slots[0]++;
+			goto process_slot;
+		} else if (key.offset >= off + len) {
+			break;
+		}
+		next_key_min_offset = key.offset + datal;
+		size = btrfs_item_size_nr(leaf, slot);
+		read_extent_buffer(leaf, buf, btrfs_item_ptr_offset(leaf, slot),
+				   size);
+
+		btrfs_release_path(path);
+		path->leave_spinning = 0;
+
+		memcpy(&new_key, &key, sizeof(new_key));
+		new_key.objectid = btrfs_ino(BTRFS_I(inode));
+		if (off <= key.offset)
+			new_key.offset = key.offset + destoff - off;
+		else
+			new_key.offset = destoff;
+
+		/*
+		 * Deal with a hole that doesn't have an extent item that
+		 * represents it (NO_HOLES feature enabled).
+		 * This hole is either in the middle of the cloning range or at
+		 * the beginning (fully overlaps it or partially overlaps it).
+		 */
+		if (new_key.offset != last_dest_end)
+			drop_start = last_dest_end;
+		else
+			drop_start = new_key.offset;
+
+		if (type == BTRFS_FILE_EXTENT_REG ||
+		    type == BTRFS_FILE_EXTENT_PREALLOC) {
+			struct btrfs_clone_extent_info clone_info;
+
+			/*
+			 *    a  | --- range to clone ---|  b
+			 * | ------------- extent ------------- |
+			 */
+
+			/* Subtract range b */
+			if (key.offset + datal > off + len)
+				datal = off + len - key.offset;
+
+			/* Subtract range a */
+			if (off > key.offset) {
+				datao += off - key.offset;
+				datal -= off - key.offset;
+			}
+
+			clone_info.disk_offset = disko;
+			clone_info.disk_len = diskl;
+			clone_info.data_offset = datao;
+			clone_info.data_len = datal;
+			clone_info.file_offset = new_key.offset;
+			clone_info.extent_buf = buf;
+			clone_info.item_size = size;
+			ret = btrfs_punch_hole_range(inode, path,
+						     drop_start,
+						     new_key.offset + datal - 1,
+						     &clone_info, &trans);
+			if (ret)
+				goto out;
+		} else if (type == BTRFS_FILE_EXTENT_INLINE) {
+			u64 skip = 0;
+			u64 trim = 0;
+
+			if (off > key.offset) {
+				skip = off - key.offset;
+				new_key.offset += skip;
+			}
+
+			if (key.offset + datal > off + len)
+				trim = key.offset + datal - (off + len);
+
+			if (comp && (skip || trim)) {
+				ret = -EINVAL;
+				goto out;
+			}
+			size -= skip + trim;
+			datal -= skip + trim;
+
+			/*
+			 * If our extent is inline, we know we will drop or
+			 * adjust at most 1 extent item in the destination root.
+			 *
+			 * 1 - adjusting old extent (we may have to split it)
+			 * 1 - add new extent
+			 * 1 - inode update
+			 */
+			trans = btrfs_start_transaction(root, 3);
+			if (IS_ERR(trans)) {
+				ret = PTR_ERR(trans);
+				goto out;
+			}
+
+			ret = clone_copy_inline_extent(inode, trans, path,
+						       &new_key, drop_start,
+						       datal, skip, size, buf);
+			if (ret) {
+				if (ret != -EOPNOTSUPP)
+					btrfs_abort_transaction(trans, ret);
+				btrfs_end_transaction(trans);
+				goto out;
+			}
+		}
+
+		btrfs_release_path(path);
+
+		last_dest_end = ALIGN(new_key.offset + datal,
+				      fs_info->sectorsize);
+		ret = clone_finish_inode_update(trans, inode, last_dest_end,
+						destoff, olen, no_time_update);
+		if (ret)
+			goto out;
+		if (new_key.offset + datal >= destoff + len)
+			break;
+
+		btrfs_release_path(path);
+		key.offset = next_key_min_offset;
+
+		if (fatal_signal_pending(current)) {
+			ret = -EINTR;
+			goto out;
+		}
+	}
+	ret = 0;
+
+	if (last_dest_end < destoff + len) {
+		/*
+		 * We have an implicit hole that fully or partially overlaps our
+		 * cloning range at its end. This means that we either have the
+		 * NO_HOLES feature enabled or the implicit hole happened due to
+		 * mixing buffered and direct IO writes against this file.
+		 */
+		btrfs_release_path(path);
+		path->leave_spinning = 0;
+
+		ret = btrfs_punch_hole_range(inode, path,
+					     last_dest_end, destoff + len - 1,
+					     NULL, &trans);
+		if (ret)
+			goto out;
+
+		ret = clone_finish_inode_update(trans, inode, destoff + len,
+						destoff, olen, no_time_update);
+	}
+
+out:
+	btrfs_free_path(path);
+	kvfree(buf);
+	return ret;
+}
+
+static void btrfs_double_extent_unlock(struct inode *inode1, u64 loff1,
+				       struct inode *inode2, u64 loff2, u64 len)
+{
+	unlock_extent(&BTRFS_I(inode1)->io_tree, loff1, loff1 + len - 1);
+	unlock_extent(&BTRFS_I(inode2)->io_tree, loff2, loff2 + len - 1);
+}
+
+static void btrfs_double_extent_lock(struct inode *inode1, u64 loff1,
+				     struct inode *inode2, u64 loff2, u64 len)
+{
+	if (inode1 < inode2) {
+		swap(inode1, inode2);
+		swap(loff1, loff2);
+	} else if (inode1 == inode2 && loff2 < loff1) {
+		swap(loff1, loff2);
+	}
+	lock_extent(&BTRFS_I(inode1)->io_tree, loff1, loff1 + len - 1);
+	lock_extent(&BTRFS_I(inode2)->io_tree, loff2, loff2 + len - 1);
+}
+
+static int btrfs_extent_same_range(struct inode *src, u64 loff, u64 len,
+				   struct inode *dst, u64 dst_loff)
+{
+	const u64 bs = BTRFS_I(src)->root->fs_info->sb->s_blocksize;
+	int ret;
+
+	/*
+	 * Lock destination range to serialize with concurrent readpages() and
+	 * source range to serialize with relocation.
+	 */
+	btrfs_double_extent_lock(src, loff, dst, dst_loff, len);
+	ret = btrfs_clone(src, dst, loff, len, ALIGN(len, bs), dst_loff, 1);
+	btrfs_double_extent_unlock(src, loff, dst, dst_loff, len);
+
+	return ret;
+}
+
+static int btrfs_extent_same(struct inode *src, u64 loff, u64 olen,
+			     struct inode *dst, u64 dst_loff)
+{
+	int ret;
+	u64 i, tail_len, chunk_count;
+	struct btrfs_root *root_dst = BTRFS_I(dst)->root;
+
+	spin_lock(&root_dst->root_item_lock);
+	if (root_dst->send_in_progress) {
+		btrfs_warn_rl(root_dst->fs_info,
+"cannot deduplicate to root %llu while send operations are using it (%d in progress)",
+			      root_dst->root_key.objectid,
+			      root_dst->send_in_progress);
+		spin_unlock(&root_dst->root_item_lock);
+		return -EAGAIN;
+	}
+	root_dst->dedupe_in_progress++;
+	spin_unlock(&root_dst->root_item_lock);
+
+	tail_len = olen % BTRFS_MAX_DEDUPE_LEN;
+	chunk_count = div_u64(olen, BTRFS_MAX_DEDUPE_LEN);
+
+	for (i = 0; i < chunk_count; i++) {
+		ret = btrfs_extent_same_range(src, loff, BTRFS_MAX_DEDUPE_LEN,
+					      dst, dst_loff);
+		if (ret)
+			goto out;
+
+		loff += BTRFS_MAX_DEDUPE_LEN;
+		dst_loff += BTRFS_MAX_DEDUPE_LEN;
+	}
+
+	if (tail_len > 0)
+		ret = btrfs_extent_same_range(src, loff, tail_len, dst,
+					      dst_loff);
+out:
+	spin_lock(&root_dst->root_item_lock);
+	root_dst->dedupe_in_progress--;
+	spin_unlock(&root_dst->root_item_lock);
+
+	return ret;
+}
+
+static noinline int btrfs_clone_files(struct file *file, struct file *file_src,
+					u64 off, u64 olen, u64 destoff)
+{
+	struct inode *inode = file_inode(file);
+	struct inode *src = file_inode(file_src);
+	struct btrfs_fs_info *fs_info = btrfs_sb(inode->i_sb);
+	int ret;
+	u64 len = olen;
+	u64 bs = fs_info->sb->s_blocksize;
+
+	/*
+	 * TODO:
+	 * - split compressed inline extents.  annoying: we need to
+	 *   decompress into destination's address_space (the file offset
+	 *   may change, so source mapping won't do), then recompress (or
+	 *   otherwise reinsert) a subrange.
+	 *
+	 * - split destination inode's inline extents.  The inline extents can
+	 *   be either compressed or non-compressed.
+	 */
+
+	/*
+	 * VFS's generic_remap_file_range_prep() protects us from cloning the
+	 * eof block into the middle of a file, which would result in corruption
+	 * if the file size is not blocksize aligned. So we don't need to check
+	 * for that case here.
+	 */
+	if (off + len == src->i_size)
+		len = ALIGN(src->i_size, bs) - off;
+
+	if (destoff > inode->i_size) {
+		const u64 wb_start = ALIGN_DOWN(inode->i_size, bs);
+
+		ret = btrfs_cont_expand(inode, inode->i_size, destoff);
+		if (ret)
+			return ret;
+		/*
+		 * We may have truncated the last block if the inode's size is
+		 * not sector size aligned, so we need to wait for writeback to
+		 * complete before proceeding further, otherwise we can race
+		 * with cloning and attempt to increment a reference to an
+		 * extent that no longer exists (writeback completed right after
+		 * we found the previous extent covering eof and before we
+		 * attempted to increment its reference count).
+		 */
+		ret = btrfs_wait_ordered_range(inode, wb_start,
+					       destoff - wb_start);
+		if (ret)
+			return ret;
+	}
+
+	/*
+	 * Lock destination range to serialize with concurrent readpages() and
+	 * source range to serialize with relocation.
+	 */
+	btrfs_double_extent_lock(src, off, inode, destoff, len);
+	ret = btrfs_clone(src, inode, off, olen, len, destoff, 0);
+	btrfs_double_extent_unlock(src, off, inode, destoff, len);
+	/*
+	 * Truncate page cache pages so that future reads will see the cloned
+	 * data immediately and not the previous data.
+	 */
+	truncate_inode_pages_range(&inode->i_data,
+				round_down(destoff, PAGE_SIZE),
+				round_up(destoff + len, PAGE_SIZE) - 1);
+
+	return ret;
+}
+
+static int btrfs_remap_file_range_prep(struct file *file_in, loff_t pos_in,
+				       struct file *file_out, loff_t pos_out,
+				       loff_t *len, unsigned int remap_flags)
+{
+	struct inode *inode_in = file_inode(file_in);
+	struct inode *inode_out = file_inode(file_out);
+	u64 bs = BTRFS_I(inode_out)->root->fs_info->sb->s_blocksize;
+	bool same_inode = inode_out == inode_in;
+	u64 wb_len;
+	int ret;
+
+	if (!(remap_flags & REMAP_FILE_DEDUP)) {
+		struct btrfs_root *root_out = BTRFS_I(inode_out)->root;
+
+		if (btrfs_root_readonly(root_out))
+			return -EROFS;
+
+		if (file_in->f_path.mnt != file_out->f_path.mnt ||
+		    inode_in->i_sb != inode_out->i_sb)
+			return -EXDEV;
+	}
+
+	/* don't make the dst file partly checksummed */
+	if ((BTRFS_I(inode_in)->flags & BTRFS_INODE_NODATASUM) !=
+	    (BTRFS_I(inode_out)->flags & BTRFS_INODE_NODATASUM)) {
+		return -EINVAL;
+	}
+
+	/*
+	 * Now that the inodes are locked, we need to start writeback ourselves
+	 * and can not rely on the writeback from the VFS's generic helper
+	 * generic_remap_file_range_prep() because:
+	 *
+	 * 1) For compression we must call filemap_fdatawrite_range() range
+	 *    twice (btrfs_fdatawrite_range() does it for us), and the generic
+	 *    helper only calls it once;
+	 *
+	 * 2) filemap_fdatawrite_range(), called by the generic helper only
+	 *    waits for the writeback to complete, i.e. for IO to be done, and
+	 *    not for the ordered extents to complete. We need to wait for them
+	 *    to complete so that new file extent items are in the fs tree.
+	 */
+	if (*len == 0 && !(remap_flags & REMAP_FILE_DEDUP))
+		wb_len = ALIGN(inode_in->i_size, bs) - ALIGN_DOWN(pos_in, bs);
+	else
+		wb_len = ALIGN(*len, bs);
+
+	/*
+	 * Since we don't lock ranges, wait for ongoing lockless dio writes (as
+	 * any in progress could create its ordered extents after we wait for
+	 * existing ordered extents below).
+	 */
+	inode_dio_wait(inode_in);
+	if (!same_inode)
+		inode_dio_wait(inode_out);
+
+	/*
+	 * Workaround to make sure NOCOW buffered write reach disk as NOCOW.
+	 *
+	 * Btrfs' back references do not have a block level granularity, they
+	 * work at the whole extent level.
+	 * NOCOW buffered write without data space reserved may not be able
+	 * to fall back to CoW due to lack of data space, thus could cause
+	 * data loss.
+	 *
+	 * Here we take a shortcut by flushing the whole inode, so that all
+	 * nocow write should reach disk as nocow before we increase the
+	 * reference of the extent. We could do better by only flushing NOCOW
+	 * data, but that needs extra accounting.
+	 *
+	 * Also we don't need to check ASYNC_EXTENT, as async extent will be
+	 * CoWed anyway, not affecting nocow part.
+	 */
+	ret = filemap_flush(inode_in->i_mapping);
+	if (ret < 0)
+		return ret;
+
+	ret = btrfs_wait_ordered_range(inode_in, ALIGN_DOWN(pos_in, bs),
+				       wb_len);
+	if (ret < 0)
+		return ret;
+	ret = btrfs_wait_ordered_range(inode_out, ALIGN_DOWN(pos_out, bs),
+				       wb_len);
+	if (ret < 0)
+		return ret;
+
+	return generic_remap_file_range_prep(file_in, pos_in, file_out, pos_out,
+					    len, remap_flags);
+}
+
+loff_t btrfs_remap_file_range(struct file *src_file, loff_t off,
+		struct file *dst_file, loff_t destoff, loff_t len,
+		unsigned int remap_flags)
+{
+	struct inode *src_inode = file_inode(src_file);
+	struct inode *dst_inode = file_inode(dst_file);
+	bool same_inode = dst_inode == src_inode;
+	int ret;
+
+	if (remap_flags & ~(REMAP_FILE_DEDUP | REMAP_FILE_ADVISORY))
+		return -EINVAL;
+
+	if (same_inode)
+		inode_lock(src_inode);
+	else
+		lock_two_nondirectories(src_inode, dst_inode);
+
+	ret = btrfs_remap_file_range_prep(src_file, off, dst_file, destoff,
+					  &len, remap_flags);
+	if (ret < 0 || len == 0)
+		goto out_unlock;
+
+	if (remap_flags & REMAP_FILE_DEDUP)
+		ret = btrfs_extent_same(src_inode, off, len, dst_inode, destoff);
+	else
+		ret = btrfs_clone_files(dst_file, src_file, off, len, destoff);
+
+out_unlock:
+	if (same_inode)
+		inode_unlock(src_inode);
+	else
+		unlock_two_nondirectories(src_inode, dst_inode);
+
+	return ret < 0 ? ret : len;
+}
diff --git a/fs/btrfs/reflink.h b/fs/btrfs/reflink.h
new file mode 100644
index 000000000000..ecb309b4dad0
--- /dev/null
+++ b/fs/btrfs/reflink.h
@@ -0,0 +1,12 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef BTRFS_REFLINK_H
+#define BTRFS_REFLINK_H
+
+#include <linux/fs.h>
+
+loff_t btrfs_remap_file_range(struct file *file_in, loff_t pos_in,
+			      struct file *file_out, loff_t pos_out,
+			      loff_t len, unsigned int remap_flags);
+
+#endif /* BTRFS_REFLINK_H */
