| Message ID | 20190201154232.10505-1-jagan@amarulasolutions.com (mailing list archive) |
|---|---|
| Headers | show |
| Series | drm/sun4i: Allwinner A64 MIPI-DSI support | expand |
On Fri, Feb 01, 2019 at 09:12:09PM +0530, Jagan Teki wrote: > Here is next version changes for Allwinner A64 MIPI-DSI support > > This series grouped the changes like previous version[1] with different > sets to support three different panels types that can fit into the DSI > controller. > > set:1, for 4-lane, burst mode support > - patch 0001: 0009, DSI controller changes that support burst mode. > > set:2, for A64 DSI support > - patch 0010: tcon dclk divider computation based on A64 BSP. > - patch 0011: 0017, Allwinner A64 DSI controller changes. > > set:3, enable 4-lane burst mode panel: > - patch 0018: Overlay patch that enable Feiyang FY07024DI26A30-D > burst mode panel on Pine64-LTS > > set:4, enable 4-lane video mode panel: > - patch 0019: msg type MIPI_DSI_GENERIC_SHORT_WRITE_2_PARAM support > - patch 0020: Overlay patch that enable Bananapi S070WV20-CT16 ICN6211 > panel on Bananapi M64 > > set:5, enable 2-lane video mode panel: > - patch 0021, 0022: DSI hfp and hbp timings fixes > - patch 0023: Enable Techstar TS8550B panel on Amarula A64-Relic You do realise that pushing through a series while the previous version's discussion hasn't settled yet will not get you anywhere, right? Maxime
On Fri, Feb 1, 2019 at 9:19 PM Maxime Ripard <maxime.ripard@bootlin.com> wrote: > > On Fri, Feb 01, 2019 at 09:12:09PM +0530, Jagan Teki wrote: > > Here is next version changes for Allwinner A64 MIPI-DSI support > > > > This series grouped the changes like previous version[1] with different > > sets to support three different panels types that can fit into the DSI > > controller. > > > > set:1, for 4-lane, burst mode support > > - patch 0001: 0009, DSI controller changes that support burst mode. > > > > set:2, for A64 DSI support > > - patch 0010: tcon dclk divider computation based on A64 BSP. > > - patch 0011: 0017, Allwinner A64 DSI controller changes. > > > > set:3, enable 4-lane burst mode panel: > > - patch 0018: Overlay patch that enable Feiyang FY07024DI26A30-D > > burst mode panel on Pine64-LTS > > > > set:4, enable 4-lane video mode panel: > > - patch 0019: msg type MIPI_DSI_GENERIC_SHORT_WRITE_2_PARAM support > > - patch 0020: Overlay patch that enable Bananapi S070WV20-CT16 ICN6211 > > panel on Bananapi M64 > > > > set:5, enable 2-lane video mode panel: > > - patch 0021, 0022: DSI hfp and hbp timings fixes > > - patch 0023: Enable Techstar TS8550B panel on Amarula A64-Relic > > You do realise that pushing through a series while the previous > version's discussion hasn't settled yet will not get you anywhere, > right? Except the clock, I made few changes with your previous comments. Yes we can still under clock discussion page, no issues on that. just to group the remaining patches to finalize if any issues on those.
On Fri, Feb 1, 2019 at 9:12 PM Jagan Teki <jagan@amarulasolutions.com> wrote: > > Here is next version changes for Allwinner A64 MIPI-DSI support > > This series grouped the changes like previous version[1] with different > sets to support three different panels types that can fit into the DSI > controller. > > set:1, for 4-lane, burst mode support > - patch 0001: 0009, DSI controller changes that support burst mode. > > set:2, for A64 DSI support > - patch 0010: tcon dclk divider computation based on A64 BSP. > - patch 0011: 0017, Allwinner A64 DSI controller changes. > > set:3, enable 4-lane burst mode panel: > - patch 0018: Overlay patch that enable Feiyang FY07024DI26A30-D > burst mode panel on Pine64-LTS > > set:4, enable 4-lane video mode panel: > - patch 0019: msg type MIPI_DSI_GENERIC_SHORT_WRITE_2_PARAM support > - patch 0020: Overlay patch that enable Bananapi S070WV20-CT16 ICN6211 > panel on Bananapi M64 > > set:5, enable 2-lane video mode panel: > - patch 0021, 0022: DSI hfp and hbp timings fixes > - patch 0023: Enable Techstar TS8550B panel on Amarula A64-Relic > > Changes for v7: > - moved vcc-dsi binding to required filed. > - drop quotes on fallback dphy bindings. > - drop min_rate clock pll-mipi patches. > - introduce dclk divider computation as like A64 BSP. > - add A64 DSI quark patches. > - fixed A64 DSI pipeline. > - add proper commit messages. > - collect Merlijn Wajer Tested-by credits. > Changes for v6: > - dropped unneeded changes, patches > - fixed all burst mode patches as per previous version comments > - rebase on master > - update proper commit message > - dropped unneeded comments > - order the patches that make review easy > Changes for v5: > - collect Rob, Acked-by > - droped "Fix VBP size calculation" patch > - updated vblk timing calculation. > - droped techstar, bananapi dsi panel drivers which may require > bridge or other setup. it's under discussion. > Changes for v4: > - droppoed untested CCU_FEATURE_FIXED_POSTDIV check code in > nkm min, max rate patches > - create two patches for "Add Allwinner A64 MIPI DSI support" > one for has_mod_clk quirk and other one for A64 support > - use existing driver code construct for hblk computation > - dropped "Increase hfp packet overhead" patch [2], though BSP added > this but we have no issues as of now. > (no issues on panel side w/o this change) > - create separate function for vblk computation > - enable vcc-dsi regulator in dsi_runtime_resume > - collect Rob, Acked-by > - update MAINTAINERS file for panel drivers > - cleanup commit messages > - fixed checkpatch warnings/errors > > [1] https://patchwork.kernel.org/cover/10779893/ > > Any inputs? > Jagan. > > Jagan Teki (23): > drm/sun4i: sun6i_mipi_dsi: Compute burst mode loop N1 instruction > delay > drm/sun4i: sun6i_mipi_dsi: Support instruction loop selection > drm/sun4i: sun6i_mipi_dsi: Setup burst mode timings > drm/sun4i: sun6i_mipi_dsi: Simplify drq to support all modes > drm/sun4i: tcon: Export get tcon0 routine > drm/sun4i: sun6i_mipi_dsi: Probe tcon0 during dsi_bind > drm/sun4i: sun6i_mipi_dsi: Setup burst mode > drm/sun4i: sun6i_mipi_dsi: Enable trail_inv and trail_fill controls > drm/sun4i: sun6i_mipi_dsi: Enable HBP, HSA_HSE for burst mode Can you pick these burst changes which are generic to all SoCs. and reset will send once we decide the tcon clock.
On Tue, Feb 12, 2019 at 03:16:02PM +0530, Jagan Teki wrote: > On Fri, Feb 1, 2019 at 9:12 PM Jagan Teki <jagan@amarulasolutions.com> wrote: > > > > Here is next version changes for Allwinner A64 MIPI-DSI support > > > > This series grouped the changes like previous version[1] with different > > sets to support three different panels types that can fit into the DSI > > controller. > > > > set:1, for 4-lane, burst mode support > > - patch 0001: 0009, DSI controller changes that support burst mode. > > > > set:2, for A64 DSI support > > - patch 0010: tcon dclk divider computation based on A64 BSP. > > - patch 0011: 0017, Allwinner A64 DSI controller changes. > > > > set:3, enable 4-lane burst mode panel: > > - patch 0018: Overlay patch that enable Feiyang FY07024DI26A30-D > > burst mode panel on Pine64-LTS > > > > set:4, enable 4-lane video mode panel: > > - patch 0019: msg type MIPI_DSI_GENERIC_SHORT_WRITE_2_PARAM support > > - patch 0020: Overlay patch that enable Bananapi S070WV20-CT16 ICN6211 > > panel on Bananapi M64 > > > > set:5, enable 2-lane video mode panel: > > - patch 0021, 0022: DSI hfp and hbp timings fixes > > - patch 0023: Enable Techstar TS8550B panel on Amarula A64-Relic > > > > Changes for v7: > > - moved vcc-dsi binding to required filed. > > - drop quotes on fallback dphy bindings. > > - drop min_rate clock pll-mipi patches. > > - introduce dclk divider computation as like A64 BSP. > > - add A64 DSI quark patches. > > - fixed A64 DSI pipeline. > > - add proper commit messages. > > - collect Merlijn Wajer Tested-by credits. > > Changes for v6: > > - dropped unneeded changes, patches > > - fixed all burst mode patches as per previous version comments > > - rebase on master > > - update proper commit message > > - dropped unneeded comments > > - order the patches that make review easy > > Changes for v5: > > - collect Rob, Acked-by > > - droped "Fix VBP size calculation" patch > > - updated vblk timing calculation. > > - droped techstar, bananapi dsi panel drivers which may require > > bridge or other setup. it's under discussion. > > Changes for v4: > > - droppoed untested CCU_FEATURE_FIXED_POSTDIV check code in > > nkm min, max rate patches > > - create two patches for "Add Allwinner A64 MIPI DSI support" > > one for has_mod_clk quirk and other one for A64 support > > - use existing driver code construct for hblk computation > > - dropped "Increase hfp packet overhead" patch [2], though BSP added > > this but we have no issues as of now. > > (no issues on panel side w/o this change) > > - create separate function for vblk computation > > - enable vcc-dsi regulator in dsi_runtime_resume > > - collect Rob, Acked-by > > - update MAINTAINERS file for panel drivers > > - cleanup commit messages > > - fixed checkpatch warnings/errors > > > > [1] https://patchwork.kernel.org/cover/10779893/ > > > > Any inputs? > > Jagan. > > > > Jagan Teki (23): > > drm/sun4i: sun6i_mipi_dsi: Compute burst mode loop N1 instruction > > delay > > drm/sun4i: sun6i_mipi_dsi: Support instruction loop selection > > drm/sun4i: sun6i_mipi_dsi: Setup burst mode timings > > drm/sun4i: sun6i_mipi_dsi: Simplify drq to support all modes > > drm/sun4i: tcon: Export get tcon0 routine > > drm/sun4i: sun6i_mipi_dsi: Probe tcon0 during dsi_bind > > drm/sun4i: sun6i_mipi_dsi: Setup burst mode > > drm/sun4i: sun6i_mipi_dsi: Enable trail_inv and trail_fill controls > > drm/sun4i: sun6i_mipi_dsi: Enable HBP, HSA_HSE for burst mode > > Can you pick these burst changes which are generic to all SoCs. and > reset will send once we decide the tcon clock. These patches don't implement what we discussed last week, and as I told you already, most of them really need some work on the commit log and their explanations. Maxime
On Wed, Feb 13, 2019 at 2:33 PM Maxime Ripard <maxime.ripard@bootlin.com> wrote: > > On Tue, Feb 12, 2019 at 03:16:02PM +0530, Jagan Teki wrote: > > On Fri, Feb 1, 2019 at 9:12 PM Jagan Teki <jagan@amarulasolutions.com> wrote: > > > > > > Here is next version changes for Allwinner A64 MIPI-DSI support > > > > > > This series grouped the changes like previous version[1] with different > > > sets to support three different panels types that can fit into the DSI > > > controller. > > > > > > set:1, for 4-lane, burst mode support > > > - patch 0001: 0009, DSI controller changes that support burst mode. > > > > > > set:2, for A64 DSI support > > > - patch 0010: tcon dclk divider computation based on A64 BSP. > > > - patch 0011: 0017, Allwinner A64 DSI controller changes. > > > > > > set:3, enable 4-lane burst mode panel: > > > - patch 0018: Overlay patch that enable Feiyang FY07024DI26A30-D > > > burst mode panel on Pine64-LTS > > > > > > set:4, enable 4-lane video mode panel: > > > - patch 0019: msg type MIPI_DSI_GENERIC_SHORT_WRITE_2_PARAM support > > > - patch 0020: Overlay patch that enable Bananapi S070WV20-CT16 ICN6211 > > > panel on Bananapi M64 > > > > > > set:5, enable 2-lane video mode panel: > > > - patch 0021, 0022: DSI hfp and hbp timings fixes > > > - patch 0023: Enable Techstar TS8550B panel on Amarula A64-Relic > > > > > > Changes for v7: > > > - moved vcc-dsi binding to required filed. > > > - drop quotes on fallback dphy bindings. > > > - drop min_rate clock pll-mipi patches. > > > - introduce dclk divider computation as like A64 BSP. > > > - add A64 DSI quark patches. > > > - fixed A64 DSI pipeline. > > > - add proper commit messages. > > > - collect Merlijn Wajer Tested-by credits. > > > Changes for v6: > > > - dropped unneeded changes, patches > > > - fixed all burst mode patches as per previous version comments > > > - rebase on master > > > - update proper commit message > > > - dropped unneeded comments > > > - order the patches that make review easy > > > Changes for v5: > > > - collect Rob, Acked-by > > > - droped "Fix VBP size calculation" patch > > > - updated vblk timing calculation. > > > - droped techstar, bananapi dsi panel drivers which may require > > > bridge or other setup. it's under discussion. > > > Changes for v4: > > > - droppoed untested CCU_FEATURE_FIXED_POSTDIV check code in > > > nkm min, max rate patches > > > - create two patches for "Add Allwinner A64 MIPI DSI support" > > > one for has_mod_clk quirk and other one for A64 support > > > - use existing driver code construct for hblk computation > > > - dropped "Increase hfp packet overhead" patch [2], though BSP added > > > this but we have no issues as of now. > > > (no issues on panel side w/o this change) > > > - create separate function for vblk computation > > > - enable vcc-dsi regulator in dsi_runtime_resume > > > - collect Rob, Acked-by > > > - update MAINTAINERS file for panel drivers > > > - cleanup commit messages > > > - fixed checkpatch warnings/errors > > > > > > [1] https://patchwork.kernel.org/cover/10779893/ > > > > > > Any inputs? > > > Jagan. > > > > > > Jagan Teki (23): > > > drm/sun4i: sun6i_mipi_dsi: Compute burst mode loop N1 instruction > > > delay > > > drm/sun4i: sun6i_mipi_dsi: Support instruction loop selection > > > drm/sun4i: sun6i_mipi_dsi: Setup burst mode timings > > > drm/sun4i: sun6i_mipi_dsi: Simplify drq to support all modes > > > drm/sun4i: tcon: Export get tcon0 routine > > > drm/sun4i: sun6i_mipi_dsi: Probe tcon0 during dsi_bind > > > drm/sun4i: sun6i_mipi_dsi: Setup burst mode > > > drm/sun4i: sun6i_mipi_dsi: Enable trail_inv and trail_fill controls > > > drm/sun4i: sun6i_mipi_dsi: Enable HBP, HSA_HSE for burst mode > > > > Can you pick these burst changes which are generic to all SoCs. and > > reset will send once we decide the tcon clock. > > These patches don't implement what we discussed last week, and as I > told you already, most of them really need some work on the commit log > and their explanations. If I'm not wrong, we discussed about tcon_dclk (PLL_MIPI) last week [1] and these burst changes between 01/23 to 09/23 which are generic changes to DSI and not related to clock. Apart from that I made few changes on commit logs between the versions (which I was mentioned on the cover-letter patch). If any issues issues on commit message, please let me know so-that I can rework. [1] https://patchwork.kernel.org/patch/10780041/
On Wed, Feb 13, 2019 at 2:49 PM Jagan Teki <jagan@amarulasolutions.com> wrote: > > On Wed, Feb 13, 2019 at 2:33 PM Maxime Ripard <maxime.ripard@bootlin.com> wrote: > > > > On Tue, Feb 12, 2019 at 03:16:02PM +0530, Jagan Teki wrote: > > > On Fri, Feb 1, 2019 at 9:12 PM Jagan Teki <jagan@amarulasolutions.com> wrote: > > > > > > > > Here is next version changes for Allwinner A64 MIPI-DSI support > > > > > > > > This series grouped the changes like previous version[1] with different > > > > sets to support three different panels types that can fit into the DSI > > > > controller. > > > > > > > > set:1, for 4-lane, burst mode support > > > > - patch 0001: 0009, DSI controller changes that support burst mode. > > > > > > > > set:2, for A64 DSI support > > > > - patch 0010: tcon dclk divider computation based on A64 BSP. > > > > - patch 0011: 0017, Allwinner A64 DSI controller changes. > > > > > > > > set:3, enable 4-lane burst mode panel: > > > > - patch 0018: Overlay patch that enable Feiyang FY07024DI26A30-D > > > > burst mode panel on Pine64-LTS > > > > > > > > set:4, enable 4-lane video mode panel: > > > > - patch 0019: msg type MIPI_DSI_GENERIC_SHORT_WRITE_2_PARAM support > > > > - patch 0020: Overlay patch that enable Bananapi S070WV20-CT16 ICN6211 > > > > panel on Bananapi M64 > > > > > > > > set:5, enable 2-lane video mode panel: > > > > - patch 0021, 0022: DSI hfp and hbp timings fixes > > > > - patch 0023: Enable Techstar TS8550B panel on Amarula A64-Relic > > > > > > > > Changes for v7: > > > > - moved vcc-dsi binding to required filed. > > > > - drop quotes on fallback dphy bindings. > > > > - drop min_rate clock pll-mipi patches. > > > > - introduce dclk divider computation as like A64 BSP. > > > > - add A64 DSI quark patches. > > > > - fixed A64 DSI pipeline. > > > > - add proper commit messages. > > > > - collect Merlijn Wajer Tested-by credits. > > > > Changes for v6: > > > > - dropped unneeded changes, patches > > > > - fixed all burst mode patches as per previous version comments > > > > - rebase on master > > > > - update proper commit message > > > > - dropped unneeded comments > > > > - order the patches that make review easy > > > > Changes for v5: > > > > - collect Rob, Acked-by > > > > - droped "Fix VBP size calculation" patch > > > > - updated vblk timing calculation. > > > > - droped techstar, bananapi dsi panel drivers which may require > > > > bridge or other setup. it's under discussion. > > > > Changes for v4: > > > > - droppoed untested CCU_FEATURE_FIXED_POSTDIV check code in > > > > nkm min, max rate patches > > > > - create two patches for "Add Allwinner A64 MIPI DSI support" > > > > one for has_mod_clk quirk and other one for A64 support > > > > - use existing driver code construct for hblk computation > > > > - dropped "Increase hfp packet overhead" patch [2], though BSP added > > > > this but we have no issues as of now. > > > > (no issues on panel side w/o this change) > > > > - create separate function for vblk computation > > > > - enable vcc-dsi regulator in dsi_runtime_resume > > > > - collect Rob, Acked-by > > > > - update MAINTAINERS file for panel drivers > > > > - cleanup commit messages > > > > - fixed checkpatch warnings/errors > > > > > > > > [1] https://patchwork.kernel.org/cover/10779893/ > > > > > > > > Any inputs? > > > > Jagan. > > > > > > > > Jagan Teki (23): > > > > drm/sun4i: sun6i_mipi_dsi: Compute burst mode loop N1 instruction > > > > delay > > > > drm/sun4i: sun6i_mipi_dsi: Support instruction loop selection > > > > drm/sun4i: sun6i_mipi_dsi: Setup burst mode timings > > > > drm/sun4i: sun6i_mipi_dsi: Simplify drq to support all modes > > > > drm/sun4i: tcon: Export get tcon0 routine > > > > drm/sun4i: sun6i_mipi_dsi: Probe tcon0 during dsi_bind > > > > drm/sun4i: sun6i_mipi_dsi: Setup burst mode > > > > drm/sun4i: sun6i_mipi_dsi: Enable trail_inv and trail_fill controls > > > > drm/sun4i: sun6i_mipi_dsi: Enable HBP, HSA_HSE for burst mode > > > > > > Can you pick these burst changes which are generic to all SoCs. and > > > reset will send once we decide the tcon clock. > > > > These patches don't implement what we discussed last week, and as I > > told you already, most of them really need some work on the commit log > > and their explanations. > > If I'm not wrong, we discussed about tcon_dclk (PLL_MIPI) last week > [1] and these burst changes between 01/23 to 09/23 which are generic > changes to DSI and not related to clock. Apart from that I made few > changes on commit logs between the versions (which I was mentioned on > the cover-letter patch). If any issues issues on commit message, > please let me know so-that I can rework. Look like the same discussion rounding since from months. In fact I have grouped all changes by 'sets of patches' in this series which I was thinking of having more feasibility to review and merge, but seems like it ended-up fusing which patches are more prior and which are fixes. So, let me send it by breaking into different series based on the issues and generic changes.
Here is next version changes for Allwinner A64 MIPI-DSI support This series grouped the changes like previous version[1] with different sets to support three different panels types that can fit into the DSI controller. set:1, for 4-lane, burst mode support - patch 0001: 0009, DSI controller changes that support burst mode. set:2, for A64 DSI support - patch 0010: tcon dclk divider computation based on A64 BSP. - patch 0011: 0017, Allwinner A64 DSI controller changes. set:3, enable 4-lane burst mode panel: - patch 0018: Overlay patch that enable Feiyang FY07024DI26A30-D burst mode panel on Pine64-LTS set:4, enable 4-lane video mode panel: - patch 0019: msg type MIPI_DSI_GENERIC_SHORT_WRITE_2_PARAM support - patch 0020: Overlay patch that enable Bananapi S070WV20-CT16 ICN6211 panel on Bananapi M64 set:5, enable 2-lane video mode panel: - patch 0021, 0022: DSI hfp and hbp timings fixes - patch 0023: Enable Techstar TS8550B panel on Amarula A64-Relic Changes for v7: - moved vcc-dsi binding to required filed. - drop quotes on fallback dphy bindings. - drop min_rate clock pll-mipi patches. - introduce dclk divider computation as like A64 BSP. - add A64 DSI quark patches. - fixed A64 DSI pipeline. - add proper commit messages. - collect Merlijn Wajer Tested-by credits. Changes for v6: - dropped unneeded changes, patches - fixed all burst mode patches as per previous version comments - rebase on master - update proper commit message - dropped unneeded comments - order the patches that make review easy Changes for v5: - collect Rob, Acked-by - droped "Fix VBP size calculation" patch - updated vblk timing calculation. - droped techstar, bananapi dsi panel drivers which may require bridge or other setup. it's under discussion. Changes for v4: - droppoed untested CCU_FEATURE_FIXED_POSTDIV check code in nkm min, max rate patches - create two patches for "Add Allwinner A64 MIPI DSI support" one for has_mod_clk quirk and other one for A64 support - use existing driver code construct for hblk computation - dropped "Increase hfp packet overhead" patch [2], though BSP added this but we have no issues as of now. (no issues on panel side w/o this change) - create separate function for vblk computation - enable vcc-dsi regulator in dsi_runtime_resume - collect Rob, Acked-by - update MAINTAINERS file for panel drivers - cleanup commit messages - fixed checkpatch warnings/errors [1] https://patchwork.kernel.org/cover/10779893/ Any inputs? Jagan. Jagan Teki (23): drm/sun4i: sun6i_mipi_dsi: Compute burst mode loop N1 instruction delay drm/sun4i: sun6i_mipi_dsi: Support instruction loop selection drm/sun4i: sun6i_mipi_dsi: Setup burst mode timings drm/sun4i: sun6i_mipi_dsi: Simplify drq to support all modes drm/sun4i: tcon: Export get tcon0 routine drm/sun4i: sun6i_mipi_dsi: Probe tcon0 during dsi_bind drm/sun4i: sun6i_mipi_dsi: Setup burst mode drm/sun4i: sun6i_mipi_dsi: Enable trail_inv and trail_fill controls drm/sun4i: sun6i_mipi_dsi: Enable HBP, HSA_HSE for burst mode drm/sun4i: tcon: Compute DCLK dividers based on format, lanes dt-bindings: sun6i-dsi: Add VCC-DSI supply property drm/sun4i: sun6i_mipi_dsi: Add support for VCC-DSI voltage regulator dt-bindings: sun6i-dsi: Add A64 MIPI-DSI compatible dt-bindings: sun6i-dsi: Add A64 DPHY compatible (w/ A31 fallback) drm/sun4i: sun6i_mipi_dsi: Add has_mod_clk quirk drm/sun4i: sun6i_mipi_dsi: Add Allwinner A64 MIPI DSI support arm64: dts: allwinner: a64: Add MIPI DSI pipeline [DO NOT MERGE] arm64: allwinner: a64: pine64-lts: Enable Feiyang FY07024DI26A30-D DSI panel drm/sun4i: sun6i_mipi_dsi: Add DSI Generic short write 2 param transfer [DO NOT MERGE] arm64: dts: allwinner: bananapi-m64: Bananapi S070WV20-CT16 DSI panel drm/sun4i: sun6i_mipi_dsi: Fix DSI hbp timing value drm/sun4i: sun6i_mipi_dsi: Fix DSI hfp timing value arm64: dts: allwinner: a64-amarula-relic: Add Techstar TS8550B MIPI-DSI panel .../bindings/display/sunxi/sun6i-dsi.txt | 3 + .../allwinner/sun50i-a64-amarula-relic.dts | 39 ++++ .../dts/allwinner/sun50i-a64-bananapi-m64.dts | 43 ++++ .../dts/allwinner/sun50i-a64-pine64-lts.dts | 39 ++++ arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 45 ++++ drivers/gpu/drm/sun4i/sun4i_tcon.c | 7 +- drivers/gpu/drm/sun4i/sun4i_tcon.h | 1 + drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c | 210 +++++++++++++++--- drivers/gpu/drm/sun4i/sun6i_mipi_dsi.h | 9 + 9 files changed, 367 insertions(+), 29 deletions(-)