@@ -210,6 +210,7 @@ config COMMON_CLK_OXNAS
source "drivers/clk/bcm/Kconfig"
source "drivers/clk/hisilicon/Kconfig"
+source "drivers/clk/imgtec/Kconfig"
source "drivers/clk/meson/Kconfig"
source "drivers/clk/mvebu/Kconfig"
source "drivers/clk/qcom/Kconfig"
@@ -60,6 +60,7 @@ obj-y += bcm/
obj-$(CONFIG_ARCH_BERLIN) += berlin/
obj-$(CONFIG_H8300) += h8300/
obj-$(CONFIG_ARCH_HISI) += hisilicon/
+obj-y += imgtec/
obj-$(CONFIG_ARCH_MXC) += imx/
obj-$(CONFIG_MACH_INGENIC) += ingenic/
obj-$(CONFIG_COMMON_CLK_KEYSTONE) += keystone/
new file mode 100644
@@ -0,0 +1,10 @@
+config COMMON_CLK_BOSTON
+ bool "Clock driver for MIPS Boston boards"
+ depends on MIPS || COMPILE_TEST
+ depends on OF
+ select MFD_SYSCON
+ ---help---
+ Enable this to support the system & CPU clocks on the MIPS Boston
+ development board from Imagination Technologies. These are simple
+ fixed rate clocks whose rate is determined by reading a platform
+ provided register.
new file mode 100644
@@ -0,0 +1 @@
+obj-$(CONFIG_COMMON_CLK_BOSTON) += clk-boston.o
new file mode 100644
@@ -0,0 +1,101 @@
+/*
+ * Copyright (C) 2016 Imagination Technologies
+ * Author: Paul Burton <paul.burton@imgtec.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <linux/mfd/syscon.h>
+
+#include <dt-bindings/clock/boston-clock.h>
+
+#define BOSTON_PLAT_MMCMDIV 0x30
+# define BOSTON_PLAT_MMCMDIV_CLK0DIV (0xff << 0)
+# define BOSTON_PLAT_MMCMDIV_INPUT (0xff << 8)
+# define BOSTON_PLAT_MMCMDIV_MUL (0xff << 16)
+# define BOSTON_PLAT_MMCMDIV_CLK1DIV (0xff << 24)
+
+#define BOSTON_CLK_COUNT 3
+
+struct clk_boston_state {
+ struct clk *clks[BOSTON_CLK_COUNT];
+ struct clk_onecell_data onecell_data;
+};
+
+static u32 ext_field(u32 val, u32 mask)
+{
+ return (val & mask) >> (ffs(mask) - 1);
+}
+
+static void __init clk_boston_setup(struct device_node *np)
+{
+ unsigned long in_freq, cpu_freq, sys_freq;
+ uint mmcmdiv, mul, cpu_div, sys_div;
+ struct clk_boston_state *state;
+ struct regmap *regmap;
+ struct clk *clk;
+ int err;
+
+ regmap = syscon_regmap_lookup_by_phandle(np, "regmap");
+ if (IS_ERR(regmap)) {
+ pr_err("failed to find regmap\n");
+ return;
+ }
+
+ err = regmap_read(regmap, BOSTON_PLAT_MMCMDIV, &mmcmdiv);
+ if (err) {
+ pr_err("failed to read mmcm_div register: %d\n", err);
+ return;
+ }
+
+ in_freq = ext_field(mmcmdiv, BOSTON_PLAT_MMCMDIV_INPUT) * 1000000;
+ mul = ext_field(mmcmdiv, BOSTON_PLAT_MMCMDIV_MUL);
+
+ sys_div = ext_field(mmcmdiv, BOSTON_PLAT_MMCMDIV_CLK0DIV);
+ sys_freq = mult_frac(in_freq, mul, sys_div);
+
+ cpu_div = ext_field(mmcmdiv, BOSTON_PLAT_MMCMDIV_CLK1DIV);
+ cpu_freq = mult_frac(in_freq, mul, cpu_div);
+
+ state = kzalloc(sizeof(*state), GFP_KERNEL);
+ if (!state)
+ return;
+
+ clk = clk_register_fixed_rate(NULL, "input", NULL, 0, in_freq);
+ if (IS_ERR(clk)) {
+ pr_err("failed to register input clock: %ld\n", PTR_ERR(clk));
+ return;
+ }
+ state->clks[BOSTON_CLK_INPUT] = clk;
+
+ clk = clk_register_fixed_rate(NULL, "sys", "input", 0, sys_freq);
+ if (IS_ERR(clk)) {
+ pr_err("failed to register sys clock: %ld\n", PTR_ERR(clk));
+ return;
+ }
+ state->clks[BOSTON_CLK_SYS] = clk;
+
+ clk = clk_register_fixed_rate(NULL, "cpu", "input", 0, cpu_freq);
+ if (IS_ERR(clk)) {
+ pr_err("failed to register cpu clock: %ld\n", PTR_ERR(clk));
+ return;
+ }
+ state->clks[BOSTON_CLK_CPU] = clk;
+
+ state->onecell_data.clks = state->clks;
+ state->onecell_data.clk_num = BOSTON_CLK_COUNT;
+
+ err = of_clk_add_provider(np, of_clk_src_onecell_get,
+ &state->onecell_data);
+ if (err)
+ pr_err("failed to add DT provider: %d\n", err);
+}
+CLK_OF_DECLARE(clk_boston, "img,boston-clock", clk_boston_setup);
Add a driver for the clocks provided by the MIPS Boston board from Imagination Technologies. 2 clocks are provided - the system clock & the CPU clock - and each is a simple fixed rate clock whose frequency can be determined by reading a register provided by the board. Signed-off-by: Paul Burton <paul.burton@imgtec.com> --- Changes in v2: - Support BOSTON_CLK_INPUT. - Register clocks with clk_register_fixed_rate during boot, removing need for clk_ops. - s/uint32_t/u32/. - Move driver to a vendor directory. drivers/clk/Kconfig | 1 + drivers/clk/Makefile | 1 + drivers/clk/imgtec/Kconfig | 10 ++++ drivers/clk/imgtec/Makefile | 1 + drivers/clk/imgtec/clk-boston.c | 101 ++++++++++++++++++++++++++++++++++++++++ 5 files changed, 114 insertions(+) create mode 100644 drivers/clk/imgtec/Kconfig create mode 100644 drivers/clk/imgtec/Makefile create mode 100644 drivers/clk/imgtec/clk-boston.c