diff mbox series

[v2,2/8] dt-bindings: olpc,ap-sp: add GPIO lines

Message ID 20181010142504.233467-3-lkundrak@v3.sk (mailing list archive)
State Not Applicable
Headers show
Series OLPC 1.75 Keyboard/Touchpad fixes | expand

Commit Message

Lubomir Rintel Oct. 10, 2018, 2:24 p.m. UTC 
Add properties describing the GPIO lines used by the keyboard controller.
The olpc-apsp driver will do happily without them, but they are still part
of the hardware description. The driver could still reserve the lines,
so that nothing else touches them.

This makes the device node almost compatible with "ps2-gpio". I'm not
adding a compatible property, because ps2-gpio would use a different
interrupt, so that we'd need to name it. And I haven't actually tried it.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
---
 Documentation/devicetree/bindings/serio/olpc,ap-sp.txt | 6 ++++++
 1 file changed, 6 insertions(+)

Comments

Pavel Machek Nov. 4, 2018, 11:49 a.m. UTC | #1 
On Wed 2018-10-10 16:24:58, Lubomir Rintel wrote:
> Add properties describing the GPIO lines used by the keyboard controller.
> The olpc-apsp driver will do happily without them, but they are still part
> of the hardware description. The driver could still reserve the lines,
> so that nothing else touches them.
> 
> This makes the device node almost compatible with "ps2-gpio". I'm not
> adding a compatible property, because ps2-gpio would use a different
> interrupt, so that we'd need to name it. And I haven't actually tried it.
> 
> Reviewed-by: Rob Herring <robh@kernel.org>
> Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>

Acked-by: Pavel Machek <pavel@ucw.cz>

Again, Rob, could you apply this one?
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/serio/olpc,ap-sp.txt b/Documentation/devicetree/bindings/serio/olpc,ap-sp.txt
index 36603419d6f8..2b1b1dbb54c1 100644
--- a/Documentation/devicetree/bindings/serio/olpc,ap-sp.txt
+++ b/Documentation/devicetree/bindings/serio/olpc,ap-sp.txt
@@ -7,6 +7,10 @@  Required properties:
 - clocks : phandle + clock-specifier for the clock that drives the WTM
 - clock-names:  should be "sp"
 
+Optional properties:
+- data-gpios : GPIO line used for PS/2 interface data
+- clk-gpios : GPIO line used for PS/2 interface clock
+
 Example:
 	ap-sp@d4290000 {
 		compatible = "olpc,ap-sp";
@@ -14,4 +18,6 @@  Example:
 		interrupts = <40>;
 		clocks = <&soc_clocks MMP2_CLK_SP>;
 		clock-names = "sp";
+		data-gpios = <&gpio 72 GPIO_ACTIVE_HIGH>;
+		clk-gpios = <&gpio 71 GPIO_ACTIVE_HIGH>;
 	}