diff mbox

[4/6] ARM: dts: add basic support for Rockchip RK1108 SOC

Message ID 1478176848-12132-1-git-send-email-andy.yan@rock-chips.com (mailing list archive)
State Not Applicable
Headers show

Commit Message

Andy Yan Nov. 3, 2016, 12:40 p.m. UTC
RK1108 is embedded with an ARM Cortex-A7 single core and a DSP core.
It is designed for varies application scenario such as car DVR, sports
DV, secure camera and UAV camera.

This patch add basic support for it with DMAC / UART / CRU / pinctrl
enabled.

Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
---

 arch/arm/boot/dts/rk1108.dtsi     | 420 ++++++++++++++++++++++++++++++++++++++
 arch/arm/mach-rockchip/rockchip.c |   1 +
 2 files changed, 421 insertions(+)
 create mode 100644 arch/arm/boot/dts/rk1108.dtsi

Comments

Heiko Stuebner Nov. 4, 2016, 8 a.m. UTC | #1
Am Donnerstag, 3. November 2016, 20:40:48 CET schrieb Andy Yan:
> RK1108 is embedded with an ARM Cortex-A7 single core and a DSP core.
> It is designed for varies application scenario such as car DVR, sports
> DV, secure camera and UAV camera.
> 
> This patch add basic support for it with DMAC / UART / CRU / pinctrl
> enabled.
> 
> Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
> ---
> 
>  arch/arm/boot/dts/rk1108.dtsi     | 420
> ++++++++++++++++++++++++++++++++++++++ arch/arm/mach-rockchip/rockchip.c | 
>  1 +
>  2 files changed, 421 insertions(+)
>  create mode 100644 arch/arm/boot/dts/rk1108.dtsi
> 
> diff --git a/arch/arm/boot/dts/rk1108.dtsi b/arch/arm/boot/dts/rk1108.dtsi
> new file mode 100644
> index 0000000..9dccfea
> --- /dev/null
> +++ b/arch/arm/boot/dts/rk1108.dtsi
> @@ -0,0 +1,420 @@
> +/*
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPL or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + *  a) This file is free software; you can redistribute it and/or
> + *     modify it under the terms of the GNU General Public License as
> + *     published by the Free Software Foundation; either version 2 of the
> + *     License, or (at your option) any later version.
> + *
> + *     This file is distributed in the hope that it will be useful,
> + *     but WITHOUT ANY WARRANTY; without even the implied warranty of
> + *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + *     GNU General Public License for more details.
> + *
> + * Or, alternatively,
> + *
> + *  b) Permission is hereby granted, free of charge, to any person
> + *     obtaining a copy of this software and associated documentation
> + *     files (the "Software"), to deal in the Software without
> + *     restriction, including without limitation the rights to use,
> + *     copy, modify, merge, publish, distribute, sublicense, and/or
> + *     sell copies of the Software, and to permit persons to whom the
> + *     Software is furnished to do so, subject to the following
> + *     conditions:
> + *
> + *     The above copyright notice and this permission notice shall be
> + *     included in all copies or substantial portions of the Software.
> + *
> + *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> + *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> + *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + *     OTHER DEALINGS IN THE SOFTWARE.
> + */
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/clock/rk1108-cru.h>
> +#include <dt-bindings/pinctrl/rockchip.h>
> +/ {
> +	#address-cells = <1>;
> +	#size-cells = <1>;
> +
> +	compatible = "rockchip,rk1108";
> +
> +	interrupt-parent = <&gic>;
> +
> +	aliases {
> +		serial0 = &uart0;
> +		serial1 = &uart1;
> +		serial2 = &uart2;
> +	};
> +
> +	cpus {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		cpu0: cpu@f00 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a7";
> +			reg = <0xf00>;
> +		};
> +

unnecessary empty line

> +	};
> +
> +	amba {
> +		compatible = "simple-bus";
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		ranges;
> +
> +		pdma: pdma@102a0000 {
> +			compatible = "arm,pl330", "arm,primecell";
> +			reg = <0x102a0000 0x4000>;
> +			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
> +			#dma-cells = <1>;
> +			arm,pl330-broken-no-flushp;
> +			clocks = <&cru ACLK_DMAC>;
> +			clock-names = "apb_pclk";
> +		};
> +	};
> +
> +	arm-pmu {
> +		compatible = "arm,cortex-a7-pmu";
> +		interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
> +	};
> +
> +
> +	timer {
> +		compatible = "arm,armv7-timer";
> +		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | 
IRQ_TYPE_LEVEL_HIGH)>,
> +			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;

CPU_MASK_SIMPLE(4)? You only have one core, not 4.


> +		clock-frequency = <24000000>;
> +	};
> +
> +	xin24m: oscillator {
> +		compatible = "fixed-clock";
> +		clock-frequency = <24000000>;
> +		clock-output-names = "xin24m";
> +		#clock-cells = <0>;
> +	};
> +
> +	bus_intmem@10080000 {
> +		compatible = "mmio-sram";
> +		reg = <0x10080000 0x2000>;
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		ranges = <0 0x10080000 0x2000>;
> +	};
> +
> +	grf: syscon@10300000 {
> +		compatible = "rockchip,rk1108-grf", "syscon";
> +		reg = <0x10300000 0x1000>;
> +	};
> +
> +	emmc: dwmmc@30110000 {
> +		compatible = "rockchip,rk1108-dw-mshc", "rockchip,rk3288-dw-mshc";
> +		clock-freq-min-max = <400000 150000000>;
> +		clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
> +			 <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
> +		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
> +		fifo-depth = <0x100>;
> +		interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
> +		reg = <0x30110000 0x4000>;
> +		status = "disabled";
> +	};
> +
> +	sdio: dwmmc@30120000 {
> +		compatible = "rockchip,rk1108-dw-mshc", "rockchip,rk3288-dw-mshc";
> +		clock-freq-min-max = <400000 150000000>;
> +		clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>,
> +			 <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>;
> +		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
> +		fifo-depth = <0x100>;
> +		interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
> +		reg = <0x30120000 0x4000>;
> +		status = "disabled";
> +	};
> +
> +	sdmmc: dwmmc@30130000 {

ordering by register address please (uart2 before sdmmc etc; same for 
everything else)


> +		compatible = "rockchip,rk1108-dw-mshc", "rockchip,rk3288-dw-mshc";
> +		clock-freq-min-max = <400000 100000000>;
> +		clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>,
> +			 <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>;
> +		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
> +		fifo-depth = <0x100>;
> +		interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
> +		reg = <0x30130000 0x4000>;
> +		status = "disabled";
> +	};
> +
> +	uart2: serial@10210000 {
> +		compatible = "rockchip,rk1108-uart", "snps,dw-apb-uart";
> +		reg = <0x10210000 0x100>;
> +		interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
> +		reg-shift = <2>;
> +		reg-io-width = <4>;
> +		clock-frequency = <24000000>;
> +		clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
> +		clock-names = "baudclk", "apb_pclk";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&uart2m0_xfer>;
> +		status = "disabled";
> +	};
> +
> +	uart1: serial@10220000 {
> +		compatible = "rockchip,rk1108-uart", "snps,dw-apb-uart";
> +		reg = <0x10220000 0x100>;
> +		interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
> +		reg-shift = <2>;
> +		reg-io-width = <4>;
> +		clock-frequency = <24000000>;
> +		clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
> +		clock-names = "baudclk", "apb_pclk";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&uart1_xfer>;
> +		status = "disabled";
> +	};
> +
> +	uart0: serial@10230000 {
> +		compatible = "rockchip,rk1108-uart", "snps,dw-apb-uart";
> +		reg = <0x10230000 0x100>;
> +		interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
> +		reg-shift = <2>;
> +		reg-io-width = <4>;
> +		clock-frequency = <24000000>;
> +		clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
> +		clock-names = "baudclk", "apb_pclk";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
> +		status = "disabled";
> +	};
> +
> +	cru: clock-controller@20200000 {
> +		compatible = "rockchip,rk1108-cru";
> +		reg = <0x20200000 0x1000>;
> +		rockchip,grf = <&grf>;
> +		#clock-cells = <1>;
> +		#reset-cells = <1>;
> +	};
> +
> +	gic: interrupt-controller@32010000 {
> +		compatible = "arm,cortex-a15-gic";

compatible = "arm,gic-400"; ?

> +		interrupt-controller;
> +		#interrupt-cells = <3>;
> +		#address-cells = <0>;
> +
> +		reg = <0x32011000 0x1000>,
> +		      <0x32012000 0x1000>;

please provide all 4 register areas and also the interrupt (

> +	};
> +

[...]

> diff --git a/arch/arm/mach-rockchip/rockchip.c
> b/arch/arm/mach-rockchip/rockchip.c index a7ab9ec..e7fdf06 100644
> --- a/arch/arm/mach-rockchip/rockchip.c
> +++ b/arch/arm/mach-rockchip/rockchip.c
> @@ -76,6 +76,7 @@ static void __init rockchip_dt_init(void)
>  }
> 
>  static const char * const rockchip_board_dt_compat[] = {
> +	"rockchip,rk1108",
>  	"rockchip,rk2928",
>  	"rockchip,rk3066a",
>  	"rockchip,rk3066b",

please split this into a separate patch, as code and dts changes need to go 
through different branches.


Thanks
Heiko
--
To unsubscribe from this list: send the line "unsubscribe linux-clk" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Heiko Stuebner Nov. 4, 2016, 8:07 a.m. UTC | #2
Am Donnerstag, 3. November 2016, 20:40:48 CET schrieb Andy Yan:
> RK1108 is embedded with an ARM Cortex-A7 single core and a DSP core.
> It is designed for varies application scenario such as car DVR, sports
> DV, secure camera and UAV camera.
> 
> This patch add basic support for it with DMAC / UART / CRU / pinctrl
> enabled.
> 
> Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
> ---
> 
>  arch/arm/boot/dts/rk1108.dtsi     | 420
> ++++++++++++++++++++++++++++++++++++++ arch/arm/mach-rockchip/rockchip.c | 
>  1 +
>  2 files changed, 421 insertions(+)
>  create mode 100644 arch/arm/boot/dts/rk1108.dtsi
> 
> diff --git a/arch/arm/boot/dts/rk1108.dtsi b/arch/arm/boot/dts/rk1108.dtsi
> new file mode 100644
> index 0000000..9dccfea
> --- /dev/null
> +++ b/arch/arm/boot/dts/rk1108.dtsi

[...]

> +	pinctrl: pinctrl {
> +		compatible = "rockchip,rk1108-pinctrl";
> +		rockchip,grf = <&grf>;

missing rockchip,pmu phandle for gpio0 iomuxes and also syscon declaration for 
said pmugrf syscon in this file.


Heiko

--
To unsubscribe from this list: send the line "unsubscribe linux-clk" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Andy Yan Nov. 8, 2016, 12:31 p.m. UTC | #3
Hi Heiko:


On 2016年11月04日 16:00, Heiko Stuebner wrote:
> Am Donnerstag, 3. November 2016, 20:40:48 CET schrieb Andy Yan:
>> RK1108 is embedded with an ARM Cortex-A7 single core and a DSP core.
>> It is designed for varies application scenario such as car DVR, sports
>> DV, secure camera and UAV camera.
>>
>> This patch add basic support for it with DMAC / UART / CRU / pinctrl
>> enabled.
>>
>> Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
>> ---
>>
>>   arch/arm/boot/dts/rk1108.dtsi     | 420
>> ++++++++++++++++++++++++++++++++++++++ arch/arm/mach-rockchip/rockchip.c |
>>   1 +
>>   2 files changed, 421 insertions(+)
>>   create mode 100644 arch/arm/boot/dts/rk1108.dtsi
>>
>> diff --git a/arch/arm/boot/dts/rk1108.dtsi b/arch/arm/boot/dts/rk1108.dtsi
>> new file mode 100644
>> index 0000000..9dccfea
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/rk1108.dtsi
>> @@ -0,0 +1,420 @@
>> +/*
>> + * This file is dual-licensed: you can use it either under the terms
>> + * of the GPL or the X11 license, at your option. Note that this dual
>> + * licensing only applies to this file, and not this project as a
>> + * whole.
>> + *
>> + *  a) This file is free software; you can redistribute it and/or
>> + *     modify it under the terms of the GNU General Public License as
>> + *     published by the Free Software Foundation; either version 2 of the
>> + *     License, or (at your option) any later version.
>> + *
>> + *     This file is distributed in the hope that it will be useful,
>> + *     but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
>> + *     GNU General Public License for more details.
>> + *
>> + * Or, alternatively,
>> + *
>> + *  b) Permission is hereby granted, free of charge, to any person
>> + *     obtaining a copy of this software and associated documentation
>> + *     files (the "Software"), to deal in the Software without
>> + *     restriction, including without limitation the rights to use,
>> + *     copy, modify, merge, publish, distribute, sublicense, and/or
>> + *     sell copies of the Software, and to permit persons to whom the
>> + *     Software is furnished to do so, subject to the following
>> + *     conditions:
>> + *
>> + *     The above copyright notice and this permission notice shall be
>> + *     included in all copies or substantial portions of the Software.
>> + *
>> + *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
>> + *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
>> + *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
>> + *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
>> + *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
>> + *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
>> + *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
>> + *     OTHER DEALINGS IN THE SOFTWARE.
>> + */
>> +
>> +#include <dt-bindings/gpio/gpio.h>
>> +#include <dt-bindings/interrupt-controller/irq.h>
>> +#include <dt-bindings/interrupt-controller/arm-gic.h>
>> +#include <dt-bindings/clock/rk1108-cru.h>
>> +#include <dt-bindings/pinctrl/rockchip.h>
>> +/ {
>> +	#address-cells = <1>;
>> +	#size-cells = <1>;
>> +
>> +	compatible = "rockchip,rk1108";
>> +
>> +	interrupt-parent = <&gic>;
>> +
>> +	aliases {
>> +		serial0 = &uart0;
>> +		serial1 = &uart1;
>> +		serial2 = &uart2;
>> +	};
>> +
>> +	cpus {
>> +		#address-cells = <1>;
>> +		#size-cells = <0>;
>> +
>> +		cpu0: cpu@f00 {
>> +			device_type = "cpu";
>> +			compatible = "arm,cortex-a7";
>> +			reg = <0xf00>;
>> +		};
>> +
> unnecessary empty line

     Okay, I will remove it.
>> +	};
>> +
>> +	amba {
>> +		compatible = "simple-bus";
>> +		#address-cells = <1>;
>> +		#size-cells = <1>;
>> +		ranges;
>> +
>> +		pdma: pdma@102a0000 {
>> +			compatible = "arm,pl330", "arm,primecell";
>> +			reg = <0x102a0000 0x4000>;
>> +			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
>> +			#dma-cells = <1>;
>> +			arm,pl330-broken-no-flushp;
>> +			clocks = <&cru ACLK_DMAC>;
>> +			clock-names = "apb_pclk";
>> +		};
>> +	};
>> +
>> +	arm-pmu {
>> +		compatible = "arm,cortex-a7-pmu";
>> +		interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
>> +	};
>> +
>> +
>> +	timer {
>> +		compatible = "arm,armv7-timer";
>> +		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) |
> IRQ_TYPE_LEVEL_HIGH)>,
>> +			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
> CPU_MASK_SIMPLE(4)? You only have one core, not 4.
>
>
>> +		clock-frequency = <24000000>;
>> +	};
>> +
>> +	xin24m: oscillator {
>> +		compatible = "fixed-clock";
>> +		clock-frequency = <24000000>;
>> +		clock-output-names = "xin24m";
>> +		#clock-cells = <0>;
>> +	};
>> +
>> +	bus_intmem@10080000 {
>> +		compatible = "mmio-sram";
>> +		reg = <0x10080000 0x2000>;
>> +		#address-cells = <1>;
>> +		#size-cells = <1>;
>> +		ranges = <0 0x10080000 0x2000>;
>> +	};
>> +
>> +	grf: syscon@10300000 {
>> +		compatible = "rockchip,rk1108-grf", "syscon";
>> +		reg = <0x10300000 0x1000>;
>> +	};
>> +
>> +	emmc: dwmmc@30110000 {
>> +		compatible = "rockchip,rk1108-dw-mshc", "rockchip,rk3288-dw-mshc";
>> +		clock-freq-min-max = <400000 150000000>;
>> +		clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
>> +			 <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
>> +		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
>> +		fifo-depth = <0x100>;
>> +		interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
>> +		reg = <0x30110000 0x4000>;
>> +		status = "disabled";
>> +	};
>> +
>> +	sdio: dwmmc@30120000 {
>> +		compatible = "rockchip,rk1108-dw-mshc", "rockchip,rk3288-dw-mshc";
>> +		clock-freq-min-max = <400000 150000000>;
>> +		clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>,
>> +			 <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>;
>> +		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
>> +		fifo-depth = <0x100>;
>> +		interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
>> +		reg = <0x30120000 0x4000>;
>> +		status = "disabled";
>> +	};
>> +
>> +	sdmmc: dwmmc@30130000 {
> ordering by register address please (uart2 before sdmmc etc; same for
> everything else)
>
>
>> +		compatible = "rockchip,rk1108-dw-mshc", "rockchip,rk3288-dw-mshc";
>> +		clock-freq-min-max = <400000 100000000>;
>> +		clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>,
>> +			 <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>;
>> +		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
>> +		fifo-depth = <0x100>;
>> +		interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
>> +		reg = <0x30130000 0x4000>;
>> +		status = "disabled";
>> +	};
>> +
>> +	uart2: serial@10210000 {
>> +		compatible = "rockchip,rk1108-uart", "snps,dw-apb-uart";
>> +		reg = <0x10210000 0x100>;
>> +		interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
>> +		reg-shift = <2>;
>> +		reg-io-width = <4>;
>> +		clock-frequency = <24000000>;
>> +		clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
>> +		clock-names = "baudclk", "apb_pclk";
>> +		pinctrl-names = "default";
>> +		pinctrl-0 = <&uart2m0_xfer>;
>> +		status = "disabled";
>> +	};
>> +
>> +	uart1: serial@10220000 {
>> +		compatible = "rockchip,rk1108-uart", "snps,dw-apb-uart";
>> +		reg = <0x10220000 0x100>;
>> +		interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
>> +		reg-shift = <2>;
>> +		reg-io-width = <4>;
>> +		clock-frequency = <24000000>;
>> +		clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
>> +		clock-names = "baudclk", "apb_pclk";
>> +		pinctrl-names = "default";
>> +		pinctrl-0 = <&uart1_xfer>;
>> +		status = "disabled";
>> +	};
>> +
>> +	uart0: serial@10230000 {
>> +		compatible = "rockchip,rk1108-uart", "snps,dw-apb-uart";
>> +		reg = <0x10230000 0x100>;
>> +		interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
>> +		reg-shift = <2>;
>> +		reg-io-width = <4>;
>> +		clock-frequency = <24000000>;
>> +		clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
>> +		clock-names = "baudclk", "apb_pclk";
>> +		pinctrl-names = "default";
>> +		pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
>> +		status = "disabled";
>> +	};
>> +
>> +	cru: clock-controller@20200000 {
>> +		compatible = "rockchip,rk1108-cru";
>> +		reg = <0x20200000 0x1000>;
>> +		rockchip,grf = <&grf>;
>> +		#clock-cells = <1>;
>> +		#reset-cells = <1>;
>> +	};
>> +
>> +	gic: interrupt-controller@32010000 {
>> +		compatible = "arm,cortex-a15-gic";
> compatible = "arm,gic-400"; ?
>
>> +		interrupt-controller;
>> +		#interrupt-cells = <3>;
>> +		#address-cells = <0>;
>> +
>> +		reg = <0x32011000 0x1000>,
>> +		      <0x32012000 0x1000>;
> please provide all 4 register areas and also the interrupt (

     I only found 2 register areas in our rockchip linux 3.10 source 
code. And haven't found the interrupt. From the arm,gic bindings, the 
interrupt property is optional. So am not sure if we
really need it here.
>
>> +	};
>> +
> [...]
>
>> diff --git a/arch/arm/mach-rockchip/rockchip.c
>> b/arch/arm/mach-rockchip/rockchip.c index a7ab9ec..e7fdf06 100644
>> --- a/arch/arm/mach-rockchip/rockchip.c
>> +++ b/arch/arm/mach-rockchip/rockchip.c
>> @@ -76,6 +76,7 @@ static void __init rockchip_dt_init(void)
>>   }
>>
>>   static const char * const rockchip_board_dt_compat[] = {
>> +	"rockchip,rk1108",
>>   	"rockchip,rk2928",
>>   	"rockchip,rk3066a",
>>   	"rockchip,rk3066b",
> please split this into a separate patch, as code and dts changes need to go
> through different branches.
>
>
> Thanks
> Heiko
>
>
>


--
To unsubscribe from this list: send the line "unsubscribe linux-clk" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Heiko Stuebner Nov. 8, 2016, 1:20 p.m. UTC | #4
Am Dienstag, 8. November 2016, 20:31:55 schrieb Andy Yan:
> Hi Heiko:
> 
> On 2016年11月04日 16:00, Heiko Stuebner wrote:
> > Am Donnerstag, 3. November 2016, 20:40:48 CET schrieb Andy Yan:

> >> +	gic: interrupt-controller@32010000 {
> >> +		compatible = "arm,cortex-a15-gic";
> > 
> > compatible = "arm,gic-400"; ?
> > 
> >> +		interrupt-controller;
> >> +		#interrupt-cells = <3>;
> >> +		#address-cells = <0>;
> >> +
> >> +		reg = <0x32011000 0x1000>,
> >> +		      <0x32012000 0x1000>;
> > 
> > please provide all 4 register areas and also the interrupt (
> 
>      I only found 2 register areas in our rockchip linux 3.10 source
> code. And haven't found the interrupt. From the arm,gic bindings, the
> interrupt property is optional. So am not sure if we
> really need it here.

Devicetree is a hardware description, so it's not a factor if we "need" it but 
only if it is present in the hardware. And we really want this information to 
be complete, as these additional areas are necessary if someone wants to use 
the virtualization extensions the cortext-A7 does contain.

The gic is a very standard component and the gic400 used here should definitly 
have those two additional areas as well as the interrupt.

I think the memory areas are pretty standard and should be for the rk1108:
reg = <0x32011000 0x1000>,
      <0x32012000 0x1000>,
      <0x32014000 0x2000>,
      <0x32016000 0x2000>;

The TRM talks about 128 SPI and 3 PPI interrupts but the irq-list does not 
contain them, so this seems to be an error in the TRM, as the gic interrupt 
should be one of those PPI interrupts.


Heiko

--
To unsubscribe from this list: send the line "unsubscribe linux-clk" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/arch/arm/boot/dts/rk1108.dtsi b/arch/arm/boot/dts/rk1108.dtsi
new file mode 100644
index 0000000..9dccfea
--- /dev/null
+++ b/arch/arm/boot/dts/rk1108.dtsi
@@ -0,0 +1,420 @@ 
+/*
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/rk1108-cru.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	compatible = "rockchip,rk1108";
+
+	interrupt-parent = <&gic>;
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@f00 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0xf00>;
+		};
+
+	};
+
+	amba {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		pdma: pdma@102a0000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x102a0000 0x4000>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			arm,pl330-broken-no-flushp;
+			clocks = <&cru ACLK_DMAC>;
+			clock-names = "apb_pclk";
+		};
+	};
+
+	arm-pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		clock-frequency = <24000000>;
+	};
+
+	xin24m: oscillator {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "xin24m";
+		#clock-cells = <0>;
+	};
+
+	bus_intmem@10080000 {
+		compatible = "mmio-sram";
+		reg = <0x10080000 0x2000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x10080000 0x2000>;
+	};
+
+	grf: syscon@10300000 {
+		compatible = "rockchip,rk1108-grf", "syscon";
+		reg = <0x10300000 0x1000>;
+	};
+
+	emmc: dwmmc@30110000 {
+		compatible = "rockchip,rk1108-dw-mshc", "rockchip,rk3288-dw-mshc";
+		clock-freq-min-max = <400000 150000000>;
+		clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
+			 <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+		fifo-depth = <0x100>;
+		interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+		reg = <0x30110000 0x4000>;
+		status = "disabled";
+	};
+
+	sdio: dwmmc@30120000 {
+		compatible = "rockchip,rk1108-dw-mshc", "rockchip,rk3288-dw-mshc";
+		clock-freq-min-max = <400000 150000000>;
+		clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>,
+			 <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>;
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+		fifo-depth = <0x100>;
+		interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+		reg = <0x30120000 0x4000>;
+		status = "disabled";
+	};
+
+	sdmmc: dwmmc@30130000 {
+		compatible = "rockchip,rk1108-dw-mshc", "rockchip,rk3288-dw-mshc";
+		clock-freq-min-max = <400000 100000000>;
+		clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>,
+			 <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>;
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+		fifo-depth = <0x100>;
+		interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+		reg = <0x30130000 0x4000>;
+		status = "disabled";
+	};
+
+	uart2: serial@10210000 {
+		compatible = "rockchip,rk1108-uart", "snps,dw-apb-uart";
+		reg = <0x10210000 0x100>;
+		interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		clock-frequency = <24000000>;
+		clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
+		clock-names = "baudclk", "apb_pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart2m0_xfer>;
+		status = "disabled";
+	};
+
+	uart1: serial@10220000 {
+		compatible = "rockchip,rk1108-uart", "snps,dw-apb-uart";
+		reg = <0x10220000 0x100>;
+		interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		clock-frequency = <24000000>;
+		clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
+		clock-names = "baudclk", "apb_pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart1_xfer>;
+		status = "disabled";
+	};
+
+	uart0: serial@10230000 {
+		compatible = "rockchip,rk1108-uart", "snps,dw-apb-uart";
+		reg = <0x10230000 0x100>;
+		interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		clock-frequency = <24000000>;
+		clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
+		clock-names = "baudclk", "apb_pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
+		status = "disabled";
+	};
+
+	cru: clock-controller@20200000 {
+		compatible = "rockchip,rk1108-cru";
+		reg = <0x20200000 0x1000>;
+		rockchip,grf = <&grf>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+	gic: interrupt-controller@32010000 {
+		compatible = "arm,cortex-a15-gic";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+
+		reg = <0x32011000 0x1000>,
+		      <0x32012000 0x1000>;
+	};
+
+	pinctrl: pinctrl {
+		compatible = "rockchip,rk1108-pinctrl";
+		rockchip,grf = <&grf>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		gpio0: gpio0@20030000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x20030000 0x100>;
+			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&xin24m>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio1: gpio1@10310000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x10310000 0x100>;
+			interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&xin24m>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio2: gpio2@10320000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x10320000 0x100>;
+			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&xin24m>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio3: gpio3@10330000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x10330000 0x100>;
+			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&xin24m>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		pcfg_pull_up: pcfg-pull-up {
+			bias-pull-up;
+		};
+
+		pcfg_pull_down: pcfg-pull-down {
+			bias-pull-down;
+		};
+
+		pcfg_pull_none: pcfg-pull-none {
+			bias-disable;
+		};
+
+		pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma {
+			drive-strength = <8>;
+		};
+
+		pcfg_pull_none_drv_12ma: pcfg-pull-none-drv-12ma {
+			drive-strength = <12>;
+		};
+
+		pcfg_pull_up_drv_8ma: pcfg-pull-up-drv-8ma {
+			bias-pull-up;
+			drive-strength = <8>;
+		};
+
+		pcfg_pull_none_drv_4ma: pcfg-pull-none-drv-4ma {
+			drive-strength = <4>;
+		};
+
+		pcfg_pull_up_drv_4ma: pcfg-pull-up-drv-4ma {
+			bias-pull-up;
+			drive-strength = <4>;
+		};
+
+		pcfg_output_high: pcfg-output-high {
+			output-high;
+		};
+
+		pcfg_output_low: pcfg-output-low {
+			output-low;
+		};
+
+		pcfg_input_high: pcfg-input-high {
+			bias-pull-up;
+			input-enable;
+		};
+
+		i2c1 {
+			i2c1_xfer: i2c1-xfer {
+				rockchip,pins = <2 RK_PD3 RK_FUNC_1 &pcfg_pull_up>,
+						<2 RK_PD4 RK_FUNC_1 &pcfg_pull_up>;
+			};
+		};
+
+		i2c2m1 {
+			i2c2m1_xfer: i2c2m1-xfer {
+				rockchip,pins = <0 RK_PC2 RK_FUNC_2 &pcfg_pull_none>,
+						<0 RK_PC6 RK_FUNC_3 &pcfg_pull_none>;
+			};
+
+			i2c2m1_gpio: i2c2m1-gpio {
+				rockchip,pins = <0 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>,
+						<0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
+			};
+		};
+
+		i2c2m05v {
+			i2c2m05v_xfer: i2c2m05v-xfer {
+				rockchip,pins = <1 RK_PD5 RK_FUNC_2 &pcfg_pull_none>,
+						<1 RK_PD4 RK_FUNC_2 &pcfg_pull_none>;
+			};
+
+			i2c2m05v_gpio: i2c2m05v-gpio {
+				rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>,
+						<1 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
+			};
+		};
+
+		i2c3 {
+			i2c3_xfer: i2c3-xfer {
+				rockchip,pins = <0 RK_PB6 RK_FUNC_1 &pcfg_pull_none>,
+						<0 RK_PC4 RK_FUNC_2 &pcfg_pull_none>;
+			};
+		};
+
+		uart0 {
+			uart0_xfer: uart0-xfer {
+				rockchip,pins = <3 RK_PA6 RK_FUNC_1 &pcfg_pull_up>,
+						<3 RK_PA5 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			uart0_cts: uart0-cts {
+				rockchip,pins = <3 RK_PA4 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			uart0_rts: uart0-rts {
+				rockchip,pins = <3 RK_PA3 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			uart0_rts_gpio: uart0-rts-gpio {
+				rockchip,pins = <3 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+			};
+		};
+
+		uart1 {
+			uart1_xfer: uart1-xfer {
+				rockchip,pins = <1 RK_PD3 RK_FUNC_1 &pcfg_pull_up>,
+						<1 RK_PD2 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			uart1_cts: uart1-cts {
+				rockchip,pins = <1 RK_PD0 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			uart1_rts: uart1-rts {
+				rockchip,pins = <1 RK_PD1 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
+		uart2m0 {
+			uart2m0_xfer: uart2m0-xfer {
+				rockchip,pins = <2 RK_PD2 RK_FUNC_1 &pcfg_pull_up>,
+						<2 RK_PD1 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
+		uart2m1 {
+			uart2m1_xfer: uart2m1-xfer {
+				rockchip,pins = <3 RK_PC3 RK_FUNC_2 &pcfg_pull_up>,
+						<3 RK_PC2 RK_FUNC_2 &pcfg_pull_none>;
+			};
+		};
+
+		uart2_5v {
+			uart2_5v_cts: uart2_5v-cts {
+				rockchip,pins = <1 RK_PD4 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			uart2_5v_rts: uart2_5v-rts {
+				rockchip,pins = <1 RK_PD5 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/mach-rockchip/rockchip.c b/arch/arm/mach-rockchip/rockchip.c
index a7ab9ec..e7fdf06 100644
--- a/arch/arm/mach-rockchip/rockchip.c
+++ b/arch/arm/mach-rockchip/rockchip.c
@@ -76,6 +76,7 @@  static void __init rockchip_dt_init(void)
 }
 
 static const char * const rockchip_board_dt_compat[] = {
+	"rockchip,rk1108",
 	"rockchip,rk2928",
 	"rockchip,rk3066a",
 	"rockchip,rk3066b",