diff mbox

[V4,4/6] ARM: tegra: Add Tegra30 GMI support

Message ID 1478507405-13204-5-git-send-email-mirza.krak@gmail.com (mailing list archive)
State Not Applicable
Headers show

Commit Message

Mirza Krak Nov. 7, 2016, 8:30 a.m. UTC 
From: Mirza Krak <mirza.krak@gmail.com>

Add a device node for the GMI controller found on Tegra30.

Signed-off-by: Mirza Krak <mirza.krak@gmail.com>
Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Tested-on: Colibri T20/T30 on EvalBoard V3.x and GMI-Memory Board
Acked-by: Jon Hunter <jonathanh@nvidia.com>
---

Changes in v2:
- added address-cells, size-cells and ranges properties

Changes in v3:
- no changes

Changes in v4:
- no changes

 arch/arm/boot/dts/tegra30.dtsi | 13 +++++++++++++
 1 file changed, 13 insertions(+)

--
2.1.4

--
To unsubscribe from this list: send the line "unsubscribe linux-clk" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Comments

Thierry Reding Nov. 7, 2016, 12:56 p.m. UTC | #1 
On Mon, Nov 07, 2016 at 09:30:03AM +0100, Mirza Krak wrote:
> From: Mirza Krak <mirza.krak@gmail.com>
> 
> Add a device node for the GMI controller found on Tegra30.
> 
> Signed-off-by: Mirza Krak <mirza.krak@gmail.com>
> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
> Tested-on: Colibri T20/T30 on EvalBoard V3.x and GMI-Memory Board
> Acked-by: Jon Hunter <jonathanh@nvidia.com>
> ---
> 
> Changes in v2:
> - added address-cells, size-cells and ranges properties
> 
> Changes in v3:
> - no changes
> 
> Changes in v4:
> - no changes
> 
>  arch/arm/boot/dts/tegra30.dtsi | 13 +++++++++++++
>  1 file changed, 13 insertions(+)

Applied, thanks.

Thierry
diff mbox

Patch

diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi
index 5030065..bbb1c00 100644
--- a/arch/arm/boot/dts/tegra30.dtsi
+++ b/arch/arm/boot/dts/tegra30.dtsi
@@ -439,6 +439,19 @@ 
 		status = "disabled";
 	};

+	gmi@70009000 {
+		compatible = "nvidia,tegra30-gmi";
+		reg = <0x70009000 0x1000>;
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges = <0 0 0x48000000 0x7ffffff>;
+		clocks = <&tegra_car TEGRA30_CLK_NOR>;
+		clock-names = "gmi";
+		resets = <&tegra_car 42>;
+		reset-names = "gmi";
+		status = "disabled";
+	};
+
 	pwm: pwm@7000a000 {
 		compatible = "nvidia,tegra30-pwm", "nvidia,tegra20-pwm";
 		reg = <0x7000a000 0x100>;