[v4,07/11] arm64: dts: Add pinctrl DT nodes for Stingray SOC

Message ID	1495454307-23464-8-git-send-email-anup.patel@broadcom.com (mailing list archive)
State	Superseded
Headers	show Return-Path: <linux-clk-owner@kernel.org> From: Anup Patel <anup.patel@broadcom.com> To: Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com>, Michael Turquette <mturquette@baylibre.com>, Stephen Boyd <sboyd@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com>, Will Deacon <will.deacon@arm.com>, Ray Jui <rjui@broadcom.com>, Scott Branden <sbranden@broadcom.com>, Jon Mason <jonmason@broadcom.com>, Florian Fainelli <f.fainelli@gmail.com>, Oza Pawandeep <oza.oza@broadcom.com>, Srinath Mannam <srinath.mannam@broadcom.com>, Pramod Kumar <pramod.kumar@broadcom.com>, Sandeep Tripathy <sandeep.tripathy@broadcom.com>, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-clk@vger.kernel.org, linux-arm-kernel@lists.infradead.org, bcm-kernel-feedback-list@broadcom.com, Anup Patel <anup.patel@broadcom.com> Subject: [PATCH v4 07/11] arm64: dts: Add pinctrl DT nodes for Stingray SOC Date: Mon, 22 May 2017 17:28:23 +0530 Message-Id: <1495454307-23464-8-git-send-email-anup.patel@broadcom.com> In-Reply-To: <1495454307-23464-1-git-send-email-anup.patel@broadcom.com> References: <1495454307-23464-1-git-send-email-anup.patel@broadcom.com> Sender: linux-clk-owner@vger.kernel.org Precedence: bulk

diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray-pinctrl.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray-pinctrl.dtsi new file mode 100644 index 0000000..af5d480 --- /dev/null +++ b/arch/arm64/boot/dts/broadcom/stingray/stingray-pinctrl.dtsi @@ -0,0 +1,345 @@ +/* + * BSD LICENSE + * + * Copyright(c) 2016-2017 Broadcom. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Broadcom nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include <dt-bindings/pinctrl/brcm,pinctrl-stingray.h> + + pinconf: pinconf@68a40000 { + compatible = "pinconf-single"; + reg = <0x00140000 0x250>; + pinctrl-single,register-width = <32>; + + /* pinconf functions */ + }; + + pinmux: pinmux@68a4029c { + compatible = "pinctrl-single"; + reg = <0x0014029c 0x250>; + #address-cells = <1>; + #size-cells = <1>; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0xf>; + pinctrl-single,gpio-range = < + &range 0 154 MODE_GPIO + >; + range: gpio-range { + #pinctrl-single,gpio-range-cells = <3>; + }; + + /* pinctrl functions */ + tsio_pins: pinmux_gpio_14 { + pinctrl-single,pins = < + 0x038 MODE_NITRO /* tsio_0 */ + 0x03c MODE_NITRO /* tsio_1 */ + >; + }; + + nor_pins: pinmux_pnor_adv_n { + pinctrl-single,pins = < + 0x0ac MODE_PNOR /* nand_ce1_n */ + 0x0b0 MODE_PNOR /* nand_ce0_n */ + 0x0b4 MODE_PNOR /* nand_we_n */ + 0x0b8 MODE_PNOR /* nand_wp_n */ + 0x0bc MODE_PNOR /* nand_re_n */ + 0x0c0 MODE_PNOR /* nand_rdy_bsy_n */ + 0x0c4 MODE_PNOR /* nand_io0_0 */ + 0x0c8 MODE_PNOR /* nand_io1_0 */ + 0x0cc MODE_PNOR /* nand_io2_0 */ + 0x0d0 MODE_PNOR /* nand_io3_0 */ + 0x0d4 MODE_PNOR /* nand_io4_0 */ + 0x0d8 MODE_PNOR /* nand_io5_0 */ + 0x0dc MODE_PNOR /* nand_io6_0 */ + 0x0e0 MODE_PNOR /* nand_io7_0 */ + 0x0e4 MODE_PNOR /* nand_io8_0 */ + 0x0e8 MODE_PNOR /* nand_io9_0 */ + 0x0ec MODE_PNOR /* nand_io10_0 */ + 0x0f0 MODE_PNOR /* nand_io11_0 */ + 0x0f4 MODE_PNOR /* nand_io12_0 */ + 0x0f8 MODE_PNOR /* nand_io13_0 */ + 0x0fc MODE_PNOR /* nand_io14_0 */ + 0x100 MODE_PNOR /* nand_io15_0 */ + 0x104 MODE_PNOR /* nand_ale_0 */ + 0x108 MODE_PNOR /* nand_cle_0 */ + 0x040 MODE_PNOR /* pnor_adv_n */ + 0x044 MODE_PNOR /* pnor_baa_n */ + 0x048 MODE_PNOR /* pnor_bls_0_n */ + 0x04c MODE_PNOR /* pnor_bls_1_n */ + 0x050 MODE_PNOR /* pnor_cre */ + 0x054 MODE_PNOR /* pnor_cs_2_n */ + 0x058 MODE_PNOR /* pnor_cs_1_n */ + 0x05c MODE_PNOR /* pnor_cs_0_n */ + 0x060 MODE_PNOR /* pnor_we_n */ + 0x064 MODE_PNOR /* pnor_oe_n */ + 0x068 MODE_PNOR /* pnor_intr */ + 0x06c MODE_PNOR /* pnor_dat_0 */ + 0x070 MODE_PNOR /* pnor_dat_1 */ + 0x074 MODE_PNOR /* pnor_dat_2 */ + 0x078 MODE_PNOR /* pnor_dat_3 */ + 0x07c MODE_PNOR /* pnor_dat_4 */ + 0x080 MODE_PNOR /* pnor_dat_5 */ + 0x084 MODE_PNOR /* pnor_dat_6 */ + 0x088 MODE_PNOR /* pnor_dat_7 */ + 0x08c MODE_PNOR /* pnor_dat_8 */ + 0x090 MODE_PNOR /* pnor_dat_9 */ + 0x094 MODE_PNOR /* pnor_dat_10 */ + 0x098 MODE_PNOR /* pnor_dat_11 */ + 0x09c MODE_PNOR /* pnor_dat_12 */ + 0x0a0 MODE_PNOR /* pnor_dat_13 */ + 0x0a4 MODE_PNOR /* pnor_dat_14 */ + 0x0a8 MODE_PNOR /* pnor_dat_15 */ + >; + }; + + nand_pins: pinmux_nand_ce1_n { + pinctrl-single,pins = < + 0x0ac MODE_NAND /* nand_ce1_n */ + 0x0b0 MODE_NAND /* nand_ce0_n */ + 0x0b4 MODE_NAND /* nand_we_n */ + 0x0b8 MODE_NAND /* nand_wp_n */ + 0x0bc MODE_NAND /* nand_re_n */ + 0x0c0 MODE_NAND /* nand_rdy_bsy_n */ + 0x0c4 MODE_NAND /* nand_io0_0 */ + 0x0c8 MODE_NAND /* nand_io1_0 */ + 0x0cc MODE_NAND /* nand_io2_0 */ + 0x0d0 MODE_NAND /* nand_io3_0 */ + 0x0d4 MODE_NAND /* nand_io4_0 */ + 0x0d8 MODE_NAND /* nand_io5_0 */ + 0x0dc MODE_NAND /* nand_io6_0 */ + 0x0e0 MODE_NAND /* nand_io7_0 */ + 0x0e4 MODE_NAND /* nand_io8_0 */ + 0x0e8 MODE_NAND /* nand_io9_0 */ + 0x0ec MODE_NAND /* nand_io10_0 */ + 0x0f0 MODE_NAND /* nand_io11_0 */ + 0x0f4 MODE_NAND /* nand_io12_0 */ + 0x0f8 MODE_NAND /* nand_io13_0 */ + 0x0fc MODE_NAND /* nand_io14_0 */ + 0x100 MODE_NAND /* nand_io15_0 */ + 0x104 MODE_NAND /* nand_ale_0 */ + 0x108 MODE_NAND /* nand_cle_0 */ + >; + }; + + pwm0_pins: pinmux_pwm_0 { + pinctrl-single,pins = < + 0x10c MODE_NITRO + >; + }; + + pwm1_pins: pinmux_pwm_1 { + pinctrl-single,pins = < + 0x110 MODE_NITRO + >; + }; + + pwm2_pins: pinmux_pwm_2 { + pinctrl-single,pins = < + 0x114 MODE_NITRO + >; + }; + + pwm3_pins: pinmux_pwm_3 { + pinctrl-single,pins = < + 0x118 MODE_NITRO + >; + }; + + dbu_rxd_pins: pinmux_uart1_sin_nitro { + pinctrl-single,pins = < + 0x11c MODE_NITRO /* dbu_rxd */ + 0x120 MODE_NITRO /* dbu_txd */ + >; + }; + + uart1_pins: pinmux_uart1_sin_nand { + pinctrl-single,pins = < + 0x11c MODE_NAND /* uart1_sin */ + 0x120 MODE_NAND /* uart1_out */ + >; + }; + + uart2_pins: pinmux_uart2_sin { + pinctrl-single,pins = < + 0x124 MODE_NITRO /* uart2_sin */ + 0x128 MODE_NITRO /* uart2_out */ + >; + }; + + uart3_pins: pinmux_uart3_sin { + pinctrl-single,pins = < + 0x12c MODE_NITRO /* uart3_sin */ + 0x130 MODE_NITRO /* uart3_out */ + >; + }; + + i2s_pins: pinmux_i2s_bitclk { + pinctrl-single,pins = < + 0x134 MODE_NITRO /* i2s_bitclk */ + 0x138 MODE_NITRO /* i2s_sdout */ + 0x13c MODE_NITRO /* i2s_sdin */ + 0x140 MODE_NITRO /* i2s_ws */ + 0x144 MODE_NITRO /* i2s_mclk */ + 0x148 MODE_NITRO /* i2s_spdif_out */ + >; + }; + + qspi_pins: pinumx_qspi_hold_n { + pinctrl-single,pins = < + 0x14c MODE_NAND /* qspi_hold_n */ + 0x150 MODE_NAND /* qspi_wp_n */ + 0x154 MODE_NAND /* qspi_sck */ + 0x158 MODE_NAND /* qspi_cs_n */ + 0x15c MODE_NAND /* qspi_mosi */ + 0x160 MODE_NAND /* qspi_miso */ + >; + }; + + mdio_pins: pinumx_ext_mdio { + pinctrl-single,pins = < + 0x164 MODE_NITRO /* ext_mdio */ + 0x168 MODE_NITRO /* ext_mdc */ + >; + }; + + i2c0_pins: pinmux_i2c0_sda { + pinctrl-single,pins = < + 0x16c MODE_NITRO /* i2c0_sda */ + 0x170 MODE_NITRO /* i2c0_scl */ + >; + }; + + i2c1_pins: pinmux_i2c1_sda { + pinctrl-single,pins = < + 0x174 MODE_NITRO /* i2c1_sda */ + 0x178 MODE_NITRO /* i2c1_scl */ + >; + }; + + sdio0_pins: pinmux_sdio0_cd_l { + pinctrl-single,pins = < + 0x17c MODE_NITRO /* sdio0_cd_l */ + 0x180 MODE_NITRO /* sdio0_clk_sdcard */ + 0x184 MODE_NITRO /* sdio0_data0 */ + 0x188 MODE_NITRO /* sdio0_data1 */ + 0x18c MODE_NITRO /* sdio0_data2 */ + 0x190 MODE_NITRO /* sdio0_data3 */ + 0x194 MODE_NITRO /* sdio0_data4 */ + 0x198 MODE_NITRO /* sdio0_data5 */ + 0x19c MODE_NITRO /* sdio0_data6 */ + 0x1a0 MODE_NITRO /* sdio0_data7 */ + 0x1a4 MODE_NITRO /* sdio0_cmd */ + 0x1a8 MODE_NITRO /* sdio0_emmc_rst_n */ + 0x1ac MODE_NITRO /* sdio0_led_on */ + 0x1b0 MODE_NITRO /* sdio0_wp */ + >; + }; + + sdio1_pins: pinmux_sdio1_cd_l { + pinctrl-single,pins = < + 0x1b4 MODE_NITRO /* sdio1_cd_l */ + 0x1b8 MODE_NITRO /* sdio1_clk_sdcard */ + 0x1bc MODE_NITRO /* sdio1_data0 */ + 0x1c0 MODE_NITRO /* sdio1_data1 */ + 0x1c4 MODE_NITRO /* sdio1_data2 */ + 0x1c8 MODE_NITRO /* sdio1_data3 */ + 0x1cc MODE_NITRO /* sdio1_data4 */ + 0x1d0 MODE_NITRO /* sdio1_data5 */ + 0x1d4 MODE_NITRO /* sdio1_data6 */ + 0x1d8 MODE_NITRO /* sdio1_data7 */ + 0x1dc MODE_NITRO /* sdio1_cmd */ + 0x1e0 MODE_NITRO /* sdio1_emmc_rst_n */ + 0x1e4 MODE_NITRO /* sdio1_led_on */ + 0x1e8 MODE_NITRO /* sdio1_wp */ + >; + }; + + spi0_pins: pinmux_spi0_sck_nand { + pinctrl-single,pins = < + 0x1ec MODE_NITRO /* spi0_sck */ + 0x1f0 MODE_NITRO /* spi0_rxd */ + 0x1f4 MODE_NITRO /* spi0_fss */ + 0x1f8 MODE_NITRO /* spi0_txd */ + >; + }; + + spi1_pins: pinmux_spi1_sck_nand { + pinctrl-single,pins = < + 0x1fc MODE_NITRO /* spi1_sck */ + 0x200 MODE_NITRO /* spi1_rxd */ + 0x204 MODE_NITRO /* spi1_fss */ + 0x208 MODE_NITRO /* spi1_txd */ + >; + }; + + nuart_pins: pinmux_uart0_sin_nitro { + pinctrl-single,pins = < + 0x20c MODE_NITRO /* nuart_rxd */ + 0x210 MODE_NITRO /* nuart_txd */ + >; + }; + + uart0_pins: pinumux_uart0_sin_nand { + pinctrl-single,pins = < + 0x20c MODE_NAND /* uart0_sin */ + 0x210 MODE_NAND /* uart0_out */ + 0x214 MODE_NAND /* uart0_rts */ + 0x218 MODE_NAND /* uart0_cts */ + 0x21c MODE_NAND /* uart0_dtr */ + 0x220 MODE_NAND /* uart0_dcd */ + 0x224 MODE_NAND /* uart0_dsr */ + 0x228 MODE_NAND /* uart0_ri */ + >; + }; + + drdu2_pins: pinmux_drdu2_overcurrent { + pinctrl-single,pins = < + 0x22c MODE_NITRO /* drdu2_overcurrent */ + 0x230 MODE_NITRO /* drdu2_vbus_ppc */ + 0x234 MODE_NITRO /* drdu2_vbus_present */ + 0x238 MODE_NITRO /* drdu2_id */ + >; + }; + + drdu3_pins: pinmux_drdu3_overcurrent { + pinctrl-single,pins = < + 0x23c MODE_NITRO /* drdu3_overcurrent */ + 0x240 MODE_NITRO /* drdu3_vbus_ppc */ + 0x244 MODE_NITRO /* drdu3_vbus_present */ + 0x248 MODE_NITRO /* drdu3_id */ + >; + }; + + usb3h_pins: pinmux_usb3h_overcurrent { + pinctrl-single,pins = < + 0x24c MODE_NITRO /* usb3h_overcurrent */ + 0x250 MODE_NITRO /* usb3h_vbus_ppc */ + >; + }; + }; diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi index 003f814..a4afd44 100644 --- a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi +++ b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi @@ -259,6 +259,8 @@ #size-cells = <1>; ranges = <0x0 0x0 0x68900000 0x17700000>; + #include "stingray-pinctrl.dtsi" + uart0: uart@68a00000 { device_type = "serial"; compatible = "snps,dw-apb-uart"; diff --git a/include/dt-bindings/pinctrl/brcm,pinctrl-stingray.h b/include/dt-bindings/pinctrl/brcm,pinctrl-stingray.h new file mode 100644 index 0000000..caa6c66 --- /dev/null +++ b/include/dt-bindings/pinctrl/brcm,pinctrl-stingray.h @@ -0,0 +1,68 @@ +/* + * BSD LICENSE + * + * Copyright(c) 2017 Broadcom Corporation. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Broadcom Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef __DT_BINDINGS_PINCTRL_BRCM_STINGRAY_H__ +#define __DT_BINDINGS_PINCTRL_BRCM_STINGRAY_H__ + +/* Alternate functions available in MUX controller */ +#define MODE_NITRO 0 +#define MODE_NAND 1 +#define MODE_PNOR 2 +#define MODE_GPIO 3 + +/* Pad configuration attribute */ +#define PAD_SLEW_RATE_ENA (1 << 0) +#define PAD_SLEW_RATE_ENA_MASK (1 << 0) + +#define PAD_DRIVE_STRENGTH_2_MA (0 << 1) +#define PAD_DRIVE_STRENGTH_4_MA (1 << 1) +#define PAD_DRIVE_STRENGTH_6_MA (2 << 1) +#define PAD_DRIVE_STRENGTH_8_MA (3 << 1) +#define PAD_DRIVE_STRENGTH_10_MA (4 << 1) +#define PAD_DRIVE_STRENGTH_12_MA (5 << 1) +#define PAD_DRIVE_STRENGTH_14_MA (6 << 1) +#define PAD_DRIVE_STRENGTH_16_MA (7 << 1) +#define PAD_DRIVE_STRENGTH_MASK (7 << 1) + +#define PAD_PULL_UP_ENA (1 << 4) +#define PAD_PULL_UP_ENA_MASK (1 << 4) + +#define PAD_PULL_DOWN_ENA (1 << 5) +#define PAD_PULL_DOWN_ENA_MASK (1 << 5) + +#define PAD_INPUT_PATH_DIS (1 << 6) +#define PAD_INPUT_PATH_DIS_MASK (1 << 6) + +#define PAD_HYSTERESIS_ENA (1 << 7) +#define PAD_HYSTERESIS_ENA_MASK (1 << 7) + +#endif

[v4,07/11] arm64: dts: Add pinctrl DT nodes for Stingray SOC

Commit Message

Patch