[v13,1/8] soc: qcom: Separate kryo l2 accessors from PMU driver

Message ID	20180614215358.11264-2-ilia.lin@gmail.com (mailing list archive)
State	Awaiting Upstream, archived
Headers	show Return-Path: <linux-clk-owner@kernel.org> From: ilia.lin@gmail.com To: ilia.lin@gmail.com Cc: Ilia Lin <ilialin@codeaurora.org>, Michael Turquette <mturquette@baylibre.com>, Stephen Boyd <sboyd@kernel.org>, Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com>, Andy Gross <andy.gross@linaro.org>, David Brown <david.brown@linaro.org>, Will Deacon <will.deacon@arm.com>, Amit Kucheria <amit.kucheria@linaro.org>, linux-clk@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org, linux-soc@vger.kernel.org, linux-arm-kernel@lists.infradead.org Subject: [PATCH v13 1/8] soc: qcom: Separate kryo l2 accessors from PMU driver Date: Thu, 14 Jun 2018 23:53:48 +0200 Message-Id: <20180614215358.11264-2-ilia.lin@gmail.com> In-Reply-To: <20180614215358.11264-1-ilia.lin@gmail.com> References: <20180614215358.11264-1-ilia.lin@gmail.com> Sender: linux-clk-owner@vger.kernel.org Precedence: bulk

diff --git a/drivers/perf/Kconfig b/drivers/perf/Kconfig index 08ebaf7cca8b..5c3f07cd79f4 100644 --- a/drivers/perf/Kconfig +++ b/drivers/perf/Kconfig @@ -71,6 +71,7 @@ config HISI_PMU config QCOM_L2_PMU bool "Qualcomm Technologies L2-cache PMU" depends on ARCH_QCOM && ARM64 && ACPI + select QCOM_KRYO_L2_ACCESSORS help Provides support for the L2 cache performance monitor unit (PMU) in Qualcomm Technologies processors. diff --git a/drivers/perf/qcom_l2_pmu.c b/drivers/perf/qcom_l2_pmu.c index 842135cf35a3..cc31f5162942 100644 --- a/drivers/perf/qcom_l2_pmu.c +++ b/drivers/perf/qcom_l2_pmu.c @@ -31,6 +31,7 @@ #include <asm/barrier.h> #include <asm/local64.h> #include <asm/sysreg.h> +#include <soc/qcom/kryo-l2-accessors.h> #define MAX_L2_CTRS 9 @@ -87,8 +88,6 @@ #define L2_COUNTER_RELOAD BIT_ULL(31) #define L2_CYCLE_COUNTER_RELOAD BIT_ULL(63) -#define L2CPUSRSELR_EL1 sys_reg(3, 3, 15, 0, 6) -#define L2CPUSRDR_EL1 sys_reg(3, 3, 15, 0, 7) #define reg_idx(reg, i) (((i) * IA_L2_REG_OFFSET) + reg##_BASE) @@ -107,48 +106,7 @@ #define L2_EVENT_STREX 0x421 #define L2_EVENT_CLREX 0x422 -static DEFINE_RAW_SPINLOCK(l2_access_lock); -/** - * set_l2_indirect_reg: write value to an L2 register - * @reg: Address of L2 register. - * @value: Value to be written to register. - * - * Use architecturally required barriers for ordering between system register - * accesses - */ -static void set_l2_indirect_reg(u64 reg, u64 val) -{ - unsigned long flags; - - raw_spin_lock_irqsave(&l2_access_lock, flags); - write_sysreg_s(reg, L2CPUSRSELR_EL1); - isb(); - write_sysreg_s(val, L2CPUSRDR_EL1); - isb(); - raw_spin_unlock_irqrestore(&l2_access_lock, flags); -} - -/** - * get_l2_indirect_reg: read an L2 register value - * @reg: Address of L2 register. - * - * Use architecturally required barriers for ordering between system register - * accesses - */ -static u64 get_l2_indirect_reg(u64 reg) -{ - u64 val; - unsigned long flags; - - raw_spin_lock_irqsave(&l2_access_lock, flags); - write_sysreg_s(reg, L2CPUSRSELR_EL1); - isb(); - val = read_sysreg_s(L2CPUSRDR_EL1); - raw_spin_unlock_irqrestore(&l2_access_lock, flags); - - return val; -} struct cluster_pmu; @@ -219,28 +177,28 @@ static inline struct cluster_pmu *get_cluster_pmu( static void cluster_pmu_reset(void) { /* Reset all counters */ - set_l2_indirect_reg(L2PMCR, L2PMCR_RESET_ALL); - set_l2_indirect_reg(L2PMCNTENCLR, l2_counter_present_mask); - set_l2_indirect_reg(L2PMINTENCLR, l2_counter_present_mask); - set_l2_indirect_reg(L2PMOVSCLR, l2_counter_present_mask); + kryo_l2_set_indirect_reg(L2PMCR, L2PMCR_RESET_ALL); + kryo_l2_set_indirect_reg(L2PMCNTENCLR, l2_counter_present_mask); + kryo_l2_set_indirect_reg(L2PMINTENCLR, l2_counter_present_mask); + kryo_l2_set_indirect_reg(L2PMOVSCLR, l2_counter_present_mask); } static inline void cluster_pmu_enable(void) { - set_l2_indirect_reg(L2PMCR, L2PMCR_COUNTERS_ENABLE); + kryo_l2_set_indirect_reg(L2PMCR, L2PMCR_COUNTERS_ENABLE); } static inline void cluster_pmu_disable(void) { - set_l2_indirect_reg(L2PMCR, L2PMCR_COUNTERS_DISABLE); + kryo_l2_set_indirect_reg(L2PMCR, L2PMCR_COUNTERS_DISABLE); } static inline void cluster_pmu_counter_set_value(u32 idx, u64 value) { if (idx == l2_cycle_ctr_idx) - set_l2_indirect_reg(L2PMCCNTR, value); + kryo_l2_set_indirect_reg(L2PMCCNTR, value); else - set_l2_indirect_reg(reg_idx(IA_L2PMXEVCNTR, idx), value); + kryo_l2_set_indirect_reg(reg_idx(IA_L2PMXEVCNTR, idx), value); } static inline u64 cluster_pmu_counter_get_value(u32 idx) @@ -248,46 +206,46 @@ static inline u64 cluster_pmu_counter_get_value(u32 idx) u64 value; if (idx == l2_cycle_ctr_idx) - value = get_l2_indirect_reg(L2PMCCNTR); + value = kryo_l2_get_indirect_reg(L2PMCCNTR); else - value = get_l2_indirect_reg(reg_idx(IA_L2PMXEVCNTR, idx)); + value = kryo_l2_get_indirect_reg(reg_idx(IA_L2PMXEVCNTR, idx)); return value; } static inline void cluster_pmu_counter_enable(u32 idx) { - set_l2_indirect_reg(L2PMCNTENSET, idx_to_reg_bit(idx)); + kryo_l2_set_indirect_reg(L2PMCNTENSET, idx_to_reg_bit(idx)); } static inline void cluster_pmu_counter_disable(u32 idx) { - set_l2_indirect_reg(L2PMCNTENCLR, idx_to_reg_bit(idx)); + kryo_l2_set_indirect_reg(L2PMCNTENCLR, idx_to_reg_bit(idx)); } static inline void cluster_pmu_counter_enable_interrupt(u32 idx) { - set_l2_indirect_reg(L2PMINTENSET, idx_to_reg_bit(idx)); + kryo_l2_set_indirect_reg(L2PMINTENSET, idx_to_reg_bit(idx)); } static inline void cluster_pmu_counter_disable_interrupt(u32 idx) { - set_l2_indirect_reg(L2PMINTENCLR, idx_to_reg_bit(idx)); + kryo_l2_set_indirect_reg(L2PMINTENCLR, idx_to_reg_bit(idx)); } static inline void cluster_pmu_set_evccntcr(u32 val) { - set_l2_indirect_reg(L2PMCCNTCR, val); + kryo_l2_set_indirect_reg(L2PMCCNTCR, val); } static inline void cluster_pmu_set_evcntcr(u32 ctr, u32 val) { - set_l2_indirect_reg(reg_idx(IA_L2PMXEVCNTCR, ctr), val); + kryo_l2_set_indirect_reg(reg_idx(IA_L2PMXEVCNTCR, ctr), val); } static inline void cluster_pmu_set_evtyper(u32 ctr, u32 val) { - set_l2_indirect_reg(reg_idx(IA_L2PMXEVTYPER, ctr), val); + kryo_l2_set_indirect_reg(reg_idx(IA_L2PMXEVTYPER, ctr), val); } static void cluster_pmu_set_resr(struct cluster_pmu *cluster, @@ -303,11 +261,11 @@ static void cluster_pmu_set_resr(struct cluster_pmu *cluster, spin_lock_irqsave(&cluster->pmu_lock, flags); - resr_val = get_l2_indirect_reg(L2PMRESR); + resr_val = kryo_l2_get_indirect_reg(L2PMRESR); resr_val &= ~(L2PMRESR_GROUP_MASK << shift); resr_val |= field; resr_val |= L2PMRESR_EN; - set_l2_indirect_reg(L2PMRESR, resr_val); + kryo_l2_set_indirect_reg(L2PMRESR, resr_val); spin_unlock_irqrestore(&cluster->pmu_lock, flags); } @@ -323,14 +281,14 @@ static inline void cluster_pmu_set_evfilter_sys_mode(u32 ctr) L2PMXEVFILTER_ORGFILTER_IDINDEP | L2PMXEVFILTER_ORGFILTER_ALL; - set_l2_indirect_reg(reg_idx(IA_L2PMXEVFILTER, ctr), val); + kryo_l2_set_indirect_reg(reg_idx(IA_L2PMXEVFILTER, ctr), val); } static inline u32 cluster_pmu_getreset_ovsr(void) { - u32 result = get_l2_indirect_reg(L2PMOVSSET); + u32 result = kryo_l2_get_indirect_reg(L2PMOVSSET); - set_l2_indirect_reg(L2PMOVSCLR, result); + kryo_l2_set_indirect_reg(L2PMOVSCLR, result); return result; } @@ -783,7 +741,7 @@ static int get_num_counters(void) { int val; - val = get_l2_indirect_reg(L2PMCR); + val = kryo_l2_get_indirect_reg(L2PMCR); /* * Read number of counters from L2PMCR and add 1 diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig index 9dc02f390ba3..e97a9e6d4232 100644 --- a/drivers/soc/qcom/Kconfig +++ b/drivers/soc/qcom/Kconfig @@ -39,6 +39,9 @@ config QCOM_GSBI functions for connecting the underlying serial UART, SPI, and I2C devices to the output pins. +config QCOM_KRYO_L2_ACCESSORS + bool + config QCOM_MDT_LOADER tristate select QCOM_SCM diff --git a/drivers/soc/qcom/Makefile b/drivers/soc/qcom/Makefile index 19dcf957cb3a..18545b1dd161 100644 --- a/drivers/soc/qcom/Makefile +++ b/drivers/soc/qcom/Makefile @@ -15,3 +15,4 @@ obj-$(CONFIG_QCOM_SMP2P) += smp2p.o obj-$(CONFIG_QCOM_SMSM) += smsm.o obj-$(CONFIG_QCOM_WCNSS_CTRL) += wcnss_ctrl.o obj-$(CONFIG_QCOM_APR) += apr.o +obj-$(CONFIG_QCOM_KRYO_L2_ACCESSORS) += kryo-l2-accessors.o diff --git a/drivers/soc/qcom/kryo-l2-accessors.c b/drivers/soc/qcom/kryo-l2-accessors.c new file mode 100644 index 000000000000..75fd07a5a886 --- /dev/null +++ b/drivers/soc/qcom/kryo-l2-accessors.c @@ -0,0 +1,56 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2018, The Linux Foundation. All rights reserved. + */ + +#include <linux/spinlock.h> +#include <asm/sysreg.h> +#include <soc/qcom/kryo-l2-accessors.h> + +#define L2CPUSRSELR_EL1 sys_reg(3, 3, 15, 0, 6) +#define L2CPUSRDR_EL1 sys_reg(3, 3, 15, 0, 7) + +static DEFINE_RAW_SPINLOCK(l2_access_lock); + +/** + * kryo_l2_set_indirect_reg() - write value to an L2 register + * @reg: Address of L2 register. + * @value: Value to be written to register. + * + * Use architecturally required barriers for ordering between system register + * accesses, and system registers with respect to device memory + */ +void kryo_l2_set_indirect_reg(u64 reg, u64 val) +{ + unsigned long flags; + + raw_spin_lock_irqsave(&l2_access_lock, flags); + write_sysreg_s(reg, L2CPUSRSELR_EL1); + isb(); + write_sysreg_s(val, L2CPUSRDR_EL1); + isb(); + raw_spin_unlock_irqrestore(&l2_access_lock, flags); +} +EXPORT_SYMBOL(kryo_l2_set_indirect_reg); + +/** + * kryo_l2_get_indirect_reg() - read an L2 register value + * @reg: Address of L2 register. + * + * Use architecturally required barriers for ordering between system register + * accesses, and system registers with respect to device memory + */ +u64 kryo_l2_get_indirect_reg(u64 reg) +{ + u64 val; + unsigned long flags; + + raw_spin_lock_irqsave(&l2_access_lock, flags); + write_sysreg_s(reg, L2CPUSRSELR_EL1); + isb(); + val = read_sysreg_s(L2CPUSRDR_EL1); + raw_spin_unlock_irqrestore(&l2_access_lock, flags); + + return val; +} +EXPORT_SYMBOL(kryo_l2_get_indirect_reg); diff --git a/include/soc/qcom/kryo-l2-accessors.h b/include/soc/qcom/kryo-l2-accessors.h new file mode 100644 index 000000000000..673c5344afe3 --- /dev/null +++ b/include/soc/qcom/kryo-l2-accessors.h @@ -0,0 +1,12 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2018, The Linux Foundation. All rights reserved. + */ + +#ifndef __SOC_ARCH_QCOM_KRYO_L2_ACCESSORS_H +#define __SOC_ARCH_QCOM_KRYO_L2_ACCESSORS_H + +void kryo_l2_set_indirect_reg(u64 reg, u64 val); +u64 kryo_l2_get_indirect_reg(u64 reg); + +#endif

[v13,1/8] soc: qcom: Separate kryo l2 accessors from PMU driver

Commit Message

Patch