mbox series

[0/3] add clock controller of qca8386/qca8084

Message ID 20230801085352.22873-1-quic_luoj@quicinc.com (mailing list archive)
Headers show
Series add clock controller of qca8386/qca8084 | expand

Message

Jie Luo Aug. 1, 2023, 8:53 a.m. UTC 
From: Jie Luo <quic_luoj@quicinc.com>

qca8xxx is 4 * 2.5GBaseT ports chip, working as switch mode
named by qca8386, working as PHY mode named by qca8084,
clock hardware reigster is accessed by MDIO bus.

This patch series add the clock controller of qca8363/qca8084,
and add the clock flag CLK_ENABLE_MUTEX_LOCK to avoid spin lock
used during the clock operation of qca8k clock controller where
the sleep happens when accessing clock control register by MDIO
bus.

Luo Jie (3):
  clk: Add the flag CLK_ENABLE_MUTEX_LOCK of enabling clock
  dt-bindings: clock: add qca8386/qca8084 clock and reset definitions
  clk: qcom: add clock controller driver for qca8386/qca8084

 .../bindings/clock/qcom,nsscc-qca8k.yaml      |   59 +
 drivers/clk/clk.c                             |   78 +-
 drivers/clk/qcom/Kconfig                      |    8 +
 drivers/clk/qcom/Makefile                     |    1 +
 drivers/clk/qcom/nsscc-qca8k.c                | 2205 +++++++++++++++++
 include/dt-bindings/clock/qcom,nsscc-qca8k.h  |  102 +
 include/dt-bindings/reset/qcom,nsscc-qca8k.h  |   76 +
 include/linux/clk-provider.h                  |    4 +
 8 files changed, 2519 insertions(+), 14 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/clock/qcom,nsscc-qca8k.yaml
 create mode 100644 drivers/clk/qcom/nsscc-qca8k.c
 create mode 100644 include/dt-bindings/clock/qcom,nsscc-qca8k.h
 create mode 100644 include/dt-bindings/reset/qcom,nsscc-qca8k.h


base-commit: ec89391563792edd11d138a853901bce76d11f44