new file mode 100644
@@ -0,0 +1,258 @@
+Allwinner A10 Display Pipeline
+==============================
+
+The Allwinner A10 Display pipeline is composed of several components
+that are going to be documented below:
+
+TV Encoder
+----------
+
+The TV Encoder supports the composite and VGA output. It is one end of
+the pipeline.
+
+Required properties:
+ - compatible: value should be "allwinner,sun4i-a10-tv-encoder".
+ - reg: base address and size of memory-mapped region
+ - clocks: the clocks driving the TV encoder
+ - resets: phandle to the reset controller driving the encoder
+
+- ports: A ports node with endpoint definitions as defined in
+ Documentation/devicetree/bindings/media/video-interfaces.txt. The
+ first port should be the input endpoint.
+
+TCON
+----
+
+The TCON acts as a timing controller for RGB, LVDS and TV interfaces.
+
+Required properties:
+ - compatible: value should be "allwinner,sun5i-a13-tcon".
+ - reg: base address and size of memory-mapped region
+ - interrupts: interrupt associated to this IP
+ - clocks: phandles to the clocks feeding the TCON. Three are needed:
+ - 'ahb': the interface clocks
+ - 'tcon-ch0': The clock driving the TCON channel 0
+ - 'tcon-ch1': The clock driving the TCON channel 1
+ - resets: phandles to the reset controllers driving the encoder
+ - "lcd": the reset line for the TCON channel 0
+
+ - clock-names: the clock names mentioned above
+ - reset-names: the reset names mentioned above
+ - clock-output-names: Name of the pixel clock created
+
+- ports: A ports node with endpoint definitions as defined in
+ Documentation/devicetree/bindings/media/video-interfaces.txt. The
+ first port should be the input endpoint, the second one the output
+
+ The output should have two endpoints. The first is the block
+ connected to the TCON channel 0 (usually a panel or a bridge), the
+ second the block connected to the TCON channel 1 (usually the TV
+ encoder)
+
+
+Display Engine Backend
+----------------------
+
+The display engine backend exposes layers and sprites to the
+system.
+
+Required properties:
+ - compatible: value must be one of:
+ * allwinner,sun5i-a13-display-backend
+ - reg: base address and size of the memory-mapped region.
+ - clocks: phandles to the clocks feeding the frontend and backend
+ * ahb: the backend interface clock
+ * mod: the backend module clock
+ * ram: the backend DRAM clock
+ - clock-names: the clock names mentioned above
+ - resets: phandles to the reset controllers driving the backend
+
+- ports: A ports node with endpoint definitions as defined in
+ Documentation/devicetree/bindings/media/video-interfaces.txt. The
+ first port should be the input endpoints, the second one the output
+
+Display Engine Frontend
+-----------------------
+
+The display engine frontend does formats conversion, scaling,
+deinterlacing and color space conversion.
+
+Required properties:
+ - compatible: value must be one of:
+ * allwinner,sun5i-a13-display-frontend
+ - reg: base address and size of the memory-mapped region.
+ - interrupts: interrupt associated to this IP
+ - clocks: phandles to the clocks feeding the frontend and backend
+ * ahb: the backend interface clock
+ * mod: the backend module clock
+ * ram: the backend DRAM clock
+ - clock-names: the clock names mentioned above
+ - resets: phandles to the reset controllers driving the backend
+
+- ports: A ports node with endpoint definitions as defined in
+ Documentation/devicetree/bindings/media/video-interfaces.txt. The
+ first port should be the input endpoints, the second one the outputs
+
+
+Display Engine Pipeline
+-----------------------
+
+The display engine pipeline (and its entry point, since it can be
+either directly the backend or the frontend) is represented as an
+extra node.
+
+Required properties:
+ - compatible: value must be one of:
+ * allwinner,sun5i-a13-display-engine
+
+ - allwinner,pipelines: list of phandle to the display engine
+ frontends available.
+
+Example:
+
+panel: panel {
+ compatible = "olimex,lcd-olinuxino-43-ts";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ panel_input: endpoint {
+ remote-endpoint = <&tcon0_out_panel>;
+ };
+ };
+};
+
+tve0: tv-encoder@01c0a000 {
+ compatible = "allwinner,sun4i-a10-tv-encoder";
+ reg = <0x01c0a000 0x1000>;
+ clocks = <&ahb_gates 34>;
+ resets = <&tcon_ch0_clk 0>;
+
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ tve0_in_tcon0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&tcon0_out_tve0>;
+ };
+ };
+};
+
+tcon0: lcd-controller@1c0c000 {
+ compatible = "allwinner,sun5i-a13-tcon";
+ reg = <0x01c0c000 0x1000>;
+ interrupts = <44>;
+ resets = <&tcon_ch0_clk 1>;
+ reset-names = "lcd";
+ clocks = <&ahb_gates 36>,
+ <&tcon_ch0_clk>,
+ <&tcon_ch1_clk>;
+ clock-names = "ahb",
+ "tcon-ch0",
+ "tcon-ch1";
+ clock-output-names = "tcon-pixel-clock";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ tcon0_in: port@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ tcon0_in_be0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&be0_out_tcon0>;
+ };
+ };
+
+ tcon0_out: port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ tcon0_out_panel: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&panel_input>;
+ };
+
+ tcon0_out_tve0: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&tve0_in_tcon0>;
+ };
+ };
+ };
+};
+
+fe0: display-frontend@1e00000 {
+ compatible = "allwinner,sun5i-a13-display-frontend";
+ reg = <0x01e00000 0x20000>;
+ interrupts = <47>;
+ clocks = <&ahb_gates 46>, <&de_fe_clk>,
+ <&dram_gates 25>;
+ clock-names = "ahb", "mod",
+ "ram";
+ resets = <&de_fe_clk>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fe0_out: port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ fe0_out_be0: endpoint {
+ remote-endpoint = <&be0_in_fe0>;
+ };
+ };
+ };
+};
+
+be0: display-backend@1e60000 {
+ compatible = "allwinner,sun5i-a13-display-backend";
+ reg = <0x01e60000 0x10000>;
+ clocks = <&ahb_gates 44>, <&de_be_clk>,
+ <&dram_gates 26>;
+ clock-names = "ahb", "mod",
+ "ram";
+ resets = <&de_be_clk>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ be0_in: port@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ be0_in_fe0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&fe0_out_be0>;
+ };
+ };
+
+ be0_out: port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ be0_out_tcon0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&tcon0_in_be0>;
+ };
+ };
+ };
+};
+
+display-engine {
+ compatible = "allwinner,sun5i-a13-display-engine";
+ pipelines = <&fe0>;
+};
The display pipeline of the Allwinner A10 is involving several loosely coupled components. Add a documentation for the bindings. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> --- .../bindings/display/sunxi/sun4i-drm.txt | 258 +++++++++++++++++++++ 1 file changed, 258 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt