@@ -933,6 +933,24 @@ static struct clk_gate gxbb_cts_mclk_i958 = {
},
};
+static struct clk_mux gxbb_cts_i958 = {
+ .reg = (void *)HHI_AUD_CLK_CNTL2,
+ .mask = 0x1,
+ .shift = 27,
+ .lock = &clk_lock,
+ .hw.init = &(struct clk_init_data){
+ .name = "cts_i958",
+ .ops = &clk_mux_ops,
+ .parent_names = (const char *[]){ "cts_amclk", "cts_mclk_i958" },
+ .num_parents = 2,
+ /*
+ *The parent is specific to origin of the audio data. Let the
+ * consumer choose the appropriate parent
+ */
+ .flags = CLK_SET_RATE_PARENT | CLK_SET_RATE_NO_REPARENT,
+ },
+};
+
/* Everything Else (EE) domain gates */
static MESON_GATE(gxbb_ddr, HHI_GCLK_MPEG0, 0);
static MESON_GATE(gxbb_dos, HHI_GCLK_MPEG0, 1);
@@ -1139,6 +1157,7 @@ static struct clk_hw_onecell_data gxbb_hw_onecell_data = {
[CLKID_CTS_MCLK_I958] = &gxbb_cts_mclk_i958.hw,
[CLKID_CTS_MCLK_I958_SEL] = &gxbb_cts_mclk_i958_sel.hw,
[CLKID_CTS_MCLK_I958_DIV] = &gxbb_cts_mclk_i958_div.hw,
+ [CLKID_CTS_I958] = &gxbb_cts_i958.hw,
},
.num = NR_CLKS,
};
@@ -1258,6 +1277,7 @@ static struct clk_hw_onecell_data gxl_hw_onecell_data = {
[CLKID_CTS_MCLK_I958] = &gxbb_cts_mclk_i958.hw,
[CLKID_CTS_MCLK_I958_SEL] = &gxbb_cts_mclk_i958_sel.hw,
[CLKID_CTS_MCLK_I958_DIV] = &gxbb_cts_mclk_i958_div.hw,
+ [CLKID_CTS_I958] = &gxbb_cts_i958.hw,
},
.num = NR_CLKS,
};
@@ -1382,6 +1402,7 @@ static struct clk_mux *const gxbb_clk_muxes[] = {
&gxbb_mali,
&gxbb_cts_amclk_sel,
&gxbb_cts_mclk_i958_sel,
+ &gxbb_cts_i958,
};
static struct clk_divider *const gxbb_clk_dividers[] = {
@@ -283,8 +283,9 @@
#define CLKID_CTS_MCLK_I958 110
#define CLKID_CTS_MCLK_I958_SEL 111
#define CLKID_CTS_MCLK_I958_DIV 112
+#define CLKID_CTS_I958 113
-#define NR_CLKS 113
+#define NR_CLKS 114
/* include the CLKIDs that have been made part of the stable DT binding */
#include <dt-bindings/clock/gxbb-clkc.h>
This adds the cts_i958 clock to control the clock source of the spdif output block. This mux is not explicitly mentionned in the documentation but it is critical to the spdif dai. It is used to select whether the clock source of the spdif output is cts_amclk (when data are taken from i2s buffer) or the cts_mclk_i958 (when data are taken from the spdif buffer) Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> --- drivers/clk/meson/gxbb.c | 21 +++++++++++++++++++++ drivers/clk/meson/gxbb.h | 3 ++- 2 files changed, 23 insertions(+), 1 deletion(-)