Message ID | 1477970526-26388-1-git-send-email-zhengxing@rock-chips.com (mailing list archive) |
---|---|
State | Not Applicable, archived |
Headers | show |
Am Dienstag, 1. November 2016, 11:22:06 CET schrieb Xing Zheng: > Usually, the 800MHz and 1GHz are supplied for CPLL and NPLL in the RK3399. > But dues to the carelessly copying from RK3036 when the RK3399 bringing up, > the refdiv == 6, it will increase the lock time, and it is not an optimal > configuration. > > Please let's fix them for the lock time and jitter are lower: > 800 MHz: > - FVCO == 2.4 GHz, revdiv == 1. > 1 GHz: > - FVCO == 3 GHz, revdiv == 1. > > Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> applied to my clk-branch for 4.10 Thanks Heiko -- To unsubscribe from this list: send the line "unsubscribe linux-clk" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/clk/rockchip/clk-rk3399.c b/drivers/clk/rockchip/clk-rk3399.c index a5a3f41..28aff45 100644 --- a/drivers/clk/rockchip/clk-rk3399.c +++ b/drivers/clk/rockchip/clk-rk3399.c @@ -77,7 +77,7 @@ static struct rockchip_pll_rate_table rk3399_pll_rates[] = { RK3036_PLL_RATE(1104000000, 1, 46, 1, 1, 1, 0), RK3036_PLL_RATE(1100000000, 12, 550, 1, 1, 1, 0), RK3036_PLL_RATE(1008000000, 1, 84, 2, 1, 1, 0), - RK3036_PLL_RATE(1000000000, 6, 500, 2, 1, 1, 0), + RK3036_PLL_RATE(1000000000, 1, 125, 3, 1, 1, 0), RK3036_PLL_RATE( 984000000, 1, 82, 2, 1, 1, 0), RK3036_PLL_RATE( 960000000, 1, 80, 2, 1, 1, 0), RK3036_PLL_RATE( 936000000, 1, 78, 2, 1, 1, 0), @@ -87,7 +87,7 @@ static struct rockchip_pll_rate_table rk3399_pll_rates[] = { RK3036_PLL_RATE( 864000000, 1, 72, 2, 1, 1, 0), RK3036_PLL_RATE( 840000000, 1, 70, 2, 1, 1, 0), RK3036_PLL_RATE( 816000000, 1, 68, 2, 1, 1, 0), - RK3036_PLL_RATE( 800000000, 6, 400, 2, 1, 1, 0), + RK3036_PLL_RATE( 800000000, 1, 100, 3, 1, 1, 0), RK3036_PLL_RATE( 700000000, 6, 350, 2, 1, 1, 0), RK3036_PLL_RATE( 696000000, 1, 58, 2, 1, 1, 0), RK3036_PLL_RATE( 676000000, 3, 169, 2, 1, 1, 0),
Usually, the 800MHz and 1GHz are supplied for CPLL and NPLL in the RK3399. But dues to the carelessly copying from RK3036 when the RK3399 bringing up, the refdiv == 6, it will increase the lock time, and it is not an optimal configuration. Please let's fix them for the lock time and jitter are lower: 800 MHz: - FVCO == 2.4 GHz, revdiv == 1. 1 GHz: - FVCO == 3 GHz, revdiv == 1. Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> --- drivers/clk/rockchip/clk-rk3399.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)