| Message ID | 1462417950-46796-4-git-send-email-yangbo.lu@nxp.com (mailing list archive) |
|---|---|
| State | Not Applicable, archived |
| Headers | show |
On Wed, May 4, 2016 at 11:12 PM, Yangbo Lu <yangbo.lu@nxp.com> wrote: > The global utilities block controls power management, I/O device > enabling, power-onreset(POR) configuration monitoring, alternate > function selection for multiplexed signals,and clock control. > > This patch adds GUTS driver to manage and access global utilities > block. > > Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> > Acked-by: Scott Wood <oss@buserror.net> > --- > Changes for v4: > - Added this patch > Changes for v5: > - Modified copyright info > - Changed MODULE_LICENSE to GPL > - Changed EXPORT_SYMBOL_GPL to EXPORT_SYMBOL > - Made FSL_GUTS user-invisible > - Added a complete compatible list for GUTS > - Stored guts info in file-scope variable > - Added mfspr() getting SVR > - Redefined GUTS APIs > - Called fsl_guts_init rather than using platform driver > - Removed useless parentheses > - Removed useless 'extern' key words > Changes for v6: > - Made guts thread safe in fsl_guts_init > Changes for v7: > - Removed 'ifdef' for function declaration in guts.h > Changes for v8: > - Fixes lines longer than 80 characters checkpatch issue > - Added 'Acked-by: Scott Wood' > Changes for v9: > - None > Changes for v10: > - None > --- > drivers/soc/Kconfig | 2 +- > drivers/soc/fsl/Kconfig | 8 +++ > drivers/soc/fsl/Makefile | 1 + > drivers/soc/fsl/guts.c | 119 ++++++++++++++++++++++++++++++++++++++++++++ > include/linux/fsl/guts.h | 126 +++++++++++++++++++++++++++++------------------ > 5 files changed, 207 insertions(+), 49 deletions(-) > create mode 100644 drivers/soc/fsl/Kconfig > create mode 100644 drivers/soc/fsl/guts.c > > diff --git a/drivers/soc/Kconfig b/drivers/soc/Kconfig > index cb58ef0..7106463 100644 > --- a/drivers/soc/Kconfig > +++ b/drivers/soc/Kconfig > @@ -2,7 +2,7 @@ menu "SOC (System On Chip) specific Drivers" > > source "drivers/soc/bcm/Kconfig" > source "drivers/soc/brcmstb/Kconfig" > -source "drivers/soc/fsl/qe/Kconfig" > +source "drivers/soc/fsl/Kconfig" > source "drivers/soc/mediatek/Kconfig" > source "drivers/soc/qcom/Kconfig" > source "drivers/soc/rockchip/Kconfig" > diff --git a/drivers/soc/fsl/Kconfig b/drivers/soc/fsl/Kconfig > new file mode 100644 > index 0000000..b313759 > --- /dev/null > +++ b/drivers/soc/fsl/Kconfig > @@ -0,0 +1,8 @@ > +# > +# Freescale SOC drivers > +# > + > +source "drivers/soc/fsl/qe/Kconfig" > + > +config FSL_GUTS > + bool > diff --git a/drivers/soc/fsl/Makefile b/drivers/soc/fsl/Makefile > index 203307f..02afb7f 100644 > --- a/drivers/soc/fsl/Makefile > +++ b/drivers/soc/fsl/Makefile > @@ -4,3 +4,4 @@ > > obj-$(CONFIG_QUICC_ENGINE) += qe/ > obj-$(CONFIG_CPM) += qe/ > +obj-$(CONFIG_FSL_GUTS) += guts.o > diff --git a/drivers/soc/fsl/guts.c b/drivers/soc/fsl/guts.c > new file mode 100644 > index 0000000..fa155e6 > --- /dev/null > +++ b/drivers/soc/fsl/guts.c > @@ -0,0 +1,119 @@ > +/* > + * Freescale QorIQ Platforms GUTS Driver > + * > + * Copyright (C) 2016 Freescale Semiconductor, Inc. > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License as published by > + * the Free Software Foundation; either version 2 of the License, or > + * (at your option) any later version. > + */ > + > +#include <linux/io.h> > +#include <linux/module.h> Seems there was lots of discussion on this. If it does end up being resent, it would be nice to get the module.h and other modular stuff gone since it is a bool Kconfig. Thanks, Paul. -- > +#include <linux/slab.h> > +#include <linux/mutex.h> > +#include <linux/of_address.h> > +#include <linux/of_platform.h> > +#include <linux/fsl/guts.h> > + > -- To unsubscribe from this list: send the line "unsubscribe linux-clk" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Fri, 2016-07-15 at 12:43 -0400, Paul Gortmaker wrote: > On Wed, May 4, 2016 at 11:12 PM, Yangbo Lu <yangbo.lu@nxp.com> wrote: > > > > The global utilities block controls power management, I/O device > > enabling, power-onreset(POR) configuration monitoring, alternate > > function selection for multiplexed signals,and clock control. > > > > This patch adds GUTS driver to manage and access global utilities > > block. > > > > Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> > > Acked-by: Scott Wood <oss@buserror.net> > > --- > > Changes for v4: > > - Added this patch > > Changes for v5: > > - Modified copyright info > > - Changed MODULE_LICENSE to GPL > > - Changed EXPORT_SYMBOL_GPL to EXPORT_SYMBOL > > - Made FSL_GUTS user-invisible > > - Added a complete compatible list for GUTS > > - Stored guts info in file-scope variable > > - Added mfspr() getting SVR > > - Redefined GUTS APIs > > - Called fsl_guts_init rather than using platform driver > > - Removed useless parentheses > > - Removed useless 'extern' key words > > Changes for v6: > > - Made guts thread safe in fsl_guts_init > > Changes for v7: > > - Removed 'ifdef' for function declaration in guts.h > > Changes for v8: > > - Fixes lines longer than 80 characters checkpatch issue > > - Added 'Acked-by: Scott Wood' > > Changes for v9: > > - None > > Changes for v10: > > - None > > --- > > drivers/soc/Kconfig | 2 +- > > drivers/soc/fsl/Kconfig | 8 +++ > > drivers/soc/fsl/Makefile | 1 + > > drivers/soc/fsl/guts.c | 119 > > ++++++++++++++++++++++++++++++++++++++++++++ > > include/linux/fsl/guts.h | 126 +++++++++++++++++++++++++++++------------- > > ----- > > 5 files changed, 207 insertions(+), 49 deletions(-) > > create mode 100644 drivers/soc/fsl/Kconfig > > create mode 100644 drivers/soc/fsl/guts.c > > > > diff --git a/drivers/soc/Kconfig b/drivers/soc/Kconfig > > index cb58ef0..7106463 100644 > > --- a/drivers/soc/Kconfig > > +++ b/drivers/soc/Kconfig > > @@ -2,7 +2,7 @@ menu "SOC (System On Chip) specific Drivers" > > > > source "drivers/soc/bcm/Kconfig" > > source "drivers/soc/brcmstb/Kconfig" > > -source "drivers/soc/fsl/qe/Kconfig" > > +source "drivers/soc/fsl/Kconfig" > > source "drivers/soc/mediatek/Kconfig" > > source "drivers/soc/qcom/Kconfig" > > source "drivers/soc/rockchip/Kconfig" > > diff --git a/drivers/soc/fsl/Kconfig b/drivers/soc/fsl/Kconfig > > new file mode 100644 > > index 0000000..b313759 > > --- /dev/null > > +++ b/drivers/soc/fsl/Kconfig > > @@ -0,0 +1,8 @@ > > +# > > +# Freescale SOC drivers > > +# > > + > > +source "drivers/soc/fsl/qe/Kconfig" > > + > > +config FSL_GUTS > > + bool > > diff --git a/drivers/soc/fsl/Makefile b/drivers/soc/fsl/Makefile > > index 203307f..02afb7f 100644 > > --- a/drivers/soc/fsl/Makefile > > +++ b/drivers/soc/fsl/Makefile > > @@ -4,3 +4,4 @@ > > > > obj-$(CONFIG_QUICC_ENGINE) += qe/ > > obj-$(CONFIG_CPM) += qe/ > > +obj-$(CONFIG_FSL_GUTS) += guts.o > > diff --git a/drivers/soc/fsl/guts.c b/drivers/soc/fsl/guts.c > > new file mode 100644 > > index 0000000..fa155e6 > > --- /dev/null > > +++ b/drivers/soc/fsl/guts.c > > @@ -0,0 +1,119 @@ > > +/* > > + * Freescale QorIQ Platforms GUTS Driver > > + * > > + * Copyright (C) 2016 Freescale Semiconductor, Inc. > > + * > > + * This program is free software; you can redistribute it and/or modify > > + * it under the terms of the GNU General Public License as published by > > + * the Free Software Foundation; either version 2 of the License, or > > + * (at your option) any later version. > > + */ > > + > > +#include <linux/io.h> > > +#include <linux/module.h> > Seems there was lots of discussion on this. If it does end up being > resent, it would be nice to get the module.h and other modular stuff > gone since it is a bool Kconfig. I plan to resend just the GUTS driver portion and send it through the PPC tree. I don't see any modular stuff in there besides the linux/module.h include. -Scott -- To unsubscribe from this list: send the line "unsubscribe linux-clk" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
[Re: [v10, 3/7] soc: fsl: add GUTS driver for QorIQ platforms] On 15/07/2016 (Fri 14:12) Scott Wood wrote: > On Fri, 2016-07-15 at 12:43 -0400, Paul Gortmaker wrote: > > > +source "drivers/soc/fsl/qe/Kconfig" [...] > > > + > > > +config FSL_GUTS > > > + bool > > > diff --git a/drivers/soc/fsl/Makefile b/drivers/soc/fsl/Makefile > > > index 203307f..02afb7f 100644 > > > --- a/drivers/soc/fsl/Makefile > > > +++ b/drivers/soc/fsl/Makefile > > > @@ -4,3 +4,4 @@ > > > > > > obj-$(CONFIG_QUICC_ENGINE) += qe/ > > > obj-$(CONFIG_CPM) += qe/ > > > +obj-$(CONFIG_FSL_GUTS) += guts.o > > > diff --git a/drivers/soc/fsl/guts.c b/drivers/soc/fsl/guts.c > > > new file mode 100644 > > > index 0000000..fa155e6 > > > --- /dev/null > > > +++ b/drivers/soc/fsl/guts.c > > > @@ -0,0 +1,119 @@ > > > +/* > > > + * Freescale QorIQ Platforms GUTS Driver > > > + * > > > + * Copyright (C) 2016 Freescale Semiconductor, Inc. > > > + * > > > + * This program is free software; you can redistribute it and/or modify > > > + * it under the terms of the GNU General Public License as published by > > > + * the Free Software Foundation; either version 2 of the License, or > > > + * (at your option) any later version. > > > + */ > > > + > > > +#include <linux/io.h> > > > +#include <linux/module.h> > > Seems there was lots of discussion on this. If it does end up being > > resent, it would be nice to get the module.h and other modular stuff > > gone since it is a bool Kconfig. > > I plan to resend just the GUTS driver portion and send it through the PPC > tree. > > I don't see any modular stuff in there besides the linux/module.h include. Great. Normally I'm seeing the MODULE_DEVICE_TABLE and MODULE_AUTHOR and MODULE_LICENSE etc, so it has (unfortunately) become a knee jerk reaction to assume the latter follows a module.h presence... thanks for removing the extraneous include. Paul. -- > > -Scott > > -- To unsubscribe from this list: send the line "unsubscribe linux-clk" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/soc/Kconfig b/drivers/soc/Kconfig index cb58ef0..7106463 100644 --- a/drivers/soc/Kconfig +++ b/drivers/soc/Kconfig @@ -2,7 +2,7 @@ menu "SOC (System On Chip) specific Drivers" source "drivers/soc/bcm/Kconfig" source "drivers/soc/brcmstb/Kconfig" -source "drivers/soc/fsl/qe/Kconfig" +source "drivers/soc/fsl/Kconfig" source "drivers/soc/mediatek/Kconfig" source "drivers/soc/qcom/Kconfig" source "drivers/soc/rockchip/Kconfig" diff --git a/drivers/soc/fsl/Kconfig b/drivers/soc/fsl/Kconfig new file mode 100644 index 0000000..b313759 --- /dev/null +++ b/drivers/soc/fsl/Kconfig @@ -0,0 +1,8 @@ +# +# Freescale SOC drivers +# + +source "drivers/soc/fsl/qe/Kconfig" + +config FSL_GUTS + bool diff --git a/drivers/soc/fsl/Makefile b/drivers/soc/fsl/Makefile index 203307f..02afb7f 100644 --- a/drivers/soc/fsl/Makefile +++ b/drivers/soc/fsl/Makefile @@ -4,3 +4,4 @@ obj-$(CONFIG_QUICC_ENGINE) += qe/ obj-$(CONFIG_CPM) += qe/ +obj-$(CONFIG_FSL_GUTS) += guts.o diff --git a/drivers/soc/fsl/guts.c b/drivers/soc/fsl/guts.c new file mode 100644 index 0000000..fa155e6 --- /dev/null +++ b/drivers/soc/fsl/guts.c @@ -0,0 +1,119 @@ +/* + * Freescale QorIQ Platforms GUTS Driver + * + * Copyright (C) 2016 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/io.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/mutex.h> +#include <linux/of_address.h> +#include <linux/of_platform.h> +#include <linux/fsl/guts.h> + +struct guts { + struct ccsr_guts __iomem *regs; + bool little_endian; +}; + +static struct guts *guts; +static DEFINE_MUTEX(guts_lock); + +u32 fsl_guts_get_svr(void) +{ + u32 svr = 0; + + if (!guts || !guts->regs) { +#ifdef CONFIG_PPC + svr = mfspr(SPRN_SVR); +#endif + return svr; + } + + if (guts->little_endian) + svr = ioread32(&guts->regs->svr); + else + svr = ioread32be(&guts->regs->svr); + + return svr; +} +EXPORT_SYMBOL(fsl_guts_get_svr); + +/* + * Table for matching compatible strings, for device tree + * guts node, for Freescale QorIQ SOCs. + */ +static const struct of_device_id guts_of_match[] = { + /* For T4 & B4 Series SOCs */ + { .compatible = "fsl,qoriq-device-config-1.0", }, + /* For P Series SOCs */ + { .compatible = "fsl,qoriq-device-config-2.0", }, + { .compatible = "fsl,p1010-guts", }, + { .compatible = "fsl,p1020-guts", }, + { .compatible = "fsl,p1021-guts", }, + { .compatible = "fsl,p1022-guts", }, + { .compatible = "fsl,p1023-guts", }, + { .compatible = "fsl,p2020-guts", }, + /* For BSC Series SOCs */ + { .compatible = "fsl,bsc9131-guts", }, + { .compatible = "fsl,bsc9132-guts", }, + /* For MPC85xx Series SOCs */ + { .compatible = "fsl,mpc8536-guts", }, + { .compatible = "fsl,mpc8544-guts", }, + { .compatible = "fsl,mpc8548-guts", }, + { .compatible = "fsl,mpc8568-guts", }, + { .compatible = "fsl,mpc8569-guts", }, + { .compatible = "fsl,mpc8572-guts", }, + /* For Layerscape Series SOCs */ + { .compatible = "fsl,ls1021a-dcfg", }, + { .compatible = "fsl,ls1043a-dcfg", }, + { .compatible = "fsl,ls2080a-dcfg", }, + {} +}; + +int fsl_guts_init(void) +{ + struct device_node *np; + int ret; + + mutex_lock(&guts_lock); + /* Initialize guts only once */ + if (guts) { + ret = guts->regs ? 0 : -ENOMEM; + goto out; + } + + np = of_find_matching_node(NULL, guts_of_match); + if (!np) { + ret = -ENODEV; + goto out; + } + + guts = kzalloc(sizeof(*guts), GFP_KERNEL); + if (!guts) { + ret = -ENOMEM; + goto out; + } + + guts->little_endian = of_property_read_bool(np, "little-endian"); + + guts->regs = of_iomap(np, 0); + if (!guts->regs) { + ret = -ENOMEM; + kfree(guts); + goto out; + } + + of_node_put(np); + ret = 0; +out: + mutex_unlock(&guts_lock); + return ret; +} +EXPORT_SYMBOL(fsl_guts_init); diff --git a/include/linux/fsl/guts.h b/include/linux/fsl/guts.h index 649e917..7e1e22b 100644 --- a/include/linux/fsl/guts.h +++ b/include/linux/fsl/guts.h @@ -29,83 +29,113 @@ * #ifdefs. */ struct ccsr_guts { - __be32 porpllsr; /* 0x.0000 - POR PLL Ratio Status Register */ - __be32 porbmsr; /* 0x.0004 - POR Boot Mode Status Register */ - __be32 porimpscr; /* 0x.0008 - POR I/O Impedance Status and Control Register */ - __be32 pordevsr; /* 0x.000c - POR I/O Device Status Register */ - __be32 pordbgmsr; /* 0x.0010 - POR Debug Mode Status Register */ - __be32 pordevsr2; /* 0x.0014 - POR device status register 2 */ + u32 porpllsr; /* 0x.0000 - POR PLL Ratio Status Register */ + u32 porbmsr; /* 0x.0004 - POR Boot Mode Status Register */ + u32 porimpscr; /* 0x.0008 - POR I/O Impedance Status and + * Control Register + */ + u32 pordevsr; /* 0x.000c - POR I/O Device Status Register */ + u32 pordbgmsr; /* 0x.0010 - POR Debug Mode Status Register */ + u32 pordevsr2; /* 0x.0014 - POR device status register 2 */ u8 res018[0x20 - 0x18]; - __be32 porcir; /* 0x.0020 - POR Configuration Information Register */ + u32 porcir; /* 0x.0020 - POR Configuration Information + * Register + */ u8 res024[0x30 - 0x24]; - __be32 gpiocr; /* 0x.0030 - GPIO Control Register */ + u32 gpiocr; /* 0x.0030 - GPIO Control Register */ u8 res034[0x40 - 0x34]; - __be32 gpoutdr; /* 0x.0040 - General-Purpose Output Data Register */ + u32 gpoutdr; /* 0x.0040 - General-Purpose Output Data + * Register + */ u8 res044[0x50 - 0x44]; - __be32 gpindr; /* 0x.0050 - General-Purpose Input Data Register */ + u32 gpindr; /* 0x.0050 - General-Purpose Input Data + * Register + */ u8 res054[0x60 - 0x54]; - __be32 pmuxcr; /* 0x.0060 - Alternate Function Signal Multiplex Control */ - __be32 pmuxcr2; /* 0x.0064 - Alternate function signal multiplex control 2 */ - __be32 dmuxcr; /* 0x.0068 - DMA Mux Control Register */ + u32 pmuxcr; /* 0x.0060 - Alternate Function Signal + * Multiplex Control + */ + u32 pmuxcr2; /* 0x.0064 - Alternate function signal + * multiplex control 2 + */ + u32 dmuxcr; /* 0x.0068 - DMA Mux Control Register */ u8 res06c[0x70 - 0x6c]; - __be32 devdisr; /* 0x.0070 - Device Disable Control */ + u32 devdisr; /* 0x.0070 - Device Disable Control */ #define CCSR_GUTS_DEVDISR_TB1 0x00001000 #define CCSR_GUTS_DEVDISR_TB0 0x00004000 - __be32 devdisr2; /* 0x.0074 - Device Disable Control 2 */ + u32 devdisr2; /* 0x.0074 - Device Disable Control 2 */ u8 res078[0x7c - 0x78]; - __be32 pmjcr; /* 0x.007c - 4 Power Management Jog Control Register */ - __be32 powmgtcsr; /* 0x.0080 - Power Management Status and Control Register */ - __be32 pmrccr; /* 0x.0084 - Power Management Reset Counter Configuration Register */ - __be32 pmpdccr; /* 0x.0088 - Power Management Power Down Counter Configuration Register */ - __be32 pmcdr; /* 0x.008c - 4Power management clock disable register */ - __be32 mcpsumr; /* 0x.0090 - Machine Check Summary Register */ - __be32 rstrscr; /* 0x.0094 - Reset Request Status and Control Register */ - __be32 ectrstcr; /* 0x.0098 - Exception reset control register */ - __be32 autorstsr; /* 0x.009c - Automatic reset status register */ - __be32 pvr; /* 0x.00a0 - Processor Version Register */ - __be32 svr; /* 0x.00a4 - System Version Register */ + u32 pmjcr; /* 0x.007c - 4 Power Management Jog Control + * Register + */ + u32 powmgtcsr; /* 0x.0080 - Power Management Status and + * Control Register + */ + u32 pmrccr; /* 0x.0084 - Power Management Reset Counter + * Configuration Register + */ + u32 pmpdccr; /* 0x.0088 - Power Management Power Down Counter + * Configuration Register + */ + u32 pmcdr; /* 0x.008c - 4Power management clock disable + * register + */ + u32 mcpsumr; /* 0x.0090 - Machine Check Summary Register */ + u32 rstrscr; /* 0x.0094 - Reset Request Status and + * Control Register + */ + u32 ectrstcr; /* 0x.0098 - Exception reset control register */ + u32 autorstsr; /* 0x.009c - Automatic reset status register */ + u32 pvr; /* 0x.00a0 - Processor Version Register */ + u32 svr; /* 0x.00a4 - System Version Register */ u8 res0a8[0xb0 - 0xa8]; - __be32 rstcr; /* 0x.00b0 - Reset Control Register */ + u32 rstcr; /* 0x.00b0 - Reset Control Register */ u8 res0b4[0xc0 - 0xb4]; - __be32 iovselsr; /* 0x.00c0 - I/O voltage select status register + u32 iovselsr; /* 0x.00c0 - I/O voltage select status register Called 'elbcvselcr' on 86xx SOCs */ u8 res0c4[0x100 - 0xc4]; - __be32 rcwsr[16]; /* 0x.0100 - Reset Control Word Status registers + u32 rcwsr[16]; /* 0x.0100 - Reset Control Word Status registers There are 16 registers */ u8 res140[0x224 - 0x140]; - __be32 iodelay1; /* 0x.0224 - IO delay control register 1 */ - __be32 iodelay2; /* 0x.0228 - IO delay control register 2 */ + u32 iodelay1; /* 0x.0224 - IO delay control register 1 */ + u32 iodelay2; /* 0x.0228 - IO delay control register 2 */ u8 res22c[0x604 - 0x22c]; - __be32 pamubypenr; /* 0x.604 - PAMU bypass enable register */ + u32 pamubypenr; /* 0x.604 - PAMU bypass enable register */ u8 res608[0x800 - 0x608]; - __be32 clkdvdr; /* 0x.0800 - Clock Divide Register */ + u32 clkdvdr; /* 0x.0800 - Clock Divide Register */ u8 res804[0x900 - 0x804]; - __be32 ircr; /* 0x.0900 - Infrared Control Register */ + u32 ircr; /* 0x.0900 - Infrared Control Register */ u8 res904[0x908 - 0x904]; - __be32 dmacr; /* 0x.0908 - DMA Control Register */ + u32 dmacr; /* 0x.0908 - DMA Control Register */ u8 res90c[0x914 - 0x90c]; - __be32 elbccr; /* 0x.0914 - eLBC Control Register */ + u32 elbccr; /* 0x.0914 - eLBC Control Register */ u8 res918[0xb20 - 0x918]; - __be32 ddr1clkdr; /* 0x.0b20 - DDR1 Clock Disable Register */ - __be32 ddr2clkdr; /* 0x.0b24 - DDR2 Clock Disable Register */ - __be32 ddrclkdr; /* 0x.0b28 - DDR Clock Disable Register */ + u32 ddr1clkdr; /* 0x.0b20 - DDR1 Clock Disable Register */ + u32 ddr2clkdr; /* 0x.0b24 - DDR2 Clock Disable Register */ + u32 ddrclkdr; /* 0x.0b28 - DDR Clock Disable Register */ u8 resb2c[0xe00 - 0xb2c]; - __be32 clkocr; /* 0x.0e00 - Clock Out Select Register */ + u32 clkocr; /* 0x.0e00 - Clock Out Select Register */ u8 rese04[0xe10 - 0xe04]; - __be32 ddrdllcr; /* 0x.0e10 - DDR DLL Control Register */ + u32 ddrdllcr; /* 0x.0e10 - DDR DLL Control Register */ u8 rese14[0xe20 - 0xe14]; - __be32 lbcdllcr; /* 0x.0e20 - LBC DLL Control Register */ - __be32 cpfor; /* 0x.0e24 - L2 charge pump fuse override register */ + u32 lbcdllcr; /* 0x.0e20 - LBC DLL Control Register */ + u32 cpfor; /* 0x.0e24 - L2 charge pump fuse override + * register + */ u8 rese28[0xf04 - 0xe28]; - __be32 srds1cr0; /* 0x.0f04 - SerDes1 Control Register 0 */ - __be32 srds1cr1; /* 0x.0f08 - SerDes1 Control Register 0 */ + u32 srds1cr0; /* 0x.0f04 - SerDes1 Control Register 0 */ + u32 srds1cr1; /* 0x.0f08 - SerDes1 Control Register 0 */ u8 resf0c[0xf2c - 0xf0c]; - __be32 itcr; /* 0x.0f2c - Internal transaction control register */ + u32 itcr; /* 0x.0f2c - Internal transaction control + * register + */ u8 resf30[0xf40 - 0xf30]; - __be32 srds2cr0; /* 0x.0f40 - SerDes2 Control Register 0 */ - __be32 srds2cr1; /* 0x.0f44 - SerDes2 Control Register 0 */ + u32 srds2cr0; /* 0x.0f40 - SerDes2 Control Register 0 */ + u32 srds2cr1; /* 0x.0f44 - SerDes2 Control Register 0 */ } __attribute__ ((packed)); +u32 fsl_guts_get_svr(void); +int fsl_guts_init(void); /* Alternate function signal multiplex control */ #define MPC85xx_PMUXCR_QE(x) (0x8000 >> (x))