diff mbox

[v3,2/2] arm64: dts: add sp804 timer node for Hi3660

Message ID 1495428748-11153-3-git-send-email-leo.yan@linaro.org (mailing list archive)
State Not Applicable
Headers show

Commit Message

Leo Yan May 22, 2017, 4:52 a.m. UTC
The Hi3660 SoC comes with the sp804 timer in addition to the
architecture timers. These ones are shutdown when reaching a deep idle
states and a backup timer is needed. The sp804 belongs to another power
domain and can fulfill the purpose of replacing temporarily an
architecture timer when the CPU is idle.

Describe it in the device tree, so it can be enabled at boot time.

Suggested-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
---
 arch/arm64/boot/dts/hisilicon/hi3660.dtsi | 11 +++++++++++
 1 file changed, 11 insertions(+)

Comments

Wei Xu June 15, 2017, 8 p.m. UTC | #1
Hi Leo,

On 2017/5/22 5:52, Leo Yan wrote:
> The Hi3660 SoC comes with the sp804 timer in addition to the
> architecture timers. These ones are shutdown when reaching a deep idle
> states and a backup timer is needed. The sp804 belongs to another power
> domain and can fulfill the purpose of replacing temporarily an
> architecture timer when the CPU is idle.
> 
> Describe it in the device tree, so it can be enabled at boot time.
> 
> Suggested-by: Daniel Lezcano <daniel.lezcano@linaro.org>
> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
> Signed-off-by: Leo Yan <leo.yan@linaro.org>
> ---
>  arch/arm64/boot/dts/hisilicon/hi3660.dtsi | 11 +++++++++++
>  1 file changed, 11 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
> index 138fcba..f75c792 100644
> --- a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
> +++ b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
> @@ -173,6 +173,17 @@
>  			#clock-cells = <1>;
>  		};
>  
> +		dual_timer0: timer@fff14000 {
> +			compatible = "arm,sp804", "arm,primecell";
> +			reg = <0x0 0xfff14000 0x0 0x1000>;
> +			interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&crg_ctrl HI3660_OSC32K>,
> +				 <&crg_ctrl HI3660_OSC32K>,
> +				 <&crg_ctrl HI3660_OSC32K>;
> +			clock-names = "timer1", "timer2", "apb_pclk";
> +		};
> +
>  		ufs: ufs@ff3b0000 {
>  			compatible = "jedec,ufs-1.1", "hisilicon,hi3660-ufs";
>  			reg = <0x0 0xff3b0000 0x0 0x1000>, /* 0: HCI standard */
> 

Since the dts part is not depended on the driver and Guodong has put this into another
patch set[1], I will pick up that one.
Thanks!

[1]: https://lkml.org/lkml/2017/6/14/1049

BR,
Wei

--
To unsubscribe from this list: send the line "unsubscribe linux-clk" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Leo Yan June 15, 2017, 11:59 p.m. UTC | #2
On Thu, Jun 15, 2017 at 09:00:58PM +0100, Wei Xu wrote:

[...]

> Since the dts part is not depended on the driver and Guodong has put this into another
> patch set[1], I will pick up that one.
> Thanks!
> 
> [1]: https://lkml.org/lkml/2017/6/14/1049

Yeah, thanks for picking up from Guodong's patch set.

Thanks,
Leo Yan
--
To unsubscribe from this list: send the line "unsubscribe linux-clk" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
index 138fcba..f75c792 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
@@ -173,6 +173,17 @@ 
 			#clock-cells = <1>;
 		};
 
+		dual_timer0: timer@fff14000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x0 0xfff14000 0x0 0x1000>;
+			interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg_ctrl HI3660_OSC32K>,
+				 <&crg_ctrl HI3660_OSC32K>,
+				 <&crg_ctrl HI3660_OSC32K>;
+			clock-names = "timer1", "timer2", "apb_pclk";
+		};
+
 		ufs: ufs@ff3b0000 {
 			compatible = "jedec,ufs-1.1", "hisilicon,hi3660-ufs";
 			reg = <0x0 0xff3b0000 0x0 0x1000>, /* 0: HCI standard */