[0/4] clk: qcom : add sm8250 LPASS GFM drivers

Message

Srinivas Kandagatla Sept. 17, 2020, 1:28 p.m. UTC

This patchset adds support for GFM Muxes found in LPASS
(Low Power Audio SubSystem) IP in Audio Clock Controller
and Always ON clock controller.

Clocks derived from these muxes are consumed by LPASS Digital Codec.
Currently the driver for Audio and Always ON clock controller only
supports GFM Muxes, however it should be easy to add more clock
support when required.

Srinivas Kandagatla (4):
  dt-bindings: clock: Add support for LPASS Audio Clock Controller
  dt-bindings: clock: Add support for LPASS Always ON Controller
  clk: qcom: Add support to LPASS AUDIO_CC Glitch Free Mux clocks
  clk: qcom: Add support to LPASS AON_CC Glitch Free Mux clocks

 .../bindings/clock/qcom,aoncc-sm8250.yaml     |  58 ++++
 .../bindings/clock/qcom,audiocc-sm8250.yaml   |  58 ++++
 drivers/clk/qcom/Kconfig                      |   7 +
 drivers/clk/qcom/Makefile                     |   1 +
 drivers/clk/qcom/lpass-gfm-sm8250.c           | 296 ++++++++++++++++++
 .../clock/qcom,sm8250-lpass-aoncc.h           |  11 +
 .../clock/qcom,sm8250-lpass-audiocc.h         |  13 +
 7 files changed, 444 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/qcom,aoncc-sm8250.yaml
 create mode 100644 Documentation/devicetree/bindings/clock/qcom,audiocc-sm8250.yaml
 create mode 100644 drivers/clk/qcom/lpass-gfm-sm8250.c
 create mode 100644 include/dt-bindings/clock/qcom,sm8250-lpass-aoncc.h
 create mode 100644 include/dt-bindings/clock/qcom,sm8250-lpass-audiocc.h