[V3,0/8] Add camera clock controller support for SM8150

Message

Satya Priya Kakitapalli July 31, 2024, 6:29 a.m. UTC

Add camcc support and Regera PLL ops. Also, fix the pll post div mask.

Changes in V3:
 - Split the fixes into separate patches, remove RETAIN_FF flag for
   gdscs and document the BIT(15) of pll alpha value.
 - Link to v2: https://lore.kernel.org/all/[e-mail]

Changes in v2:
 - As per Konrad's comments, re-use the zonda pll code for regera, as
   both are mostly same.
 - Fix the zonda_set_rate API and also the pll_post_div shift used in
   trion pll post div set rate API
 - Link to v1: https://lore.kernel.org/r/[e-mail]


Satya Priya Kakitapalli (7):
  clk: qcom: clk-alpha-pll: Fix the pll post div mask
  clk: qcom: clk-alpha-pll: Fix the trion pll postdiv set rate API
  clk: qcom: clk-alpha-pll: Fix zonda set_rate failure when PLL is
    disabled
  clk: qcom: clk-alpha-pll: Update set_rate for Zonda PLL
  dt-bindings: clock: qcom: Add SM8150 camera clock controller
  clk: qcom: Add camera clock controller driver for SM8150
  arm64: dts: qcom: Add camera clock controller for sm8150

Taniya Das (1):
  clk: qcom: clk-alpha-pll: Add support for Regera PLL ops

 .../bindings/clock/qcom,sm8150-camcc.yaml     |   77 +
 arch/arm64/boot/dts/qcom/sa8155p.dtsi         |    4 +
 arch/arm64/boot/dts/qcom/sm8150.dtsi          |   13 +
 drivers/clk/qcom/Kconfig                      |    9 +
 drivers/clk/qcom/Makefile                     |    1 +
 drivers/clk/qcom/camcc-sm8150.c               | 2159 +++++++++++++++++
 drivers/clk/qcom/clk-alpha-pll.c              |   57 +-
 drivers/clk/qcom/clk-alpha-pll.h              |    5 +
 include/dt-bindings/clock/qcom,sm8150-camcc.h |  135 ++
 9 files changed, 2456 insertions(+), 4 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/clock/qcom,sm8150-camcc.yaml
 create mode 100644 drivers/clk/qcom/camcc-sm8150.c
 create mode 100644 include/dt-bindings/clock/qcom,sm8150-camcc.h

Comments

Bjorn Andersson Aug. 1, 2024, 3:19 a.m. UTC | #1

On Wed, 31 Jul 2024 11:59:08 +0530, Satya Priya Kakitapalli wrote:
> Add camcc support and Regera PLL ops. Also, fix the pll post div mask.
> 
> Changes in V3:
>  - Split the fixes into separate patches, remove RETAIN_FF flag for
>    gdscs and document the BIT(15) of pll alpha value.
>  - Link to v2: https://lore.kernel.org/all/[e-mail]
> 
> [...]

Applied, thanks!

[8/8] arm64: dts: qcom: Add camera clock controller for sm8150
      commit: f75537a42afbbe3f652c73493741448586df7719

Best regards,