deleted file mode 100644
@@ -1,68 +0,0 @@
-* Renesas R-Car USB 2.0 clock selector
-
-This file provides information on what the device node for the R-Car USB 2.0
-clock selector.
-
-If you connect an external clock to the USB_EXTAL pin only, you should set
-the clock rate to "usb_extal" node only.
-If you connect an oscillator to both the USB_XTAL and USB_EXTAL, this module
-is not needed because this is default setting. (Of course, you can set the
-clock rates to both "usb_extal" and "usb_xtal" nodes.
-
-Case 1: An external clock connects to R-Car SoC
- +----------+ +--- R-Car ---------------------+
- |External |---|USB_EXTAL ---> all usb channels|
- |clock | |USB_XTAL |
- +----------+ +-------------------------------+
-In this case, we need this driver with "usb_extal" clock.
-
-Case 2: An oscillator connects to R-Car SoC
- +----------+ +--- R-Car ---------------------+
- |Oscillator|---|USB_EXTAL -+-> all usb channels|
- | |---|USB_XTAL --+ |
- +----------+ +-------------------------------+
-In this case, we don't need this selector.
-
-Required properties:
-- compatible: "renesas,r8a7795-rcar-usb2-clock-sel" if the device is a part of
- an R8A7795 SoC.
- "renesas,r8a7796-rcar-usb2-clock-sel" if the device if a part of
- an R8A77960 SoC.
- "renesas,r8a77961-rcar-usb2-clock-sel" if the device if a part of
- an R8A77961 SoC.
- "renesas,rcar-gen3-usb2-clock-sel" for a generic R-Car Gen3
- compatible device.
-
- When compatible with the generic version, nodes must list the
- SoC-specific version corresponding to the platform first
- followed by the generic version.
-
-- reg: offset and length of the USB 2.0 clock selector register block.
-- clocks: A list of phandles and specifier pairs.
-- clock-names: Name of the clocks.
- - The functional clock of USB 2.0 host side must be "ehci_ohci"
- - The functional clock of HS-USB side must be "hs-usb-if"
- - The USB_EXTAL clock pin must be "usb_extal"
- - The USB_XTAL clock pin must be "usb_xtal"
-- #clock-cells: Must be 0
-- power-domains: A phandle and symbolic PM domain specifier.
- See power/renesas,rcar-sysc.yaml.
-- resets: A list of phandles and specifier pairs.
-- reset-names: Name of the resets.
- - The reset of USB 2.0 host side must be "ehci_ohci"
- - The reset of HS-USB side must be "hs-usb-if"
-
-Example (R-Car H3):
-
- usb2_clksel: clock-controller@e6590630 {
- compatible = "renesas,r8a7795-rcar-usb2-clock-sel",
- "renesas,rcar-gen3-usb2-clock-sel";
- reg = <0 0xe6590630 0 0x02>;
- clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>,
- <&usb_extal>, <&usb_xtal>;
- clock-names = "ehci_ohci", "hs-usb-if", "usb_extal", "usb_xtal";
- #clock-cells = <0>;
- power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
- resets = <&cpg 703>, <&cpg 704>;
- reset-names = "ehci_ohci", "hs-usb-if";
- };
new file mode 100644
@@ -0,0 +1,100 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/clock/renesas,rcar-usb2-clock-sel.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Renesas R-Car USB 2.0 clock selector
+
+maintainers:
+ - Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
+
+description: |
+ If you connect an external clock to the USB_EXTAL pin only, you should set
+ the clock rate to "usb_extal" node only.
+ If you connect an oscillator to both the USB_XTAL and USB_EXTAL, this module
+ is not needed because this is default setting. (Of course, you can set the
+ clock rates to both "usb_extal" and "usb_xtal" nodes.
+
+ Case 1: An external clock connects to R-Car SoC
+ +----------+ +--- R-Car ---------------------+
+ |External |---|USB_EXTAL ---> all usb channels|
+ |clock | |USB_XTAL |
+ +----------+ +-------------------------------+
+
+ In this case, we need this driver with "usb_extal" clock.
+
+ Case 2: An oscillator connects to R-Car SoC
+ +----------+ +--- R-Car ---------------------+
+ |Oscillator|---|USB_EXTAL -+-> all usb channels|
+ | |---|USB_XTAL --+ |
+ +----------+ +-------------------------------+
+ In this case, we don't need this selector.
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - renesas,r8a7795-rcar-usb2-clock-sel # R-Car H3
+ - renesas,r8a7796-rcar-usb2-clock-sel # R-Car M3-W
+ - renesas,r8a77961-rcar-usb2-clock-sel # R-Car M3-W+
+ - const: renesas,rcar-gen3-usb2-clock-sel
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ minItems: 4
+ maxItems: 4
+
+ clock-names:
+ items:
+ - const: ehci_ohci
+ - const: hs-usb-if
+ - const: usb_extal
+ - const: usb_xtal
+
+ '#clock-cells':
+ const: 0
+
+ power-domains:
+ maxItems: 1
+
+ resets:
+ minItems: 2
+ maxItems: 2
+
+ reset-names:
+ items:
+ - const: ehci_ohci
+ - const: hs-usb-if
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - '#clock-cells'
+ - power-domains
+ - resets
+ - reset-names
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/r8a7795-cpg-mssr.h>
+ #include <dt-bindings/power/r8a7795-sysc.h>
+
+ usb2_clksel: clock-controller@e6590630 {
+ compatible = "renesas,r8a7795-rcar-usb2-clock-sel",
+ "renesas,rcar-gen3-usb2-clock-sel";
+ reg = <0xe6590630 0x02>;
+ clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>,
+ <&usb_extal>, <&usb_xtal>;
+ clock-names = "ehci_ohci", "hs-usb-if", "usb_extal", "usb_xtal";
+ #clock-cells = <0>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 703>, <&cpg 704>;
+ reset-names = "ehci_ohci", "hs-usb-if";
+ };
Convert Renesas R-Car USB 2.0 clock selector bindings documentation to json-schema. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> --- .../bindings/clock/renesas,rcar-usb2-clock-sel.txt | 68 -------------- .../clock/renesas,rcar-usb2-clock-sel.yaml | 100 +++++++++++++++++++++ 2 files changed, 100 insertions(+), 68 deletions(-) delete mode 100644 Documentation/devicetree/bindings/clock/renesas,rcar-usb2-clock-sel.txt create mode 100644 Documentation/devicetree/bindings/clock/renesas,rcar-usb2-clock-sel.yaml