mbox series

[v3,0/2] Add support for display port clocks and clock ops

Message ID 20190731182713.8123-1-tdas@codeaurora.org (mailing list archive)
Headers show
Series Add support for display port clocks and clock ops | expand

Message

Taniya Das July 31, 2019, 6:27 p.m. UTC
[v3]
   * Update KCONFIG select in alphabetical order.
   * Remove pr_err in set rate.
   * Fix/update code indentation and logic.
   * removal of CLK_GET_RATE_NOCACHE completely from RCGs.

 [v2]
   * Update KCONFIG to select RATIONAL
   * Clean up redundant code from dp_set_rate/dp_set_rate_and_parent
   * Update the disp_cc_mdss_dp_link_clk_src to use the byte2_ops instead
     of defining the frequencies in KHz.
   * Clean up CLK_GET_RATE_NOCACHE from various RCGs of DP.

 [v1]
   * New display port clock ops supported for display port clocks.
   * Also add support for the display port related branches and RCGs.


Taniya Das (2):
  clk: qcom: rcg2: Add support for display port clock ops
  clk: qcom : dispcc: Add support for display port clocks

 drivers/clk/qcom/Kconfig                      |   1 +
 drivers/clk/qcom/clk-rcg.h                    |   1 +
 drivers/clk/qcom/clk-rcg2.c                   |  77 +++++++
 drivers/clk/qcom/dispcc-sdm845.c              | 214 +++++++++++++++++-
 .../dt-bindings/clock/qcom,dispcc-sdm845.h    |  13 +-
 5 files changed, 304 insertions(+), 2 deletions(-)

--
Qualcomm INDIA, on behalf of Qualcomm Innovation Center, Inc.is a member
of the Code Aurora Forum, hosted by the  Linux Foundation.