| Message ID | 7faa2e3c-d157-f8f6-b818-5b95917cd7e7@jp.fujitsu.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
I rethink this and conclude that we should only allow the absolute path to the subvolume in order to prevent setting wrong filesystem by mistake when multiple filesystems are used. I will submit the patch again and please ignore this. Regards, Tomohiro On 2017/10/02 15:25, Misono, Tomohiro wrote: > This patch changes "subvol set-default" to also accept the subvolume path > for convenience. > > This is the one of the issue on github: > https://github.com/kdave/btrfs-progs/issues/35 > > If there are two args, they are assumed as subvol id and path to the fs > (the same as current behavior), and if there is only one arg, it is assumed > as the path to the subvolume. Therefore there is no ambiguity between subvol > id and subvol name, which is mentioned in the above issue page. > > subvol id is resolved by get_subvol_info() which is used by "subvol show". > > Signed-off-by: Tomohiro Misono <misono.tomohiro@jp.fujitsu.com> > --- > Documentation/btrfs-subvolume.asciidoc | 10 +++---- > cmds-subvolume.c | 48 ++++++++++++++++++++++++++-------- > 2 files changed, 42 insertions(+), 16 deletions(-) > > diff --git a/Documentation/btrfs-subvolume.asciidoc b/Documentation/btrfs-subvolume.asciidoc > index 5cfe885..df27460 100644 > --- a/Documentation/btrfs-subvolume.asciidoc > +++ b/Documentation/btrfs-subvolume.asciidoc > @@ -142,12 +142,12 @@ you can add \'\+' or \'-' in front of each items, \'+' means ascending, > for --sort you can combine some items together by \',', just like > --sort=+ogen,-gen,path,rootid. > > -*set-default* <id> <path>:: > -Set the subvolume of the filesystem <path> which is mounted as > -default. > +*set-default* [<subvolume>|<id> <path>]:: > +Set the subvolume of the filesystem which is mounted as default. > + > -The subvolume is identified by <id>, which is returned by the *subvolume list* > -command. > +If <id> and <path> is given, the subvolume is identified by <id>, > +which is returned by the *subvolume list* command. The filesystem > +is specified by <path>. > > *show* <path>:: > Show information of a given subvolume in the <path>. > diff --git a/cmds-subvolume.c b/cmds-subvolume.c > index 666f6e0..5bf8295 100644 > --- a/cmds-subvolume.c > +++ b/cmds-subvolume.c > @@ -803,28 +803,54 @@ out: > } > > static const char * const cmd_subvol_set_default_usage[] = { > - "btrfs subvolume set-default <subvolid> <path>", > - "Set the default subvolume of a filesystem", > + "btrfs subvolume set-default [<subvolume>|<subvolid> <path>]", > + "Set the default subvolume of the filesystem mounted as default.", > + "The subvolume can be specified by its path,", > + "or the pair of subvolume id and path to the filesystem.", > NULL > }; > > static int cmd_subvol_set_default(int argc, char **argv) > { > - int ret=0, fd, e; > - u64 objectid; > - char *path; > - char *subvolid; > - DIR *dirstream = NULL; > + int ret = 0; > + int fd, e; > + u64 objectid; > + char *path; > + char *subvolid; > + DIR *dirstream = NULL; > > clean_args_no_options(argc, argv, cmd_subvol_set_default_usage); > > - if (check_argc_exact(argc - optind, 2)) > + if (check_argc_min(argc - optind, 1) || > + check_argc_max(argc - optind, 2)) > usage(cmd_subvol_set_default_usage); > > - subvolid = argv[optind]; > - path = argv[optind + 1]; > + if (argc - optind == 1) { > + /* path to the subvolume is specified */ > + struct root_info ri; > + char *fullpath; > > - objectid = arg_strtou64(subvolid); > + path = argv[optind]; > + fullpath = realpath(path, NULL); > + if (!fullpath) { > + error("cannot find real path for '%s': %s", > + path, strerror(errno)); > + return 1; > + } > + > + ret = get_subvol_info(fullpath, &ri); > + free(fullpath); > + > + if (ret) > + return 1; > + > + objectid = ri.root_id; > + } else { > + /* subvol id and path to the filesystem are specified */ > + subvolid = argv[optind]; > + path = argv[optind + 1]; > + objectid = arg_strtou64(subvolid); > + } > > fd = btrfs_open_dir(path, &dirstream, 1); > if (fd < 0) > -- To unsubscribe from this list: send the line "unsubscribe linux-btrfs" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Mon, Oct 02, 2017 at 03:25:40PM +0900, Misono, Tomohiro wrote: > This patch changes "subvol set-default" to also accept the subvolume path > for convenience. > > This is the one of the issue on github: > https://github.com/kdave/btrfs-progs/issues/35 > > If there are two args, they are assumed as subvol id and path to the fs > (the same as current behavior), and if there is only one arg, it is assumed > as the path to the subvolume. Therefore there is no ambiguity between subvol > id and subvol name, which is mentioned in the above issue page. > > subvol id is resolved by get_subvol_info() which is used by "subvol show". > > Signed-off-by: Tomohiro Misono <misono.tomohiro@jp.fujitsu.com> > --- > Documentation/btrfs-subvolume.asciidoc | 10 +++---- > cmds-subvolume.c | 48 ++++++++++++++++++++++++++-------- > 2 files changed, 42 insertions(+), 16 deletions(-) > > diff --git a/Documentation/btrfs-subvolume.asciidoc b/Documentation/btrfs-subvolume.asciidoc > index 5cfe885..df27460 100644 > --- a/Documentation/btrfs-subvolume.asciidoc > +++ b/Documentation/btrfs-subvolume.asciidoc > @@ -142,12 +142,12 @@ you can add \'\+' or \'-' in front of each items, \'+' means ascending, > for --sort you can combine some items together by \',', just like > --sort=+ogen,-gen,path,rootid. > > -*set-default* <id> <path>:: > -Set the subvolume of the filesystem <path> which is mounted as > -default. > +*set-default* [<subvolume>|<id> <path>]:: > +Set the subvolume of the filesystem which is mounted as default. > + > -The subvolume is identified by <id>, which is returned by the *subvolume list* > -command. > +If <id> and <path> is given, the subvolume is identified by <id>, > +which is returned by the *subvolume list* command. The filesystem > +is specified by <path>. > > *show* <path>:: > Show information of a given subvolume in the <path>. > diff --git a/cmds-subvolume.c b/cmds-subvolume.c > index 666f6e0..5bf8295 100644 > --- a/cmds-subvolume.c > +++ b/cmds-subvolume.c > @@ -803,28 +803,54 @@ out: > } > > static const char * const cmd_subvol_set_default_usage[] = { > - "btrfs subvolume set-default <subvolid> <path>", > - "Set the default subvolume of a filesystem", > + "btrfs subvolume set-default [<subvolume>|<subvolid> <path>]", > + "Set the default subvolume of the filesystem mounted as default.", > + "The subvolume can be specified by its path,", > + "or the pair of subvolume id and path to the filesystem.", > NULL > }; > > static int cmd_subvol_set_default(int argc, char **argv) > { > - int ret=0, fd, e; > - u64 objectid; > - char *path; > - char *subvolid; > - DIR *dirstream = NULL; > + int ret = 0; > + int fd, e; > + u64 objectid; > + char *path; > + char *subvolid; > + DIR *dirstream = NULL; Please don't change unrelated code, I'll drop it from the patch. > > clean_args_no_options(argc, argv, cmd_subvol_set_default_usage); > > - if (check_argc_exact(argc - optind, 2)) > + if (check_argc_min(argc - optind, 1) || > + check_argc_max(argc - optind, 2)) > usage(cmd_subvol_set_default_usage); > > - subvolid = argv[optind]; > - path = argv[optind + 1]; > + if (argc - optind == 1) { > + /* path to the subvolume is specified */ > + struct root_info ri; > + char *fullpath; > > - objectid = arg_strtou64(subvolid); > + path = argv[optind]; > + fullpath = realpath(path, NULL); > + if (!fullpath) { > + error("cannot find real path for '%s': %s", > + path, strerror(errno)); > + return 1; > + } > + > + ret = get_subvol_info(fullpath, &ri); That's an overkill, we just need to read the subvolume id of the given path, but get_subvol_info reads the entire subvolume list and more. Instead, please use lookup_path_rootid + test_issubvolume and we need to avoid the empty subvol (inode number 2). > + free(fullpath); > + > + if (ret) > + return 1; > + > + objectid = ri.root_id; > + } else { > + /* subvol id and path to the filesystem are specified */ > + subvolid = argv[optind]; > + path = argv[optind + 1]; > + objectid = arg_strtou64(subvolid); > + } > > fd = btrfs_open_dir(path, &dirstream, 1); > if (fd < 0) -- To unsubscribe from this list: send the line "unsubscribe linux-btrfs" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/btrfs-subvolume.asciidoc b/Documentation/btrfs-subvolume.asciidoc index 5cfe885..df27460 100644 --- a/Documentation/btrfs-subvolume.asciidoc +++ b/Documentation/btrfs-subvolume.asciidoc @@ -142,12 +142,12 @@ you can add \'\+' or \'-' in front of each items, \'+' means ascending, for --sort you can combine some items together by \',', just like --sort=+ogen,-gen,path,rootid. -*set-default* <id> <path>:: -Set the subvolume of the filesystem <path> which is mounted as -default. +*set-default* [<subvolume>|<id> <path>]:: +Set the subvolume of the filesystem which is mounted as default. + -The subvolume is identified by <id>, which is returned by the *subvolume list* -command. +If <id> and <path> is given, the subvolume is identified by <id>, +which is returned by the *subvolume list* command. The filesystem +is specified by <path>. *show* <path>:: Show information of a given subvolume in the <path>. diff --git a/cmds-subvolume.c b/cmds-subvolume.c index 666f6e0..5bf8295 100644 --- a/cmds-subvolume.c +++ b/cmds-subvolume.c @@ -803,28 +803,54 @@ out: } static const char * const cmd_subvol_set_default_usage[] = { - "btrfs subvolume set-default <subvolid> <path>", - "Set the default subvolume of a filesystem", + "btrfs subvolume set-default [<subvolume>|<subvolid> <path>]", + "Set the default subvolume of the filesystem mounted as default.", + "The subvolume can be specified by its path,", + "or the pair of subvolume id and path to the filesystem.", NULL }; static int cmd_subvol_set_default(int argc, char **argv) { - int ret=0, fd, e; - u64 objectid; - char *path; - char *subvolid; - DIR *dirstream = NULL; + int ret = 0; + int fd, e; + u64 objectid; + char *path; + char *subvolid; + DIR *dirstream = NULL; clean_args_no_options(argc, argv, cmd_subvol_set_default_usage); - if (check_argc_exact(argc - optind, 2)) + if (check_argc_min(argc - optind, 1) || + check_argc_max(argc - optind, 2)) usage(cmd_subvol_set_default_usage); - subvolid = argv[optind]; - path = argv[optind + 1]; + if (argc - optind == 1) { + /* path to the subvolume is specified */ + struct root_info ri; + char *fullpath; - objectid = arg_strtou64(subvolid); + path = argv[optind]; + fullpath = realpath(path, NULL); + if (!fullpath) { + error("cannot find real path for '%s': %s", + path, strerror(errno)); + return 1; + } + + ret = get_subvol_info(fullpath, &ri); + free(fullpath); + + if (ret) + return 1; + + objectid = ri.root_id; + } else { + /* subvol id and path to the filesystem are specified */ + subvolid = argv[optind]; + path = argv[optind + 1]; + objectid = arg_strtou64(subvolid); + } fd = btrfs_open_dir(path, &dirstream, 1); if (fd < 0)
This patch changes "subvol set-default" to also accept the subvolume path for convenience. This is the one of the issue on github: https://github.com/kdave/btrfs-progs/issues/35 If there are two args, they are assumed as subvol id and path to the fs (the same as current behavior), and if there is only one arg, it is assumed as the path to the subvolume. Therefore there is no ambiguity between subvol id and subvol name, which is mentioned in the above issue page. subvol id is resolved by get_subvol_info() which is used by "subvol show". Signed-off-by: Tomohiro Misono <misono.tomohiro@jp.fujitsu.com> --- Documentation/btrfs-subvolume.asciidoc | 10 +++---- cmds-subvolume.c | 48 ++++++++++++++++++++++++++-------- 2 files changed, 42 insertions(+), 16 deletions(-)