| Message ID | 20160607204154.31967-2-maxime.ripard@free-electrons.com (mailing list archive) |
|---|---|
| State | Superseded, archived |
| Headers | show |
On Wed, Jun 8, 2016 at 4:41 AM, Maxime Ripard <maxime.ripard@free-electrons.com> wrote: > Introduce a new binding with its documentation for the brand new clock > sub-framework. > > Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> > --- > Documentation/devicetree/bindings/clock/sunxi-ccu.txt | 17 +++++++++++++++++ > 1 file changed, 17 insertions(+) > create mode 100644 Documentation/devicetree/bindings/clock/sunxi-ccu.txt > > diff --git a/Documentation/devicetree/bindings/clock/sunxi-ccu.txt b/Documentation/devicetree/bindings/clock/sunxi-ccu.txt > new file mode 100644 > index 000000000000..2c66046a1342 > --- /dev/null > +++ b/Documentation/devicetree/bindings/clock/sunxi-ccu.txt > @@ -0,0 +1,17 @@ > +Allwinner Clock Control Unit Binding > +------------------------------------ > + > +Required properties : > +- compatible: must contain one of the following compatible: > + - "allwinner,sun8i-h3-ccu" > + > +- reg: Must contain the registers base address and length > +- clocks: phandle to the oscillators feeding the SPI controller. Two are SPI? copy paste error? > + needed: > + - "hosc": the high frequency oscillator (usually at 24MHz) > + - "losc": the low frequency oscillator (usually at 32kHz) > +- clock-names: Must contain the clock names described just above > +- #clock-cells : must contain 1 > +- #reset-cells : must contain 1 > + > +Example: No example? Maybe just remove this section then. ChenYu > -- > 2.8.3 > -- To unsubscribe from this list: send the line "unsubscribe linux-clk" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/clock/sunxi-ccu.txt b/Documentation/devicetree/bindings/clock/sunxi-ccu.txt new file mode 100644 index 000000000000..2c66046a1342 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/sunxi-ccu.txt @@ -0,0 +1,17 @@ +Allwinner Clock Control Unit Binding +------------------------------------ + +Required properties : +- compatible: must contain one of the following compatible: + - "allwinner,sun8i-h3-ccu" + +- reg: Must contain the registers base address and length +- clocks: phandle to the oscillators feeding the SPI controller. Two are + needed: + - "hosc": the high frequency oscillator (usually at 24MHz) + - "losc": the low frequency oscillator (usually at 32kHz) +- clock-names: Must contain the clock names described just above +- #clock-cells : must contain 1 +- #reset-cells : must contain 1 + +Example:
Introduce a new binding with its documentation for the brand new clock sub-framework. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> --- Documentation/devicetree/bindings/clock/sunxi-ccu.txt | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) create mode 100644 Documentation/devicetree/bindings/clock/sunxi-ccu.txt