mbox series

[v2,0/5] Samsung Galaxy S III Neo Initial DTS

Message ID 20210418122909.71434-1-bartosz.dudziak@snejp.pl (mailing list archive)
Headers show
Series Samsung Galaxy S III Neo Initial DTS | expand


Bartosz Dudziak April 18, 2021, 12:29 p.m. UTC
Enable booting of Samsung Galaxy S III Neo mobile phone with MSM8226 SoC.
Implemented clocks are on top of MSM8974 GCC driver because there is really
little difference between them. UART serial communication is working.

Changes in v2:
 - Removed alphabet sort includes in MSM8974 GCC driver
 - Keep using qcom_cc_probe() function instead of qcom_cc_really_probe()
 - Add only MSM8226 SoC related includes to qcom GCC clock bindings
 - Changed DTS files license to BSD 3 Clause
 - Made changes in qcom-msm8226.dtsi DTS file:
   > Remove occurrences of clock-frequency property from timer nodes 
   > Removed model and compatible properties
   > Renamed pin controller label to "tlmm"
   > Moved compatible and reg properties first in the nodes 
   > Lowercase hex address values
   > Fix make dtbs_check warning in memory node

Bartosz Dudziak (5):
  dt-bindings: clock: qcom: Add MSM8226 GCC clock bindings
  clk: qcom: gcc: Add support for Global Clock controller found on
  arm: dts: qcom: Add support for MSM8226 SoC
  dt-bindings: arm: qcom: Document MSM8226 SoC binding
  arm: dts: qcom: Add initial DTS file for Samsung Galaxy S III Neo

 .../devicetree/bindings/arm/qcom.yaml         |   6 +
 .../devicetree/bindings/clock/qcom,gcc.yaml   |   5 +-
 arch/arm/boot/dts/Makefile                    |   1 +
 .../boot/dts/qcom-msm8226-samsung-s3ve3g.dts  |  25 +++
 arch/arm/boot/dts/qcom-msm8226.dtsi           | 147 +++++++++++++++
 drivers/clk/qcom/gcc-msm8974.c                | 169 +++++++++++++++++-
 6 files changed, 344 insertions(+), 9 deletions(-)
 create mode 100644 arch/arm/boot/dts/qcom-msm8226-samsung-s3ve3g.dts
 create mode 100644 arch/arm/boot/dts/qcom-msm8226.dtsi