diff mbox

[5/5] ARM: dts: sun8i-a83t: Add CCU device nodes

Message ID 20170214033526.16977-6-wens@csie.org (mailing list archive)
State Superseded
Headers show

Commit Message

Chen-Yu Tsai Feb. 14, 2017, 3:35 a.m. UTC 
Now that we have support for the A83T CCU, add a device node for it,
and replace any existing placeholder clock phandles with the correct
ones.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
 arch/arm/boot/dts/sun8i-a83t.dtsi | 18 ++++++++++++++++--
 1 file changed, 16 insertions(+), 2 deletions(-)
diff mbox

Patch

diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi
index 79eaa7139f43..b78c831e8294 100644
--- a/arch/arm/boot/dts/sun8i-a83t.dtsi
+++ b/arch/arm/boot/dts/sun8i-a83t.dtsi
@@ -47,7 +47,9 @@ 
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 
+#include <dt-bindings/clock/sun8i-a83t-ccu.h>
 #include <dt-bindings/pinctrl/sun4i-a10.h>
+#include <dt-bindings/reset/sun8i-a83t-ccu.h>
 
 / {
 	interrupt-parent = <&gic>;
@@ -123,6 +125,7 @@ 
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
 			clock-frequency = <24000000>;
+			clock-accuracy = <50000>;
 			clock-output-names = "osc24M";
 		};
 
@@ -154,13 +157,23 @@ 
 		#size-cells = <1>;
 		ranges;
 
+		ccu: clock@01c20000 {
+			compatible = "allwinner,sun8i-a83t-ccu";
+			reg = <0x01c20000 0x400>;
+			clocks = <&osc24M>, <&osc16Md512>;
+			clock-names = "hosc", "losc";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
 		pio: pinctrl@01c20800 {
 			compatible = "allwinner,sun8i-a83t-pinctrl";
 			interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
 			reg = <0x01c20800 0x400>;
-			clocks = <&osc24M>;
+			clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&osc16Md512>;
+			clock-names = "apb", "hosc", "losc";
 			gpio-controller;
 			interrupt-controller;
 			#interrupt-cells = <3>;
@@ -206,7 +219,8 @@ 
 			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
-			clocks = <&osc24M>;
+			clocks = <&ccu CLK_BUS_UART0>;
+			resets = <&ccu RST_BUS_UART0>;
 			status = "disabled";
 		};