diff mbox

clk: bulk: call of_clk_get() when id is NULL

Message ID 1502243442-28055-1-git-send-email-shawnguo@kernel.org (mailing list archive)
State Superseded, archived
Headers show

Commit Message

Shawn Guo Aug. 9, 2017, 1:50 a.m. UTC
From: Shawn Guo <shawn.guo@linaro.org>

Most of clk API users have their clocks defined in device tree, and
client drivers will have to parse clk ids from DT 'clock-names'
property before using clk_bulk_get().  This is a burden for client
driver code.  And 'clock-names' being an optional DT property makes
it even worse.  The client driver will have no way to provide clock
id.

The patch makes a little improvement on clk_bulk_get() to call
of_clk_get() with index for DT users, if clock id is not available,
so that client drivers working with DT can use clk_bulk_get() to
retrieve clocks more easily.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---
 drivers/clk/clk-bulk.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

Comments

Stephen Boyd Aug. 9, 2017, 5:33 p.m. UTC | #1
On 08/09, Shawn Guo wrote:
> From: Shawn Guo <shawn.guo@linaro.org>
> 
> Most of clk API users have their clocks defined in device tree, and
> client drivers will have to parse clk ids from DT 'clock-names'
> property before using clk_bulk_get().  This is a burden for client
> driver code.  And 'clock-names' being an optional DT property makes
> it even worse.  The client driver will have no way to provide clock
> id.
> 
> The patch makes a little improvement on clk_bulk_get() to call
> of_clk_get() with index for DT users, if clock id is not available,
> so that client drivers working with DT can use clk_bulk_get() to
> retrieve clocks more easily.
> 
> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
> ---
>  drivers/clk/clk-bulk.c | 5 ++++-
>  1 file changed, 4 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/clk/clk-bulk.c b/drivers/clk/clk-bulk.c
> index c834f5abfc49..65cee595a67e 100644
> --- a/drivers/clk/clk-bulk.c
> +++ b/drivers/clk/clk-bulk.c
> @@ -39,7 +39,10 @@ int __must_check clk_bulk_get(struct device *dev, int num_clks,
>  		clks[i].clk = NULL;
>  
>  	for (i = 0; i < num_clks; i++) {
> -		clks[i].clk = clk_get(dev, clks[i].id);
> +		if (clks[i].id)
> +			clks[i].clk = clk_get(dev, clks[i].id);
> +		else if (dev->of_node)
> +			clks[i].clk = of_clk_get(dev->of_node, i);

This seems a little too magical. The omission of an id in an
array of clks would mean that only that one clk is acquired
through of_clk_get(). We could have a mixture of ids and no ids
for some device, and then do very odd things.

How about we add a flag to clk_bulk_data that indicates we want
it to use of_clk_get() instead of clk_get() for all of the clks?
Then the id is ignored for the entire function.

Also, this patch needs to document the new behavior somewhere in
the kernel-doc for this function.
Shawn Guo Aug. 10, 2017, 1:31 a.m. UTC | #2
Hi Stephen,

Thanks for the review comments.

On Wed, Aug 09, 2017 at 10:33:18AM -0700, Stephen Boyd wrote:
> On 08/09, Shawn Guo wrote:
> > From: Shawn Guo <shawn.guo@linaro.org>
> > 
> > Most of clk API users have their clocks defined in device tree, and
> > client drivers will have to parse clk ids from DT 'clock-names'
> > property before using clk_bulk_get().  This is a burden for client
> > driver code.  And 'clock-names' being an optional DT property makes
> > it even worse.  The client driver will have no way to provide clock
> > id.
> > 
> > The patch makes a little improvement on clk_bulk_get() to call
> > of_clk_get() with index for DT users, if clock id is not available,
> > so that client drivers working with DT can use clk_bulk_get() to
> > retrieve clocks more easily.
> > 
> > Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
> > ---
> >  drivers/clk/clk-bulk.c | 5 ++++-
> >  1 file changed, 4 insertions(+), 1 deletion(-)
> > 
> > diff --git a/drivers/clk/clk-bulk.c b/drivers/clk/clk-bulk.c
> > index c834f5abfc49..65cee595a67e 100644
> > --- a/drivers/clk/clk-bulk.c
> > +++ b/drivers/clk/clk-bulk.c
> > @@ -39,7 +39,10 @@ int __must_check clk_bulk_get(struct device *dev, int num_clks,
> >  		clks[i].clk = NULL;
> >  
> >  	for (i = 0; i < num_clks; i++) {
> > -		clks[i].clk = clk_get(dev, clks[i].id);
> > +		if (clks[i].id)
> > +			clks[i].clk = clk_get(dev, clks[i].id);
> > +		else if (dev->of_node)
> > +			clks[i].clk = of_clk_get(dev->of_node, i);
> 
> This seems a little too magical. The omission of an id in an
> array of clks would mean that only that one clk is acquired
> through of_clk_get(). We could have a mixture of ids and no ids
> for some device, and then do very odd things.

Yes, I agree.

> How about we add a flag to clk_bulk_data that indicates we want
> it to use of_clk_get() instead of clk_get() for all of the clks?
> Then the id is ignored for the entire function.

Good suggestion.

> Also, this patch needs to document the new behavior somewhere in
> the kernel-doc for this function.

Okay, I will take care of it with the new version.

Shawn
--
To unsubscribe from this list: send the line "unsubscribe linux-clk" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/clk/clk-bulk.c b/drivers/clk/clk-bulk.c
index c834f5abfc49..65cee595a67e 100644
--- a/drivers/clk/clk-bulk.c
+++ b/drivers/clk/clk-bulk.c
@@ -39,7 +39,10 @@  int __must_check clk_bulk_get(struct device *dev, int num_clks,
 		clks[i].clk = NULL;
 
 	for (i = 0; i < num_clks; i++) {
-		clks[i].clk = clk_get(dev, clks[i].id);
+		if (clks[i].id)
+			clks[i].clk = clk_get(dev, clks[i].id);
+		else if (dev->of_node)
+			clks[i].clk = of_clk_get(dev->of_node, i);
 		if (IS_ERR(clks[i].clk)) {
 			ret = PTR_ERR(clks[i].clk);
 			dev_err(dev, "Failed to get clk '%s': %d\n",