diff mbox

[v3,2/7] clk: rockchip: rk3399: export 480M_SRC clock id for usbphy0/usbphy1

Message ID 1470122401-31934-3-git-send-email-zhengxing@rock-chips.com (mailing list archive)
State Not Applicable, archived
Headers show

Commit Message

zhengxing Aug. 2, 2016, 7:19 a.m. UTC
Export these source clocks for usbphy.

Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>

---

Changes in v3: None
Changes in v2: None

 drivers/clk/rockchip/clk-rk3399.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

Comments

Heiko Stübner Aug. 4, 2016, 7:10 p.m. UTC | #1
Hi Xing,

Am Dienstag, 2. August 2016, 15:19:56 schrieb Xing Zheng:
> Export these source clocks for usbphy.
> 
> Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>

can you please provide a rationale why you need manual control over that 
intermediate clock?

The two usbphys seem to use the  clk_usb2phyX_ref clocks, generate the 480m 
clocks, but do not seem to need the clk_usbphyX_480m_src gates.

The clk_usbphyX_480m_src clocks on the other hand only lead to the 
clk_usbphy_480m mux, so I'd like some explanation on what you want to achieve 
here :-)


Thanks
Heiko
--
To unsubscribe from this list: send the line "unsubscribe linux-clk" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Frank Wang Aug. 5, 2016, 8:34 a.m. UTC | #2
Hi Heiko,

On 2016/8/5 3:10, Heiko Stübner wrote:
> Hi Xing,
>
> Am Dienstag, 2. August 2016, 15:19:56 schrieb Xing Zheng:
>> Export these source clocks for usbphy.
>>
>> Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
> can you please provide a rationale why you need manual control over that
> intermediate clock?

Well, From below graph, you can see that 'clk_usbphyX_480m' is generated 
from usb2phy, and 'clk_usbphy_480m' which select from 
clk_usbphyX_480m_src via a gate (G13[12])  provided 480M clock to other 
modules.

   xin24m
       |__ clk_usb2phy0_ref
       |                 |__ clk_usbphy0_480m
       |                                   |__clk_usbphy0_480m_src
       | |__clk_usbphy_480m
       |         |__ ... ...
       |__ clk_usb2phy1_ref
                          |__ clk_usbphy1_480m
                                          |__clk_usbphy1_480m_src

> The two usbphys seem to use the  clk_usb2phyX_ref clocks, generate the 480m
> clocks, but do not seem to need the clk_usbphyX_480m_src gates.

Yeah, they used to be. However, the story went something like this,

Some PM suspend process related ehci/ohci controller are base on 480m 
clocks, unfortunately, usb2-phy suspended earlier than ehci/ohci 
(usb2-phy will be auto suspended if no devices plug-in), and the 
clk-480m provided by it was disabled if no module used. As a result, the 
PM suspend process was blocked when it run into ehci/ohci module.

Hence, we are planing to refer clk_usbphyX_480m_src into each ehci/ohci 
driver. Maybe you will challenge why not refer clk_usbphy_480m directly? 
because there are two ehci/ohci connected in the different usb2phy, and 
only one clk_usbphy_480m clock was selected in clock tree.

BR.
Frank

> The clk_usbphyX_480m_src clocks on the other hand only lead to the
> clk_usbphy_480m mux, so I'd like some explanation on what you want to achieve
> here :-)
>
>
> Thanks
> Heiko
>

--
To unsubscribe from this list: send the line "unsubscribe linux-clk" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Heiko Stübner Aug. 5, 2016, 4:05 p.m. UTC | #3
Hi Frank,

Am Freitag, 5. August 2016, 16:34:42 schrieb Frank Wang:
> On 2016/8/5 3:10, Heiko Stübner wrote:
> > Am Dienstag, 2. August 2016, 15:19:56 schrieb Xing Zheng:
> >> Export these source clocks for usbphy.
> >> 
> >> Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
> > 
> > can you please provide a rationale why you need manual control over that
> > intermediate clock?
> 
> Well, From below graph, you can see that 'clk_usbphyX_480m' is generated
> from usb2phy, and 'clk_usbphy_480m' which select from
> clk_usbphyX_480m_src via a gate (G13[12])  provided 480M clock to other
> modules.
> 
>    xin24m
> 
>        |__ clk_usb2phy0_ref
>        |
>        |                 |__ clk_usbphy0_480m
>        |                 |
>        |                                   |__clk_usbphy0_480m_src
>        | |
>        | |__clk_usbphy_480m
>        | |
>        |         |__ ... ...
>        |
>        |__ clk_usb2phy1_ref
>        |
>                           |__ clk_usbphy1_480m
>                           |
>                                           |__clk_usbphy1_480m_src
> > 
> > The two usbphys seem to use the  clk_usb2phyX_ref clocks, generate the
> > 480m
> > clocks, but do not seem to need the clk_usbphyX_480m_src gates.
> 
> Yeah, they used to be. However, the story went something like this,
> 
> Some PM suspend process related ehci/ohci controller are base on 480m
> clocks, unfortunately, usb2-phy suspended earlier than ehci/ohci
> (usb2-phy will be auto suspended if no devices plug-in), and the
> clk-480m provided by it was disabled if no module used. As a result, the
> PM suspend process was blocked when it run into ehci/ohci module.

ah, so the ehci controller needs that 480m clock as well? Do you happen to 
have example patches for the ehci/ohci side already? I'd like to peak at what 
you mean with "some PM suspend process related" things.

Depending on what is actually needed, you could also pull the usbphy out of 
autosuspend in a pm-prepare callback of the phy driver itself ... see 
http://lxr.free-electrons.com/source/include/linux/pm.h#L86

Like 
- in the .prepare callback make sure to unsuspend the phy
  and deactivate the autosuspend
- ehci/ohci will poweroff the phy in it s suspend callback (already does that)
- suspend -> resume
- ehci/ohci will poweron the phy
- in the phy's .complete callback you can reactivate the autosuspend timer

Because it looks more like you actually need the phy and not the clock alone.
So it would be nicer to use mechanisms already in place instead of creating 
new dependencies.


> Hence, we are planing to refer clk_usbphyX_480m_src into each ehci/ohci
> driver. Maybe you will challenge why not refer clk_usbphy_480m directly?
> because there are two ehci/ohci connected in the different usb2phy, and
> only one clk_usbphy_480m clock was selected in clock tree.

Nope, no argument from me as I fully understand that each phy provides its own 
480m clock :-) .


Heiko
--
To unsubscribe from this list: send the line "unsubscribe linux-clk" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Frank Wang Aug. 8, 2016, 9:55 a.m. UTC | #4
Hi Heiko,

On 2016/8/6 0:05, Heiko Stübner wrote:
> Hi Frank,
>
> Am Freitag, 5. August 2016, 16:34:42 schrieb Frank Wang:
>> On 2016/8/5 3:10, Heiko Stübner wrote:
>>> Am Dienstag, 2. August 2016, 15:19:56 schrieb Xing Zheng:
>>>> Export these source clocks for usbphy.
>>>>
>>>> Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
>>> can you please provide a rationale why you need manual control over that
>>> intermediate clock?
>> Well, From below graph, you can see that 'clk_usbphyX_480m' is generated
>> from usb2phy, and 'clk_usbphy_480m' which select from
>> clk_usbphyX_480m_src via a gate (G13[12])  provided 480M clock to other
>> modules.
>>
>>     xin24m
>>       |__ clk_usb2phy0_ref
>>       |     |
>>       |     |__ clk_usbphy0_480m
>>       |           |
>>       |           |__clk_usbphy0_480m_src
>>       |                |
>>       |                |__clk_usbphy_480m
>>       |                     |__ ... ...
>>       |
>>       |__ clk_usb2phy1_ref
>>             |
>>             |__ clk_usbphy1_480m
>>                   |
>>                   |__clk_usbphy1_480m_src
>>> The two usbphys seem to use the  clk_usb2phyX_ref clocks, generate the
>>> 480m
>>> clocks, but do not seem to need the clk_usbphyX_480m_src gates.
>> Yeah, they used to be. However, the story went something like this,
>>
>> Some PM suspend process related ehci/ohci controller are base on 480m
>> clocks, unfortunately, usb2-phy suspended earlier than ehci/ohci
>> (usb2-phy will be auto suspended if no devices plug-in), and the
>> clk-480m provided by it was disabled if no module used. As a result, the
>> PM suspend process was blocked when it run into ehci/ohci module.
> ah, so the ehci controller needs that 480m clock as well? Do you happen to
> have example patches for the ehci/ohci side already? I'd like to peak at what
> you mean with "some PM suspend process related" things.

Actually, no patches for it, I just make below steps manually :-).
1. set two usb2-phy into suspend mode.
2. disable 480m clock on each usb2-phy (assume only usb2-phy used it).
3. press power button let system into PM suspend.

Then, the kernel will be blocked and you can see the following log from 
console.
... ....
[  123.763848] calling  usb6+ @ 166, parent: xhci-hcd.0.auto
[  123.764503] call usb6+ returned 0 after 163 usecs
[  123.765106] calling  usb5+ @ 166, parent: xhci-hcd.0.auto
[  123.765719] call usb5+ returned 0 after 121 usecs
[  123.766294] calling  usb4+ @ 166, parent: fe3e0000.usb
[  123.766917] calling  usb3+ @ 55, parent: fe3a0000.usb

>
> Depending on what is actually needed, you could also pull the usbphy out of
> autosuspend in a pm-prepare callback of the phy driver itself ... see
> http://lxr.free-electrons.com/source/include/linux/pm.h#L86
>
> Like
> - in the .prepare callback make sure to unsuspend the phy
>    and deactivate the autosuspend
> - ehci/ohci will poweroff the phy in it s suspend callback (already does that)

Hmm, do you remember that we have previously discussed there are some 
oddities in ehci/ohci driver? phy_power_on() gets called twice at 
ehci/ohci driver probe time, one is at pdata->power_on(); another is at 
usb_add_hcd(), then the power_count of phy increases to 2,  but 
phy_power_off() is just invoked one time when ehci/ohci goes to PM 
suspend, so phy->ops->power_off is never be invoked.

In this way,  the usb-phy maybe never go to suspend.

> - suspend -> resume
> - ehci/ohci will poweron the phy
> - in the phy's .complete callback you can reactivate the autosuspend timer
>
> Because it looks more like you actually need the phy and not the clock alone.
> So it would be nicer to use mechanisms already in place instead of creating
> new dependencies.
>

Theoretically, phy_init() will be invoked when ehci/ohci power on, and 
the sm_work will be reactivated (have already implemented) in 
phy->ops->init, but unfortunately, the same issue as phy_power_on() 
mentioned above, it never run there too .

>> Hence, we are planing to refer clk_usbphyX_480m_src into each ehci/ohci
>> driver. Maybe you will challenge why not refer clk_usbphy_480m directly?
>> because there are two ehci/ohci connected in the different usb2phy, and
>> only one clk_usbphy_480m clock was selected in clock tree.
> Nope, no argument from me as I fully understand that each phy provides its own
> 480m clock :-) .
>
>
> Heiko
>
>

--
To unsubscribe from this list: send the line "unsubscribe linux-clk" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Frank Wang Aug. 16, 2016, 6:34 a.m. UTC | #5
Hi Heiko,

On 2016/8/8 17:55, Frank Wang wrote:
> Hi Heiko,
>
> On 2016/8/6 0:05, Heiko Stübner wrote:
>> Hi Frank,
>>
>> Am Freitag, 5. August 2016, 16:34:42 schrieb Frank Wang:
>>> On 2016/8/5 3:10, Heiko Stübner wrote:
>>>> Am Dienstag, 2. August 2016, 15:19:56 schrieb Xing Zheng:
>>>>> Export these source clocks for usbphy.
>>>>>
>>>>> Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
>>>> can you please provide a rationale why you need manual control over 
>>>> that
>>>> intermediate clock?
>>> Well, From below graph, you can see that 'clk_usbphyX_480m' is 
>>> generated
>>> from usb2phy, and 'clk_usbphy_480m' which select from
>>> clk_usbphyX_480m_src via a gate (G13[12])  provided 480M clock to other
>>> modules.
>>>
>>>     xin24m
>>>       |__ clk_usb2phy0_ref
>>>       |     |
>>>       |     |__ clk_usbphy0_480m
>>>       |           |
>>>       |           |__clk_usbphy0_480m_src
>>>       |                |
>>>       |                |__clk_usbphy_480m
>>>       |                     |__ ... ...
>>>       |
>>>       |__ clk_usb2phy1_ref
>>>             |
>>>             |__ clk_usbphy1_480m
>>>                   |
>>>                   |__clk_usbphy1_480m_src
>>>> The two usbphys seem to use the clk_usb2phyX_ref clocks, generate the
>>>> 480m
>>>> clocks, but do not seem to need the clk_usbphyX_480m_src gates.
>>> Yeah, they used to be. However, the story went something like this,
>>>
>>> Some PM suspend process related ehci/ohci controller are base on 480m
>>> clocks, unfortunately, usb2-phy suspended earlier than ehci/ohci
>>> (usb2-phy will be auto suspended if no devices plug-in), and the
>>> clk-480m provided by it was disabled if no module used. As a result, 
>>> the
>>> PM suspend process was blocked when it run into ehci/ohci module.
>> ah, so the ehci controller needs that 480m clock as well? Do you 
>> happen to
>> have example patches for the ehci/ohci side already? I'd like to peak 
>> at what
>> you mean with "some PM suspend process related" things.
>
> Actually, no patches for it, I just make below steps manually :-).
> 1. set two usb2-phy into suspend mode.
> 2. disable 480m clock on each usb2-phy (assume only usb2-phy used it).
> 3. press power button let system into PM suspend.
>
> Then, the kernel will be blocked and you can see the following log 
> from console.
> ... ....
> [  123.763848] calling  usb6+ @ 166, parent: xhci-hcd.0.auto
> [  123.764503] call usb6+ returned 0 after 163 usecs
> [  123.765106] calling  usb5+ @ 166, parent: xhci-hcd.0.auto
> [  123.765719] call usb5+ returned 0 after 121 usecs
> [  123.766294] calling  usb4+ @ 166, parent: fe3e0000.usb
> [  123.766917] calling  usb3+ @ 55, parent: fe3a0000.usb
>

May I know have you tried reproducing on your board or not?

>>
>> Depending on what is actually needed, you could also pull the usbphy 
>> out of
>> autosuspend in a pm-prepare callback of the phy driver itself ... see
>> http://lxr.free-electrons.com/source/include/linux/pm.h#L86
>>
>> Like
>> - in the .prepare callback make sure to unsuspend the phy
>>    and deactivate the autosuspend
>> - ehci/ohci will poweroff the phy in it s suspend callback (already 
>> does that)
>
> Hmm, do you remember that we have previously discussed there are some 
> oddities in ehci/ohci driver? phy_power_on() gets called twice at 
> ehci/ohci driver probe time, one is at pdata->power_on(); another is 
> at usb_add_hcd(), then the power_count of phy increases to 2,  but 
> phy_power_off() is just invoked one time when ehci/ohci goes to PM 
> suspend, so phy->ops->power_off is never be invoked.
>
> In this way,  the usb-phy maybe never go to suspend.
>
>> - suspend -> resume
>> - ehci/ohci will poweron the phy
>> - in the phy's .complete callback you can reactivate the autosuspend 
>> timer
>>
>> Because it looks more like you actually need the phy and not the 
>> clock alone.
>> So it would be nicer to use mechanisms already in place instead of 
>> creating
>> new dependencies.
>>
>
> Theoretically, phy_init() will be invoked when ehci/ohci power on, and 
> the sm_work will be reactivated (have already implemented) in 
> phy->ops->init, but unfortunately, the same issue as phy_power_on() 
> mentioned above, it never run there too .
>

Would you like to give some comments on above two oddities please?

BR.
Frank

>>> Hence, we are planing to refer clk_usbphyX_480m_src into each ehci/ohci
>>> driver. Maybe you will challenge why not refer clk_usbphy_480m 
>>> directly?
>>> because there are two ehci/ohci connected in the different usb2phy, and
>>> only one clk_usbphy_480m clock was selected in clock tree.
>> Nope, no argument from me as I fully understand that each phy 
>> provides its own
>> 480m clock :-) .
>>
>>
>> Heiko
>>
>>

--
To unsubscribe from this list: send the line "unsubscribe linux-clk" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/clk/rockchip/clk-rk3399.c b/drivers/clk/rockchip/clk-rk3399.c
index 8059a8d..316f5f4 100644
--- a/drivers/clk/rockchip/clk-rk3399.c
+++ b/drivers/clk/rockchip/clk-rk3399.c
@@ -403,9 +403,9 @@  static struct rockchip_clk_branch rk3399_clk_branches[] __initdata = {
 	GATE(SCLK_USB2PHY1_REF, "clk_usb2phy1_ref", "xin24m", CLK_IGNORE_UNUSED,
 			RK3399_CLKGATE_CON(6), 6, GFLAGS),
 
-	GATE(0, "clk_usbphy0_480m_src", "clk_usbphy0_480m", CLK_IGNORE_UNUSED,
+	GATE(SCLK_USBPHY0_480M_SRC, "clk_usbphy0_480m_src", "clk_usbphy0_480m", CLK_IGNORE_UNUSED,
 			RK3399_CLKGATE_CON(13), 12, GFLAGS),
-	GATE(0, "clk_usbphy1_480m_src", "clk_usbphy1_480m", CLK_IGNORE_UNUSED,
+	GATE(SCLK_USBPHY1_480M_SRC, "clk_usbphy1_480m_src", "clk_usbphy1_480m", CLK_IGNORE_UNUSED,
 			RK3399_CLKGATE_CON(13), 12, GFLAGS),
 	MUX(0, "clk_usbphy_480m", mux_usbphy_480m_p, CLK_IGNORE_UNUSED,
 			RK3399_CLKSEL_CON(14), 6, 1, MFLAGS),