Message ID | 1494856763-6543-2-git-send-email-aisheng.dong@nxp.com (mailing list archive) |
---|---|
State | Changes Requested |
Headers | show |
On 05/15, Dong Aisheng wrote: > --- > drivers/clk/clk-divider.c | 2 ++ > include/linux/clk-provider.h | 4 ++++ > 2 files changed, 6 insertions(+) > > diff --git a/drivers/clk/clk-divider.c b/drivers/clk/clk-divider.c > index 96386ff..f78ba7a 100644 > --- a/drivers/clk/clk-divider.c > +++ b/drivers/clk/clk-divider.c > @@ -125,6 +125,8 @@ unsigned long divider_recalc_rate(struct clk_hw *hw, unsigned long parent_rate, > > div = _get_div(table, val, flags, divider->width); > if (!div) { > + if (flags & CLK_DIVIDER_ZERO_GATE) > + return 0; > WARN(!(flags & CLK_DIVIDER_ALLOW_ZERO), Why not use the CLK_DIVIDER_ALLOW_ZERO flag? A clk being off doesn't mean the rate is 0. The divider is just disabled, so we would consider the rate as whatever the parent is, which is what this code does before this patch. Similarly, we don't do anything about gate clocks and return a rate of 0 when they're disabled. > "%s: Zero divisor and CLK_DIVIDER_ALLOW_ZERO not set\n", > clk_hw_get_name(hw));
Hi Stephen, On Mon, Jun 19, 2017 at 06:45:12PM -0700, Stephen Boyd wrote: > On 05/15, Dong Aisheng wrote: > > --- > > drivers/clk/clk-divider.c | 2 ++ > > include/linux/clk-provider.h | 4 ++++ > > 2 files changed, 6 insertions(+) > > > > diff --git a/drivers/clk/clk-divider.c b/drivers/clk/clk-divider.c > > index 96386ff..f78ba7a 100644 > > --- a/drivers/clk/clk-divider.c > > +++ b/drivers/clk/clk-divider.c > > @@ -125,6 +125,8 @@ unsigned long divider_recalc_rate(struct clk_hw *hw, unsigned long parent_rate, > > > > div = _get_div(table, val, flags, divider->width); > > if (!div) { > > + if (flags & CLK_DIVIDER_ZERO_GATE) > > + return 0; > > WARN(!(flags & CLK_DIVIDER_ALLOW_ZERO), > > Why not use the CLK_DIVIDER_ALLOW_ZERO flag? A clk being off > doesn't mean the rate is 0. The divider is just disabled, so we > would consider the rate as whatever the parent is, which is what > this code does before this patch. Similarly, we don't do anything > about gate clocks and return a rate of 0 when they're disabled. > The semantic of CLK_DIVIDER_ALLOW_ZERO seems a bit different. See below definition: * CLK_DIVIDER_ALLOW_ZERO - Allow zero divisors. For dividers which have * CLK_DIVIDER_ONE_BASED set, it is possible to end up with a zero divisor. * Some hardware implementations gracefully handle this case and allow a * zero divisor by not modifying their input clock * (divide by one / bypass). zero divisor is simply as divide by one or bypass which is supported by hardware. But it's not true for this hardware. If we consider the rate as whatever the parent is if divider is zero, we may got an issue like below: e.g. Assuming spll_bus_clk divider is 0x0 and it may be enabled by users directly without setting a rate first. Then the clock tree looks like: ... spll_pfd0 1 1 500210526 0 0 spll_pfd_sel 1 1 500210526 0 0 spll_sel 1 1 500210526 0 0 spll_bus_clk 1 1 500210526 0 0 But the spll_bus_clk clock rate actually is wrong and it's even not enabled, not like CLK_DIVIDER_ALLOW_ZERO which zero divider means simply bypass. So for this case, we probably can't simply assume zero divider rate as its parent, it is actually set to 0 in hw, although it's something like gate, but a bit different from gate as the normal gate does not affect divider where you can keep the rate. How would you suggest for this? Regards Dong Aisheng > > "%s: Zero divisor and CLK_DIVIDER_ALLOW_ZERO not set\n", > > clk_hw_get_name(hw)); > > -- > Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, > a Linux Foundation Collaborative Project > -- > To unsubscribe from this list: send the line "unsubscribe linux-clk" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-clk" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Stephen, > -----Original Message----- > From: Dong Aisheng [mailto:dongas86@gmail.com] > Sent: Tuesday, June 20, 2017 5:08 PM > To: Stephen Boyd > Cc: A.s. Dong; linux-clk@vger.kernel.org; linux-kernel@vger.kernel.org; > linux-arm-kernel@lists.infradead.org; mturquette@baylibre.com; > shawnguo@kernel.org; Anson Huang; Jacky Bai > Subject: Re: [PATCH 1/9] clk: clk-divider: add CLK_DIVIDER_ZERO_GATE clk > support > > Hi Stephen, > > On Mon, Jun 19, 2017 at 06:45:12PM -0700, Stephen Boyd wrote: > > On 05/15, Dong Aisheng wrote: > > > --- > > > drivers/clk/clk-divider.c | 2 ++ > > > include/linux/clk-provider.h | 4 ++++ > > > 2 files changed, 6 insertions(+) > > > > > > diff --git a/drivers/clk/clk-divider.c b/drivers/clk/clk-divider.c > > > index 96386ff..f78ba7a 100644 > > > --- a/drivers/clk/clk-divider.c > > > +++ b/drivers/clk/clk-divider.c > > > @@ -125,6 +125,8 @@ unsigned long divider_recalc_rate(struct clk_hw > > > *hw, unsigned long parent_rate, > > > > > > div = _get_div(table, val, flags, divider->width); > > > if (!div) { > > > + if (flags & CLK_DIVIDER_ZERO_GATE) > > > + return 0; > > > WARN(!(flags & CLK_DIVIDER_ALLOW_ZERO), > > > > Why not use the CLK_DIVIDER_ALLOW_ZERO flag? A clk being off doesn't > > mean the rate is 0. The divider is just disabled, so we would consider > > the rate as whatever the parent is, which is what this code does > > before this patch. Similarly, we don't do anything about gate clocks > > and return a rate of 0 when they're disabled. > > > > The semantic of CLK_DIVIDER_ALLOW_ZERO seems a bit different. > > See below definition: > * CLK_DIVIDER_ALLOW_ZERO - Allow zero divisors. For dividers which have > * CLK_DIVIDER_ONE_BASED set, it is possible to end up with a zero > divisor. > * Some hardware implementations gracefully handle this case and allow > a > * zero divisor by not modifying their input clock > * (divide by one / bypass). > > zero divisor is simply as divide by one or bypass which is supported by > hardware. > > But it's not true for this hardware. > > If we consider the rate as whatever the parent is if divider is zero, we > may got an issue like below: > e.g. > Assuming spll_bus_clk divider is 0x0 and it may be enabled by users > directly without setting a rate first. > > Then the clock tree looks like: > ... > spll_pfd0 1 1 500210526 0 0 > spll_pfd_sel 1 1 500210526 0 0 > spll_sel 1 1 500210526 0 0 > spll_bus_clk 1 1 500210526 0 0 > > But the spll_bus_clk clock rate actually is wrong and it's even not > enabled, not like CLK_DIVIDER_ALLOW_ZERO which zero divider means simply > bypass. > > So for this case, we probably can't simply assume zero divider rate as its > parent, it is actually set to 0 in hw, although it's something like gate, > but a bit different from gate as the normal gate does not affect divider > where you can keep the rate. > > How would you suggest for this? > Any suggestions? Regards Dong Aisheng > Regards > Dong Aisheng > > > > "%s: Zero divisor and CLK_DIVIDER_ALLOW_ZERO not set\n", > > > clk_hw_get_name(hw)); > > > > -- > > Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a > > Linux Foundation Collaborative Project > > -- > > To unsubscribe from this list: send the line "unsubscribe linux-clk" > > in the body of a message to majordomo@vger.kernel.org More majordomo > > info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-clk" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 06/20, Dong Aisheng wrote: > Hi Stephen, > > On Mon, Jun 19, 2017 at 06:45:12PM -0700, Stephen Boyd wrote: > > On 05/15, Dong Aisheng wrote: > > > --- > > > drivers/clk/clk-divider.c | 2 ++ > > > include/linux/clk-provider.h | 4 ++++ > > > 2 files changed, 6 insertions(+) > > > > > > diff --git a/drivers/clk/clk-divider.c b/drivers/clk/clk-divider.c > > > index 96386ff..f78ba7a 100644 > > > --- a/drivers/clk/clk-divider.c > > > +++ b/drivers/clk/clk-divider.c > > > @@ -125,6 +125,8 @@ unsigned long divider_recalc_rate(struct clk_hw *hw, unsigned long parent_rate, > > > > > > div = _get_div(table, val, flags, divider->width); > > > if (!div) { > > > + if (flags & CLK_DIVIDER_ZERO_GATE) > > > + return 0; > > > WARN(!(flags & CLK_DIVIDER_ALLOW_ZERO), > > > > Why not use the CLK_DIVIDER_ALLOW_ZERO flag? A clk being off > > doesn't mean the rate is 0. The divider is just disabled, so we > > would consider the rate as whatever the parent is, which is what > > this code does before this patch. Similarly, we don't do anything > > about gate clocks and return a rate of 0 when they're disabled. > > > > The semantic of CLK_DIVIDER_ALLOW_ZERO seems a bit different. > > See below definition: > * CLK_DIVIDER_ALLOW_ZERO - Allow zero divisors. For dividers which have > * CLK_DIVIDER_ONE_BASED set, it is possible to end up with a zero divisor. > * Some hardware implementations gracefully handle this case and allow a > * zero divisor by not modifying their input clock > * (divide by one / bypass). > > zero divisor is simply as divide by one or bypass which is supported by > hardware. > > But it's not true for this hardware. > > If we consider the rate as whatever the parent is if divider is zero, > we may got an issue like below: > e.g. > Assuming spll_bus_clk divider is 0x0 and it may be enabled by users directly > without setting a rate first. > > Then the clock tree looks like: > ... > spll_pfd0 1 1 500210526 0 0 > spll_pfd_sel 1 1 500210526 0 0 > spll_sel 1 1 500210526 0 0 > spll_bus_clk 1 1 500210526 0 0 > > But the spll_bus_clk clock rate actually is wrong and it's even not enabled, > not like CLK_DIVIDER_ALLOW_ZERO which zero divider means simply bypass. > > So for this case, we probably can't simply assume zero divider rate as its > parent, it is actually set to 0 in hw, although it's something like gate, > but a bit different from gate as the normal gate does not affect divider > where you can keep the rate. > > How would you suggest for this? > It seems that set_rate() and enable/disable are conflated here. From what you describe, it sounds like the clk is considered off when the divider value is zero, and it's on when the divider value is non-zero. I'd suggest you make it so this clk supports enable/disable and set_rate with the same register. Something like, set rate when the clk is disabled will cache the rate request and only when the clk is enabled will the driver actually program the hardware to have the requested divider value. Similarly, when the clk is disabled we'll write a 0 there, but when the clk is enabled we'll restore whatever rate (divider) was chosen last. It does mean that recalc rate will be sort of odd, because when the clk is off it will return 0, and when the clk is on it will return the right rate. So to make things work, we'll need to return the cached rate in recalc rate when the clk is off and read the hardware when the clk is on. Probably an if register == 0 then lookup in cache, otherwise do normal division.
diff --git a/drivers/clk/clk-divider.c b/drivers/clk/clk-divider.c index 96386ff..f78ba7a 100644 --- a/drivers/clk/clk-divider.c +++ b/drivers/clk/clk-divider.c @@ -125,6 +125,8 @@ unsigned long divider_recalc_rate(struct clk_hw *hw, unsigned long parent_rate, div = _get_div(table, val, flags, divider->width); if (!div) { + if (flags & CLK_DIVIDER_ZERO_GATE) + return 0; WARN(!(flags & CLK_DIVIDER_ALLOW_ZERO), "%s: Zero divisor and CLK_DIVIDER_ALLOW_ZERO not set\n", clk_hw_get_name(hw)); diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h index a428aec..a6efbb9 100644 --- a/include/linux/clk-provider.h +++ b/include/linux/clk-provider.h @@ -385,6 +385,9 @@ struct clk_div_table { * CLK_DIVIDER_MAX_AT_ZERO - For dividers which are like CLK_DIVIDER_ONE_BASED * except when the value read from the register is zero, the divisor is * 2^width of the field. + * CLK_DIVIDER_ZERO_GATE - For dividers which are like CLK_DIVIDER_ONE_BASED + * when the value read from the register is zero, it means the divisor + * output is disabled and the rate calculated will be 0. */ struct clk_divider { struct clk_hw hw; @@ -405,6 +408,7 @@ struct clk_divider { #define CLK_DIVIDER_ROUND_CLOSEST BIT(4) #define CLK_DIVIDER_READ_ONLY BIT(5) #define CLK_DIVIDER_MAX_AT_ZERO BIT(6) +#define CLK_DIVIDER_ZERO_GATE BIT(7) extern const struct clk_ops clk_divider_ops; extern const struct clk_ops clk_divider_ro_ops;
For dividers with zero indicating clock is disabled, instead of giving a warning each time like "clkx: Zero divisor and CLK_DIVIDER_ALLOW_ZERO not set" in exist code, we'd consider it as a normal case and just return 0 in divider_recalc_rate function. For such clocks users should be aware of setting a correct rate before using. e.g. 000b - Clock disabled 001b - Divide by 1 010b - Divide by 2 ... Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> --- drivers/clk/clk-divider.c | 2 ++ include/linux/clk-provider.h | 4 ++++ 2 files changed, 6 insertions(+)