| Message ID | 20180524060114.GJ4249@localhost.localdomain (mailing list archive) |
|---|---|
| State | Not Applicable, archived |
| Headers | show |
On Thu, May 24, 2018 at 09:01:14AM +0300, Matti Vaittinen wrote: > Configurations and Makefile for BD71837 regulator driver > > Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> > --- > drivers/regulator/Kconfig | 11 +++++++++++ > drivers/regulator/Makefile | 1 + > 2 files changed, 12 insertions(+) Just squash this into the single patch adding the driver, it makes life easier.
> On Thu, May 24, 2018 at 09:01:14AM +0300, Matti Vaittinen wrote: > > Configurations and Makefile for BD71837 regulator driver > > > > Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> > > --- > > drivers/regulator/Kconfig | 11 +++++++++++ > > drivers/regulator/Makefile | 1 + > > 2 files changed, 12 insertions(+) > > Just squash this into the single patch adding the driver, it makes life > easier. Will do. I was wondering if it is nicer to have smaller patches and thus decided to split this but if it is easier to read them in one patch - no problem. Br, Matti Vaittinen-- To unsubscribe from this list: send the line "unsubscribe linux-clk" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Matti,
Thank you for the patch! Perhaps something to improve:
[auto build test WARNING on ljones-mfd/for-mfd-next]
[also build test WARNING on v4.17-rc6]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]
url: https://github.com/0day-ci/linux/commits/Matti-Vaittinen/mfd-regulator-clk-bd71837-ROHM-BD71837-PMIC-driver/20180526-192351
base: https://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd.git for-mfd-next
reproduce:
# apt-get install sparse
make ARCH=x86_64 allmodconfig
make C=1 CF=-D__CHECK_ENDIAN__
Please review and possibly fold the followup patch.
---
0-DAY kernel test infrastructure Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all Intel Corporation
--
To unsubscribe from this list: send the line "unsubscribe linux-clk" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index 097f61784a7d..139f4b53fea0 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -180,6 +180,17 @@ config REGULATOR_BCM590XX BCM590xx PMUs. This will enable support for the software controllable LDO/Switching regulators. +config REGULATOR_BD71837 + tristate "ROHM BD71837 Power Regulator" + depends on MFD_BD71837 + help + This driver supports voltage regulators on ROHM BD71837 PMIC. + This will enable support for the software controllable buck + and LDO regulators. + + This driver can also be built as a module. If so, the module + will be called bd71837-regulator. + config REGULATOR_BD9571MWV tristate "ROHM BD9571MWV Regulators" depends on MFD_BD9571MWV diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index 590674fbecd7..1b4d8ec416c2 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -27,6 +27,7 @@ obj-$(CONFIG_REGULATOR_AS3711) += as3711-regulator.o obj-$(CONFIG_REGULATOR_AS3722) += as3722-regulator.o obj-$(CONFIG_REGULATOR_AXP20X) += axp20x-regulator.o obj-$(CONFIG_REGULATOR_BCM590XX) += bcm590xx-regulator.o +obj-$(CONFIG_REGULATOR_BD71837) += bd71837-regulator.o obj-$(CONFIG_REGULATOR_BD9571MWV) += bd9571mwv-regulator.o obj-$(CONFIG_REGULATOR_DA903X) += da903x.o obj-$(CONFIG_REGULATOR_DA9052) += da9052-regulator.o
Configurations and Makefile for BD71837 regulator driver Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> --- drivers/regulator/Kconfig | 11 +++++++++++ drivers/regulator/Makefile | 1 + 2 files changed, 12 insertions(+)