Show patches with: State = Action Required       |    Archived = No       |   77 patches
Patch Series A/R/T S/W/F Date Submitter Delegate State
[v4,1/2] clk: starfive: jh7110-sys: Add notifier for PLL clock Add notifier for PLL0 clock and set it 1.5GHz on - - - --- 2024-04-10 Xingyu Wu New
clk: rockchip: rk3568: Add PLL rate for 724 MHz clk: rockchip: rk3568: Add PLL rate for 724 MHz - - - --- 2024-05-03 Lucas Stach Under Review
[v2,11/11] MIPS: mobileye: eyeq5: add OLB system-controller node Add Mobileye EyeQ system controller support (clk, reset, pinctrl) - - - --- 2024-05-03 Théo Lebrun Under Review
[v2,10/11] pinctrl: eyeq5: add platform driver Add Mobileye EyeQ system controller support (clk, reset, pinctrl) - 1 - --- 2024-05-03 Théo Lebrun Under Review
[v2,09/11] reset: eyeq: add platform driver Add Mobileye EyeQ system controller support (clk, reset, pinctrl) - - - --- 2024-05-03 Théo Lebrun Under Review
[v2,08/11] clk: eyeq: add driver Add Mobileye EyeQ system controller support (clk, reset, pinctrl) - - - --- 2024-05-03 Théo Lebrun Under Review
[v2,07/11] clk: divider: Introduce CLK_DIVIDER_EVEN_INTEGERS flag Add Mobileye EyeQ system controller support (clk, reset, pinctrl) - - - --- 2024-05-03 Théo Lebrun Under Review
[v2,06/11] mfd: olb: Add support for Mobileye OLB system-controller Add Mobileye EyeQ system controller support (clk, reset, pinctrl) - - - --- 2024-05-03 Théo Lebrun Under Review
[v2,05/11] mfd: Add cell device name Add Mobileye EyeQ system controller support (clk, reset, pinctrl) - - - --- 2024-05-03 Théo Lebrun Under Review
[v2,04/11] driver core: platform: Introduce platform_device_add_with_name() Add Mobileye EyeQ system controller support (clk, reset, pinctrl) - - - --- 2024-05-03 Théo Lebrun Under Review
[v2,03/11] dt-bindings: soc: mobileye: add EyeQ OLB system controller Add Mobileye EyeQ system controller support (clk, reset, pinctrl) - - - --- 2024-05-03 Théo Lebrun Under Review
[v2,02/11] dt-bindings: clock: mobileye,eyeq5-reset: drop bindings Add Mobileye EyeQ system controller support (clk, reset, pinctrl) - - - --- 2024-05-03 Théo Lebrun Under Review
[v2,01/11] dt-bindings: clock: mobileye,eyeq5-clk: drop bindings Add Mobileye EyeQ system controller support (clk, reset, pinctrl) - - - --- 2024-05-03 Théo Lebrun Under Review
[GIT,PULL] clk: meson: amlogic updates for v6.10 [GIT,PULL] clk: meson: amlogic updates for v6.10 - - - --- 2024-05-03 Jerome Brunet Under Review
clk: qcom: Park shared RCGs upon registration clk: qcom: Park shared RCGs upon registration - 1 - --- 2024-05-02 Stephen Boyd Under Review
[v12,6/6] ARM: dts: wpcm450: Switch clocks to clock controller Nuvoton WPCM450 clock and reset driver - - - --- 2024-05-02 Jonathan Neuschäfer Under Review
[v12,5/6] ARM: dts: wpcm450: Remove clock-output-names from reference clock node Nuvoton WPCM450 clock and reset driver - - - --- 2024-05-02 Jonathan Neuschäfer Under Review
[v12,4/6] clk: wpcm450: Add Nuvoton WPCM450 clock/reset controller driver Nuvoton WPCM450 clock and reset driver - 1 - --- 2024-05-02 Jonathan Neuschäfer Under Review
[v12,3/6] clk: provider: Address documentation pitfall in struct clk_parent_data Nuvoton WPCM450 clock and reset driver - - - --- 2024-05-02 Jonathan Neuschäfer Under Review
[v12,2/6] clk: Introduce devm_clk_hw_register_divider_table_parent_data() Nuvoton WPCM450 clock and reset driver - - - --- 2024-05-02 Jonathan Neuschäfer Under Review
[v12,1/6] dt-bindings: clock: Add Nuvoton WPCM450 clock/reset controller Nuvoton WPCM450 clock and reset driver - 1 - --- 2024-05-02 Jonathan Neuschäfer Under Review
[v2] dt-bindings: clock: fixed: Define a preferred node name [v2] dt-bindings: clock: fixed: Define a preferred node name 1 - - --- 2024-04-30 Rob Herring (Arm) Under Review
[v8,5/5] clk: meson: c3: add c3 clock peripherals controller driver Add C3 SoC PLLs and Peripheral clock - - - --- 2024-04-30 Xianwei Zhao Under Review
[v8,4/5] clk: meson: c3: add support for the C3 SoC PLL clock Add C3 SoC PLLs and Peripheral clock - - - --- 2024-04-30 Xianwei Zhao Under Review
[v8,3/5] dt-bindings: clock: add Amlogic C3 peripherals clock controller Add C3 SoC PLLs and Peripheral clock - 1 - --- 2024-04-30 Xianwei Zhao Under Review
[v8,2/5] dt-bindings: clock: add Amlogic C3 SCMI clock controller support Add C3 SoC PLLs and Peripheral clock 1 - - --- 2024-04-30 Xianwei Zhao Under Review
[v8,1/5] dt-bindings: clock: add Amlogic C3 PLL clock controller Add C3 SoC PLLs and Peripheral clock - 1 - --- 2024-04-30 Xianwei Zhao Under Review
[v11,6/6] arm64: dts: qcom: ipq9574: Add icc provider ability to gcc Add interconnect driver for IPQ9574 SoC - 1 - --- 2024-04-30 Varadarajan Narayanan Under Review
[v11,5/6] clk: qcom: ipq9574: Use icc-clk for enabling NoC related clocks Add interconnect driver for IPQ9574 SoC - - - --- 2024-04-30 Varadarajan Narayanan Under Review
[v11,4/6] clk: qcom: common: Add interconnect clocks support Add interconnect driver for IPQ9574 SoC - - - --- 2024-04-30 Varadarajan Narayanan Under Review
[v11,3/6] interconnect: icc-clk: Add devm_icc_clk_register Add interconnect driver for IPQ9574 SoC 1 1 - --- 2024-04-30 Varadarajan Narayanan Under Review
[v11,2/6] dt-bindings: interconnect: Add Qualcomm IPQ9574 support Add interconnect driver for IPQ9574 SoC 1 1 - --- 2024-04-30 Varadarajan Narayanan Under Review
[v11,1/6] interconnect: icc-clk: Specify master/slave ids Add interconnect driver for IPQ9574 SoC 1 - - --- 2024-04-30 Varadarajan Narayanan Under Review
[v10,12/12] MAINTAINERS: add myself as Marvell PXA1908 maintainer Initial Marvell PXA1908 support - - - --- 2024-04-24 Duje Mihanović via B4 Relay Under Review
[v10,11/12] arm64: dts: Add DTS for Marvell PXA1908 and samsung,coreprimevelte Initial Marvell PXA1908 support - - - --- 2024-04-24 Duje Mihanović via B4 Relay Under Review
[v10,10/12] arm64: Kconfig.platforms: Add config for Marvell PXA1908 platform Initial Marvell PXA1908 support - - - --- 2024-04-24 Duje Mihanović via B4 Relay Under Review
[v10,09/12] dt-bindings: marvell: Document PXA1908 SoC Initial Marvell PXA1908 support - 1 - --- 2024-04-24 Duje Mihanović via B4 Relay Under Review
[v10,08/12] clk: mmp: Add Marvell PXA1908 MPMU driver Initial Marvell PXA1908 support - - - --- 2024-04-24 Duje Mihanović via B4 Relay Under Review
[v10,07/12] clk: mmp: Add Marvell PXA1908 APMU driver Initial Marvell PXA1908 support - - - --- 2024-04-24 Duje Mihanović via B4 Relay Under Review
[v10,06/12] clk: mmp: Add Marvell PXA1908 APBCP driver Initial Marvell PXA1908 support - - - --- 2024-04-24 Duje Mihanović via B4 Relay Under Review
[v10,05/12] clk: mmp: Add Marvell PXA1908 APBC driver Initial Marvell PXA1908 support - - - --- 2024-04-24 Duje Mihanović via B4 Relay Under Review
[v10,04/12] dt-bindings: clock: Add Marvell PXA1908 clock bindings Initial Marvell PXA1908 support - 2 - --- 2024-04-24 Duje Mihanović via B4 Relay Under Review
[v10,03/12] pinctrl: single: add marvell,pxa1908-padconf compatible Initial Marvell PXA1908 support 1 - - --- 2024-04-24 Duje Mihanović via B4 Relay Under Review
[v10,02/12] dt-bindings: pinctrl: pinctrl-single: add marvell,pxa1908-padconf compatible Initial Marvell PXA1908 support 1 1 - --- 2024-04-24 Duje Mihanović via B4 Relay Under Review
[v10,01/12] clk: mmp: Switch to use struct u32_fract instead of custom one Initial Marvell PXA1908 support - 2 1 --- 2024-04-24 Duje Mihanović via B4 Relay Under Review
[3/4] clk: stm32mp25: add security clocks Use STM32 access controller for STM32MP25 clocks - - - --- 2024-04-19 Gabriel FERNANDEZ Under Review
[2/4] clk: stm32mp2: use of STM32 access controller Use STM32 access controller for STM32MP25 clocks - - - --- 2024-04-19 Gabriel FERNANDEZ Under Review
[1/4] dt-bindings: clocks: stm32mp25: add access-controllers description Use STM32 access controller for STM32MP25 clocks 1 - - --- 2024-04-19 Gabriel FERNANDEZ Under Review
[v10,13/13] clk: hisilicon: Migrate devm APIs clk: hisilicon: Migrate devm APIs - - - --- 2024-04-16 David Yang Under Review
[v10,12/13] clk: hisilicon: hix5hd2: Convert into platform driver module clk: hisilicon: Migrate devm APIs - - - --- 2024-04-16 David Yang Under Review
[v10,11/13] clk: hisilicon: hip04: Convert into platform driver module clk: hisilicon: Migrate devm APIs - - - --- 2024-04-16 David Yang Under Review
[v10,10/13] clk: hisilicon: hi6220: Convert into platform driver module clk: hisilicon: Migrate devm APIs - - - --- 2024-04-16 David Yang Under Review
[v10,09/13] clk: hisilicon: hi3620: Convert into platform driver module clk: hisilicon: Migrate devm APIs - - - --- 2024-04-16 David Yang Under Review
[v10,08/13] clk: hisilicon: hi3670: Convert into module clk: hisilicon: Migrate devm APIs - - - --- 2024-04-16 David Yang Under Review
[v10,07/13] clk: hisilicon: hi3660: Convert into module clk: hisilicon: Migrate devm APIs - - - --- 2024-04-16 David Yang Under Review
[v10,06/13] clk: hisilicon: Remove hisi_crg_funcs clk: hisilicon: Migrate devm APIs - - - --- 2024-04-16 David Yang Under Review
[v10,05/13] clk: hisilicon: hi3559a: Use helper functions clk: hisilicon: Migrate devm APIs - - - --- 2024-04-16 David Yang Under Review
[v10,04/13] clk: hisilicon: hi3519: Use helper functions clk: hisilicon: Migrate devm APIs - - - --- 2024-04-16 David Yang Under Review
[v10,03/13] clk: hisilicon: hi3798cv200: Use helper functions clk: hisilicon: Migrate devm APIs - - - --- 2024-04-16 David Yang Under Review
[v10,02/13] clk: hisilicon: hi3516cv300: Use helper functions clk: hisilicon: Migrate devm APIs - - - --- 2024-04-16 David Yang Under Review
[v10,01/13] clk: hisilicon: Add helper functions for platform driver clk: hisilicon: Migrate devm APIs - - - --- 2024-04-16 David Yang Under Review
[v2,4/4] soc: Add SoC driver for Cirrus ep93xx DONOTMERGE: ep93xx-clk from ep93xx device tree conversion 1 1 1 --- 2024-04-14 Nikita Shubin via B4 Relay Under Review
[v2,3/4] dt-bindings: soc: Add Cirrus EP93xx DONOTMERGE: ep93xx-clk from ep93xx device tree conversion - 2 - --- 2024-04-14 Nikita Shubin via B4 Relay Under Review
[v2,2/4] clk: ep93xx: add DT support for Cirrus EP93xx DONOTMERGE: ep93xx-clk from ep93xx device tree conversion - - - --- 2024-04-14 Nikita Shubin via B4 Relay Under Review
[v2,1/4] ARM: ep93xx: add regmap aux_dev DONOTMERGE: ep93xx-clk from ep93xx device tree conversion - 2 1 --- 2024-04-14 Nikita Shubin via B4 Relay Under Review
[v2,1/1] clk: imgtec: use %pe for better readability of errors while printing [v2,1/1] clk: imgtec: use %pe for better readability of errors while printing - - - --- 2024-04-12 Onkarnarth Under Review
[2/2] clk: qcom: Properly initialize shared RCGs upon registration Fix a black screen on sc7180 Trogdor devices - - - --- 2024-03-27 Stephen Boyd Under Review
[1/2] clk: qcom: dispcc-sc7180: Force off rotator clk at probe Fix a black screen on sc7180 Trogdor devices - - - --- 2024-03-27 Stephen Boyd Under Review
[v3] clk: set initial best mux parent to current parent with CLK_MUX_ROUND_CLOSEST [v3] clk: set initial best mux parent to current parent with CLK_MUX_ROUND_CLOSEST - - - --- 2024-03-07 Yang Xiwen via B4 Relay Under Review
[v9,2/9] clk: eyeq5: add platform driver, and init routine at of_clk_init() Add support for Mobileye EyeQ5 system controller - - - --- 2024-03-01 Théo Lebrun Under Review
[RFC] clk: add a new clock type for clock rates [RFC] clk: add a new clock type for clock rates - - - --- 2024-02-19 Nuno Sa Under Review
[v5,01/13] clk: fixed-factor: add optional accuracy support Add support for Mobileye EyeQ5 system controller - - - --- 2024-02-09 Théo Lebrun Under Review
[v2,2/7] dt-bindings: clock: google,gs101-clock: add PERIC1 clock management unit gs101 oriole: peripheral block 1 (peric1) and i2c12 support - 3 - --- 2024-01-29 André Draszik Under Review
[v2,1/7] clk: samsung: gs-101: drop extra empty line gs101 oriole: peripheral block 1 (peric1) and i2c12 support - 3 - --- 2024-01-29 André Draszik Under Review
[06/10] watchdog: rzg2l_wdt: Rely on the reset driver for doing proper reset watchdog: rzg2l_wdt: Add support for RZ/G3S - - - --- 2024-01-22 Claudiu Under Review
[v2] clk: fixed: handle failed clk setup [v2] clk: fixed: handle failed clk setup - - - --- 2023-10-26 Emil Abildgaard Svendsen Under Review
clk: change clk_hw_create_clk() to avoid being unable to remove module clk: change clk_hw_create_clk() to avoid being unable to remove module - - - --- 2023-04-13 Heiner Kallweit Under Review