diff mbox

[3/3,V3] xfstests: btrfs tests for basic informational commands

Message ID 5140CB3F.5010704@redhat.com
State Not Applicable
Headers show

Commit Message

Eric Sandeen March 13, 2013, 6:53 p.m. UTC
Run basic btrfs information commands in various ways, performing
sanity tests of: filesystem show, label, sync, and device stats
(sync is included just because it's simple).  These are mostly
just smoke tests, although for example show by label & UUID
should verify that the correct fs was shown.

This also adds quite a few new filters to accommodate the output
of the new commands.

Cc: linux-btrfs@vger.kernel.org
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
---

V2: sort & uniq device stats output to account for variable
nrs. of devices.  Optionally check that the proper nr. of
devices was returned, as well.

V3: _filter_uuid needs to pay attention to $1, not hope
that the caller has set $UUID.  Oops.


--
To unsubscribe from this list: send the line "unsubscribe linux-btrfs" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Comments

Stefan Behrens March 13, 2013, 7 p.m. UTC | #1
On Wed, 13 Mar 2013 13:53:51 -0500, Eric Sandeen wrote:
> Run basic btrfs information commands in various ways, performing
> sanity tests of: filesystem show, label, sync, and device stats
> (sync is included just because it's simple).  These are mostly
> just smoke tests, although for example show by label & UUID
> should verify that the correct fs was shown.
> 
> This also adds quite a few new filters to accommodate the output
> of the new commands.
> 
> Cc: linux-btrfs@vger.kernel.org
> Signed-off-by: Eric Sandeen <sandeen@redhat.com>
> ---
> 
> V2: sort & uniq device stats output to account for variable
> nrs. of devices.  Optionally check that the proper nr. of
> devices was returned, as well.
> 
> V3: _filter_uuid needs to pay attention to $1, not hope
> that the caller has set $UUID.  Oops.
> 
> diff --git a/313 b/313
> new file mode 100755
> index 0000000..579b0d3
> --- /dev/null
> +++ b/313
> @@ -0,0 +1,96 @@
> +#! /bin/bash
> +# FS QA Test No. 313
> +#
> +# run basic btrfs information commands in various ways
> +# sanity tests: filesystem show, label, sync, and device stats
> +#
> +#-----------------------------------------------------------------------
> +# Copyright (c) 2013 Red Hat, Inc.  All Rights Reserved.
> +#
> +# This program is free software; you can redistribute it and/or
> +# modify it under the terms of the GNU General Public License as
> +# published by the Free Software Foundation.
> +#
> +# This program is distributed in the hope that it would be useful,
> +# but WITHOUT ANY WARRANTY; without even the implied warranty of
> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> +# GNU General Public License for more details.
> +#
> +# You should have received a copy of the GNU General Public License
> +# along with this program; if not, write the Free Software Foundation,
> +# Inc.,  51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
> +#-----------------------------------------------------------------------
> +#
> +# creator
> +owner=sandeen@redhat.com
> +
> +seq=`basename $0`
> +echo "== QA output created by $seq"
> +
> +here=`pwd`
> +tmp=/tmp/$$
> +status=1	# failure is the default!
> +trap "_cleanup; exit \$status" 0 1 2 3 15
> +
> +_cleanup()
> +{
> +    cd /
> +    rm -f $tmp.*
> +}
> +
> +# get standard environment, filters and checks
> +. ./common.rc
> +. ./btrfs.filter
> +
> +# real QA test starts here
> +
> +# Modify as appropriate.
> +_supported_fs btrfs
> +_supported_os Linux
> +_require_scratch
> +_require_scratch_dev_pool
> +
> +rm -f $seq.full
> +
> +FIRST_POOL_DEV=`echo $SCRATCH_DEV_POOL | awk '{print $1}'`
> +LAST_POOL_DEV=`echo $SCRATCH_DEV_POOL | awk '{print $NF}'`
> +TOTAL_DEVS=`echo $SCRATCH_DEV $SCRATCH_DEV_POOL | wc -w`
> +LABEL=TestLabel.$seq
> +
> +echo "Scratch $SCRATCH_DEV First $FIRST_POOL_DEV last $LAST_POOL_DEV Total $TOTAL_DEVS" > $seq.full
> +
> +_scratch_mkfs $SCRATCH_DEV_POOL >> $seq.full 2>&1 || _fail "mkfs failed"
> +
> +# These have to be done unmounted...?
> +echo "== Set filesystem label to $LABEL"
> +$BTRFS_UTIL_PROG filesystem label $SCRATCH_DEV $LABEL
> +echo "== Get filesystem label"
> +$BTRFS_UTIL_PROG filesystem label $SCRATCH_DEV
> +
> +echo "== Mount."
> +_scratch_mount
> +
> +echo "== Show filesystem by label"
> +$BTRFS_UTIL_PROG filesystem show $LABEL | _filter_btrfs_filesystem_show $TOTAL_DEVS
> +UUID=`$BTRFS_UTIL_PROG filesystem show $LABEL | grep uuid: | awk '{print $NF}'`
> +
> +echo "UUID $UUID" >> $seq.full
> +
> +echo "== Show filesystem by UUID"
> +$BTRFS_UTIL_PROG filesystem show $UUID | _filter_btrfs_filesystem_show $TOTAL_DEVS $UUID
> +
> +echo "== Sync filesystem"
> +$BTRFS_UTIL_PROG filesystem sync $SCRATCH_MNT | _filter_scratch
> +
> +echo "== Show device stats by mountpoint"
> +$BTRFS_UTIL_PROG device stats $SCRATCH_MNT | _filter_btrfs_device_stats $TOTAL_DEVS
> +echo "== Show device stats by first/scratch dev"
> +$BTRFS_UTIL_PROG device stats $SCRATCH_DEV | _filter_btrfs_device_stats
> +echo "== Show device stats by second dev"
> +$BTRFS_UTIL_PROG device stats $FIRST_POOL_DEV | sed -e "s,$FIRST_POOL_DEV,FIRST_POOL_DEV,g"
> +echo "== Show device stats by last dev"
> +$BTRFS_UTIL_PROG device stats $LAST_POOL_DEV | sed -e "s,$LAST_POOL_DEV,LAST_POOL_DEV,g"
> +
> +# success, all done
> +status=0
> +exit
> diff --git a/313.out b/313.out
> new file mode 100644
> index 0000000..f513bdd
> --- /dev/null
> +++ b/313.out
> @@ -0,0 +1,41 @@
> +== QA output created by 313
> +== Set filesystem label to TestLabel.313
> +== Get filesystem label
> +TestLabel.313
> +== Mount.
> +== Show filesystem by label
> +Label: 'TestLabel.313'  uuid: <UUID>
> +	Total devices <EXACTNUM> FS bytes used <SIZE>
> +	devid     <DEVID> size <SIZE> used <SIZE> path SCRATCH_DEV
> +
> +== Show filesystem by UUID
> +Label: 'TestLabel.313'  uuid: <EXACTUUID>
> +	Total devices <EXACTNUM> FS bytes used <SIZE>
> +	devid     <DEVID> size <SIZE> used <SIZE> path SCRATCH_DEV
> +
> +== Sync filesystem
> +FSSync 'SCRATCH_MNT'
> +== Show device stats by mountpoint
> +      <NUMDEVS> [SCRATCH_DEV].corruption_errs <NUM>
> +      <NUMDEVS> [SCRATCH_DEV].flush_io_errs   <NUM>
> +      <NUMDEVS> [SCRATCH_DEV].generation_errs <NUM>
> +      <NUMDEVS> [SCRATCH_DEV].read_io_errs    <NUM>
> +      <NUMDEVS> [SCRATCH_DEV].write_io_errs   <NUM>
> +== Show device stats by first/scratch dev
> +[SCRATCH_DEV].corruption_errs <NUM>
> +[SCRATCH_DEV].flush_io_errs   <NUM>
> +[SCRATCH_DEV].generation_errs <NUM>
> +[SCRATCH_DEV].read_io_errs    <NUM>
> +[SCRATCH_DEV].write_io_errs   <NUM>
> +== Show device stats by second dev
> +[FIRST_POOL_DEV].write_io_errs   0
> +[FIRST_POOL_DEV].read_io_errs    0
> +[FIRST_POOL_DEV].flush_io_errs   0
> +[FIRST_POOL_DEV].corruption_errs 0
> +[FIRST_POOL_DEV].generation_errs 0
> +== Show device stats by last dev
> +[LAST_POOL_DEV].write_io_errs   0
> +[LAST_POOL_DEV].read_io_errs    0
> +[LAST_POOL_DEV].flush_io_errs   0
> +[LAST_POOL_DEV].corruption_errs 0
> +[LAST_POOL_DEV].generation_errs 0
> diff --git a/btrfs.filter b/btrfs.filter
> new file mode 100644
> index 0000000..8a749bf
> --- /dev/null
> +++ b/btrfs.filter
> @@ -0,0 +1,60 @@
> +# Filters for btrfs command output
> +
> +. ./common.filter
> +
> +# Some, but not all, commands emit "Btrfs <version>"
> +_filter_btrfs_version()
> +{
> +	sed -e "s/^Btrfs.*//g"
> +}
> +
> +_filter_devid()
> +{
> +	sed -e "s/\(devid\s\+\)[0-9]\+/\1 <DEVID>/g"
> +}
> +
> +# If passed a number as first arg, filter that number of devices
> +# If passed a UUID as second arg, filter that exact UUID
> +_filter_btrfs_filesystem_show()
> +{
> +	if [ ! -z $1 ]; then
> +		NUMDEVS=$1
> +		NUM_SUBST="<EXACTNUM>"
> +	else
> +		NUMDEVS="[0-9]\+"
> +		NUM_SUBST="<NUM>"
> +	fi
> +
> +	UUID=""
> +	if [ ! -z $2 ]; then
> +		UUID=$2
> +	fi
> +
> +	# the uniq collapses all device lines into 1
> +	_filter_uuid $UUID | _filter_scratch | _filter_scratch_pool | \
> +	_filter_size | _filter_btrfs_version | _filter_devid | \
> +	sed -e "s/\(Total devices\) $NUMDEVS/\1 $NUM_SUBST/g" | \
> +	uniq
> +}
> +
> +# This eliminates all numbers, and shows only unique lines,
> +# to accomodate a varying nr. of devices.
> +# If given an argument, make sure we saw that many devices
> +# in total.
> +_filter_btrfs_device_stats()
> +{
> +	if [ ! -z $1 ]; then
> +		NUMDEVS=$1
> +		UNIQ_OPT="-c"
> +	else
> +		NUMDEVS="thiswillnotmatch"
> +		UNIQ=""
> +	fi
> +
> +	_filter_scratch | _filter_scratch_pool | \
> +	sed -e "s/[0-9]\+$/<NUM>/g" | sort | uniq $UNIQ_OPT | \
> +	sed -e "s/$NUMDEVS /<NUMDEVS> /g"
> +}
> +
> +# make sure this script returns success
> +/bin/true
> diff --git a/common.filter b/common.filter
> index c854a98..c34809f 100644
> --- a/common.filter
> +++ b/common.filter
> @@ -226,6 +226,13 @@ _filter_scratch()
>  	sed -e "s,$SCRATCH_DEV,SCRATCH_DEV,g" -e "s,$SCRATCH_MNT,SCRATCH_MNT,g"
>  }
>  
> +# Turn any device in the scratch pool into SCRATCH_DEV
> +_filter_scratch_pool()
> +{
> +	FILTER_STRINGS=`echo $SCRATCH_DEV_POOL | sed -e 's/\s\+/\\\|/g'`
> +	sed -e "s,$FILTER_STRINGS,SCRATCH_DEV,g"
> +}
> +
>  _filter_spaces()
>  {
>         sed -e 's/ [ ]*/ /g'
> @@ -238,5 +245,23 @@ _filter_ln()
>  	    -e "s,failed to create,creating,"
>  }
>  
> +# If given an arg, filter *that* UUID string
> +# Otherwise look for something that looks like a generic UUID
> +_filter_uuid()
> +{
> +	if [ ! -z $1 ]; then
> +		UUID=$1
> +		sed -e "s/\(uuid:\) $UUID/\1 <EXACTUUID>/i"
> +	else
> +		sed -e "s/\(uuid:\) *[0-9a-f-][0-9a-f-]*/\1 <UUID>/i"
> +	fi
> +}
> +
> +# Filter out sizes like 6.14MB etc
> +_filter_size()
> +{
> +	sed -e "s/[0-9\.]\+\s\?[b|k|m|g|t][b]\?/<SIZE>/ig"
> +}
> +
>  # make sure this script returns success
>  /bin/true
> diff --git a/group b/group
> index 8096968..fcbdfb6 100644
> --- a/group
> +++ b/group
> @@ -429,3 +429,4 @@ stress
>  303 aio dangerous ioctl rw stress
>  304 aio dangerous ioctl rw stress
>  305 aio dangerous enospc rw stress
> +313 auto quick
> 

Reviewed-by: Stefan Behrens <sbehrens@giantdisaster.de>


--
To unsubscribe from this list: send the line "unsubscribe linux-btrfs" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/313 b/313
new file mode 100755
index 0000000..579b0d3
--- /dev/null
+++ b/313
@@ -0,0 +1,96 @@ 
+#! /bin/bash
+# FS QA Test No. 313
+#
+# run basic btrfs information commands in various ways
+# sanity tests: filesystem show, label, sync, and device stats
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2013 Red Hat, Inc.  All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc.,  51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+#-----------------------------------------------------------------------
+#
+# creator
+owner=sandeen@redhat.com
+
+seq=`basename $0`
+echo "== QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1	# failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+    cd /
+    rm -f $tmp.*
+}
+
+# get standard environment, filters and checks
+. ./common.rc
+. ./btrfs.filter
+
+# real QA test starts here
+
+# Modify as appropriate.
+_supported_fs btrfs
+_supported_os Linux
+_require_scratch
+_require_scratch_dev_pool
+
+rm -f $seq.full
+
+FIRST_POOL_DEV=`echo $SCRATCH_DEV_POOL | awk '{print $1}'`
+LAST_POOL_DEV=`echo $SCRATCH_DEV_POOL | awk '{print $NF}'`
+TOTAL_DEVS=`echo $SCRATCH_DEV $SCRATCH_DEV_POOL | wc -w`
+LABEL=TestLabel.$seq
+
+echo "Scratch $SCRATCH_DEV First $FIRST_POOL_DEV last $LAST_POOL_DEV Total $TOTAL_DEVS" > $seq.full
+
+_scratch_mkfs $SCRATCH_DEV_POOL >> $seq.full 2>&1 || _fail "mkfs failed"
+
+# These have to be done unmounted...?
+echo "== Set filesystem label to $LABEL"
+$BTRFS_UTIL_PROG filesystem label $SCRATCH_DEV $LABEL
+echo "== Get filesystem label"
+$BTRFS_UTIL_PROG filesystem label $SCRATCH_DEV
+
+echo "== Mount."
+_scratch_mount
+
+echo "== Show filesystem by label"
+$BTRFS_UTIL_PROG filesystem show $LABEL | _filter_btrfs_filesystem_show $TOTAL_DEVS
+UUID=`$BTRFS_UTIL_PROG filesystem show $LABEL | grep uuid: | awk '{print $NF}'`
+
+echo "UUID $UUID" >> $seq.full
+
+echo "== Show filesystem by UUID"
+$BTRFS_UTIL_PROG filesystem show $UUID | _filter_btrfs_filesystem_show $TOTAL_DEVS $UUID
+
+echo "== Sync filesystem"
+$BTRFS_UTIL_PROG filesystem sync $SCRATCH_MNT | _filter_scratch
+
+echo "== Show device stats by mountpoint"
+$BTRFS_UTIL_PROG device stats $SCRATCH_MNT | _filter_btrfs_device_stats $TOTAL_DEVS
+echo "== Show device stats by first/scratch dev"
+$BTRFS_UTIL_PROG device stats $SCRATCH_DEV | _filter_btrfs_device_stats
+echo "== Show device stats by second dev"
+$BTRFS_UTIL_PROG device stats $FIRST_POOL_DEV | sed -e "s,$FIRST_POOL_DEV,FIRST_POOL_DEV,g"
+echo "== Show device stats by last dev"
+$BTRFS_UTIL_PROG device stats $LAST_POOL_DEV | sed -e "s,$LAST_POOL_DEV,LAST_POOL_DEV,g"
+
+# success, all done
+status=0
+exit
diff --git a/313.out b/313.out
new file mode 100644
index 0000000..f513bdd
--- /dev/null
+++ b/313.out
@@ -0,0 +1,41 @@ 
+== QA output created by 313
+== Set filesystem label to TestLabel.313
+== Get filesystem label
+TestLabel.313
+== Mount.
+== Show filesystem by label
+Label: 'TestLabel.313'  uuid: <UUID>
+	Total devices <EXACTNUM> FS bytes used <SIZE>
+	devid     <DEVID> size <SIZE> used <SIZE> path SCRATCH_DEV
+
+== Show filesystem by UUID
+Label: 'TestLabel.313'  uuid: <EXACTUUID>
+	Total devices <EXACTNUM> FS bytes used <SIZE>
+	devid     <DEVID> size <SIZE> used <SIZE> path SCRATCH_DEV
+
+== Sync filesystem
+FSSync 'SCRATCH_MNT'
+== Show device stats by mountpoint
+      <NUMDEVS> [SCRATCH_DEV].corruption_errs <NUM>
+      <NUMDEVS> [SCRATCH_DEV].flush_io_errs   <NUM>
+      <NUMDEVS> [SCRATCH_DEV].generation_errs <NUM>
+      <NUMDEVS> [SCRATCH_DEV].read_io_errs    <NUM>
+      <NUMDEVS> [SCRATCH_DEV].write_io_errs   <NUM>
+== Show device stats by first/scratch dev
+[SCRATCH_DEV].corruption_errs <NUM>
+[SCRATCH_DEV].flush_io_errs   <NUM>
+[SCRATCH_DEV].generation_errs <NUM>
+[SCRATCH_DEV].read_io_errs    <NUM>
+[SCRATCH_DEV].write_io_errs   <NUM>
+== Show device stats by second dev
+[FIRST_POOL_DEV].write_io_errs   0
+[FIRST_POOL_DEV].read_io_errs    0
+[FIRST_POOL_DEV].flush_io_errs   0
+[FIRST_POOL_DEV].corruption_errs 0
+[FIRST_POOL_DEV].generation_errs 0
+== Show device stats by last dev
+[LAST_POOL_DEV].write_io_errs   0
+[LAST_POOL_DEV].read_io_errs    0
+[LAST_POOL_DEV].flush_io_errs   0
+[LAST_POOL_DEV].corruption_errs 0
+[LAST_POOL_DEV].generation_errs 0
diff --git a/btrfs.filter b/btrfs.filter
new file mode 100644
index 0000000..8a749bf
--- /dev/null
+++ b/btrfs.filter
@@ -0,0 +1,60 @@ 
+# Filters for btrfs command output
+
+. ./common.filter
+
+# Some, but not all, commands emit "Btrfs <version>"
+_filter_btrfs_version()
+{
+	sed -e "s/^Btrfs.*//g"
+}
+
+_filter_devid()
+{
+	sed -e "s/\(devid\s\+\)[0-9]\+/\1 <DEVID>/g"
+}
+
+# If passed a number as first arg, filter that number of devices
+# If passed a UUID as second arg, filter that exact UUID
+_filter_btrfs_filesystem_show()
+{
+	if [ ! -z $1 ]; then
+		NUMDEVS=$1
+		NUM_SUBST="<EXACTNUM>"
+	else
+		NUMDEVS="[0-9]\+"
+		NUM_SUBST="<NUM>"
+	fi
+
+	UUID=""
+	if [ ! -z $2 ]; then
+		UUID=$2
+	fi
+
+	# the uniq collapses all device lines into 1
+	_filter_uuid $UUID | _filter_scratch | _filter_scratch_pool | \
+	_filter_size | _filter_btrfs_version | _filter_devid | \
+	sed -e "s/\(Total devices\) $NUMDEVS/\1 $NUM_SUBST/g" | \
+	uniq
+}
+
+# This eliminates all numbers, and shows only unique lines,
+# to accomodate a varying nr. of devices.
+# If given an argument, make sure we saw that many devices
+# in total.
+_filter_btrfs_device_stats()
+{
+	if [ ! -z $1 ]; then
+		NUMDEVS=$1
+		UNIQ_OPT="-c"
+	else
+		NUMDEVS="thiswillnotmatch"
+		UNIQ=""
+	fi
+
+	_filter_scratch | _filter_scratch_pool | \
+	sed -e "s/[0-9]\+$/<NUM>/g" | sort | uniq $UNIQ_OPT | \
+	sed -e "s/$NUMDEVS /<NUMDEVS> /g"
+}
+
+# make sure this script returns success
+/bin/true
diff --git a/common.filter b/common.filter
index c854a98..c34809f 100644
--- a/common.filter
+++ b/common.filter
@@ -226,6 +226,13 @@  _filter_scratch()
 	sed -e "s,$SCRATCH_DEV,SCRATCH_DEV,g" -e "s,$SCRATCH_MNT,SCRATCH_MNT,g"
 }
 
+# Turn any device in the scratch pool into SCRATCH_DEV
+_filter_scratch_pool()
+{
+	FILTER_STRINGS=`echo $SCRATCH_DEV_POOL | sed -e 's/\s\+/\\\|/g'`
+	sed -e "s,$FILTER_STRINGS,SCRATCH_DEV,g"
+}
+
 _filter_spaces()
 {
        sed -e 's/ [ ]*/ /g'
@@ -238,5 +245,23 @@  _filter_ln()
 	    -e "s,failed to create,creating,"
 }
 
+# If given an arg, filter *that* UUID string
+# Otherwise look for something that looks like a generic UUID
+_filter_uuid()
+{
+	if [ ! -z $1 ]; then
+		UUID=$1
+		sed -e "s/\(uuid:\) $UUID/\1 <EXACTUUID>/i"
+	else
+		sed -e "s/\(uuid:\) *[0-9a-f-][0-9a-f-]*/\1 <UUID>/i"
+	fi
+}
+
+# Filter out sizes like 6.14MB etc
+_filter_size()
+{
+	sed -e "s/[0-9\.]\+\s\?[b|k|m|g|t][b]\?/<SIZE>/ig"
+}
+
 # make sure this script returns success
 /bin/true
diff --git a/group b/group
index 8096968..fcbdfb6 100644
--- a/group
+++ b/group
@@ -429,3 +429,4 @@  stress
 303 aio dangerous ioctl rw stress
 304 aio dangerous ioctl rw stress
 305 aio dangerous enospc rw stress
+313 auto quick