| Message ID | 20170517164354.16399-2-icenowy@aosc.io (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
On Thu, May 18, 2017 at 12:43:44AM +0800, Icenowy Zheng wrote: > -On SoCs other than the A33 and V3s, there is one more clock required: > +For the following compatibles: > + * allwinner,sun5i-a13-tcon > + * allwinner,sun6i-a31-tcon > + * allwinner,sun6i-a31s-tcon > + * allwinner,sun8i-a33-tcon > + * allwinner,sun8i-v3s-tcon > +there is one more clock and one more property required: > + - clocks: > + - 'tcon-ch0': The clock driving the TCON channel 0 > + - clock-output-names: Name of the pixel clock created > + > +For the following compatibles: > + * allwinner,sun5i-a13-tcon > + * allwinner,sun6i-a31-tcon > + * allwinner,sun6i-a31s-tcon > + * allwinner,sun8i-h3-tcon0 > +there is one more clock required: > - 'tcon-ch1': The clock driving the TCON channel 1 Putting ID's in the compatible name is usually a bad idea. What is the difference between the two? Only that the second one doesn't have a clock? That seems highly unlikely. How does it generate the pixel clock frequency? Maxime
于 2017年5月20日 GMT+08:00 上午2:02:15, Maxime Ripard <maxime.ripard@free-electrons.com> 写到: >On Thu, May 18, 2017 at 12:43:44AM +0800, Icenowy Zheng wrote: >> -On SoCs other than the A33 and V3s, there is one more clock >required: >> +For the following compatibles: >> + * allwinner,sun5i-a13-tcon >> + * allwinner,sun6i-a31-tcon >> + * allwinner,sun6i-a31s-tcon >> + * allwinner,sun8i-a33-tcon >> + * allwinner,sun8i-v3s-tcon >> +there is one more clock and one more property required: >> + - clocks: >> + - 'tcon-ch0': The clock driving the TCON channel 0 >> + - clock-output-names: Name of the pixel clock created >> + >> +For the following compatibles: >> + * allwinner,sun5i-a13-tcon >> + * allwinner,sun6i-a31-tcon >> + * allwinner,sun6i-a31s-tcon >> + * allwinner,sun8i-h3-tcon0 >> +there is one more clock required: >> - 'tcon-ch1': The clock driving the TCON channel 1 > >Putting ID's in the compatible name is usually a bad idea. What is the >difference between the two? Only that the second one doesn't have a >clock? Yes. > >That seems highly unlikely. How does it generate the pixel clock >frequency? Yes it seems impossible, but it's also the fact. There's only one CLK_TCON in H3/5, which is for TCON0. It's possible that lcd-ch1 clk is CLK_TVE, but it's still a weird situation -- Although we have a lcd-ch1 clock, we cannot touch it, otherwise the TVE will refuse to work (the TVE can only work under 216MHz). > >Maxime -- To unsubscribe from this list: send the line "unsubscribe linux-clk" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Sat, May 20, 2017 at 2:06 AM, Icenowy Zheng <icenowy@aosc.io> wrote: > > > 于 2017年5月20日 GMT+08:00 上午2:02:15, Maxime Ripard <maxime.ripard@free-electrons.com> 写到: >>On Thu, May 18, 2017 at 12:43:44AM +0800, Icenowy Zheng wrote: >>> -On SoCs other than the A33 and V3s, there is one more clock >>required: >>> +For the following compatibles: >>> + * allwinner,sun5i-a13-tcon >>> + * allwinner,sun6i-a31-tcon >>> + * allwinner,sun6i-a31s-tcon >>> + * allwinner,sun8i-a33-tcon >>> + * allwinner,sun8i-v3s-tcon >>> +there is one more clock and one more property required: >>> + - clocks: >>> + - 'tcon-ch0': The clock driving the TCON channel 0 >>> + - clock-output-names: Name of the pixel clock created >>> + >>> +For the following compatibles: >>> + * allwinner,sun5i-a13-tcon >>> + * allwinner,sun6i-a31-tcon >>> + * allwinner,sun6i-a31s-tcon >>> + * allwinner,sun8i-h3-tcon0 >>> +there is one more clock required: >>> - 'tcon-ch1': The clock driving the TCON channel 1 >> >>Putting ID's in the compatible name is usually a bad idea. What is the >>difference between the two? Only that the second one doesn't have a >>clock? > > Yes. > >> >>That seems highly unlikely. How does it generate the pixel clock >>frequency? > > Yes it seems impossible, but it's also the fact. > > There's only one CLK_TCON in H3/5, which is for TCON0. > > It's possible that lcd-ch1 clk is CLK_TVE, but it's still a weird situation -- > Although we have a lcd-ch1 clock, we cannot touch it, otherwise > the TVE will refuse to work (the TVE can only work under 216MHz). Assuming the TV encoder is like the old one, then it never had a separate module clock. Instead its timing signals are fed from the TCON. So CLK_TVE is likely the clock for TCON1 here. ChenYu -- To unsubscribe from this list: send the line "unsubscribe linux-clk" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt b/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt index 66b85a195ef2..52781943713b 100644 --- a/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt +++ b/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt @@ -21,7 +21,9 @@ The TV Encoder supports the composite and VGA output. It is one end of the pipeline. Required properties: - - compatible: value should be "allwinner,sun4i-a10-tv-encoder". + - compatible: value must be either: + * allwinner,sun4i-a10-tv-encoder + * allwinner,sun8i-h3-tv-encoder - reg: base address and size of memory-mapped region - clocks: the clocks driving the TV encoder - resets: phandle to the reset controller driving the encoder @@ -30,6 +32,13 @@ Required properties: Documentation/devicetree/bindings/media/video-interfaces.txt. The first port should be the input endpoint. +For "allwinner,sun4i-a10-tv-encoder", there is only one clock required, +and it's not named. + +For "allwinner,sun8i-h3-tv-encoder", these clocks are needed: + - 'bus': the AHB bus clock of TVE + - 'mod': the mod clock of TVE + TCON ---- @@ -41,29 +50,51 @@ Required properties: * allwinner,sun6i-a31-tcon * allwinner,sun6i-a31s-tcon * allwinner,sun8i-a33-tcon + * allwinner,sun8i-h3-tcon0 + * allwinner,sun8i-h3-tcon1 * allwinner,sun8i-v3s-tcon - reg: base address and size of memory-mapped region - interrupts: interrupt associated to this IP - clocks: phandles to the clocks feeding the TCON. Three are needed: - 'ahb': the interface clocks - - 'tcon-ch0': The clock driving the TCON channel 0 - resets: phandles to the reset controllers driving the encoder - "lcd": the reset line for the TCON channel 0 - clock-names: the clock names mentioned above - reset-names: the reset names mentioned above - - clock-output-names: Name of the pixel clock created - ports: A ports node with endpoint definitions as defined in Documentation/devicetree/bindings/media/video-interfaces.txt. The first port should be the input endpoint, the second one the output + In the situation of Display Engine 2.0 that the connection between + the mixer and the TCON can be swapped, the input should have two + endpoints. The first is the default mixer connected to the TCON, + the second the mixer which will be connected to the TCON if the + swap bit is set. + The output should have two endpoints. The first is the block connected to the TCON channel 0 (usually a panel or a bridge), the second the block connected to the TCON channel 1 (usually the TV encoder) -On SoCs other than the A33 and V3s, there is one more clock required: +For the following compatibles: + * allwinner,sun5i-a13-tcon + * allwinner,sun6i-a31-tcon + * allwinner,sun6i-a31s-tcon + * allwinner,sun8i-a33-tcon + * allwinner,sun8i-v3s-tcon +there is one more clock and one more property required: + - clocks: + - 'tcon-ch0': The clock driving the TCON channel 0 + - clock-output-names: Name of the pixel clock created + +For the following compatibles: + * allwinner,sun5i-a13-tcon + * allwinner,sun6i-a31-tcon + * allwinner,sun6i-a31s-tcon + * allwinner,sun8i-h3-tcon0 +there is one more clock required: - 'tcon-ch1': The clock driving the TCON channel 1 DRC @@ -158,6 +189,8 @@ supported. Required properties: - compatible: value must be one of: * allwinner,sun8i-v3s-de2-mixer + * allwinner,sun8i-h3-de2-mixer0 + * allwinner,sun8i-h3-de2-mixer1 - reg: base address and size of the memory-mapped region. - clocks: phandles to the clocks feeding the mixer * bus: the mixer interface clock @@ -169,6 +202,11 @@ Required properties: Documentation/devicetree/bindings/media/video-interfaces.txt. The first port should be the input endpoints, the second one the output + In the situation of Display Engine 2.0 that the connection between + the mixer and the TCON can be swapped, the output should have two + endpoints. The first is the default TCON connected to the mixer, + the second the TCON which will be connected to the mixer if the + swap bit is set. Display Engine Pipeline ----------------------- @@ -183,6 +221,7 @@ Required properties: * allwinner,sun6i-a31-display-engine * allwinner,sun6i-a31s-display-engine * allwinner,sun8i-a33-display-engine + * allwinner,sun8i-h3-display-engine * allwinner,sun8i-v3s-display-engine - allwinner,pipelines: list of phandle to the display engine
Allwinner H3 features a "DE2.0" and a TV Encoder. Add device tree bindings for the following parts: - H3 TCONs - H3 Mixers - The connection between H3 TCONs and H3 Mixers - H3 TV Encoder - H3 Display engine Signed-off-by: Icenowy Zheng <icenowy@aosc.io> --- .../bindings/display/sunxi/sun4i-drm.txt | 47 ++++++++++++++++++++-- 1 file changed, 43 insertions(+), 4 deletions(-)