diff mbox

[v2,3/4] clk: imx: add SCCG PLL type

Message ID 20180201175412.9480-3-l.stach@pengutronix.de (mailing list archive)
State Changes Requested, archived
Headers show

Commit Message

Lucas Stach Feb. 1, 2018, 5:54 p.m. UTC
The SCCG is a new PLL type introduced on i.MX8. Add support for this.
The driver currently misses the PLL lock check, as the preliminary
documentation mentions lock configurations, but is quiet about where
to find the actual lock status signal.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
---
 drivers/clk/imx/Makefile       |   3 +-
 drivers/clk/imx/clk-sccg-pll.c | 235 +++++++++++++++++++++++++++++++++++++++++
 drivers/clk/imx/clk.h          |   9 ++
 3 files changed, 246 insertions(+), 1 deletion(-)
 create mode 100644 drivers/clk/imx/clk-sccg-pll.c

Comments

Shawn Guo Feb. 23, 2018, 8:46 a.m. UTC | #1
On Thu, Feb 01, 2018 at 06:54:11PM +0100, Lucas Stach wrote:
> The SCCG is a new PLL type introduced on i.MX8. Add support for this.
> The driver currently misses the PLL lock check, as the preliminary
> documentation mentions lock configurations, but is quiet about where
> to find the actual lock status signal.
> 
> Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
> ---
>  drivers/clk/imx/Makefile       |   3 +-
>  drivers/clk/imx/clk-sccg-pll.c | 235 +++++++++++++++++++++++++++++++++++++++++
>  drivers/clk/imx/clk.h          |   9 ++
>  3 files changed, 246 insertions(+), 1 deletion(-)
>  create mode 100644 drivers/clk/imx/clk-sccg-pll.c
> 
> diff --git a/drivers/clk/imx/Makefile b/drivers/clk/imx/Makefile
> index 9892ae63539c..bfcbd5272d12 100644
> --- a/drivers/clk/imx/Makefile
> +++ b/drivers/clk/imx/Makefile
> @@ -12,7 +12,8 @@ obj-y += \
>  	clk-pllv1.o \
>  	clk-pllv2.o \
>  	clk-pllv3.o \
> -	clk-pfd.o
> +	clk-pfd.o \
> +	clk-sccg-pll.o
>  
>  obj-$(CONFIG_SOC_IMX1)   += clk-imx1.o
>  obj-$(CONFIG_SOC_IMX21)  += clk-imx21.o
> diff --git a/drivers/clk/imx/clk-sccg-pll.c b/drivers/clk/imx/clk-sccg-pll.c
> new file mode 100644
> index 000000000000..3a79f952564b
> --- /dev/null
> +++ b/drivers/clk/imx/clk-sccg-pll.c
> @@ -0,0 +1,235 @@
> +/*
> + * Copyright 2017 NXP.
> + *
> + * The code contained herein is licensed under the GNU General Public
> + * License. You may obtain a copy of the GNU General Public License
> + * Version 2 or later at the following locations:
> + *
> + * http://www.opensource.org/licenses/gpl-license.html
> + * http://www.gnu.org/copyleft/gpl.html
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/err.h>
> +#include <linux/io.h>
> +#include <linux/slab.h>
> +
> +#include "clk.h"
> +
> +/* PLL CFGs */
> +#define PLL_CFG0	0x0
> +#define PLL_CFG1	0x4
> +#define PLL_CFG2	0x8
> +
> +#define PLL_DIVF1_SHIFT	13
> +#define PLL_DIVF2_SHIFT	7
> +#define PLL_DIVF_MASK	0x3f
> +
> +#define PLL_DIVR1_SHIFT	25
> +#define PLL_DIVR2_SHIFT	19
> +#define PLL_DIVR1_MASK	0x3
> +#define PLL_DIVR2_MASK	0x3f
> +#define PLL_REF_SHIFT	0
> +#define PLL_REF_MASK	0x3
> +
> +#define PLL_LOCK	31
> +#define PLL_PD		7
> +
> +#define OSC_25M		25000000
> +#define OSC_27M		27000000
> +
> +struct clk_sccg_pll {
> +	struct clk_hw	hw;
> +	void __iomem	*base;
> +};
> +
> +#define to_clk_sccg_pll(_hw) container_of(_hw, struct clk_sccg_pll, hw)
> +
> +static int clk_pll1_is_prepared(struct clk_hw *hw)
> +{
> +	struct clk_sccg_pll *pll = to_clk_sccg_pll(hw);
> +	u32 val;
> +
> +	val = readl_relaxed(pll->base + PLL_CFG0);
> +	return (val & (1 << PLL_PD)) ? 0 : 1;
> +}
> +
> +static unsigned long clk_pll1_recalc_rate(struct clk_hw *hw,
> +					 unsigned long parent_rate)

I found the indentation of multi-lines arguments is strange, i.e. it
always missing one space.  Please check.

> +{
> +	struct clk_sccg_pll *pll = to_clk_sccg_pll(hw);
> +	u32 val, divf;
> +
> +	val = readl_relaxed(pll->base + PLL_CFG2);
> +	divf = (val >> PLL_DIVF1_SHIFT) & PLL_DIVF_MASK;
> +
> +	return parent_rate * 2 * (divf + 1);
> +}
> +
> +static long clk_pll1_round_rate(struct clk_hw *hw, unsigned long rate,
> +			       unsigned long *prate)
> +{
> +	unsigned long parent_rate = *prate;
> +	u32 div;
> +
> +	div = rate / (parent_rate * 2);
> +
> +	return parent_rate * div * 2;
> +}
> +
> +static int clk_pll1_set_rate(struct clk_hw *hw, unsigned long rate,
> +			    unsigned long parent_rate)
> +{
> +	struct clk_sccg_pll *pll = to_clk_sccg_pll(hw);
> +	u32 val;
> +	u32 divf;
> +
> +	divf = rate / (parent_rate * 2);
> +
> +	val = readl_relaxed(pll->base + PLL_CFG2);
> +	val &= ~(PLL_DIVF_MASK << PLL_DIVF1_SHIFT);
> +	val |= (divf - 1) << PLL_DIVF1_SHIFT;
> +	writel_relaxed(val, pll->base + PLL_CFG2);
> +
> +	/* FIXME: PLL lock check */
> +
> +	return 0;
> +}
> +
> +static int clk_pll1_prepare(struct clk_hw *hw)
> +{
> +	struct clk_sccg_pll *pll = to_clk_sccg_pll(hw);
> +	u32 val;
> +
> +	val = readl_relaxed(pll->base);
> +	val &= ~(1 << PLL_PD);
> +	writel_relaxed(val, pll->base);
> +
> +	/* FIXME: PLL lock check */
> +
> +	return 0;
> +}
> +
> +static void clk_pll1_unprepare(struct clk_hw *hw)
> +{
> +	struct clk_sccg_pll *pll = to_clk_sccg_pll(hw);
> +	u32 val;
> +
> +	val = readl_relaxed(pll->base);
> +	val |= (1 << PLL_PD);

Unnecessary parentheses.

> +	writel_relaxed(val, pll->base);
> +}
> +
> +static unsigned long clk_pll2_recalc_rate(struct clk_hw *hw,
> +					 unsigned long parent_rate)
> +{
> +	struct clk_sccg_pll *pll = to_clk_sccg_pll(hw);
> +	u32 val, ref, divr1, divf1, divr2, divf2;
> +	u64 temp64;
> +
> +	val = readl_relaxed(pll->base + PLL_CFG0);
> +	switch ((val >> PLL_REF_SHIFT) & PLL_REF_MASK) {
> +	case 0:
> +		ref = OSC_25M;
> +		break;
> +	case 1:
> +		ref = OSC_27M;
> +		break;
> +	default:
> +		ref = OSC_25M;
> +		break;
> +	}
> +
> +	val = readl_relaxed(pll->base + PLL_CFG2);
> +	divr1 = (val >> PLL_DIVR1_SHIFT) & PLL_DIVR1_MASK;
> +	divr2 = (val >> PLL_DIVR2_SHIFT) & PLL_DIVR2_MASK;
> +	divf1 = (val >> PLL_DIVF1_SHIFT) & PLL_DIVF_MASK;
> +	divf2 = (val >> PLL_DIVF2_SHIFT) & PLL_DIVF_MASK;
> +
> +	temp64 = ref * 2;
> +	temp64 *= (divf1 + 1) * (divf2 + 1);
> +
> +	do_div(temp64, (divr1 + 1) * (divr2 + 1));
> +
> +	return (unsigned long)temp64;
> +}
> +
> +static long clk_pll2_round_rate(struct clk_hw *hw, unsigned long rate,
> +			       unsigned long *prate)
> +{
> +	u32 div;
> +	unsigned long parent_rate = *prate;

Can we consistently sort variables lines from the long ones to the
short?

> +
> +	div = rate / (parent_rate);

Unnecessary parentheses.

> +
> +	return parent_rate * div;
> +}
> +
> +static int clk_pll2_set_rate(struct clk_hw *hw, unsigned long rate,
> +			    unsigned long parent_rate)
> +{
> +	u32 val;
> +	u32 divf;
> +	struct clk_sccg_pll *pll = to_clk_sccg_pll(hw);
> +
> +	divf = rate / (parent_rate);

Ditto

Shawn

> +
> +	val = readl_relaxed(pll->base + PLL_CFG2);
> +	val &= ~(PLL_DIVF_MASK << PLL_DIVF2_SHIFT);
> +	val |= (divf - 1) << PLL_DIVF2_SHIFT;
> +	writel_relaxed(val, pll->base + PLL_CFG2);
> +
> +	/* FIXME: PLL lock check */
> +
> +	return 0;
> +}
> +
> +static const struct clk_ops clk_sccg_pll1_ops = {
> +	.is_prepared	= clk_pll1_is_prepared,
> +	.recalc_rate	= clk_pll1_recalc_rate,
> +	.round_rate	= clk_pll1_round_rate,
> +	.set_rate	= clk_pll1_set_rate,
> +};
> +
> +static const struct clk_ops clk_sccg_pll2_ops = {
> +	.prepare	= clk_pll1_prepare,
> +	.unprepare	= clk_pll1_unprepare,
> +	.recalc_rate	= clk_pll2_recalc_rate,
> +	.round_rate	= clk_pll2_round_rate,
> +	.set_rate	= clk_pll2_set_rate,
> +};
> +
> +struct clk *imx_clk_sccg_pll(const char *name, const char *parent_name,
> +			     void __iomem *base, enum imx_sccg_pll_type pll_type)
> +{
> +	struct clk_sccg_pll *pll;
> +	struct clk *clk;
> +	struct clk_init_data init;
> +
> +	pll = kzalloc(sizeof(*pll), GFP_KERNEL);
> +	if (!pll)
> +		return ERR_PTR(-ENOMEM);
> +
> +	pll->base = base;
> +	init.name = name;
> +	switch (pll_type) {
> +	case SCCG_PLL1:
> +		init.ops = &clk_sccg_pll1_ops;
> +		break;
> +	case SCCG_PLL2:
> +		init.ops = &clk_sccg_pll2_ops;
> +		break;
> +	}
> +
> +	init.flags = 0;
> +	init.parent_names = &parent_name;
> +	init.num_parents = 1;
> +
> +	pll->hw.init = &init;
> +
> +	clk = clk_register(NULL, &pll->hw);
> +	if (IS_ERR(clk))
> +		kfree(pll);
> +
> +	return clk;
> +}
> diff --git a/drivers/clk/imx/clk.h b/drivers/clk/imx/clk.h
> index 287610902ea8..809509758e24 100644
> --- a/drivers/clk/imx/clk.h
> +++ b/drivers/clk/imx/clk.h
> @@ -21,6 +21,11 @@ enum imx_pllv1_type {
>  	IMX_PLLV1_IMX35,
>  };
>  
> +enum imx_sccg_pll_type {
> +	SCCG_PLL1,
> +	SCCG_PLL2,
> +};
> +
>  struct clk *imx_clk_pllv1(enum imx_pllv1_type type, const char *name,
>  		const char *parent, void __iomem *base);
>  
> @@ -30,6 +35,10 @@ struct clk *imx_clk_pllv2(const char *name, const char *parent,
>  struct clk *imx_clk_frac_pll(const char *name, const char *parent_name,
>  			     void __iomem *base);
>  
> +struct clk *imx_clk_sccg_pll(const char *name, const char *parent_name,
> +			     void __iomem *base,
> +			     enum imx_sccg_pll_type pll_type);
> +
>  enum imx_pllv3_type {
>  	IMX_PLLV3_GENERIC,
>  	IMX_PLLV3_SYS,
> -- 
> 2.15.1
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-clk" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Dong Aisheng Feb. 28, 2018, 12:03 p.m. UTC | #2
On Thu, Feb 01, 2018 at 06:54:11PM +0100, Lucas Stach wrote:
> The SCCG is a new PLL type introduced on i.MX8. Add support for this.
> The driver currently misses the PLL lock check, as the preliminary
> documentation mentions lock configurations, but is quiet about where
> to find the actual lock status signal.
> 

Why? Can't use PLL_LOCK bit?

BTW, i think the comments should mention that it breaks down
the SSCG PLL into two PLLS part with a few extra dividers.

The easiest way for user may compose them into one. But as this PLL indeed
is much complicated, i'm ok to divide them tempoparily at this stage.

> Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
> ---
>  drivers/clk/imx/Makefile       |   3 +-
>  drivers/clk/imx/clk-sccg-pll.c | 235 +++++++++++++++++++++++++++++++++++++++++
>  drivers/clk/imx/clk.h          |   9 ++
>  3 files changed, 246 insertions(+), 1 deletion(-)
>  create mode 100644 drivers/clk/imx/clk-sccg-pll.c
> 
> diff --git a/drivers/clk/imx/Makefile b/drivers/clk/imx/Makefile
> index 9892ae63539c..bfcbd5272d12 100644
> --- a/drivers/clk/imx/Makefile
> +++ b/drivers/clk/imx/Makefile
> @@ -12,7 +12,8 @@ obj-y += \
>  	clk-pllv1.o \
>  	clk-pllv2.o \
>  	clk-pllv3.o \
> -	clk-pfd.o
> +	clk-pfd.o \
> +	clk-sccg-pll.o
>  
>  obj-$(CONFIG_SOC_IMX1)   += clk-imx1.o
>  obj-$(CONFIG_SOC_IMX21)  += clk-imx21.o
> diff --git a/drivers/clk/imx/clk-sccg-pll.c b/drivers/clk/imx/clk-sccg-pll.c
> new file mode 100644
> index 000000000000..3a79f952564b
> --- /dev/null
> +++ b/drivers/clk/imx/clk-sccg-pll.c
> @@ -0,0 +1,235 @@
> +/*
> + * Copyright 2017 NXP.
> + *
> + * The code contained herein is licensed under the GNU General Public
> + * License. You may obtain a copy of the GNU General Public License
> + * Version 2 or later at the following locations:
> + *
> + * http://www.opensource.org/licenses/gpl-license.html
> + * http://www.gnu.org/copyleft/gpl.html
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/err.h>
> +#include <linux/io.h>
> +#include <linux/slab.h>
> +
> +#include "clk.h"
> +
> +/* PLL CFGs */
> +#define PLL_CFG0	0x0
> +#define PLL_CFG1	0x4
> +#define PLL_CFG2	0x8
> +
> +#define PLL_DIVF1_SHIFT	13
> +#define PLL_DIVF2_SHIFT	7
> +#define PLL_DIVF_MASK	0x3f
> +
> +#define PLL_DIVR1_SHIFT	25
> +#define PLL_DIVR2_SHIFT	19
> +#define PLL_DIVR1_MASK	0x3
> +#define PLL_DIVR2_MASK	0x3f
> +#define PLL_REF_SHIFT	0
> +#define PLL_REF_MASK	0x3
> +
> +#define PLL_LOCK	31
> +#define PLL_PD		7
> +
> +#define OSC_25M		25000000
> +#define OSC_27M		27000000
> +
> +struct clk_sccg_pll {
> +	struct clk_hw	hw;
> +	void __iomem	*base;
> +};
> +
> +#define to_clk_sccg_pll(_hw) container_of(_hw, struct clk_sccg_pll, hw)
> +
> +static int clk_pll1_is_prepared(struct clk_hw *hw)
> +{
> +	struct clk_sccg_pll *pll = to_clk_sccg_pll(hw);
> +	u32 val;
> +
> +	val = readl_relaxed(pll->base + PLL_CFG0);
> +	return (val & (1 << PLL_PD)) ? 0 : 1;

BM_PLL_PD	BIT(7)

> +}
> +
> +static unsigned long clk_pll1_recalc_rate(struct clk_hw *hw,
> +					 unsigned long parent_rate)
> +{
> +	struct clk_sccg_pll *pll = to_clk_sccg_pll(hw);
> +	u32 val, divf;
> +
> +	val = readl_relaxed(pll->base + PLL_CFG2);
> +	divf = (val >> PLL_DIVF1_SHIFT) & PLL_DIVF_MASK;
> +
> +	return parent_rate * 2 * (divf + 1);
> +}
> +
> +static long clk_pll1_round_rate(struct clk_hw *hw, unsigned long rate,
> +			       unsigned long *prate)
> +{
> +	unsigned long parent_rate = *prate;
> +	u32 div;
> +
> +	div = rate / (parent_rate * 2);
> +
> +	return parent_rate * div * 2;
> +}
> +
> +static int clk_pll1_set_rate(struct clk_hw *hw, unsigned long rate,
> +			    unsigned long parent_rate)
> +{
> +	struct clk_sccg_pll *pll = to_clk_sccg_pll(hw);
> +	u32 val;
> +	u32 divf;
> +
> +	divf = rate / (parent_rate * 2);
> +
> +	val = readl_relaxed(pll->base + PLL_CFG2);
> +	val &= ~(PLL_DIVF_MASK << PLL_DIVF1_SHIFT);
> +	val |= (divf - 1) << PLL_DIVF1_SHIFT;
> +	writel_relaxed(val, pll->base + PLL_CFG2);
> +
> +	/* FIXME: PLL lock check */
> +
> +	return 0;
> +}
> +
> +static int clk_pll1_prepare(struct clk_hw *hw)
> +{
> +	struct clk_sccg_pll *pll = to_clk_sccg_pll(hw);
> +	u32 val;
> +
> +	val = readl_relaxed(pll->base);
> +	val &= ~(1 << PLL_PD);
> +	writel_relaxed(val, pll->base);
> +
> +	/* FIXME: PLL lock check */
> +
> +	return 0;
> +}
> +
> +static void clk_pll1_unprepare(struct clk_hw *hw)
> +{
> +	struct clk_sccg_pll *pll = to_clk_sccg_pll(hw);
> +	u32 val;
> +
> +	val = readl_relaxed(pll->base);
> +	val |= (1 << PLL_PD);
> +	writel_relaxed(val, pll->base);
> +}
> +
> +static unsigned long clk_pll2_recalc_rate(struct clk_hw *hw,
> +					 unsigned long parent_rate)
> +{
> +	struct clk_sccg_pll *pll = to_clk_sccg_pll(hw);
> +	u32 val, ref, divr1, divf1, divr2, divf2;
> +	u64 temp64;
> +
> +	val = readl_relaxed(pll->base + PLL_CFG0);
> +	switch ((val >> PLL_REF_SHIFT) & PLL_REF_MASK) {
> +	case 0:
> +		ref = OSC_25M;
> +		break;
> +	case 1:
> +		ref = OSC_27M;
> +		break;
> +	default:
> +		ref = OSC_25M;
> +		break;
> +	}
> +
> +	val = readl_relaxed(pll->base + PLL_CFG2);
> +	divr1 = (val >> PLL_DIVR1_SHIFT) & PLL_DIVR1_MASK;
> +	divr2 = (val >> PLL_DIVR2_SHIFT) & PLL_DIVR2_MASK;
> +	divf1 = (val >> PLL_DIVF1_SHIFT) & PLL_DIVF_MASK;
> +	divf2 = (val >> PLL_DIVF2_SHIFT) & PLL_DIVF_MASK;
> +
> +	temp64 = ref * 2;
> +	temp64 *= (divf1 + 1) * (divf2 + 1);
> +
> +	do_div(temp64, (divr1 + 1) * (divr2 + 1));
> +

Here it looks strange to me.

We break down the SSCG PLL into two parts. But here we manually
calculate the PLL rate from HW register value instead of referring to
the parent_rate. Seems like a layer violation.

Any strong reason to do this?

> +	return (unsigned long)temp64;
> +}
> +
> +static long clk_pll2_round_rate(struct clk_hw *hw, unsigned long rate,
> +			       unsigned long *prate)
> +{
> +	u32 div;
> +	unsigned long parent_rate = *prate;
> +
> +	div = rate / (parent_rate);
> +
> +	return parent_rate * div;
> +}
> +
> +static int clk_pll2_set_rate(struct clk_hw *hw, unsigned long rate,
> +			    unsigned long parent_rate)
> +{
> +	u32 val;
> +	u32 divf;
> +	struct clk_sccg_pll *pll = to_clk_sccg_pll(hw);
> +
> +	divf = rate / (parent_rate);
> +
> +	val = readl_relaxed(pll->base + PLL_CFG2);
> +	val &= ~(PLL_DIVF_MASK << PLL_DIVF2_SHIFT);
> +	val |= (divf - 1) << PLL_DIVF2_SHIFT;
> +	writel_relaxed(val, pll->base + PLL_CFG2);

I wonder pretending the PLL2 as a simple divider (only mult divf2)
may break the fractional divider capability.
Probably we shouldn't create another divider behind pll2.
e.g. sys1_pll2_div

> +
> +	/* FIXME: PLL lock check */
> +

check PLL_LOCK here

> +	return 0;
> +}
> +
> +static const struct clk_ops clk_sccg_pll1_ops = {
> +	.is_prepared	= clk_pll1_is_prepared,

Should this belong to pll2?

> +	.recalc_rate	= clk_pll1_recalc_rate,
> +	.round_rate	= clk_pll1_round_rate,
> +	.set_rate	= clk_pll1_set_rate,
> +};
> +
> +static const struct clk_ops clk_sccg_pll2_ops = {
> +	.prepare	= clk_pll1_prepare,
> +	.unprepare	= clk_pll1_unprepare,
> +	.recalc_rate	= clk_pll2_recalc_rate,
> +	.round_rate	= clk_pll2_round_rate,
> +	.set_rate	= clk_pll2_set_rate,
> +};
> +
> +struct clk *imx_clk_sccg_pll(const char *name, const char *parent_name,
> +			     void __iomem *base, enum imx_sccg_pll_type pll_type)
> +{
> +	struct clk_sccg_pll *pll;
> +	struct clk *clk;
> +	struct clk_init_data init;
> +
> +	pll = kzalloc(sizeof(*pll), GFP_KERNEL);
> +	if (!pll)
> +		return ERR_PTR(-ENOMEM);
> +
> +	pll->base = base;
> +	init.name = name;
> +	switch (pll_type) {
> +	case SCCG_PLL1:
> +		init.ops = &clk_sccg_pll1_ops;
> +		break;
> +	case SCCG_PLL2:
> +		init.ops = &clk_sccg_pll2_ops;
> +		break;

No default?

> +	}
> +
> +	init.flags = 0;

Should't assign CLK_SET_RATE_PARENT?

> +	init.parent_names = &parent_name;
> +	init.num_parents = 1;
> +
> +	pll->hw.init = &init;
> +
> +	clk = clk_register(NULL, &pll->hw);
> +	if (IS_ERR(clk))
> +		kfree(pll);
> +
> +	return clk;
> +}
> diff --git a/drivers/clk/imx/clk.h b/drivers/clk/imx/clk.h
> index 287610902ea8..809509758e24 100644
> --- a/drivers/clk/imx/clk.h
> +++ b/drivers/clk/imx/clk.h
> @@ -21,6 +21,11 @@ enum imx_pllv1_type {
>  	IMX_PLLV1_IMX35,
>  };
>  
> +enum imx_sccg_pll_type {
> +	SCCG_PLL1,
> +	SCCG_PLL2,
> +};
> +
>  struct clk *imx_clk_pllv1(enum imx_pllv1_type type, const char *name,
>  		const char *parent, void __iomem *base);
>  
> @@ -30,6 +35,10 @@ struct clk *imx_clk_pllv2(const char *name, const char *parent,
>  struct clk *imx_clk_frac_pll(const char *name, const char *parent_name,
>  			     void __iomem *base);
>  
> +struct clk *imx_clk_sccg_pll(const char *name, const char *parent_name,
> +			     void __iomem *base,
> +			     enum imx_sccg_pll_type pll_type);
> +
>  enum imx_pllv3_type {
>  	IMX_PLLV3_GENERIC,
>  	IMX_PLLV3_SYS,

Last, overally, i did not see the configuration of SSE bit
as it changes the formula.
SSE=0: PLLOUT = REF/DIVR1 * 2 * DIVF1/DIVR2 * DIVF2/DIVQ
SSE=1: PLLOUT = REF/DIVR1 * 8 * DIVF1/DIVR2 * DIVF2/DIVQ

Are we replying on the default register value?

Regards
Dong Aisheng

> -- 
> 2.15.1
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-clk" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-clk" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/clk/imx/Makefile b/drivers/clk/imx/Makefile
index 9892ae63539c..bfcbd5272d12 100644
--- a/drivers/clk/imx/Makefile
+++ b/drivers/clk/imx/Makefile
@@ -12,7 +12,8 @@  obj-y += \
 	clk-pllv1.o \
 	clk-pllv2.o \
 	clk-pllv3.o \
-	clk-pfd.o
+	clk-pfd.o \
+	clk-sccg-pll.o
 
 obj-$(CONFIG_SOC_IMX1)   += clk-imx1.o
 obj-$(CONFIG_SOC_IMX21)  += clk-imx21.o
diff --git a/drivers/clk/imx/clk-sccg-pll.c b/drivers/clk/imx/clk-sccg-pll.c
new file mode 100644
index 000000000000..3a79f952564b
--- /dev/null
+++ b/drivers/clk/imx/clk-sccg-pll.c
@@ -0,0 +1,235 @@ 
+/*
+ * Copyright 2017 NXP.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+
+#include "clk.h"
+
+/* PLL CFGs */
+#define PLL_CFG0	0x0
+#define PLL_CFG1	0x4
+#define PLL_CFG2	0x8
+
+#define PLL_DIVF1_SHIFT	13
+#define PLL_DIVF2_SHIFT	7
+#define PLL_DIVF_MASK	0x3f
+
+#define PLL_DIVR1_SHIFT	25
+#define PLL_DIVR2_SHIFT	19
+#define PLL_DIVR1_MASK	0x3
+#define PLL_DIVR2_MASK	0x3f
+#define PLL_REF_SHIFT	0
+#define PLL_REF_MASK	0x3
+
+#define PLL_LOCK	31
+#define PLL_PD		7
+
+#define OSC_25M		25000000
+#define OSC_27M		27000000
+
+struct clk_sccg_pll {
+	struct clk_hw	hw;
+	void __iomem	*base;
+};
+
+#define to_clk_sccg_pll(_hw) container_of(_hw, struct clk_sccg_pll, hw)
+
+static int clk_pll1_is_prepared(struct clk_hw *hw)
+{
+	struct clk_sccg_pll *pll = to_clk_sccg_pll(hw);
+	u32 val;
+
+	val = readl_relaxed(pll->base + PLL_CFG0);
+	return (val & (1 << PLL_PD)) ? 0 : 1;
+}
+
+static unsigned long clk_pll1_recalc_rate(struct clk_hw *hw,
+					 unsigned long parent_rate)
+{
+	struct clk_sccg_pll *pll = to_clk_sccg_pll(hw);
+	u32 val, divf;
+
+	val = readl_relaxed(pll->base + PLL_CFG2);
+	divf = (val >> PLL_DIVF1_SHIFT) & PLL_DIVF_MASK;
+
+	return parent_rate * 2 * (divf + 1);
+}
+
+static long clk_pll1_round_rate(struct clk_hw *hw, unsigned long rate,
+			       unsigned long *prate)
+{
+	unsigned long parent_rate = *prate;
+	u32 div;
+
+	div = rate / (parent_rate * 2);
+
+	return parent_rate * div * 2;
+}
+
+static int clk_pll1_set_rate(struct clk_hw *hw, unsigned long rate,
+			    unsigned long parent_rate)
+{
+	struct clk_sccg_pll *pll = to_clk_sccg_pll(hw);
+	u32 val;
+	u32 divf;
+
+	divf = rate / (parent_rate * 2);
+
+	val = readl_relaxed(pll->base + PLL_CFG2);
+	val &= ~(PLL_DIVF_MASK << PLL_DIVF1_SHIFT);
+	val |= (divf - 1) << PLL_DIVF1_SHIFT;
+	writel_relaxed(val, pll->base + PLL_CFG2);
+
+	/* FIXME: PLL lock check */
+
+	return 0;
+}
+
+static int clk_pll1_prepare(struct clk_hw *hw)
+{
+	struct clk_sccg_pll *pll = to_clk_sccg_pll(hw);
+	u32 val;
+
+	val = readl_relaxed(pll->base);
+	val &= ~(1 << PLL_PD);
+	writel_relaxed(val, pll->base);
+
+	/* FIXME: PLL lock check */
+
+	return 0;
+}
+
+static void clk_pll1_unprepare(struct clk_hw *hw)
+{
+	struct clk_sccg_pll *pll = to_clk_sccg_pll(hw);
+	u32 val;
+
+	val = readl_relaxed(pll->base);
+	val |= (1 << PLL_PD);
+	writel_relaxed(val, pll->base);
+}
+
+static unsigned long clk_pll2_recalc_rate(struct clk_hw *hw,
+					 unsigned long parent_rate)
+{
+	struct clk_sccg_pll *pll = to_clk_sccg_pll(hw);
+	u32 val, ref, divr1, divf1, divr2, divf2;
+	u64 temp64;
+
+	val = readl_relaxed(pll->base + PLL_CFG0);
+	switch ((val >> PLL_REF_SHIFT) & PLL_REF_MASK) {
+	case 0:
+		ref = OSC_25M;
+		break;
+	case 1:
+		ref = OSC_27M;
+		break;
+	default:
+		ref = OSC_25M;
+		break;
+	}
+
+	val = readl_relaxed(pll->base + PLL_CFG2);
+	divr1 = (val >> PLL_DIVR1_SHIFT) & PLL_DIVR1_MASK;
+	divr2 = (val >> PLL_DIVR2_SHIFT) & PLL_DIVR2_MASK;
+	divf1 = (val >> PLL_DIVF1_SHIFT) & PLL_DIVF_MASK;
+	divf2 = (val >> PLL_DIVF2_SHIFT) & PLL_DIVF_MASK;
+
+	temp64 = ref * 2;
+	temp64 *= (divf1 + 1) * (divf2 + 1);
+
+	do_div(temp64, (divr1 + 1) * (divr2 + 1));
+
+	return (unsigned long)temp64;
+}
+
+static long clk_pll2_round_rate(struct clk_hw *hw, unsigned long rate,
+			       unsigned long *prate)
+{
+	u32 div;
+	unsigned long parent_rate = *prate;
+
+	div = rate / (parent_rate);
+
+	return parent_rate * div;
+}
+
+static int clk_pll2_set_rate(struct clk_hw *hw, unsigned long rate,
+			    unsigned long parent_rate)
+{
+	u32 val;
+	u32 divf;
+	struct clk_sccg_pll *pll = to_clk_sccg_pll(hw);
+
+	divf = rate / (parent_rate);
+
+	val = readl_relaxed(pll->base + PLL_CFG2);
+	val &= ~(PLL_DIVF_MASK << PLL_DIVF2_SHIFT);
+	val |= (divf - 1) << PLL_DIVF2_SHIFT;
+	writel_relaxed(val, pll->base + PLL_CFG2);
+
+	/* FIXME: PLL lock check */
+
+	return 0;
+}
+
+static const struct clk_ops clk_sccg_pll1_ops = {
+	.is_prepared	= clk_pll1_is_prepared,
+	.recalc_rate	= clk_pll1_recalc_rate,
+	.round_rate	= clk_pll1_round_rate,
+	.set_rate	= clk_pll1_set_rate,
+};
+
+static const struct clk_ops clk_sccg_pll2_ops = {
+	.prepare	= clk_pll1_prepare,
+	.unprepare	= clk_pll1_unprepare,
+	.recalc_rate	= clk_pll2_recalc_rate,
+	.round_rate	= clk_pll2_round_rate,
+	.set_rate	= clk_pll2_set_rate,
+};
+
+struct clk *imx_clk_sccg_pll(const char *name, const char *parent_name,
+			     void __iomem *base, enum imx_sccg_pll_type pll_type)
+{
+	struct clk_sccg_pll *pll;
+	struct clk *clk;
+	struct clk_init_data init;
+
+	pll = kzalloc(sizeof(*pll), GFP_KERNEL);
+	if (!pll)
+		return ERR_PTR(-ENOMEM);
+
+	pll->base = base;
+	init.name = name;
+	switch (pll_type) {
+	case SCCG_PLL1:
+		init.ops = &clk_sccg_pll1_ops;
+		break;
+	case SCCG_PLL2:
+		init.ops = &clk_sccg_pll2_ops;
+		break;
+	}
+
+	init.flags = 0;
+	init.parent_names = &parent_name;
+	init.num_parents = 1;
+
+	pll->hw.init = &init;
+
+	clk = clk_register(NULL, &pll->hw);
+	if (IS_ERR(clk))
+		kfree(pll);
+
+	return clk;
+}
diff --git a/drivers/clk/imx/clk.h b/drivers/clk/imx/clk.h
index 287610902ea8..809509758e24 100644
--- a/drivers/clk/imx/clk.h
+++ b/drivers/clk/imx/clk.h
@@ -21,6 +21,11 @@  enum imx_pllv1_type {
 	IMX_PLLV1_IMX35,
 };
 
+enum imx_sccg_pll_type {
+	SCCG_PLL1,
+	SCCG_PLL2,
+};
+
 struct clk *imx_clk_pllv1(enum imx_pllv1_type type, const char *name,
 		const char *parent, void __iomem *base);
 
@@ -30,6 +35,10 @@  struct clk *imx_clk_pllv2(const char *name, const char *parent,
 struct clk *imx_clk_frac_pll(const char *name, const char *parent_name,
 			     void __iomem *base);
 
+struct clk *imx_clk_sccg_pll(const char *name, const char *parent_name,
+			     void __iomem *base,
+			     enum imx_sccg_pll_type pll_type);
+
 enum imx_pllv3_type {
 	IMX_PLLV3_GENERIC,
 	IMX_PLLV3_SYS,