Message ID | 20170709132814.2339-1-marek.vasut+renesas@gmail.com (mailing list archive) |
---|---|
State | Accepted |
Delegated to: | Stephen Boyd |
Headers | show |
On 07/09, Marek Vasut wrote: > In case the initial values of the FOD registers are not configured in > the OTP or by the bootloader, it is possible that the FOD registers > will contain zeroes. The code in vc5_fod_recalc_rate() immediately > feeds the FOD divider value obtained from the FOD registers into the > div64_u64() and if the FOD divider value is zero, triggers division > by zero exception. > > Check if the FOD divider value is zero and return the frequency of > the FOD output as 0 Hz if it is so. This prevents the division by > zero exception. > > Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> > Cc: Stephen Boyd <sboyd@codeaurora.org> > Cc: Alexey Firago <alexey_firago@mentor.com> > Cc: Michael Turquette <mturquette@baylibre.com> > Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> > Cc: linux-renesas-soc@vger.kernel.org > Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> > on Salvator-XS with the display LVDS output. > --- Applied to clk-next
diff --git a/drivers/clk/clk-versaclock5.c b/drivers/clk/clk-versaclock5.c index ea7d552a2f2b..60bf4afb51bd 100644 --- a/drivers/clk/clk-versaclock5.c +++ b/drivers/clk/clk-versaclock5.c @@ -426,6 +426,10 @@ static unsigned long vc5_fod_recalc_rate(struct clk_hw *hw, div_frc = (od_frc[0] << 22) | (od_frc[1] << 14) | (od_frc[2] << 6) | (od_frc[3] >> 2); + /* Avoid division by zero if the output is not configured. */ + if ((div_int == 0) && (div_frc == 0)) + return 0; + /* The PLL divider has 12 integer bits and 30 fractional bits */ return div64_u64((u64)f_in << 24ULL, ((u64)div_int << 24ULL) + div_frc); }