[v4,8/8] clk: bd718x7: Initial support for ROHM bd71837/bd71847 PMIC clock

Commit Message

Vaittinen, Matti Nov. 13, 2018, 12:03 p.m. UTC

ROHM bd71837 and bd71847 contain 32768Hz clock gate. Support the clock
using generic clock framework.

Signed-off-by: Matti Vaittinen <[e-mail]>
---
 drivers/clk/Kconfig       |   7 +++
 drivers/clk/Makefile      |   1 +
 drivers/clk/clk-bd718x7.c | 131 ++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 139 insertions(+)
 create mode 100644 drivers/clk/clk-bd718x7.c

Patch

diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index 81cdb4eaca07..2dc12bf75b1b 100644
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -283,6 +283,13 @@  config COMMON_CLK_STM32H7
 	---help---
 	  Support for stm32h7 SoC family clocks
 
+config COMMON_CLK_BD718XX
+	tristate "Clock driver for ROHM BD718x7 PMIC"
+	depends on MFD_ROHM_BD718XX
+	help
+	  This driver supports ROHM BD71837 and ROHM BD71847
+	  PMICs clock gates.
+
 source "drivers/clk/actions/Kconfig"
 source "drivers/clk/bcm/Kconfig"
 source "drivers/clk/hisilicon/Kconfig"
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index 72be7a38cff1..a47430b387db 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -21,6 +21,7 @@  endif
 obj-$(CONFIG_MACH_ASM9260)		+= clk-asm9260.o
 obj-$(CONFIG_COMMON_CLK_AXI_CLKGEN)	+= clk-axi-clkgen.o
 obj-$(CONFIG_ARCH_AXXIA)		+= clk-axm5516.o
+obj-$(CONFIG_COMMON_CLK_BD718XX)	+= clk-bd718x7.o
 obj-$(CONFIG_COMMON_CLK_CDCE706)	+= clk-cdce706.o
 obj-$(CONFIG_COMMON_CLK_CDCE925)	+= clk-cdce925.o
 obj-$(CONFIG_ARCH_CLPS711X)		+= clk-clps711x.o
diff --git a/drivers/clk/clk-bd718x7.c b/drivers/clk/clk-bd718x7.c
new file mode 100644
index 000000000000..df5f1068ce8e
--- /dev/null
+++ b/drivers/clk/clk-bd718x7.c
@@ -0,0 +1,131 @@ 
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (C) 2018 ROHM Semiconductors
+// bd71837.c  -- ROHM BD71837MWV clock driver
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/mfd/rohm-bd718x7.h>
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
+#include <linux/regmap.h>
+
+struct bd718xx_clk {
+	struct clk_hw hw;
+	u8 reg;
+	u8 mask;
+	struct platform_device *pdev;
+	struct bd718xx *mfd;
+};
+
+static int bd71837_clk_set(struct clk_hw *hw, int status)
+{
+	struct bd718xx_clk *c = container_of(hw, struct bd718xx_clk, hw);
+
+	return regmap_update_bits(c->mfd->regmap, c->reg, c->mask, status);
+}
+
+static void bd71837_clk_disable(struct clk_hw *hw)
+{
+	int rv;
+	struct bd718xx_clk *c = container_of(hw, struct bd718xx_clk, hw);
+
+	rv = bd71837_clk_set(hw, 0);
+	if (rv)
+		dev_dbg(&c->pdev->dev, "Failed to disable 32K clk (%d)\n", rv);
+}
+
+static int bd71837_clk_enable(struct clk_hw *hw)
+{
+	return bd71837_clk_set(hw, 1);
+}
+
+static int bd71837_clk_is_enabled(struct clk_hw *hw)
+{
+	int enabled;
+	int rval;
+	struct bd718xx_clk *c = container_of(hw, struct bd718xx_clk, hw);
+
+	rval = regmap_read(c->mfd->regmap, c->reg, &enabled);
+
+	if (rval)
+		return rval;
+
+	return enabled & c->mask;
+}
+
+static const struct clk_ops bd71837_clk_ops = {
+	.prepare = &bd71837_clk_enable,
+	.unprepare = &bd71837_clk_disable,
+	.is_prepared = &bd71837_clk_is_enabled,
+};
+
+static int bd71837_clk_probe(struct platform_device *pdev)
+{
+	struct bd718xx_clk *c;
+	int rval = -ENOMEM;
+	const char *parent_clk;
+	struct device *parent = pdev->dev.parent;
+	struct bd718xx *mfd = dev_get_drvdata(parent);
+	struct clk_init_data init = {
+		.name = "bd718xx-32k-out",
+		.ops = &bd71837_clk_ops,
+	};
+
+	c = devm_kzalloc(&pdev->dev, sizeof(*c), GFP_KERNEL);
+	if (!c)
+		return -ENOMEM;
+
+	init.num_parents = 1;
+	parent_clk = of_clk_get_parent_name(parent->of_node, 0);
+
+	init.parent_names = &parent_clk;
+	if (!parent_clk) {
+		dev_err(&pdev->dev, "No parent clk found\n");
+		return -EINVAL;
+	}
+
+	c->reg = BD718XX_REG_OUT32K;
+	c->mask = BD718XX_OUT32K_EN;
+	c->mfd = mfd;
+	c->pdev = pdev;
+	c->hw.init = &init;
+
+	of_property_read_string_index(parent->of_node,
+				      "clock-output-names", 0, &init.name);
+
+	rval = devm_clk_hw_register(&pdev->dev, &c->hw);
+	if (!rval) {
+		rval = devm_clk_hw_register_clkdev(&pdev->dev,
+						   &c->hw, init.name, NULL);
+		if (rval)
+			dev_warn(&pdev->dev, "Failed to register clkdev\n");
+		if (parent->of_node) {
+			rval = devm_of_clk_add_parent_hw_provider(&pdev->dev,
+					     of_clk_hw_simple_get, &c->hw);
+			if (rval)
+				dev_err(&pdev->dev,
+					"adding clk provider failed\n");
+		}
+	} else {
+		dev_err(&pdev->dev, "failed to register 32K clk");
+	}
+
+	return rval;
+}
+
+static struct platform_driver bd71837_clk = {
+	.driver = {
+		.name = "bd718xx-clk",
+	},
+	.probe = bd71837_clk_probe,
+};
+
+module_platform_driver(bd71837_clk);
+
+MODULE_AUTHOR("Matti Vaittinen <[e-mail]>");
+MODULE_DESCRIPTION("BD71837 chip clk driver");
+MODULE_LICENSE("GPL");