diff mbox

[v2,01/27] clk: sunxi-ng: r40: Add minimal rate for video PLLs

Message ID 20180612200036.21483-2-jernej.skrabec@siol.net (mailing list archive)
State Awaiting Upstream
Headers show

Commit Message

Jernej Škrabec June 12, 2018, 8 p.m. UTC
According to documentation and experience with other similar SoCs, video
PLLs don't work stable if their output frequency is set below 192 MHz.

Because of that, set minimal rate to both R40 video PLLs to 192 MHz.

Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
---
 drivers/clk/sunxi-ng/ccu-sun8i-r40.c | 46 +++++++++++++++-------------
 1 file changed, 24 insertions(+), 22 deletions(-)

Comments

Chen-Yu Tsai June 13, 2018, 3:18 a.m. UTC | #1
On Wed, Jun 13, 2018 at 4:00 AM, Jernej Skrabec <jernej.skrabec@siol.net> wrote:
> According to documentation and experience with other similar SoCs, video
> PLLs don't work stable if their output frequency is set below 192 MHz.
>
> Because of that, set minimal rate to both R40 video PLLs to 192 MHz.
>
> Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>

Reviewed-by: Chen-Yu Tsai <wens@csie.org>
--
To unsubscribe from this list: send the line "unsubscribe linux-clk" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/clk/sunxi-ng/ccu-sun8i-r40.c b/drivers/clk/sunxi-ng/ccu-sun8i-r40.c
index 933f2e68f42a..c16a62a7bdbd 100644
--- a/drivers/clk/sunxi-ng/ccu-sun8i-r40.c
+++ b/drivers/clk/sunxi-ng/ccu-sun8i-r40.c
@@ -65,17 +65,18 @@  static SUNXI_CCU_NM_WITH_GATE_LOCK(pll_audio_base_clk, "pll-audio-base",
 				   CLK_SET_RATE_UNGATE);
 
 /* TODO: The result of N/M is required to be in [8, 25] range. */
-static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_video0_clk, "pll-video0",
-					"osc24M", 0x0010,
-					8, 7,		/* N */
-					0, 4,		/* M */
-					BIT(24),	/* frac enable */
-					BIT(25),	/* frac select */
-					270000000,	/* frac rate 0 */
-					297000000,	/* frac rate 1 */
-					BIT(31),	/* gate */
-					BIT(28),	/* lock */
-					CLK_SET_RATE_UNGATE);
+static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK_MIN(pll_video0_clk, "pll-video0",
+					    "osc24M", 0x0010,
+					    192000000,	/* Minimum rate */
+					    8, 7,	/* N */
+					    0, 4,	/* M */
+					    BIT(24),	/* frac enable */
+					    BIT(25),	/* frac select */
+					    270000000,	/* frac rate 0 */
+					    297000000,	/* frac rate 1 */
+					    BIT(31),	/* gate */
+					    BIT(28),	/* lock */
+					    CLK_SET_RATE_UNGATE);
 
 /* TODO: The result of N/M is required to be in [8, 25] range. */
 static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_ve_clk, "pll-ve",
@@ -151,17 +152,18 @@  static struct ccu_nk pll_periph1_clk = {
 };
 
 /* TODO: The result of N/M is required to be in [8, 25] range. */
-static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_video1_clk, "pll-video1",
-					"osc24M", 0x030,
-					8, 7,		/* N */
-					0, 4,		/* M */
-					BIT(24),	/* frac enable */
-					BIT(25),	/* frac select */
-					270000000,	/* frac rate 0 */
-					297000000,	/* frac rate 1 */
-					BIT(31),	/* gate */
-					BIT(28),	/* lock */
-					CLK_SET_RATE_UNGATE);
+static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK_MIN(pll_video1_clk, "pll-video1",
+					    "osc24M", 0x030,
+					    192000000,	/* Minimum rate */
+					    8, 7,	/* N */
+					    0, 4,	/* M */
+					    BIT(24),	/* frac enable */
+					    BIT(25),	/* frac select */
+					    270000000,	/* frac rate 0 */
+					    297000000,	/* frac rate 1 */
+					    BIT(31),	/* gate */
+					    BIT(28),	/* lock */
+					    CLK_SET_RATE_UNGATE);
 
 static struct ccu_nkm pll_sata_clk = {
 	.enable		= BIT(31),