Message ID | 1486522955-14528-3-git-send-email-baoyou.xie@linaro.org (mailing list archive) |
---|---|
State | Superseded |
Headers | show |
On Wed, Feb 08, 2017 at 11:02:35AM +0800, Baoyou Xie wrote: > The pclk is necessary for zx2967 I2S controller. the driver > currently doesn't handle it. This is something we need to fix. > > In turn, the driver supports zx296718's I2S controller. > > By the way, this patch also change the clock name from tx to wclk > to make it clear. > > Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> > --- > sound/soc/zte/zx-i2s.c | 37 ++++++++++++++++++++++++++++--------- > 1 file changed, 28 insertions(+), 9 deletions(-) > > diff --git a/sound/soc/zte/zx-i2s.c b/sound/soc/zte/zx-i2s.c > index ed7a56d..2d486ea 100644 > --- a/sound/soc/zte/zx-i2s.c > +++ b/sound/soc/zte/zx-i2s.c > @@ -95,7 +95,7 @@ > struct zx_i2s_info { > struct snd_dmaengine_dai_dma_data dma_playback; > struct snd_dmaengine_dai_dma_data dma_capture; > - struct clk *dai_clk; > + struct clk *dai_wclk, *dai_pclk; It's better to have them on two lines, I would say. > void __iomem *reg_base; > int master; > resource_size_t mapbase; > @@ -275,8 +275,9 @@ static int zx_i2s_hw_params(struct snd_pcm_substream *substream, > writel_relaxed(val, i2s->reg_base + ZX_I2S_TIMING_CTRL); > > if (i2s->master) > - ret = clk_set_rate(i2s->dai_clk, > - params_rate(params) * ch_num * CLK_RAT); > + ret = clk_set_rate(i2s->dai_wclk, > + params_rate(params) * ch_num * CLK_RAT); > + > return ret; > } > > @@ -328,8 +329,19 @@ static int zx_i2s_startup(struct snd_pcm_substream *substream, > struct snd_soc_dai *dai) > { > struct zx_i2s_info *zx_i2s = dev_get_drvdata(dai->dev); > + int ret; > + > + ret = clk_prepare_enable(zx_i2s->dai_wclk); > + if (ret) > + return ret; > + > + ret = clk_prepare_enable(zx_i2s->dai_pclk); > + if (ret) { > + clk_disable_unprepare(zx_i2s->dai_wclk); > + return ret; > + } > > - return clk_prepare_enable(zx_i2s->dai_clk); > + return ret; > } > > static void zx_i2s_shutdown(struct snd_pcm_substream *substream, > @@ -337,7 +349,8 @@ static void zx_i2s_shutdown(struct snd_pcm_substream *substream, > { > struct zx_i2s_info *zx_i2s = dev_get_drvdata(dai->dev); > > - clk_disable_unprepare(zx_i2s->dai_clk); > + clk_disable_unprepare(zx_i2s->dai_wclk); > + clk_disable_unprepare(zx_i2s->dai_pclk); > } > > static struct snd_soc_dai_ops zx_i2s_dai_ops = { > @@ -381,10 +394,16 @@ static int zx_i2s_probe(struct platform_device *pdev) > if (!zx_i2s) > return -ENOMEM; > > - zx_i2s->dai_clk = devm_clk_get(&pdev->dev, "tx"); > - if (IS_ERR(zx_i2s->dai_clk)) { > - dev_err(&pdev->dev, "Fail to get clk\n"); > - return PTR_ERR(zx_i2s->dai_clk); > + zx_i2s->dai_wclk = devm_clk_get(&pdev->dev, "wclk"); > + if (IS_ERR(zx_i2s->dai_wclk)) { > + dev_err(&pdev->dev, "Fail to get wclk\n"); > + return PTR_ERR(zx_i2s->dai_wclk); > + } > + > + zx_i2s->dai_pclk = devm_clk_get(&pdev->dev, "pclk"); > + if (IS_ERR(zx_i2s->dai_pclk)) { > + dev_info(&pdev->dev, "have no pclk\n"); > + zx_i2s->dai_pclk = NULL; The 'pclk' is actually required instead of optional. Since we haven't got any in-tree DTB with I2S device yet, there is no DT compatibility to maintain. So it should be good to make 'pclk' required right now. Shawn > } > > res = platform_get_resource(pdev, IORESOURCE_MEM, 0); > -- > 2.7.4 > -- To unsubscribe from this list: send the line "unsubscribe linux-clk" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/sound/soc/zte/zx-i2s.c b/sound/soc/zte/zx-i2s.c index ed7a56d..2d486ea 100644 --- a/sound/soc/zte/zx-i2s.c +++ b/sound/soc/zte/zx-i2s.c @@ -95,7 +95,7 @@ struct zx_i2s_info { struct snd_dmaengine_dai_dma_data dma_playback; struct snd_dmaengine_dai_dma_data dma_capture; - struct clk *dai_clk; + struct clk *dai_wclk, *dai_pclk; void __iomem *reg_base; int master; resource_size_t mapbase; @@ -275,8 +275,9 @@ static int zx_i2s_hw_params(struct snd_pcm_substream *substream, writel_relaxed(val, i2s->reg_base + ZX_I2S_TIMING_CTRL); if (i2s->master) - ret = clk_set_rate(i2s->dai_clk, - params_rate(params) * ch_num * CLK_RAT); + ret = clk_set_rate(i2s->dai_wclk, + params_rate(params) * ch_num * CLK_RAT); + return ret; } @@ -328,8 +329,19 @@ static int zx_i2s_startup(struct snd_pcm_substream *substream, struct snd_soc_dai *dai) { struct zx_i2s_info *zx_i2s = dev_get_drvdata(dai->dev); + int ret; + + ret = clk_prepare_enable(zx_i2s->dai_wclk); + if (ret) + return ret; + + ret = clk_prepare_enable(zx_i2s->dai_pclk); + if (ret) { + clk_disable_unprepare(zx_i2s->dai_wclk); + return ret; + } - return clk_prepare_enable(zx_i2s->dai_clk); + return ret; } static void zx_i2s_shutdown(struct snd_pcm_substream *substream, @@ -337,7 +349,8 @@ static void zx_i2s_shutdown(struct snd_pcm_substream *substream, { struct zx_i2s_info *zx_i2s = dev_get_drvdata(dai->dev); - clk_disable_unprepare(zx_i2s->dai_clk); + clk_disable_unprepare(zx_i2s->dai_wclk); + clk_disable_unprepare(zx_i2s->dai_pclk); } static struct snd_soc_dai_ops zx_i2s_dai_ops = { @@ -381,10 +394,16 @@ static int zx_i2s_probe(struct platform_device *pdev) if (!zx_i2s) return -ENOMEM; - zx_i2s->dai_clk = devm_clk_get(&pdev->dev, "tx"); - if (IS_ERR(zx_i2s->dai_clk)) { - dev_err(&pdev->dev, "Fail to get clk\n"); - return PTR_ERR(zx_i2s->dai_clk); + zx_i2s->dai_wclk = devm_clk_get(&pdev->dev, "wclk"); + if (IS_ERR(zx_i2s->dai_wclk)) { + dev_err(&pdev->dev, "Fail to get wclk\n"); + return PTR_ERR(zx_i2s->dai_wclk); + } + + zx_i2s->dai_pclk = devm_clk_get(&pdev->dev, "pclk"); + if (IS_ERR(zx_i2s->dai_pclk)) { + dev_info(&pdev->dev, "have no pclk\n"); + zx_i2s->dai_pclk = NULL; } res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
The pclk is necessary for zx2967 I2S controller. the driver currently doesn't handle it. This is something we need to fix. In turn, the driver supports zx296718's I2S controller. By the way, this patch also change the clock name from tx to wclk to make it clear. Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> --- sound/soc/zte/zx-i2s.c | 37 ++++++++++++++++++++++++++++--------- 1 file changed, 28 insertions(+), 9 deletions(-)