diff mbox

[05/11] arm64: dts: Add clock DT nodes for Stingray SOC

Message ID 1494071686-19098-6-git-send-email-anup.patel@broadcom.com (mailing list archive)
State Superseded
Headers show

Commit Message

Anup Patel May 6, 2017, 11:54 a.m. UTC
From: Sandeep Tripathy <sandeep.tripathy@broadcom.com>

This patch describes Stingray SOC clock tree using
DT nodes in Stingray DTS.

Signed-off-by: Sandeep Tripathy <sandeep.tripathy@broadcom.com>
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
Reviewed-by: Scott Branden <scott.branden@broadcom.com>
---
 .../boot/dts/broadcom/stingray/stingray-clock.dtsi | 162 +++++++++++++++++++++
 .../arm64/boot/dts/broadcom/stingray/stingray.dtsi |   2 +
 2 files changed, 164 insertions(+)
 create mode 100644 arch/arm64/boot/dts/broadcom/stingray/stingray-clock.dtsi
diff mbox

Patch

diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray-clock.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray-clock.dtsi
new file mode 100644
index 0000000..32af238f
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/stingray/stingray-clock.dtsi
@@ -0,0 +1,162 @@ 
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2016-2017 Broadcom.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <dt-bindings/clock/bcm-sr.h>
+
+	osc: oscillator {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <50000000>;
+	};
+
+	crmu_ref25m: crmu_ref25m {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&osc>;
+		clock-div = <2>;
+		clock-mult = <1>;
+	};
+
+	genpll0: genpll0@6641d104 {
+		#clock-cells = <1>;
+		compatible = "brcm,sr-genpll0";
+		reg = <0x6641d104 0x32>,
+		      <0x6641c854 0x4>;
+		clocks = <&osc>;
+		clock-output-names = "genpll0", "clk_125", "clk_scr", "clk_250",
+				     "clk_pcie_axi", "clk_paxc_axi_x2",
+				     "clk_paxc_axi";
+	};
+
+	genpll3: genpll3@6641d1e0 {
+		#clock-cells = <1>;
+		compatible = "brcm,sr-genpll3";
+		reg = <0x6641d1e0 0x32>,
+		      <0x6641c854 0x4>;
+		clocks = <&osc>;
+		clock-output-names = "genpll3", "clk_hsls", "clk_sdio";
+	};
+
+	genpll4: genpll4@6641d214 {
+		#clock-cells = <1>;
+		compatible = "brcm,sr-genpll4";
+		reg = <0x6641d214 0x32>,
+		      <0x6641c854 0x4>;
+		clocks = <&osc>;
+		clock-output-names = "genpll4", "clk_ccn", "clk_tpiu_pll",
+				"noc_clk", "pll_chclk_fs4", "clk_bridge_fscpu";
+	};
+
+	genpll5: genpll5@6641d248 {
+		#clock-cells = <1>;
+		compatible = "brcm,sr-genpll5";
+		reg = <0x6641d248 0x32>,
+		      <0x6641c870 0x4>;
+		clocks = <&osc>;
+		clock-output-names = "genpll5", "fs4_hf_clk",
+			"crypto_ae_clk", "raid_ae_clk";
+	};
+
+	lcpll0: lcpll0 {
+		#clock-cells = <1>;
+		compatible = "brcm,sr-lcpll0";
+		reg = <0x6641d0c4 0x3c>, <0x6641c870 0x4>;
+		clocks = <&osc>;
+		clock-output-names = "lcpll0", "clk_sata_refp",
+			"clk_sata_refn", "clk_sata_350", "clk_sata_500";
+	};
+
+	lcpll1: lcpll1 {
+		#clock-cells = <1>;
+		compatible = "brcm,sr-lcpll1";
+		reg = <0x6641d138 0x3c>, <0x6641c870 0x4>;
+		clocks = <&osc>;
+		clock-output-names = "lcpll1", "clk_wanpn",
+				"clk_usb_ref", "timesync_evt_clk";
+	};
+
+	hsls_clk: hsls_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&genpll3 1>;
+		clock-div = <1>;
+		clock-mult = <1>;
+	};
+
+	hsls_div2_clk: hsls_div2_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&genpll3 BCM_SR_GENPLL3_HSLS_CLK>;
+		clock-div = <2>;
+		clock-mult = <1>;
+
+	};
+
+	hsls_div4_clk: hsls_div4_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&genpll3 BCM_SR_GENPLL3_HSLS_CLK>;
+		clock-div = <4>;
+		clock-mult = <1>;
+	};
+
+	hsls_25m_clk: hsls_25m_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&crmu_ref25m>;
+		clock-div = <1>;
+		clock-mult = <1>;
+	};
+
+	hsls_25m_div2_clk: hsls_25m_div2_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&hsls_25m_clk>;
+		clock-div = <2>;
+		clock-mult = <1>;
+	};
+
+	sdio0_clk: sdio0_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&genpll3 BCM_SR_GENPLL3_SDIO_CLK>;
+		clock-div = <1>;
+		clock-mult = <1>;
+	};
+
+	sdio1_clk: sdio1_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&genpll3 BCM_SR_GENPLL3_SDIO_CLK>;
+		clock-div = <1>;
+		clock-mult = <1>;
+	};
diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
index f08b37e..c60de96 100644
--- a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
+++ b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
@@ -255,6 +255,8 @@ 
 		#size-cells = <1>;
 		ranges = <0 0 0 0xffffffff>;
 
+		#include "stingray-clock.dtsi"
+
 		uart0: uart@68a00000 {
 			device_type = "serial";
 			compatible = "snps,dw-apb-uart";