diff mbox series

[v3,10/10] btrfs: test tempfsid with device add, seed, and balance

Message ID faeda97208d0a2ecca94490b35a4dc8e98e7fdc6.1708772619.git.anand.jain@oracle.com (mailing list archive)
State New, archived
Headers show
Series btrfs: functional test cases for tempfsid | expand

Commit Message

Anand Jain Feb. 24, 2024, 4:43 p.m. UTC
Make sure that basic functions such as seeding and device add fail,
while balance runs successfully with tempfsid.

Signed-off-by: Anand Jain <anand.jain@oracle.com>
---
v3:
 Comment updated.
 Add balance group.
 Drop prerequisite checks.
 Use error (from subvol create) in the golden output instead of calling _fail.

v2:
 Remove unnecessary function.
 Add clone group
 use $UMOUNT_PROG
 Let _cp_reflink fail on the stdout.

 tests/btrfs/315     | 78 +++++++++++++++++++++++++++++++++++++++++++++
 tests/btrfs/315.out | 10 ++++++
 2 files changed, 88 insertions(+)
 create mode 100755 tests/btrfs/315
 create mode 100644 tests/btrfs/315.out

Comments

Filipe Manana Feb. 26, 2024, 12:08 p.m. UTC | #1
On Sat, Feb 24, 2024 at 4:44 PM Anand Jain <anand.jain@oracle.com> wrote:
>
> Make sure that basic functions such as seeding and device add fail,
> while balance runs successfully with tempfsid.
>
> Signed-off-by: Anand Jain <anand.jain@oracle.com>
> ---
> v3:
>  Comment updated.
>  Add balance group.
>  Drop prerequisite checks.
>  Use error (from subvol create) in the golden output instead of calling _fail.
>
> v2:
>  Remove unnecessary function.
>  Add clone group
>  use $UMOUNT_PROG
>  Let _cp_reflink fail on the stdout.
>
>  tests/btrfs/315     | 78 +++++++++++++++++++++++++++++++++++++++++++++
>  tests/btrfs/315.out | 10 ++++++
>  2 files changed, 88 insertions(+)
>  create mode 100755 tests/btrfs/315
>  create mode 100644 tests/btrfs/315.out
>
> diff --git a/tests/btrfs/315 b/tests/btrfs/315
> new file mode 100755
> index 000000000000..696e26fe339c
> --- /dev/null
> +++ b/tests/btrfs/315
> @@ -0,0 +1,78 @@
> +#! /bin/bash
> +# SPDX-License-Identifier: GPL-2.0
> +# Copyright (c) 2024 Oracle. All Rights Reserved.
> +#
> +# FS QA Test 315
> +#
> +# Verify if the seed and device add to a tempfsid filesystem fails
> +# and balance devices is successful.
> +#
> +. ./common/preamble
> +_begin_fstest auto quick volume seed balance tempfsid
> +
> +_cleanup()
> +{
> +       cd /
> +       $UMOUNT_PROG $tempfsid_mnt 2>/dev/null
> +       rm -r -f $tmp.*
> +       rm -r -f $tempfsid_mnt
> +}
> +
> +. ./common/filter.btrfs
> +
> +_supported_fs btrfs
> +_require_btrfs_sysfs_fsid

Same as in the previous test case. This requirement is not needed, the
sysfs fsid path is not used anywhere in this test, likely copy-pasted
from previous test cases in this patchset.

Thanks.

> +_require_scratch_dev_pool 3
> +_require_btrfs_fs_feature temp_fsid
> +
> +_scratch_dev_pool_get 3
> +
> +# mount point for the tempfsid device
> +tempfsid_mnt=$TEST_DIR/$seq/tempfsid_mnt
> +
> +seed_device_must_fail()
> +{
> +       echo ---- $FUNCNAME ----
> +
> +       mkfs_clone ${SCRATCH_DEV} ${SCRATCH_DEV_NAME[1]}
> +
> +       $BTRFS_TUNE_PROG -S 1 ${SCRATCH_DEV}
> +       $BTRFS_TUNE_PROG -S 1 ${SCRATCH_DEV_NAME[1]}
> +
> +       _scratch_mount 2>&1 | _filter_scratch
> +       _mount ${SCRATCH_DEV_NAME[1]} ${tempfsid_mnt} 2>&1 | _filter_test_dir
> +}
> +
> +device_add_must_fail()
> +{
> +       echo ---- $FUNCNAME ----
> +
> +       mkfs_clone ${SCRATCH_DEV} ${SCRATCH_DEV_NAME[1]}
> +       _scratch_mount
> +       _mount ${SCRATCH_DEV_NAME[1]} ${tempfsid_mnt}
> +
> +       $XFS_IO_PROG -fc 'pwrite -S 0x61 0 9000' $SCRATCH_MNT/foo | \
> +                                                       _filter_xfs_io
> +
> +$BTRFS_UTIL_PROG device add -f ${SCRATCH_DEV_NAME[2]} ${tempfsid_mnt} 2>&1 | \
> +               grep -v "Performing full device TRIM" | _filter_scratch_pool
> +
> +       echo Balance must be successful
> +       _run_btrfs_balance_start ${tempfsid_mnt}
> +}
> +
> +mkdir -p $tempfsid_mnt
> +
> +seed_device_must_fail
> +
> +_scratch_unmount
> +_cleanup
> +mkdir -p $tempfsid_mnt
> +
> +device_add_must_fail
> +
> +_scratch_dev_pool_put
> +
> +# success, all done
> +status=0
> +exit
> diff --git a/tests/btrfs/315.out b/tests/btrfs/315.out
> new file mode 100644
> index 000000000000..56301f9f069e
> --- /dev/null
> +++ b/tests/btrfs/315.out
> @@ -0,0 +1,10 @@
> +QA output created by 315
> +---- seed_device_must_fail ----
> +mount: SCRATCH_MNT: WARNING: source write-protected, mounted read-only.
> +mount: TEST_DIR/315/tempfsid_mnt: mount(2) system call failed: File exists.
> +---- device_add_must_fail ----
> +wrote 9000/9000 bytes at offset 0
> +XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
> +ERROR: error adding device 'SCRATCH_DEV': Invalid argument
> +Balance must be successful
> +Done, had to relocate 3 out of 3 chunks
> --
> 2.39.3
>
Anand Jain Feb. 29, 2024, 1:49 a.m. UTC | #2
>> +_require_btrfs_sysfs_fsid
> 
> Same as in the previous test case. This requirement is not needed, the
> sysfs fsid path is not used anywhere in this test, likely copy-pasted
> from previous test cases in this patchset.
> 

  Yep. Replaced with "_require_btrfs_fs_feature temp_fsid"

>> diff --git a/tests/btrfs/315.out b/tests/btrfs/315.out
>> new file mode 100644
>> index 000000000000..56301f9f069e
>> --- /dev/null
>> +++ b/tests/btrfs/315.out
>> @@ -0,0 +1,10 @@
>> +QA output created by 315
>> +---- seed_device_must_fail ----
>> +mount: SCRATCH_MNT: WARNING: source write-protected, mounted read-only.

>> +mount: TEST_DIR/315/tempfsid_mnt: mount(2) system call failed: File exists.

The error output has changed due to some external fixes.
V4 contains changes accordingly.

Old:
         mount: <mnt-point>: mount(2) system call failed: File exists.

New:
         mount: <mnt-point>: fsconfig system call failed: File exists.
         dmesg(1) may have more information after failed mount system call.

Thanks, Anand
diff mbox series

Patch

diff --git a/tests/btrfs/315 b/tests/btrfs/315
new file mode 100755
index 000000000000..696e26fe339c
--- /dev/null
+++ b/tests/btrfs/315
@@ -0,0 +1,78 @@ 
+#! /bin/bash
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (c) 2024 Oracle. All Rights Reserved.
+#
+# FS QA Test 315
+#
+# Verify if the seed and device add to a tempfsid filesystem fails
+# and balance devices is successful.
+#
+. ./common/preamble
+_begin_fstest auto quick volume seed balance tempfsid
+
+_cleanup()
+{
+	cd /
+	$UMOUNT_PROG $tempfsid_mnt 2>/dev/null
+	rm -r -f $tmp.*
+	rm -r -f $tempfsid_mnt
+}
+
+. ./common/filter.btrfs
+
+_supported_fs btrfs
+_require_btrfs_sysfs_fsid
+_require_scratch_dev_pool 3
+_require_btrfs_fs_feature temp_fsid
+
+_scratch_dev_pool_get 3
+
+# mount point for the tempfsid device
+tempfsid_mnt=$TEST_DIR/$seq/tempfsid_mnt
+
+seed_device_must_fail()
+{
+	echo ---- $FUNCNAME ----
+
+	mkfs_clone ${SCRATCH_DEV} ${SCRATCH_DEV_NAME[1]}
+
+	$BTRFS_TUNE_PROG -S 1 ${SCRATCH_DEV}
+	$BTRFS_TUNE_PROG -S 1 ${SCRATCH_DEV_NAME[1]}
+
+	_scratch_mount 2>&1 | _filter_scratch
+	_mount ${SCRATCH_DEV_NAME[1]} ${tempfsid_mnt} 2>&1 | _filter_test_dir
+}
+
+device_add_must_fail()
+{
+	echo ---- $FUNCNAME ----
+
+	mkfs_clone ${SCRATCH_DEV} ${SCRATCH_DEV_NAME[1]}
+	_scratch_mount
+	_mount ${SCRATCH_DEV_NAME[1]} ${tempfsid_mnt}
+
+	$XFS_IO_PROG -fc 'pwrite -S 0x61 0 9000' $SCRATCH_MNT/foo | \
+							_filter_xfs_io
+
+$BTRFS_UTIL_PROG device add -f ${SCRATCH_DEV_NAME[2]} ${tempfsid_mnt} 2>&1 | \
+		grep -v "Performing full device TRIM" | _filter_scratch_pool
+
+	echo Balance must be successful
+	_run_btrfs_balance_start ${tempfsid_mnt}
+}
+
+mkdir -p $tempfsid_mnt
+
+seed_device_must_fail
+
+_scratch_unmount
+_cleanup
+mkdir -p $tempfsid_mnt
+
+device_add_must_fail
+
+_scratch_dev_pool_put
+
+# success, all done
+status=0
+exit
diff --git a/tests/btrfs/315.out b/tests/btrfs/315.out
new file mode 100644
index 000000000000..56301f9f069e
--- /dev/null
+++ b/tests/btrfs/315.out
@@ -0,0 +1,10 @@ 
+QA output created by 315
+---- seed_device_must_fail ----
+mount: SCRATCH_MNT: WARNING: source write-protected, mounted read-only.
+mount: TEST_DIR/315/tempfsid_mnt: mount(2) system call failed: File exists.
+---- device_add_must_fail ----
+wrote 9000/9000 bytes at offset 0
+XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+ERROR: error adding device 'SCRATCH_DEV': Invalid argument
+Balance must be successful
+Done, had to relocate 3 out of 3 chunks